RFB OCWUT 03-26 Exhibit A Technical Drawings.pdf
PDF 4 MB Posted
- Attached to
- Meter Boxes and Meter Lids State and local contract opportunity
- Solicitation number
- OCWUT 03-26
- Issued by
- Oklahoma County, Oklahoma
About this file
This document is a technical specification from the Oklahoma City Utilities Department for water meter boxes and lids, specifically detailed in the OCWUT 03-26: Exhibit A - Meter Box Technical Drawings. The specifications cover multiple sizes of high-density polyethylene meter boxes (12" and 18" heights) with precise dimensional requirements, designed for single-wall construction without foaming agents. The meter boxes are engineered to withstand H-20 loading in non-deliberate or incidental traffic areas, featuring black coloration to prevent UV degradation, crush-resistant ribbing, removable pre-cut pipe entry areas, and an integral flange-type lid.
The technical drawings specify detailed manufacturing requirements for the meter boxes and lids, produced by DFW Plastics, Inc. or an approved equivalent. The specifications mandate strict quality controls, including minimum weight requirements (ranging from 17 to 36 lbs depending on box size), single-wall design, and specific feature requirements such as a molded key hole design, integral AMR/AMI device mount, and a tread pattern with precise dimensional specifications. Each meter box and lid must contain the manufacturer's name and part number, and include features like a brass key keyhole and specific wall thickness minimums. The comprehensive drawings provide multiple view perspectives including top, bottom, length, width, and side views to ensure precise manufacturing standards.
View the file
Other files for this state and local contract opportunity
| File | Type | Posted |
|---|---|---|
| RFB OCWUT 03-26 Exhibit B- Chain of Custody Delivery Form.pdf | ||
| RFB Procurement Pricing Agreement.pdf | ||
| Sample RFB Procurement Acord Form.pdf | ||
| RFB Letter of Authorization.pdf | ||
| RFB Special Provisions OCWUT 03-26 Meter Boxes and Meter Lids.pdf | ||
| RFB Vendor Contact Form.pdf | ||
| PromptDiscount_Solicitation Questions.xlsx | XLSX spreadsheet | |
| RFB Procurement Bid Specifications.pdf | ||
| RFB Procurement General Instructions.pdf | ||
| RFB NTB OCWUT 03-26 Meter Boxes and Meter Lids.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LID SIDE VIEW
TYPICAL SPECIFICATIONS:
THE METER BOX SHALL BE HIGH-DENSITY POLYETHYLENE OF ONE-PIECE MOLDED CONSTRUCTION WITHOUT A FOAMING AGENT FOR DURABILITY
AND IMPACT STRENGTH AND SHALL HAVE A SINGLE WALL DESIGN. THE METER BOX SHALL BE ABLE TO WITHSTAND AN H-20 LOADING IN NON
DELIBERATE OR INCIDENTAL TRAFFIC AREAS. THE METER BOX SHALL BE BLACK. THE BOX SHALL HAVE CRUSH RESISTANT RIBBING ALONG THE
OUTSIDE OF THE BOX. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS TO HAVE AN INTEGRAL FLANGE TYPE LID AS SPECIFIED ON THE DRAWING.
