CrackMaster-PF_Type-IV_COC.pdf
PDF 220 KB Posted
- Attached to
- Competitive Selection OH|DOT801L26-2
- Contract number
- DOT801L26-2
- Issued by
- Ohio
About this file
This document is a Certificate of Compliance dated March 24, 2025, issued by P&T Products, a manufacturer of crack and joint sealants. The certificate pertains to the CrackMaster PF4 product, which meets the requirements of the Ohio Department of Transportation (Ohio DOT) Type IV specifications. The product specifications were tested in accordance with multiple ASTM standards (D 5239, 36, modified 3111 and 4402).
The certificate provides detailed technical specifications for two product variants: Dura-Fill PF4 and a Modified Binder. Key specifications include maximum safe heating temperature (400°F), application temperature range (370-390°F), heating time (12 hours max), penetration measurements, flow characteristics, softening point, low temperature flexibility, viscosity, and optimum climate performance. The product is designed for crack and joint sealing applications, with performance characteristics suitable for temperature ranges from -29°C to 32°C (-20°F to 90°F). The document demonstrates the product's compliance with technical standards and its suitability for road construction and maintenance applications.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Certificate of Compliance March 24, 2025
Product : CrackMaster PF4
CrackMaster PF4 as supplied meets all requirements of Ohio DOT Type IV.
The product specifications are as follows when tested in accordance with ASTM D 5239, 36, modified 3111 and 4402.
Regards, Dura-Fill PF4 Modified Binder
Maximum Safe Heating Temp 400º F Max. 400º F Max.
Application Temp 370º-390º F 370º-390º F
Heating Time 12 Hours Max. 12 Hours Max.
Penetration @ 77º F 25-45 dmm 90 dmm Max.
Flow @ 140º F 0 mm Max. 5 mm Max.
Bond: 0º F / 100 % Extension NA 5 Cycles Passed
Softening Point 190º F Min. 176º F Min.
Low Temperature Flexibility - 20º F Pass NA
Viscosity @ 375º F 100+ Poise 20 Poise Max.
Ductility @ 77º F NA 40 cm Min.
Specific Gravity 1.21 Approximately NA
Polyester Fiber Content (by Weight of Asphaltic Components) 2% Min. NA
Asphalt Compatibility Pass Pass
Flash Point 400º F Min. 400º F Min.
Optimum Climate (Average Temperatures) -29º / 32º C Or -20º / 90º F
Manufacturer of Crack and Joint Sealants
Julia Bitter Chemist
File details come from the government source that posted it. Updated .