The file's text, extracted by GovTribe without its formatting.
04-436
08-811
SECTION 01420 - REFERENCES
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including Sections A through M of the Contract and other Division 1 Specification Sections, apply to this Section.
1.2 DEFINITIONS
A. General: Basic Contract definitions are included in the Conditions of the Contract.
B. Refer to Federal Acquisition Requirements (F.A.R.) clauses and General Conditions for other definitions. Refer to F.A.R. 52.236-21 and Special Contract Requirements.
C. "Accepted": When used to convey Contracting Officer’s action on Contractor's submittals, applications, and requests, "approved" is limited to Contracting Officer's duties and responsibilities as stated in the Conditions of the Contract.
D. "Directed": A command or instruction by Contracting Officer. Other terms including "requested," "authorized," "selected," "approved," "required," and "permitted" have the same meaning as "directed."
E. "Indicated": Requirements expressed by graphic representations or in written form on Drawings, in Specifications, and in other Contract Documents. Other terms including "shown," "noted," "scheduled," and "specified" have the same meaning as "indicated."
F. "Regulations": Laws, ordinances, statutes, and lawful orders issued by authorities having jurisdiction, and rules, conventions, and agreements within the construction industry that control performance of the Work.
G. "Furnish": Supply and deliver to Project site, ready for unloading, unpacking, assembly, installation, and similar operations.
H. "Install": Operations at Project site including unloading, temporarily storing, unpacking, assembling, erecting, placing, anchoring, applying, working to dimension, finishing, curing, protecting, cleaning, and similar operations.
I. "Provide": Furnish and install, complete and ready for the intended use.
J. "Installer": Contractor or another entity engaged by Contractor as an employee, Subcontractor, or Sub-subcontractor, to perform a particular construction operation, including installation, erection, application, and similar operations.
1. Using a term such as "carpentry" does not imply that certain construction activities must be performed by accredited or unionized individuals of a corresponding generic name, such as "carpenter." It also does not imply that requirements specified apply exclusively to trades people of the corresponding generic name.
K. "Experienced": When used with an entity, "experienced" means having successfully completed a minimum of five previous projects similar in size and scope to this Project; being familiar with special requirements indicated; and having complied with requirements of authorities having jurisdiction.
L. "Project Site": Space available for performing construction activities. The extent of Project site is shown on Drawings and may or may not be identical with the description of the land on which Project is to be built.
1.3 INDUSTRY STANDARDS
A. Applicability of Standards: Unless the Contract Documents include more stringent requirements, applicable construction industry standards have the same force and effect as if bound or copied directly into the Contract Documents to the extent referenced. Such standards are made a part of the Contract Documents by reference.
B. Publication Dates: Comply with standards in effect as of date of the Contract Documents, unless otherwise indicated.
C. Conflicting Requirements: If compliance with two or more standards is specified and the standards establish different or conflicting requirements for minimum quantities or quality levels, comply with the most stringent requirement. Refer uncertainties and requirements that are different, but apparently equal, to Contracting Officer for a decision before proceeding.
1. Minimum Quantity or Quality Levels: The quantity or quality level shown or specified shall be the minimum provided or performed. The actual installation may comply exactly with the minimum quantity or quality specified, or it may exceed the minimum within reasonable limits. To comply with these requirements, indicated numeric values are minimum or maximum, as appropriate, for the context of requirements. Refer uncertainties to Contracting Officer for a decision before proceeding.
D. Copies of Standards: Each entity engaged in construction on Project must be familiar with industry standards applicable to its construction activity. Copies of applicable standards are not bound with the Contract Documents.
1. Where copies of standards are needed to perform a required construction activity, obtain copies directly from publication source and make them available on request.
E. Abbreviations and Acronyms for Standards and Regulations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the standards and regulations in the following list. Names, telephone numbers, and Web-site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents.
