Attachment 4 Wage Determination.pdf

States: Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, District of Columbia, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming

Area: Alaska Statewide Alabama Statewide Arkansas Statewide Arizona Statewide California Statewide Colorado Statewide Connecticut Statewide District of Columbia Statewide Delaware Statewide Florida Statewide Georgia Statewide Hawaii Statewide Iowa Statewide Idaho Statewide Illinois Statewide Indiana Statewide Kansas Statewide Kentucky Statewide Louisiana Statewide Massachusetts Statewide Maryland Statewide Maine Statewide Michigan Statewide Minnesota Statewide Missouri Statewide Mississippi Statewide Montana Statewide North Carolina Statewide North Dakota Statewide Nebraska Statewide New Hampshire Statewide New Jersey Statewide New Mexico Statewide Nevada Statewide New York Statewide Ohio Statewide Oklahoma Statewide Oregon Statewide Pennsylvania Statewide Rhode Island Statewide South Carolina Statewide South Dakota Statewide Tennessee Statewide

REGISTER OF WAGE DETERMINATIONS UNDER

THE SERVICE CONTRACT ACT

By direction of the Secretary of Labor

Diane C. Koplewski Director

Division of Wage Determinations

U.S. DEPARTMENT OF LABOR

EMPLOYMENT STANDARDS ADMINISTRATION

WAGE AND HOUR DIVISION

WASHINGTON, D.C. 20210

Wage Determination No.: 2011-0217

Revision No.: 4

Date of Last Revision: 06/13/2012

Page 1 of 6Wage Determination: 2011-0217, 4

6/19/2012https://cslxwep1.dol-esa.gov/SF98/getwd.jsp?wdid=48685 tcamossb Typewritten Text Attachment 4 Solicitation

HTC711-12-R-C002

tcamossb Typewritten Text tcamossb Typewritten Text tcamossb Typewritten Text tcamossb Typewritten Text

Texas Statewide Utah Statewide Virginia Statewide Vermont Statewide Washington Statewide Wisconsin Statewide West Virginia Statewide Wyoming Statewide

EAST NORTH CENTRAL: Illinois, Indiana, Michigan, Ohio and Wisconsin

EAST SOUTH CENTRAL: Alabama, Kentucky, Mississippi and Tennessee

MIDDLE ATLANTIC: Pennsylvania, New Jersey and New York

MOUNTAIN: Arizona, Colorado, Idaho, Montana, Nevada, New Mexico, Utah and Wyoming

NEW ENGLAND: Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island and Vermont

PACIFIC: Alaska, California, Hawaii, Oregon and Washington

SOUTH ATLANTIC: Delaware; District of Columbia, Florida, Georgia, Maryland, North Carolina, South Carolina, Virginia and West Virginia

WEST NORTH CENTRAL: Iowa, Kansas, Minnesota, Missouri, Nebraska, North Dakota and South Dakota

WEST SOUTH CENTRAL: Arkansas, Louisiana, Oklahoma and Texas

**Fringe Benefits Required Follow the Occupational Listing**

Employed on DOD contract for Trucking/Hauling and applicable port operations originating in the designated regions within the named locality .

OCCUPATION CODE - TITLE FOOTNOTE RATE

21020 - Forklift Operator

East North Central 14 .63

East South Central 13 .35

Middle Atlantic 15 .37

Mountain 14 .55

New England 15 .22

Pacific 16 .53

South Atlantic 14 .81

West North Central 14 .71

West South Central 13 .14

23440 - Heavy Equipment Operator

East North Central 24 .33

East South Central 15 .95

Page 2 of 6Wage Determination: 2011-0217, 4

6/19/2012https://cslxwep1.dol-esa.gov/SF98/getwd.jsp?wdid=48685

Middle Atlantic 24 .93

Mountain 20 .55

New England 22 .03

Pacific 28 .53

South Atlantic 17 .97

West North Central 19 .59

West South Central 15 .78

29010 - Blocker And Bracer

East North Central 22 .89

East South Central 16 .91

Middle Atlantic 23 .48

Mountain 23 .39

New England 22 .28

Pacific 31 .42

South Atlantic 21 .02

West North Central 20 .60

West South Central 18 .48

29020 - Hatch Tender

East South Central 16 .91

East North Central 22 .89

Middle Atlantic 23 .48

Mountain 23 .39

New England 22 .28

Pacific 31 .42

South Atlantic 21 .02

West North Central 20 .60

West South Central 18 .48

29030 - Line Handler

East North Central 22 .89

East South Central 16 .91

Middle Atlantic 23 .48

Mountain 23 .39

New England 22 .28

Pacific 31 .42

South Atlantic 21 .02

West North Central 20 .60

West South Central 18 .48

29041 - Stevedore I

Page 3 of 6Wage Determination: 2011-0217, 4

East North Central 21 .68

East South Central 17 .28

Middle Atlantic 22 .26

Mountain 21 .85

New England 21 .63

Pacific 29 .42

South Atlantic 19 .70

West North Central 19 .41

West South Central 17 .30

29042 - Stevedore II

East North Central 23 .99

East South Central 18 .25

Middle Atlantic 24 .82

Mountain 25 .01

New England 23 .42

Pacific 33 .44

South Atlantic 22 .31

West North Central 21 .71

West South Central 19 .70

31361 - Truckdriver, Light

East North Central 15 .63

East South Central 14 .38

Middle Atlantic 16 .30

Mountain 15 .81

New England 16 .13

Pacific 17 .82

South Atlantic 16 .04

West North Central 15 .79

West South Central 14 .26

31362 - Truckdriver, Medium

East North Central 16 .54

East South Central 15 .34

Middle Atlantic 17 .14

Mountain 17 .04

New England 16 .95

Pacific 19 .12

South Atlantic 17 .27

West North Central 16 .88

Page 4 of 6Wage Determination: 2011-0217, 4

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $3.71 per hour or $148.40 per week or $643.07 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility.

(Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form 1444

(SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming

West South Central 15 .37

31363 - Truckdriver, Heavy

East North Central 18 .43

East South Central 16 .91

Middle Atlantic 19 .71

Mountain 18 .91

New England 18 .93

Pacific 20 .43

South Atlantic 18 .76

West North Central 18 .25

West South Central 17 .44

31364 - Truckdriver, Tractor-Trailer

East North Central 18 .43

East South Central 16 .91

Middle Atlantic 19 .71

Mountain 18 .91

New England 18 .93

Pacific 20 .43

South Atlantic 18 .76

West North Central 18 .25

West South Central 17 .44

Page 5 of 6Wage Determination: 2011-0217, 4 process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees.

The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract.

{See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

Page 6 of 6Wage Determination: 2011-0217, 4