THE BOX SHALL HAVE REMOVABLE PRE-CUT PIPE ENTRY AREAS LOCATED ON THE CENTER OF EACH END (SHORT SIDE) OF THE BOX FOR THE
SINGLE METER INSTALLATIONS. THE BOX SHALL BE DESIGNED IN SUCH A WAY TO BE SECURELY STACKABLE. THE BOX SHALL WEIGH NO LESS
THAN 18 LBS. ALL DIMENSIONS ARE PRODUCTION MEASUREMENTS AND SHALL BE IN ACCORDANCE WITH THE ABOVE DRAWING. COVER SHALL BE
ANTI-FLOAT BLACK REBAR MOLDED POLYMER LID WITH A SINGLE WALL DESIGN AND A MINIMUM WALL THICKNESS AS SPECIFIED. THE LID WEIGHT
SHALL BE A MINIMUM OF 8 LBS. THE LID SHALL NOT HAVE A FOAMING PLASTIC OR BLOWING AGENT THAT CREATES AIR POCKETS. LIDS SHALL
CONTAIN A MOLDED KEY HOLE DESIGN. LID SHALL HAVE AN INTEGRAL MOLDED SLIDE MOUNT FOR AMR DEVICE THAT SHALL BE MOLDED AS ONE
PIECE. THE LID SHALL CONTAIN TREAD PATTERN AS ILLUSTRATED WITH DIMENSION PER TREAD OF 0.188" X 0.938" X 0.150" DEEP. LID SHALL
CONTAIN THE NAME OF THE MANUFACTURER AND PART NUMBER. THE METER BOX AND LID SHALL BE MANUFACTURED BY DFW PLASTICS, INC. OR
APPROVED EQUIVALENT.
LID TOP VIEW
PART # 4
CO.
WATER METER
C O
M A
D E
IN
U
S
AP
A R
T #2
15 1/2"
10 1/8"
18 1/4"
15 3/4"
24 3/4"
22"
10 1/2"
12 5/8"
16"
18 1/2"
6 3/8"
18 1/2"
1 3/4"
LID BOTTOM VIEW
LENGTH VIEW
WIDTH VIEW
4"
3"
KEYHOLE FOR
BRASS KEY
LOCK
Ø4-5/8 x 1/4 DEEP
RECESS FOR AMR PAD W/
Ø1.88 x 2.50 KNOCKOUT
PLUG FOR ENDPOINT
1"
11 7/8"
1 1/8"
22 3/4"
16 1/2"
1" LETTERS
O K
L A
H O
M A
C
I T
Y
U
T I L
I T
I E
S
D
E P
A R
T M
E N
T
WATER STANDARD DETAIL
W
T
O
M
E T
E R
B
O X
F
G
A
S S
Y
A
R E
A S
D A
T E
OCWUT 03-26: EXHIBIT A - Meter Box Technical Drawings
THE METER BOX SHALL BE HIGH-DENSITY POLYETHYLENE OF ONE-PIECE MOLDED CONSTRUCTION WITHOUT A FOAMING AGENT FOR DURABILITY AND
IMPACT STRENGTH AND SHALL HAVE A SINGLE WALL DESIGN. THE METER BOX SHALL BE ABLE TO WITHSTAND AN H-20 LOADING IN NON DELIBERATE
OR INCIDENTAL TRAFFIC AREAS. THE METER BOX SHALL BE BLACK TO PREVENT UV DEGRADATION. THE BOX SHALL HAVE CRUSH RESISTANT RIBBING
ALONG THE OUTSIDE OF THE BOX. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS TO HAVE AN INTEGRAL FLANGE TYPE LID AS SPECIFIED ON THE
DRAWING. THE BOX SHALL HAVE REMOVABLE PRE-CUT PIPE ENTRY AREAS LOCATED ON THE CENTER OF EACH END (SHORT SIDE) OF THE BOX FOR
SINGLE METER INSTALLATIONS. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS TO BE SECURELY STACKABLE. THE BOX SHALL WEIGH NO LESS THAN
18 LBS FOR 12" HEIGHT AND NO LESS THAN 36 LBS FOR 18" HEIGHT FOR SAFETY AND EASE OF HANDLING, TRANSPORT AND INSTALLATION. ALL
DIMENSIONS ARE MINIMUM PRODUCTION MEASUREMENTS AND SHALL BE IN ACCORDANCE WITH THE ABOVE DRAWING (S) FOR THE APPROPRIATE SIZE
METER. COVER SHALL BE ANTI-FLOAT BLACK REBAR MOLDED POLYMER LID OR BLACK OVERLAY WITH A 0.25" METAL PLATE WITH A SINGLE WALL DESIGN AND A MINIMUM WALL DESIGN AND MINIMUM THICKNESS AS SPECIFIED. THE LID WEIGHT SHALL BE A MINIMUM OF 40 LBS. THE LID SHALL NOT HAVE A FOAMING PLASTIC OR BLOWING AGENT THAT CREATES AIR POCKETS. LID SHALL CONTAIN A MOLDED KEY HOLE DESIGN. LID SHALL HAVE AN INTEGRAL MOLDED SLIDE MOUNT FOR AMR DEVICE THAT SHALL BE MOLDED AS A ONE PIECE UNIT AS SPECIFIED IN THE ABOVE DRAWING. THE LID SHALL CONTAIN THE TREAD PATTEN AS ILLUSTRATED WITH DIMENSION PER TREAD OF 0.188" X 0.938" X 0.150" DEEP. LID SHALL CONTAIN THE NAME OF THE MANUFACTURER AND PART NUMBER. THE
METER BOX AND LID SHALL BE MANUFACTURED BY DFW PLASTICS, INC. OR APPROVED EQUIVALENT.