PRIVATE tbl1@dom1
| ADAAG |
| Americans with Disabilities Act (ADA) |
Accessibility Guidelines for Buildings and Facilities
| Available from Access Board |
| (800) 872-2253 |
| www.access-board.gov |
| (202) 272-5434 |
| CFR |
| Code of Federal Regulations |
| Available from Government Printing Office |
| (888) 293-6498 |
| www.access.gpo.gov/nara/cfr |
| (202) 512-1530 |
| CRD |
| Handbook for Concrete and Cement |
Available from Army Corps of Engineers
| Waterways Experiment Station |
| (601) 634-2355 |
www.wes.army.mil
| DOD |
| Department of Defense Specifications and Standards |
| Available from Defense Automated Printing Service |
| (215) 697-6257 |
www.astimage.daps.dla.mil/online
(See FS)
| Available from Defense Automated Printing Service |
| (215) 697-6257 |
www.astimage.daps.dla.mil/online
| Available from General Services Administration |
| (202) 619-8925 |
www.fss.gsa.gov/pub/fed-specs.cfm
| Available from National Institute of Building Sciences |
| (202) 289-7800 |
www.nibs.org
| FTMS |
| Federal Test Method Standard |
(See FS)
| MILSPEC |
| Military Specification and Standards |
| Available from Defense Automated Printing Service |
| (215) 697-6257 |
www.astimage.daps.dla.mil/online
| UFAS |
| Uniform Federal Accessibility Standards |
| Available from Access Board |
| (800) 872-2253 |
| www.access-board.gov |
| (202) 272-5434 |
1.4 ABBREVIATIONS AND ACRONYMS
A. Industry Organizations: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the following list. Names, telephone numbers, and Web-site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents.
PRIVATE tbl2@dom1
| AA |
| Aluminum Association, Inc. (The) |
| (202) 862-5100 |
www.aluminum.org
| AAADM |
| American Association of Automatic Door Manufacturers |
| (216) 241-7333 |
www.aaadm.com
| AABC |
| Associated Air Balance Council |
| (202) 737-0202 |
www.aabchq.com
| AAMA |
| American Architectural Manufacturers Association |
| (847) 303-5664 |
www.aamanet.org
| AAN |
| American Association of Nurserymen |
(See ANLA)
| AASHTO |
| American Association of State Highway and |
| (202) 624-5800 |
Transportation Officials www.aashto.org
| AATCC |
| American Association of Textile Chemists and Colorists (The) |
| (919) 549-8141 |
www.aatcc.org
| ABMA |
| American Bearing Manufacturers Association |
| (202) 367-1155 |
www.abma-dc.org
| ACI |
| American Concrete Institute/ACI International |
| (248) 848-3700 |
www.aci-int.org
| ACPA |
| American Concrete Pipe Association |
| (972) 506-7216 |
www.concrete-pipe.org
| AEIC |
| Association of Edison Illuminating Companies, Inc. (The) |
| (205) 257-2530 |
www.aeic.org
| AFPA |
| American Forest & Paper Association |
(See AF&PA)
| AF&PA |
| American Forest & Paper Association |
| (800) 878-8878 |
| www.afandpa.org |
| (202) 463-2700 |
| AGA |
| American Gas Association |
| (202) 824-7000 |
www.aga.org
| AGC |
| Associated General Contractors of America (The) |
| (703) 548-3118 |
www.agc.org
| AHA |
| American Hardboard Association |
| (847) 934-8800 |
www.hardboard.org
| AHAM |
| Association of Home Appliance Manufacturers |
| (202) 872-5955 |
www.aham.org
| AI |
| Asphalt Institute |
| (859) 288-4960 |
www.asphaltinstitute.org
| AIA |
| American Institute of Architects (The) |
