406_A_Communication_Suite_Groom.docx

USNS WALLY SCHIRRA

(T-AKE 8)

COMMUNICATION SUITE GROOM

1.0 ABSTRACT:

1.1. Provide the services of a qualified Electronics Technician intimately familiar with the following systems to perform a visual inspection, system preventative maintenance (PM) tasks for systems listed below.

2.0 REFERENCES:

2.1. AN/USQ-155 Manufacturer’s Technical Manual

2.2. US Navy Preventative Maintenance System:

2.2.1. MIP 4416/510_2W-1/M.

2.2.2. MIP 4416/510_S-1

2.2.3. MIP 4411/019 MRCs R-1 and Q-1

3.0 ITEM LOCATION/DESCRIPTION:

3.1. Location: Transmitter Room 07-66-3/ TOPSIDE 08 DECK

3.2. Description:

3.2.1. AN/USC-61(v) DMR SATCOM and LOS Radios

3.2.2. RT-1799(P) Radio Receiver-Transmitter (3) EA

3.2.3. OE-570/WSC Antenna Group (SATCOM) (2) EA

3.2.4. AM-7585 100W RF POWER AMP (8) EA

3.2.5. AM-7584 200W RF POWER AMP (4) EA

3.2.6. OA-9277/SRC UHF LOS MULTICOUPLER (2) EA

3.2.7. AS-1735/SRC UHF ANTENNA GROUP (2) EA

3.2.8. AS-2809/SRC VHF ANTENNA (2) EA

3.2.9. CV-4376 Signal Data Converter (2) EA

3.2.10. HMI- ROC Computer (2) EA

3.3. Location: Naval Communications Center 07-62-1

3.4. Description:

3.4.1. AN/USQ-155 Tactical Variant Switch (TVS)

3.4.2. CorScan Computer (2)

3.4.3. CD-163(P) Interface Control Processor (ICP)

3.4.4. CV-4419(P) Red Analog Port Concentrator Unit

3.4.5. SA-2755(P) Black Tactical Switch Matrix Engine

3.4.6. CV-4417(P) Black D/A Port Concentrator Unit

3.4.7. SA-2777(P) Red Tactical Switch Matrix Engine

3.4.8. CV-4418(P) Red Digital Port Concentrator

3.4.9. AN/SYQ-26(V)2 SMS NAVMAC II

a. DISPLAY TERMINALS (2) EA

b. KBM SWITCH (2) EA

c. COMPUTER CPU (2) EA

d. VME NCC (2) EA

e. LASER PRINTER (2) EA

f. PERSONAL COMPUTER WORK STATION (1) EA

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES: None

5.0 NOTES:

5.1. The Contractor shall submit a security clearance list to the ship and MSC REP for working in the secure communications room. Contractor personnel shall have a minimum of “secret” security clearance for COMM Center access.

5.2. The contractor and all subcontractors regardless of tier shall consult the General Technical Requirements (GTR) to determine their effect on the work items in this work package, which may be effected by the requirements of this item.

5.3. This ship contains High Voltage (HV) electrical systems. The contractor and subcontractors shall obey all posted and verbal instructions regarding safety and exclusion from High Voltage areas. At no time shall a contractor or subcontractor approach, work on, or enter a High Voltage area without proper authorization.

5.4. The USNS WALLY SCHIRRA electrical color coding does not follow consistent color scheme. The ship is known to have current carrying conductor’s colored green, blue, black and white. The contractor shall assume all electrical cables are hot until tested otherwise. The contractor shall test all electrical cables to ensure they are dead prior to working on the item.

5.5. All shipboard lockout tag out procedures shall be followed by the contractor.

6.0 QUALITY ASSURANCE REQUIREMENTS: None Additional

7.0 STATEMENT OF WORK REQUIRED:

7.1. AN/USQ-155 Tactical Variant Switch (TVS)

7.1.1. Contractor shall perform a Maintenance Review Assessment (MRA), to include a visual inspection, preventative and corrective maintenance and a full system alignment of the installed AN/USQ-155 Tactical Variant Switch (TVS) system and associated equipment listed in paragraph 3.2 IAW reference 2.1.1, 2.1.2 and 2.1.3.

7.1.2. The contractor shall verify and document all software versions, patches, switch settings and jumpers in all equipment listed in 3.2, IAW references 2.1.1, 2.1.2 and 2.1.3. All documentation shall be submitted to the MSC P/E rep and ships SCO upon completion of this service order.

7.1.3. The contractor shall review HMI computer operations for proper file maintenance or anomalies and recommend corrective actions as necessary.

7.1.4. The contractor shall provide any training assistance as may be necessary if operational discrepancies are noted during the groom.

7.2. AN/SYQ-26 MAVMAC II

7.2.1. Contractor shall perform a Maintenance Review Assessment (MRA), to include a visual inspection, preventative and corrective maintenance and a full system alignment of the installed AN/SYQ-26 NAVMAC II system and associated equipment. Verify operability of VME 1 and 2. Verify system control processing controllers, CVT operability, and data input/output processor board.

7.2.2. The contractor shall verify the operability of the SPARE NAVMAC II console, and document all software versions, patches, switch settings and jumpers in all equipment. All documentation shall be submitted to the MSC P/E and ships SCO upon completion of this service order.

7.2.3. Demonstrate the satisfactory performance (copying) of the Fleet broadcast, CUDIXS circuit, full period termination and email & floppy distribution system.

7.2.4. Inspect the Azimuth wheels within the antenna for wear and proper operation.

7.3. AN/USC-61/SRC DMR

7.4. Inspection/Test:

7.4.1. The contractor shall provide daily briefings to the MSCREP and upon completion of work, submit a detailed written report of all work performed, work outstanding, and recommendations for follow up to ensure a fully functional communication system. The contractor shall complete a performance test on the entire system upon completion IAW with reference 2.1, and 2.2. The Contractor shall demonstrate proper operation of the entire system to the MSCREP and the Ships SCO upon completion of this service order.

7.5. Manufacturer’s Representative (MFR REP):

7.5.1. The contractor shall provide a qualified “Navy trained” Electronic technician or OEM factory trained REP to perform all tasks in this work item. Said representative shall have a minimum of 5 years hands on experience for all equipment listed under paragraph 3 above.

8.0 GENERAL REQUIREMENTS: None Additional.

406-5