LENGTH VIEW
2.5"
4"
19.75"
23.25"
33.5"
23.875"
23.25"
TOP VIEW
WIDTH VIEW
TOP VIEW WITH LID
30.25"
18.5"
LID TOP VIEW
LID SIDE VIEW
1.875"
LID BOTTOM VIEW
30.5"
WALL
0.375" MIN.
1" x 0.150" RAISED
"WATER METER"
31.875" IWA
21.375" IWA
BOTTOM VIEW
SIDES ARE
BOWED
OUT 0.5"
BOTTOM FLANGE
2.25" WIDE
*IWA- INSIDE WORK AREA
20.125
3.75
2.75
32.125"
20.5"
KISS OFF DETAIL
SECTION A-A
D F
W P
L A
S T
IC
S
, I N
C WATER
METER
P A
T . P
E N
D
COMPANY
W A
T E
R M E
T E
R
PAT. PEND.
A
A
10"
PICK HOLE POCKET
3"X0.5625"X1.25" DEEP
WITH 0.1875 Ø 304SS ROD
KEYHOLE FOR
BRASS KEY
MOLDED
AMR/AMI MOUNT
O K
L A
H O
T
Y
U
T I L
I T
I E
S
D
E P
A R
T M
E N
T
WATER DETAIL
W
T
O
M
E T
F
S
P E
C I A
L
A
P P
L I C
A T
I O
N
N
V
D
E
A
D A
T E
THE METER BOX SHALL BE HIGH-DENSITY POLYETHYLENE OF ONE-PIECE MOLDED CONSTRUCTION WITHOUT A FOAMING AGENT FOR
DURABILITY AND IMPACT STRENGTH AND SHALL HAVE A SINGLE WALL DESIGN. THE METER BOX SHALL BE ABLE TO WITHSTAND AN H-20
LOADING IN NON DELIBERATE OR INCIDENTAL TRAFFIC AREAS. THE METER BOX SHALL BE BLACK TO PREVENT UV DEGRADATION. THE BOX
SHALL HAVE CRUSH RESISTANT RIBBING ALONG THE OUTSIDE OF THE BOX. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS TO HAVE AN
INTEGRAL FLANGE TYPE LID AS SPECIFIED ON THE DRAWING. THE BOX SHALL HAVE REMOVABLE PRE-CUT PIPE ENTRY AREAS LOCATED ON
THE CENTER OF EACH END (SHORT SIDE) OF THE BOX FOR SINGLE METER INSTALLATIONS. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS
TO BE SECURELY STACKABLE. THE BOX SHALL WEIGH NO LESS THAN 17 LBS FOR 12" HEIGHT AND NO LESS THAN 22 LBS FOR 18" HEIGHT FOR
SAFETY AND EASE OF HANDLING, TRANSPORT AND INSTALLATION. ALL DIMENSIONS ARE MINIMUM PRODUCTION MEASUREMENTS AND SHALL
BE IN ACCORDANCE WITH THE ABOVE DRAWING (S) FOR THE APPROPRIATE SIZE METER. COVER SHALL BE ANTI-FLOAT BLACK REBAR MOLDED POLYMER LID WITH A SINGLE WALL DESIGN AND A MINIMUM WALL DESIGN AND MINIMUM THICKNESS AS SPECIFIED. THE LID WIGHT SHALL BE A MINIMUM OF 13 LBS. THE LID SHALL NOT HAVE A FOAMING PLASTIC OR BLOWING AGENT THAT CREATES AIR POCKETS. LID SHALL CONTAIN A MOLDED KEY HOLE DESIGN. LID SHALL HAVE AN INTEGRAL