| (800) 242-3837 |
| www.aia.org |
| (202) 626-7300 |
| AISC |
| American Institute of Steel Construction |
| (800) 644-2400 |
| www.aisc.org |
| (312) 670-2400 |
| AISI |
| American Iron and Steel Institute |
| (202) 452-7100 |
www.steel.org
| AITC |
| American Institute of Timber Construction |
| (303) 792-9559 |
www.aitc-glulam.org
| ALCA |
| Associated Landscape Contractors of America |
| (800) 395-2522 |
| www.alca.org |
| (703) 736-9666 |
| ALSC |
| American Lumber Standard Committee |
| (301) 972-1700 |
| AMCA |
| Air Movement and Control Association International, Inc. |
| (847) 394-0150 |
www.amca.org
| ANLA |
| American Nursery & Landscape Association |
| (202) 789-2900 |
(Formerly: AAN - American Association of Nurserymen) www.anla.org
| ANSI |
| American National Standards Institute |
| (202) 293-8020 |
www.ansi.org
| AOSA |
| Association of Official Seed Analysts |
| (505) 522-1437 |
www.aosaseed.com
| APA |
| APA - The Engineered Wood Association |
| (253) 565-6600 |
www.apawood.org
| APA |
| Architectural Precast Association |
| (941) 454-6989 |
www.archprecast.org
| API |
| American Petroleum Institute |
| (202) 682-8000 |
www.api.org
| ARI |
| Air-Conditioning & Refrigeration Institute |
| (703) 524-8800 |
www.ari.org
| ASCA |
| Architectural Spray Coaters Association |
| (609) 848-6120 |
www.ascassoc.com
| ASCE |
| American Society of Civil Engineers |
| (800) 548-2723 |
| www.asce.org |
| (703) 295-6300 |
| ASHRAE |
| American Society of Heating, Refrigerating and |
| (800) 527-4723 |
Air-Conditioning Engineers
| www.ashrae.org |
| (404) 636-8400 |
| ASME |
| ASME International |
| (800) 843-2763 |
| (The American Society of Mechanical Engineers International) |
| (212) 591-7722 |
www.asme.org
| ASSE |
| American Society of Sanitary Engineering |
| (440) 835-3040 |
www.asse-plumbing.org
| ASTM |
| ASTM International |
| (610) 832-9585 |
(American Society for Testing and Materials International) www.astm.org
| AWCI |
| AWCI International |
| (703) 534-8300 |
(Association of the Wall and Ceiling Industries International) www.awci.org
| AWCMA |
| American Window Covering Manufacturers Association |
(See WCMA)
| AWI |
| Architectural Woodwork Institute |
| (800) 449-8811 |
| www.awinet.org |
| (703) 733-0600 |
| AWPA |
| American Wood-Preservers' Association |
| (817) 326-6300 |
www.awpa.com
| AWS |
| American Welding Society |
| (800) 443-9353 |
| www.aws.org |
| (305) 443-9353 |
| AWWA |
| American Water Works Association |
| (800) 926-7337 |
| www.awwa.org |
| (303) 794-7711 |
| BHMA |
| Builders Hardware Manufacturers Association |
| (212) 297-2122 |
www.buildershardware.com
| BIA |
| Brick Industry Association (The) |
| (703) 620-0010 |
www.bia.org
| BIFMA |
| BIFMA International |
| (616) 285-3963 |
(Business and Institutional Furniture Manufacturer's
Association International) www.bifma.com
| CCC |
| Carpet Cushion Council |
| (203) 637-1312 |
www.carpetcushion.org
| CCFSS |
| Center for Cold-Formed Steel Structures |
| (573) 341-4471 |
www.umr.edu/~ccfss
| CDA |
| Copper Development Association Inc. |
| (800) 232-3282 |
| www.copper.org |
| (212) 251-7200 |
| CEA |
| Canadian Electricity Association |
| (613) 230-9263 |
