Liquid-Road-Ultra_TDS.pdf
PDF 170 KB Posted
- Attached to
- Competitive Selection OH|DOT801L26-2
- Contract number
- DOT801L26-2
- Issued by
- Ohio
About this file
This document is a Technical Data Sheet (SMT-156) for SealMaster's Liquid Road Ultra Pavement Sealer, revised on 03/18/24. The document is a detailed product specification sheet for a polymer-modified, fiber-reinforced asphalt emulsion coating designed for application on roads and streets, meeting ASTM D8099/D8099M-17 Standard Specification for Asphalt Emulsion Pavement Sealer.
The product is a factory-blended aggregate pavement sealer that covers approximately 33-37 square feet per gallon per coat, with a recommended two-coat application process. It is designed for protecting and beautifying various pavement surfaces including roads, streets, parking lots, and driveways. The sealer offers high durability, slip resistance, and meets numerous performance characteristics tested across various ASTM standards, including water resistance, adhesion strength, abrasion resistance, and flexibility. SealMaster supports the product through a national network of manufacturing and distribution facilities and qualified applicators, with availability for plant pickup or bulk tanker load quantities.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT DESCRIPTION
LIQUID ROAD ULTRA PAVEMENT SEALER FOR ROADS is a polymer-modified, fiber reinforced asphalt emulsion coating that contains specifically graded aggregate and is applied to bituminous pavement surfaces. Liquid Road Ultra is a ready to apply material that is factory blended with aggregate. Liquid Road Ultra is a highly durable, slip-resistant surface treatment that greatly extends pavement service life. Liquid Road Ultra Pavement Sealer meets ASTM D8099/D8099M-17 Standard Specification for Asphalt Emulsion Pavement Sealer.
USES
Liquid Road Ultra is ideal for protecting and beautifying all types of pavement surfaces including Roads, Streets, Parking Lots, Shopping Malls, Driveways, Roadways and more. This particular specification pertains to Liquid Road Ultra application on Roads and Streets. (For application on parking lots, see SMT-155)
ESTIMATING MATERIAL REQUIREMENTS
One gallon of Liquid Road Ultra for application on Roads and Streets will cover approximately 33-37 square feet per coat (3.66-4.11 square yards per coat). Multi-coat application is recommended for optimum durability (See APPLICATION PROCEDURES below).
APPLICATION RATE
Apply Liquid Road Ultra for applications on Roads and Streets at a rate of 33-37 square feet per coat (3.66-4.11 square yards per coat). Application rates may vary due to pavement porosity and method of application.
PERFORMANCE CHARACTERISTICS
Table 1 - Physical Requirements Of Liquid Road Ultra For Road Application
ASTM Test Description Result
D2939-8 Residue by Evaporation, % 45-65%
E303 Measuring Surface Frictional Properties- British Pendulum Tester
Min. 60 BPN
E274 Locked Wheel Skid Testing > 30 SN
D4060 Abrasion Resistance- Taber Abraser Dry Method < 1% Loss
D3910-6.4 Wet Track Abrasion Test < 25g/ft² Loss
D5 Penetration of Bituminous Materials-Base Asphalt
12-45 Pen
D113 Ductility of Bituminous Materials-Base Asphalt 5-15 cm
Std. % Percent Polymer Solids to Asphalt by wt. 3% min.
E70 PH of Aqueous Solutions with Glass Electrodes 6-10 PH
D6378 Vapor Pressure (VPX), mm Hg @ 25° C (77° F) 22-26 mm Hg
D36 Softening Point of Emulsion Residue (Ring and Ball Apparatus)
> 200° F
D562 Viscosity using a Stormer-Type Viscometer 60-110 KU
D870 Water Resistance of Coatings using Water Immersion
No Delamination
D6904 Resistance to Wind-Driven Rain No Delamination
D4585 Water Resistance of Coatings Using Controlled Condensation
No Delamination
D1735 Water Resistance of Coatings Using Water Fog Apparatus
No Delamination
D2247 Water Resistance of Coatings in 100% Relative Humidity
No Delamination
D4541 Adhesion Strength over Asphalt Pavement > 200 PSI
D2939-7 Weight per Gallon 10-12 lbs./gal
D2939-13 Drying Time- 50% humidity, 73.4 ± 3.6°F 2-6 Hrs.
