CVN74_Turnover_Memo_Attachment_12.pdf

CVN74_Sample Turnover Memo_Attachment 12

Turnover Memo

To: Contractor

From: M. Anderson C271

CC: John Doe Date: 12/3/2013

Re: TURNOVER FOR SCD 12345

USS GEORGE H. W. BUSH (CVN 77) SCD 12345 FY15 PIA, CVN 77 Federation-

Install MCS and NCDS

MEMO:

a) CVN77-11872-01, MEMO (7/29/13)

b) CVN77-11872-02, MEMO (8/6/13)

c) CVN77-11872-03, MEMO (8/6/13)

d) CVN77-11872-04, MEMO (8/16/13)

e) CVN77-11872-05, MEMO (8/17/13)

f) CVN77-11872-06, MEMO (8/20/13)

g) CVN77-11872-07, MEMO (9/16/13)

h) CVN77-11872-08, MEMO (9/16/13)

i) CVN77-11872-09, MEMO (9/18/13)

j) CVN77-11872-10, MEMO (9/27/13)

k) CVN77-11872-11, MEMO (10/1/13)

l) CVN77-11872-12, MEMO (10/8/13)

m) CVN77-11872-13, MEMO (10/9/13)

n) CVN77-11872-14, MEMO (10/8/13)

o) CVN77-11872-15, MEMO (10/10/13)

p) SCD11872-271-016 , MEMO (10/9/13)

q) CVN77-11872-17, MEMO (10/11/13)

r) 271-SCD11872-18, MEMO (10/15/13)

NNSY CODE 271

s) 271-SCD11872-19, MEMO (10/17/13)

t) CVN77-11872-20, MEMO (10/22/13)

u) CVN77-11872-21, MEMO (10/24/13)

v) CVN77-11872-22, MEMO (10/24/13)

w) CVN77-11872-23, MEMO (10/24/13)

x) CVN77-11872-24, MEMO (10/25/13)

y) CVN77-11872-25, MEMO (10/31/13)

z) CVN77-11872-26, MEMO (10/31/13)

aa) CVN77-11872-27, MEMO (11/6/13)

bb) CVN77-11872-28, MEMO (11/6/13)

cc) CVN77-11872-29, MEMO (11/6/13)

NEW DRAWINGS REQ’D:

SEE ATTACHED SCOPE SHEET

NOTE: Drawings within the plan schedule that have (NSA) in the title is work to be done by NNSY personnel. The intent of these drawings is to split out the plant work from the AIT work.

Work concurrently with SCD 6613, 7567, 9780, 10216, 10810, 12622 & 12623.

Node Room No.1 (2-17-6-C)

See shipchecked ACAD drawing for Node Room No.1 removals

See shipcheck sketches for circuit 5PF1 modifications

See shipcheck sketch for circuit 3IV modifications

Node Room No.2 (03-30-6-C)

See shipchecked ACAD drawing for Node Room No.2 removals

Node Room No.3 (2-80-2-C)

See shipchecked ACAD drawing for Node Room No.3 removals

See ACAD drawing for Node Room No.3 MCS Rack installation See shipcheck sketches for circuit 5PF1 modifications

See shipcheck sketch for Node Room No.3 rack modifications. Racks will have to shift in order to accommodate new MCS Rack and to account for shock excursions.

See shipcheck sketch for Node Room No.3 arrangement modifications

Node Room No.4 (03-88-1-C)

See shipchecked ACAD drawing for Node Room No.4 removals

See shipcheck sketch for Node Room No.4 arrangement modifications

Node Room No.5 (03-108-6-C)

See shipchecked ACAD drawing for Node Room No.5 removals

See ACAD drawing for Node Room No.5 MCS Rack installation See shipcheck sketches for circuit 5PF1 modifications

See shipcheck sketch for Node Room No.5 arrangement modifications

Node Room No.6 (2-113-3-C)

See shipchecked ACAD drawing for Node Room No.6 removals

See ACAD drawing for Node Room No.6 MCS Rack installation

Continued on next page

See shipcheck sketch for Node Room No.6 arrangement modifications

See shipcheck sketch for Node Room No.6 MCS Rack installation circuit 1IM install (NSA) (cables to be run through the MMR to get to FWD IC)

FWD IC & Gyro Room & Node Room No.7 (4-113-0-C)

See shipchecked ACAD drawing for Node Room No.7 removals

See ACAD drawing for Node Room No.7 NCDS Rack installation See shipcheck sketches for circuit 5PF1 modifications

See shipcheck sketch for circuit 3IV modifications

See shipcheck sketch for Node Room No.7 arrangement modifications

See shipcheck sketch for Node Room No.7 circuit LN modification

See shipcheck sketch for Node Room No.7 circuit 1IM removal (NSA) (existing cables run through the MMR to get to Central Control)

Node Room No.8 (2-148-1-C)

See shipchecked ACAD drawing for Node Room No.8 removals

See ACAD drawing for Node Room No.8 MCS Rack installation See shipcheck sketches for circuit 5PF1 modifications

See shipcheck sketch for Node Room No.8 rack modifications. Racks will have to shift in order to accommodate new MCS Rack and to account for shock excursions.

See shipcheck sketch for Node Room No.8 arrangement modifications

See shipcheck sketch for Node Room No.8 MCS Rack installation circuit 1IM install (NSA) (cables to be run through the MMRs to get to Central Control and AFT IC)

Node Room No.9 (03-156-7-C)

Notes (Applicable to any/all dwgs):

Use memos, shipcheck and shipcheck sketches along with guidance drawings to produce SIDs.

The ACAD files included with the shipcheck package were for shipcheck purposes only. They are not intended for use as the base of the drawings to be produced.

Internal hookups for MCS and NCDS switches have yet to be determined. ISEA will provide a LAR to NNSY once hookup is complete.

For ckt 5PF1 & 3IV install drawings, draw internals of MCS racks to show placement of UPS units, batteries and/or 48VDC power supplies.

Standard mounting drawing is no longer used so all materials will have to be listed in the drawing.

When ferrules and/or lugs are required for hookup, provide in list of material.

When using tight mounting, provide the method applicable to the equipment being installed.

For HMIs currently installed on Reactor BHDs, write notes specifically to address keeping existing foundations in place and border the note within the body of the drawing to make it visible. C271 is working on talking with C2300 in getting their standard method of removing studs, clips, etc… from the Reactor BHD.

For installation of HMIs, IC/SMs and Prime Tech Receivers, install plates as detailed per shipcheck notes. Read any written shipcheck notes to prefab the plates and install them on existing foundations. Note: not all plates will be centered on existing foundations.

Make sure to clearly mark any Secondary Containment penetrations and add special notes to front sheet of drawing (where applicable).

Add RPPY NOTE to front sheet of drawing (where applicable)

Use latest version of GSO (2012 Edition)