MOLDED SLIDE MOUNT FOR AMR DEVICE THAT SHALL BE MOLDED AS A ONE PIECE UNIT AS SPECIFIED IN THE ABOVE DRAWING. THE LID SHALL CONTAIN THE TREAD PATTEN AS ILLUSTRATED WITH DIMENSION PER TREAD OF 0.188" X 0.938" X 0.150" DEEP. LID SHALL CONTAIN THE NAME OF THE MANUFACTURER AND PART NUMBER. THE METER BOX AND LID SHALL BE MANUFACTURED BY DFW PLASTICS, INC. OR APPROVED EQUIVALENT.
LENGTH VIEW
WATER
METER
P A
R T
C O
M A
D E
IN
U
S A
2.5"
3.25"
11.5"
14.5"
20.875"
12" or
18"
18.125"
11.5"
19.125" IWA
10.4375" IWA
TOP VIEW
WIDTH VIEW
TOP VIEW WITH LID
17.875"
11.125"
Ø4.625" x 0.25" DEEP
RECESS FOR AMR PAD
W/ Ø1.88" x 2.50" SLOT
KNOCK OUT FOR AMR
LID TOP VIEW
LID SIDE VIEW
1.75"
LID BOTTOM VIEW
KEYHOLE FOR
BRASS KEY
MOLDED
AMR/AMI MOUNT
P A
R T #
4C O
P A
R T #
4C O
WATER
METER
P A
R T
C
O
M
A D
E
IN
U S
A
18.125"
19.5"
WALL
0.375" MIN.
1" x 0.150" RAISED
"WATER METER"
*IWA- INSIDE WORK AREA
12.125"
C
A
B
A B C
3.5" 2.5" 7.625"
3.375" 13.5"2.375"
HEIGHT
12"
18"
O K
L A
H O
T
Y
U
T I L
I T
I E
S
D
E P
A R
T M
E N
T
WATER STANDARD DETAIL
W
T
O
M
E T
G
R A
V
E
A S
D A
T E
THE METER BOX SHALL BE HIGH-DENSITY POLYETHYLENE OF ONE-PIECE MOLDED CONSTRUCTION WITHOUT A FOAMING AGENT FOR
DURABILITY AND IMPACT STRENGTH AND SHALL HAVE A SINGLE WALL DESIGN. THE METER BOX SHALL BE ABLE TO WITHSTAND AN H-20
LOADING IN NON DELIBERATE OR INCIDENTAL TRAFFIC AREAS. THE METER BOX SHALL BE BLACK TO PREVENT UV DEGRADATION. THE
BOX SHALL HAVE CRUSH RESISTANT RIBBING ALONG THE OUTSIDE OF THE BOX. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS TO
HAVE AN INTEGRAL FLANGE TYPE LID AS SPECIFIED ON THE DRAWING. THE BOX SHALL HAVE REMOVABLE PRE-CUT PIPE ENTRY AREAS
LOCATED ON THE CENTER OF EACH END (SHORT SIDE) OF THE BOX FOR SINGLE METER INSTALLATIONS. THE BOX SHALL BE DESIGNED
IN SUCH A WAY AS TO BE SECURELY STACKABLE. THE BOX SHALL WEIGH NO LESS THAN 20 LBS FOR 12" HEIGHT AND NO LESS THAN 29
LBS FOR 18" HEIGHT FOR SAFETY AND EASE OF HANDLING, TRANSPORT AND INSTALLATION. ALL DIMENSIONS ARE MINIMUM
PRODUCTION MEASUREMENTS AND SHALL BE IN ACCORDANCE WITH THE ABOVE DRAWING (S) FOR THE APPROPRIATE SIZE METER.