www.canelect.ca
| CFFA |
| Chemical Fabrics & Film Association, Inc. |
| (216) 241-7333 |
www.chemicalfabricsandfilm.com
| CGA |
| Compressed Gas Association |
| (703) 788-2700 |
www.cganet.com
| CGSB |
| Canadian General Standards Board |
| (819) 956-0425 |
www.pwgsc.gc.ca/cgsb
| CIMA |
| Cellulose Insulation Manufacturers Association |
| (888) 881-2462 |
| www.cellulose.org |
| (937) 222-2462 |
| CISCA |
| Ceilings & Interior Systems Construction Association |
| (630) 584-1919 |
www.cisca.org
| CISPI |
| Cast Iron Soil Pipe Institute |
| (423) 892-0137 |
www.cispi.org
| CLFMI |
| Chain Link Fence Manufacturers Institute |
| (301) 596-2583 |
www.chainlinkinfo.org
| CPPA |
| Corrugated Polyethylene Pipe Association |
| (800) 510-2772 |
| www.cppa-info.org |
| (202) 462-9607 |
| CRI |
| Carpet & Rug Institute (The) |
| (800) 882-8846 |
| www.carpet-rug.com |
| (706) 278-3176 |
| CRSI |
| Concrete Reinforcing Steel Institute |
| (847) 517-1200 |
www.crsi.org
| CSA |
| CSA International |
| (800) 463-6727 |
| (Formerly: IAS - International Approval Services) |
| (416) 747-4000 |
www.csa-international.org
| CSI |
| Construction Specifications Institute (The) |
| (800) 689-2900 |
| www.csinet.org |
| (703) 684-0300 |
| CSSB |
| Cedar Shake & Shingle Bureau |
| (604) 820-7700 |
www.cedarbureau.org
| CTI |
| Cooling Technology Institute |
| (281) 583-4087 |
(Formerly: Cooling Tower Institute) www.cti.org
| DHI |
| Door and Hardware Institute |
| (703) 222-2010 |
www.dhi.org
| EIA |
| Electronic Industries Alliance |
| (703) 907-7500 |
www.eia.org
| EIMA |
| EIFS Industry Members Association |
| (800) 294-3462 |
| www.eifsfacts.com |
| (770) 968-7945 |
| EJMA |
| Expansion Joint Manufacturers Association, Inc. |
| (914) 332-0040 |
www.ejma.org
| FCI |
| Fluid Controls Institute |
| (216) 241-7333 |
www.fluidcontrolsinstitute.org
| FGMA |
| Flat Glass Marketing Association |
(See GANA)
(See FMG)
| FMG |
| FM Global |
| (401) 275-3000 |
(Formerly: FM - Factory Mutual System) www.fmglobal.com
| FSC |
| Forest Stewardship Council |
| 52 951 5146905 |
www.fscoax.org
| GA |
| Gypsum Association |
| (202) 289-5440 |
www.gypsum.org
| GANA |
| Glass Association of North America |
| (785) 271-0208 |
(Formerly: FGMA - Flat Glass Marketing Association) www.glasswebsite.com/gana
| GRI |
| Geosynthetic Research Institute |
| (215) 895-2343 |
www.drexel.edu/gri
| GTA |
| Glass Tempering Division of Glass Association of |
North America
(See GANA)
| HI |
| Hydraulic Institute |
| (888) 786-7744 |
| www.pumps.org |
| (973) 267-9700 |
| HI |
| Hydronics Institute |
| (908) 464-8200 |
www.gamanet.org
| HMMA |
| Hollow Metal Manufacturers Association |
(See NAAMM)
| HPVA |
| Hardwood Plywood & Veneer Association |
| (703) 435-2900 |
www.hpva.org
| HPW |
| H. P. White Laboratory, Inc. |
| (410) 838-6550 |
www.hpwhite.com
| IAS |
| International Approval Services |
(See CSA)
| ICEA |
| Insulated Cable Engineers Association, Inc. |
| (770) 830-0369 |
www.icea.net
| ICRI |
| International Concrete Repair Institute, Inc. |
| (847) 827-0830 |
www.icri.org
| IEC |
| International Electrotechnical Commission |
| 41 22 919 02 11 |
www.iec.ch
| IEEE |
| Institute of Electrical and Electronics Engineers, Inc. (The) |