D2939-14 Resistance to Heat- No Blistering, sagging or slipping
PASS
D2939-15 Resistance to water- No softening, delamination or re-emulsification
PASS
D2939-16 Flexibilty- No Cracking or Delamination PASS
D2939-26 Resistance to Impact- No Chipping, Cracking or Delamination
PASS
D2939-27 Resistance to Impact After Accelerated Weathering
PASS
D4799 QUV UV Aging-1,000 Hours No Color Fade
D3359 Measuring Adhesion by Tape- No More than a Trace of Peeling
PASS
Volatile Organic Compounds
Determination of Volatile Organic Compounds (VOC) in various Coatings
< 10 g/l
PAH
Content (Percentage)
Polycyclic Aromatic Hydrocarbon Content (Percentage)
Less than one-tenth of 1% (< .10%)
D2939-5 Uniformity PASS
D2939-22 Wet Film Continuity PASS
D95 Water Content, % 35-55%
D2939-10 Ash Content of Residue, % 66-76%
SURFACE PREPARATIONS
Surface must be clean and free from loose material and dirt. Cracks should be filled with SealMaster Cold or Hot-Applied Crack Filling Materials. Oil stains should be cleaned and primed with SealMaster Oil Spot Primer.
APPLICATION EQUIPMENT
Liquid Road Ultra for Roads shall be applied by mechanical squeegee and or brush equipment. Equipment shall have continuous agitation or mixing capabilities to maintain homogeneous consistency of mixed material throughout the application process. Truck mount or self-propelled squeegee/brush equipment shall have at least 2 squeegee or brush devices (one behind the other) to assure adequate distribution and penetration of Liquid Road Ultra into bituminous pavement. Hand squeegees and brushes shall be acceptable in areas where practicality prohibits the use of mechanized equipment.
REVISED 03/18/24
Technical Data Sheet
SMT-156
LIQUID ROAD ULTRA
For Application on Roads
Factory Blended with Aggregate
MIXING PROCEDURES
Mix Liquid Road Ultra thoroughly before applying. If needed, a small amount of water may be added to facilitate application.
APPLICATION PROCEDURES
To achieve optimum performance and the desired results for Liquid Road Ultra, it is important to follow proper application procedures. The following two coat process is recommended for optimum performance and durability:
1. Apply, by squeegee application, the first coat of Liquid Road Ultra at a rate of 33-37 square feet (3.66-4.11 square yards) per gallon. Allow first coat to dry thoroughly before applying the second coat.
2. Apply, by squeegee application, the second coat of Liquid Road Ultra at a rate of 33-37 square feet (3.66-
4.11 square yards) per gallon. Allow second coat to dry thoroughly before opening to traffic.
APPLICATION WEATHER CONDITIONS
Liquid Road Ultra shall not be applied when temperature is expected to drop below 50° F during application and for a period of at least 24 hours after application. Do not apply if rain is imminent or forecast within 12 hours.
LINE STRIPING AND TRAFFIC MARKINGS
Use SealMaster Traffic Paints for line striping and traffic markings.
PACKAGING AND AVAILABILITY
Liquid Road Ultra is available for plant pick up or bulk tanker load quantities. Liquid Road Ultra is supported by a national network of SealMaster manufacturing and distribution facilities along with a national network of qualified applicators.
WARRANTY AND DISCLAIMER
The statements made on this technical data sheet are believed to be true and accurate and are intended to provide a guide for approved application practices.
As workmanship, weather, construction, condition of pavement, tools utilized, and other variables affecting results are all beyond our control, the manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. The manufacturer expressly disclaims any implied warranties of merchantability or fitness for a particular purpose.
Copyright © InFrasys, Inc. All rights reserved. Reproduction of any of this material is strictly prohibited.
Phone: 1-800-395-7325 www.sealmaster.net
LIQUID ROAD ULTRA
For Application on Roads
Factory Blended with Aggregate
REVISED 03/18/24
Technical Data Sheet
SMT-156
File details come from the government source that posted it. Updated .