COVER SHALL BE ANTI-FLOAT BLACK REBAR MOLDED POLYMER LID WITH A SINGLE WALL DESIGN AND A MINIMUM WALL DESIGN AND MINIMUM THICKNESS AS SPECIFIED. THE LID WEIGHT SHALL BE A MINIMUM OF 21 LBS. THE LID SHALL NOT HAVE A FOAMING PLASTIC OR BLOWING AGENT THAT CREATES AIR POCKETS. LID SHALL CONTAIN A MOLDED KEY HOLE DESIGN. LID SHALL HAVE AN INTEGRAL MOLDED SLIDE MOUNT FOR AMR DEVICE THAT SHALL BE MOLDED AS A ONE PIECE UNIT AS SPECIFIED IN THE ABOVE DRAWING. THE LID SHALL CONTAIN THE TREAD PATTEN AS ILLUSTRATED WITH DIMENSION PER TREAD OF 0.188" X 0.938" X 0.150" DEEP. LID SHALL CONTAIN THE NAME OF THE MANUFACTURER AND PART NUMBER. THE METER BOX AND LID SHALL BE MANUFACTURED BY DFW PLASTICS, INC. OR APPROVED EQUIVALENT.
LENGTH VIEW
3"
4"
14.25"
17.5"
26.875"
12" or
18"
24"
14.25"
TOP VIEW
WIDTH VIEW
TOP VIEW WITH LID
23.1875"
13.875"
Ø4.625" x 0.25" DEEP
RECESS FOR AMR PAD
W/ Ø1.88" x 2.50" SLOT
KNOCK OUT FOR AMR
LID TOP VIEW
LID SIDE VIEW
1.75"
LID BOTTOM VIEW
24"
26.125"
WALL
0.375" MIN.
KEYHOLE FOR
BRASS KEY
MOLDED
AMR/AMI MOUNT
1" x 0.150" RAISED
"WATER METER"
P A
R T #
C O
P A
R T #
C O
WATER
C O
P A
R T
METER
WATER
C O
P A
R T
METER
24.8125" IWA
13.25" IWA
*IWA- INSIDE WORK AREA
14.9375"
A B C
3.5" 2.625"7.875"
3.375" 13.875"2.5"
HEIGHT
12"
18"
C
A
B
O K
L A
H O
T
Y
U
T I L
I T
I E
S
D
E P
A R
T M
E N
T
WATER DETAIL
W
T
O
M
E T
G
R A
V
E
A S
D A
T E
THE METER BOX SHALL BE HIGH-DENSITY POLYETHYLENE OF ONE-PIECE MOLDED CONSTRUCTION WITHOUT A FOAMING AGENT FOR
DURABILITY AND IMPACT STRENGTH AND SHALL HAVE A SINGLE WALL DESIGN. THE METER BOX SHALL BE ABLE TO WITHSTAND AN H-20
LOADING IN NON DELIBERATE OR INCIDENTAL TRAFFIC AREAS. THE METER BOX SHALL BE BLACK TO PREVENT UV DEGRADATION. THE
BOX SHALL HAVE CRUSH RESISTANT RIBBING ALONG THE OUTSIDE OF THE BOX. THE BOX SHALL BE DESIGNED IN SUCH A WAY AS TO
HAVE AN INTEGRAL FLANGE TYPE LID AS SPECIFIED ON THE DRAWING. THE BOX SHALL HAVE REMOVABLE PRE-CUT PIPE ENTRY AREAS
LOCATED ON THE CENTER OF EACH END (SHORT SIDE) OF THE BOX FOR SINGLE METER INSTALLATIONS. THE BOX SHALL BE DESIGNED
IN SUCH A WAY AS TO BE SECURELY STACKABLE. THE BOX SHALL WEIGH NO LESS THAN 31 LBS FOR 12" HEIGHT AND NO LESS THAN 36
LBS FOR 18" HEIGHT FOR SAFETY AND EASE OF HANDLING, TRANSPORT AND INSTALLATION. ALL DIMENSIONS ARE MINIMUM
PRODUCTION MEASUREMENTS AND SHALL BE IN ACCORDANCE WITH THE ABOVE DRAWING (S) FOR THE APPROPRIATE SIZE METER.