| (212) 419-7900 |
www.ieee.org
| IESNA |
| Illuminating Engineering Society of North America |
| (212) 248-5000 |
www.iesna.org
| IGCC |
| Insulating Glass Certification Council |
| (315) 646-2234 |
www.igcc.org
| IGMA |
| Insulating Glass Manufacturers Alliance (The) |
| (613) 233-1510 |
www.igmaonline.org
| ILI |
| Indiana Limestone Institute of America, Inc. |
| (812) 275-4426 |
www.iliai.com
| ISSFA |
| International Solid Surface Fabricators Association |
| (702) 567-8150 |
| I3A |
| International Imaging Industry Association |
| (914) 698-7603 |
(Formerly: PIMA - Photographic & Imaging Manufacturers Association) www.pima.net
| ITS |
| Intertek Testing Services |
| (800) 345-3851 |
| www.itsglobal.com |
| (607) 753-6711 |
| IWS |
| Insect Screening Weavers Association |
(Now defunct)
| KCMA |
| Kitchen Cabinet Manufacturers Association |
| (703) 264-1690 |
www.kcma.org
| LMA |
| Laminating Materials Association |
| (201) 664-2700 |
(Formerly: ALA - American Laminators Association) www.lma.org
| LPI |
| Lightning Protection Institute |
| (800) 488-6864 |
| www.lightning.org |
| (847) 577-7200 |
| LSGA |
| Laminated Safety Glass Association |
(See GANA)
| MBMA |
| Metal Building Manufacturers Association |
| (216) 241-7333 |
www.mbma.com
| MFMA |
| Maple Flooring Manufacturers Association |
| (847) 480-9138 |
www.maplefloor.org
| MFMA |
| Metal Framing Manufacturers Association |
| (312) 644-6610 |
www.metalframingmfg.org
| MHIA |
| Material Handling Industry of America |
| (800) 345-1815 |
| www.mhia.org |
| (704) 676-1190 |
| MIA |
| Marble Institute of America |
| (614) 228-6194 |
www.marble-institute.com
| ML/SFA |
| Metal Lath/Steel Framing Association |
(See SSMA)
| MPI |
| Master Painters Institute |
| (888) 674-8937 |
www.paintinfo.com
| MSS |
| Manufacturers Standardization Society of The Valve and |
| (703) 281-6613 |
Fittings Industry Inc.
www.mss-hq.com
| NAAMM |
| National Association of Architectural Metal Manufacturers |
| (312) 332-0405 |
www.naamm.org
| NAAMM |
| North American Association of Mirror Manufacturers |
(See GANA)
| NACE |
| NACE International |
| (281) 228-6200 |
(National Association of Corrosion Engineers International) www.nace.org
| NAIMA |
| North American Insulation Manufacturers Association |
| (703) 684-0084 |
(The) www.naima.org
| NAMI |
| National Accreditation and Management Institute, Inc. |
| (304) 258-5100 |
| NBGQA |
| National Building Granite Quarries Association, Inc. |
| (800) 557-2848 |
www.nbgqa.com
| NCMA |
| National Concrete Masonry Association |
| (703) 713-1900 |
www.ncma.org
| NCPI |
| National Clay Pipe Institute |
| (414) 248-9094 |
www.ncpi.org
| NCTA |
| National Cable & Telecommunications Association |
| (202) 775-3550 |
www.ncta.com
| NEBB |
| National Environmental Balancing Bureau |
| (301) 977-3698 |
www.nebb.org
| NECA |
| National Electrical Contractors Association |
| (301) 657-3110 |
www.necanet.org
| NeLMA |
| Northeastern Lumber Manufacturers' Association |
| (207) 829-6901 |
www.nelma.org
| NEMA |
| National Electrical Manufacturers Association |
| (703) 841-3200 |
www.nema.org
| NETA |
| InterNational Electrical Testing Association |
| (303) 697-8441 |
www.netaworld.org