COVER SHALL BE ANTI-FLOAT BLACK REBAR MOLDED POLYMER LID WITH A SINGLE WALL DESIGN AND A MINIMUM WALL DESIGN AND MINIMUM THICKNESS AS SPECIFIED. THE LID WEIGHT SHALL BE A MINIMUM OF 37 LBS. THE LID SHALL NOT HAVE A FOAMING PLASTIC OR BLOWING AGENT THAT CREATES AIR POCKETS. LID SHALL CONTAIN A MOLDED KEY HOLE DESIGN. LID SHALL HAVE AN INTEGRAL MOLDED SLIDE MOUNT FOR AMR DEVICE THAT SHALL BE MOLDED AS A ONE PIECE UNIT AS SPECIFIED IN THE ABOVE DRAWING. THE LID SHALL CONTAIN THE TREAD PATTEN AS ILLUSTRATED WITH DIMENSION PER TREAD OF 0.188" X 0.938" X 0.150" DEEP. LID SHALL CONTAIN THE NAME OF THE MANUFACTURER AND PART NUMBER.THE METER BOX SHALL AND LID BE MANUFACTURED BY DFW PLASTICS, INC. OR APPROVED EQUIVALENT.
P A
R T
C O
PART #4
CO.
WATER
METER
P A
R T
** C O
M A
D E
IN
U
S A
W A
T E
R M E
T E
R
PART #
CO.MADE
IN USA
LENGTH VIEW
3"
4"
18"
21.125"
34"
12" or
18"
31"
18"
TOP VIEW
WIDTH VIEW
TOP VIEW WITH LID
30.5"
17.625"
Ø4.625" x 0.25" DEEP
RECESS FOR AMR PAD
W/ Ø1.88" x 2.50" SLOT
KNOCK OUT FOR AMR
LID TOP VIEW
LID SIDE VIEW
1.875"
LID BOTTOM VIEW
31"
WALL
0.375" MIN.
KEYHOLE FOR
BRASS KEY
MOLDED
AMR/AMI MOUNT
1" x 0.150" RAISED
"WATER METER"
31.75" IWA
16.3125" IWA
BOTTOM VIEW
SIDES ARE
BOWED
OUT 0.5"
BOTTOM FLANGE
2.25" WIDE
*IWA- INSIDE WORK AREA
A B C
3.125" 2.25" 7.5"
3.125" 13.5"2.25"
HEIGHT
12"
18"
C
A
B
33.25"
17.625"
O K
L A
H O
T
Y
U
T I L
I T
I E
S
D
E P
A R
T M
E N
T
WATER DETAIL
W
T
O
M
E T
G
R A
V
E
A S
D A
T E
| Sheets and Views |
| WAT-STD-DET-2016-W-24 |
| WAT-STD-DET-2016-W-25 |
| WAT-STD-DET-2016-W-26 |
| WAT-STD-DET-2016-W-27 |
| WAT-STD-DET-2016-W-28 |
File details come from the government source that posted it. Updated .