| NFPA |
| National Fire Protection Association |
| (800) 344-3555 |
| www.nfpa.org |
| (617) 770-3000 |
| NFRC |
| National Fenestration Rating Council |
| (301) 589-6372 |
www.nfrc.org
| NGA |
| National Glass Association |
| (703) 442-4890 |
www.glass.org
| NHLA |
| National Hardwood Lumber Association |
| (800) 933-0318 |
| www.natlhardwood.org |
| (901) 377-1818 |
| NLGA |
| National Lumber Grades Authority |
| (604) 524-2393 |
www.nlga.org
| NOFMA |
| National Oak Flooring Manufacturers Association |
| (901) 526-5016 |
www.nofma.org
| NRCA |
| National Roofing Contractors Association |
| (800) 323-9545 |
| www.nrca.net |
| (847) 299-9070 |
| NRMCA |
| National Ready Mixed Concrete Association |
| (888) 846-7622 |
| www.nrmca.org |
| (301) 587-1400 |
| NSA |
| National Stone Association |
(See NSSGA)
| NSF |
| NSF International |
| (800) 673-6275 |
| (National Sanitation Foundation International) |
| (734) 769-8010 |
www.nsf.org
| NSSGA |
| National Stone, Sand & Gravel Association |
| (800) 342-1415 |
| (Formerly: NSA - National Stone Association) |
| (703) 525-8788 |
www.nssga.org
| NTMA |
| National Terrazzo and Mosaic Association, Inc. |
| (800) 323-9736 |
| www.ntma.com |
| (703) 779-1022 |
| NWWDA |
| National Wood Window and Door Association |
(See WDMA)
| PCI |
| Precast/Prestressed Concrete Institute |
| (312) 786-0300 |
www.pci.org
| PDCA |
| Painting and Decorating Contractors of America |
| (800) 332-7322 |
| www.pdca.com |
| (703) 359-0826 |
| PDI |
| Plumbing & Drainage Institute |
| (800) 589-8956 |
| www.pdionline.org |
| (508) 230-3516 |
| PGI |
| PVC Geomembrane Institute |
| (217) 333-3929 |
//pgi-tp.ce.uiuc.edu
| RCSC |
| Research Council on Structural Connections |
| (800) 644-2400 |
| www.boltcouncil.org |
| (312) 670-2400 |
| RFCI |
| Resilient Floor Covering Institute |
| Contact by mail only |
www.rfci.com
| RIS |
| Redwood Inspection Service |
| (888) 225-7339 |
| www.calredwood.org |
| (415) 382-0662 |
| SAE |
| SAE International |
| (724) 776-4841 |
www.sae.org
| SDI |
| Steel Deck Institute |
| (847) 462-1930 |
www.sdi.org
| SDI |
| Steel Door Institute |
| (440) 899-0010 |
www.steeldoor.org
| SEFA |
| Scientific Equipment and Furniture Association |
| (516) 294-5424 |
www.sefalabfurn.com
| SGCC |
| Safety Glazing Certification Council |
| (315) 646-2234 |
www.sgcc.org
| SIGMA |
| Sealed Insulating Glass Manufacturers Association |
(See IGMA)
| SJI |
| Steel Joist Institute |
| (843) 626-1995 |
www.steeljoist.org
| SMA |
| Screen Manufacturers Association |
| (561) 533-0991 |
www.screenmfgassociation.org
| SMACNA |
| Sheet Metal and Air Conditioning Contractors' |
| (703) 803-2980 |
National Association www.smacna.org
| SPFA |
| Spray Polyurethane Foam Alliance |
| (800) 523-6154 |
(Formerly: SPI/SPFD - The Society of the
Plastics Industry, Inc.; Spray Polyurethane Foam Division) www.sprayfoam.org
| SPIB |
| Southern Pine Inspection Bureau (The) |
| (850) 434-2611 |
www.spib.org
| SPI/SPFD |
| Society of the Plastics Industry (The) |
Spray Polyurethane Foam Division
(See SPFA)
(Single Ply Roofing Institute) www.spri.org
| SSINA |
| Specialty Steel Industry of North America |
| (800) 982-0355 |
| www.ssina.com |
| (202) 342-8630 |
| SSMA |
| Steel Stud Manufacturers Association |
| (312) 456-5590 |
(Formerly: ML/SFA - Metal Lath/Steel Framing Association) www.ssma.com
| SSPC |
| SSPC: The Society for Protective Coatings |
| (877) 281-7772 |
| www.sspc.org |
| (412) 281-2331 |
| STI |
| Steel Tank Institute |
| (847) 438-8265 |
www.steeltank.com
| SWI |
| Steel Window Institute |
| (216) 241-7333 |
www.steelwindows.com
| SWRI |
| Sealant, Waterproofing, and Restoration Institute |
| (816) 472-7974 |
www.swrionline.org
| TCA |
| Tile Council of America, Inc. |
| (864) 646-8453 |
www.tileusa.com
| TIA/EIA |
| Telecommunications Industry Association/Electronic |
| (703) 907-7700 |
Industries Alliance www.tiaonline.org
| TPI |
| Truss Plate Institute |
| (608) 833-5900 |
| TPI |
| Turfgrass Producers International |
| (800) 405-8873 |
| www.turfgrasssod.org |
| (847) 705-9898 |
| UL |
| Underwriters Laboratories Inc. |
| (800) 704-4050 |
| www.ul.com |
| (847) 272-8800 |
| UNI |
| Uni-Bell PVC Pipe Association |
| (972) 243-3902 |
www.uni-bell.org
| USITT |
| United States Institute for Theatre Technology, Inc. |
| (800) 938-7488 |
| www.culturenet.ca/usitt |
| (315) 463-6463 |
| WASTEC |
| Waste Equipment Technology Association |
| (800) 424-2869 |
| www.wastec.org |
| (202) 244-4700 |
| WCLIB |
| West Coast Lumber Inspection Bureau |
| (800) 283-1486 |
| www.wclib.org |
| (503) 639-0651 |
| WCMA |
| Window Covering Manufacturers Association |
(See WCSC)
| WCSC |
| Window Covering Safety Council |
| (800) 506-4636 |
| (Formerly: WCMA - Window Covering Manufacturers |
| (212) 661-4261 |
Association) www.windowcoverings.org
| WDMA |
| Window & Door Manufacturers Association |
| (800) 223-2301 |
| (Formerly: NWWDA - National Wood Window and |
| (847) 299-5200 |
Door Association) www.wdma.com
| WIC |
| Woodwork Institute of California |
| (916) 372-9943 |
www.wicnet.org
| WMMPA |
| Wood Moulding & Millwork Producers Association |
| (800) 550-7889 |
| www.wmmpa.com |
| (530) 661-9591 |
| WWPA |
| Western Wood Products Association |
| (503) 224-3930 |
www.wwpa.org
B. Code Agencies: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the following list. Names, telephone numbers, and Web-site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents.
PRIVATE tbl3
| BOCA |
| BOCA International, Inc. |
| (708) 799-2300 |
www.bocai.org
| CABO |
| Council of American Building Officials |
(See ICC)
| IAPMO |
| International Association of Plumbing and Mechanical |
| (909) 595-8449 |
Officials (The) www.iapmo.org
| ICBO |
| International Conference of Building Officials |
| (800) 284-4406 |
| www.icbo.org |
| (562) 699-0541 |
| ICC |
| International Code Council, Inc. |
| (703) 931-4533 |
(Formerly: CABO - Council of American Building Officials) www.intlcode.org
| SBCCI |
| Southern Building Code Congress International, Inc. |
| (205) 591-1853 |
www.sbcci.org
C. Federal Government Agencies: Where abbreviations and acronyms are used in Specifications or other Contract Documents, they shall mean the recognized name of the entities in the following list. Names, telephone numbers, and Web-site addresses are subject to change and are believed to be accurate and up-to-date as of the date of the Contract Documents.
PRIVATE tbl4@dom1
| CE |
| Army Corps of Engineers |
www.usace.army.mil
| CPSC |
| Consumer Product Safety Commission |
| (800) 638-2772 |
| www.cpsc.gov |
| (301) 504-0990 |
| DOC |
| Department of Commerce |
| (202) 482-2000 |
www.doc.gov
| EPA |
| Environmental Protection Agency |
| (202) 260-2090 |
www.epa.gov
| FAA |
| Federal Aviation Administration |
| (202) 366-4000 |
www.faa.gov
| FDA |
| Food and Drug Administration |
| (888) 463-6332 |
www.fda.gov
| GSA |
| General Services Administration |
| (202) 708-5082 |
www.gsa.gov
| HUD |
| Department of Housing and Urban Development |
| (202) 708-1112 |
www.hud.gov
| LBL |
| Lawrence Berkeley Laboratory |
(See LBNL)
| LBNL |
| Lawrence Berkeley National Laboratory |
| (510) 486-5605 |
www.lbl.gov
| NCHRP |
| National Cooperative Highway Research Program |
(See TRB)
| NIST |
| National Institute of Standards and Technology |
| (301) 975-6478 |
www.nist.gov
| OSHA |
| Occupational Safety & Health Administration |
| (800) 321-6742 |
| www.osha.gov |
| (202) 693-1999 |
| PBS |
| Public Building Service |
(See GSA)
| RUS |
| Rural Utilities Service |
| (202) 720-9540 |
(See USDA)
| TRB |
| Transportation Research Board |
| (202) 334-2934 |
www.nas.edu/trb
| USDA |
| Department of Agriculture |
| (202) 720-2791 |
www.usda.gov
| USPS |
| Postal Service |
| (202) 268-2000 |
www.usps.com
1.5 GOVERNING CODES, STANDARDS, AND DEPARTMENTAL PUBLICATIONS
A. The following codes, industry standards, DHHS manuals and handbooks are incorporated by reference:
1. Americans with Disabilities Act (ADA)
2. Uniform Federal Accessibility Standards (UFAS)
3. National Electric Code
4. National Earthquake Hazards Reduction Program (NEHRP) Provisions for the Development of Seismic Regulations for New Buildings.
5. International Building Code
6. NFPA, National Fire Codes
a. NFPA 101 Life Safety Code
b. NFPA 45, Laboratories Using Chemicals
c. Other Special Purpose code Publications as applicable
7. National Standard Plumbing Code
8. International Mechanical Code
9. Underwriters Laboratories (UL) Fire Resistance Directory
10. Underwriters Laboratories (UL) Building Materials Directory
11. NIH Generic Technical Criteria
12. NIH Design Policy and Guidelines
13. Biosafety in Microbiological and Biomedical Laboratories (CDC/NIH)
14. PHS Facilities Manual (Volume 1), chapters as follow: 4-1, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12.
B. Referenced items in effect on the date of this contract shall apply. Any items incorporated by reference shall be applicable to the extent that their provisions are not inconsistent with the Contract Documents.
C. Where conflicts occur between the different codes, industry standards, manuals, and handbooks; NFPA 101 shall be the overriding authority.
1.6 SUBMITTALS
A. Permits, licenses, and Certificates: for the Government’s record, submit copies of permits, licenses, certificates, inspection reports, releases, jurisdictional settlements, notices, receipts for fee payments, judgments, correspondence, record, and similar documents, established in conjunction with compliance with standards and regulations bearing upon performance of the Work.
PART 2 - PRODUCTS (Not Used)
PART 3 - EXECUTION (Not Used)
END OF SECTION 01420
FALL PROTECTION ( NIH-NIAID RML ( HAMILTON, MT
REFERENCES 01420 - 16
