FSA26EQU24.0_FSA_Base_Specifications_1.pdf

FSA26-EQU24.0: Equipment Item Group Specifications

Item Groups Summary

All bid items shall be built to meet or exceed FSA Cooperative Purchasing Program base specifications and shall include all standard manufacturer equipment unless otherwise specified. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered.

• All Terrain & Utility Vehicles: All Terrain Vehicles (Quad)

• All Terrain & Utility Vehicles: Utility Vehicles (Side-by-Side)

• All Terrain & Utility Vehicles: Electric Utility Vehicles (Side-by-Side)

• Blower: Ride On Blower*

• Boat: Aquatic Weed Cutter Workboat

• Bulldozer: 70hp

• Bulldozer: 90hp

• Bulldozer: 180hp

• Chipper: Brush Chipper

• Compactor: 80,000 lbs. Landfill Compactor

• Compressor: Air Compressor - Trailer Mounted

• Dump Truck: Articulating Off Road Dump Truck - 50,000 lbs. Payload

• Excavator: All Terrain Walking Excavator

• Excavator: Hydraulic Excavator - 15,590 lbs. Operating Weight

• Excavator: Hydraulic Excavator - 38,000 lbs. Operating Weight

• Excavator: Hydraulic Excavator - 76,550 lbs. Operating Weight

• Excavator: Mini Hydraulic Excavator - 7,105 lbs. Operating Weight

• Excavator: Telescopic Excavator - 45,000 lbs. Operating Weight - Tracked Type

• Excavator: Telescopic Excavator - 47,000 lbs. Operating Weight - 6x6 Wheeled Type

• Excavator: Vacuum Excavator - Trailer Mounted

• Excavator: Vacuum Excavator Body, Truck Mounted - 12 cubic yd.*

• Excavator: Wheeled Hydraulic Excavator - 42,000 lbs. Operating Weight

• Forklift: Cushion Tire - 4,000 lbs. Capacity

• Forklift: Rough Terrain Forklift - 5,000 lbs. Capacity

• Forklift: Telescopic Tool Carrier/Telehandler

• Generator: 60kW Stationary

• Generator: 125kW Stationary

• Generator: 150kW Mobile

• Generator: 500kW Mobile

• Generator: 500kW Stationary

• Horizontal Directional Drill

• Leaf Collector: Trailer Mounted

• Lift: Articulated Boom Lift - Self Propelled Tracked*

• Lift: Scissor Lift - Self Propelled

• Light Tower: Hybrid Light Tower

• Light Tower: Light Tower - Trailer Mounted

• Loader: Loader Backhoe - 4x4

• Loader: Mini Skid Steer - 1,000 lbs. Operating Capacity - Tracked Type, Stand Up

Operator*

• Loader: Skid Steer - 1,850 lbs. Operating Capacity - Wheeled Type

• Loader: Skid Steer - 2,800 lbs. Operating Capacity - Wheeled Type

• Loader: Skid Steer - 3,100 lbs. Operating Capacity - Tracked Type

• Loader: Wheel Loader - 1.5 cubic yd.

• Loader: Wheel Loader - 3.0 cubic yd.

• Loader: Wheel Loader - 5.75 cubic yd.

• Low Speed Vehicle: Electric Type

• Motor Grader: Large

• Motor Grader: Small

• Mower: 15ft. Flex Wing Rotary Mower

• Mower: Remote Controlled Brush Mower

• Mower: Electric Zero Turn Radius Mower

• Mower: Zero Turn Radius Mower

• Pallet Jack: Electric 4,500 lbs. Capacity

• Pipe Inspection: Battery Operated Pipe Crawler Inspection System

• Pipe Inspection: External Power Pipe Crawler Inspection System*

• Portable Signal: Portable Signal - Trailer Mounted*

• Pump: Mobile Pump

• Roadway Advisory Board: Message Board/Automatic License Plate Reader*

• Roadway Advisory Board: Mobile Message Board

• Roadway Advisory Board: Mobile Speed Board

• Roadway Advisory Board: Mobile Speed Board/Automatic License Plate Reader

• Roadway Advisory Board: Mobile Traffic Advisory/Direction Signal Board

• Roller: Compact 2,900 lbs. - Double Drum Roller - 38in. Width*

• Roller: Compact, Pneumatic Asphalt Roller*

• Roller: Compaction Roller 15,000 lbs. - Single Drum

• Roller: Large 22,000 lbs. - Double Drum Roller - 70in. Width

• Roller: Small 5,400 lbs. - Double Drum Roller - 47in. Width

• Security Camera: Security Camera Tower - Trailer Mounted*

• Sewer Cleaner: Combination Sewer Cleaning/Vacuum Machine Body - 10 cubic yd.

• Sewer Cleaner: Easement Machine*

• Sewer Cleaner: Trailer Mounted Sewer Cleaner

• Shop Tools & Equipment

• Shredder: Mobile Shredder/Grinder

• Simulator System: Equipment Operator Simulator*

• Solid Waste Material Handler: Wheeled Type

• Stump Cutter

• Sweeper: 3-Wheel Mechanical or Regenerative Air Sweeper

• Sweeper: Mechanical Broom Street Sweeper

• Sweeper: Compact Air Sweeper - 2.3 cubic yd.

• Sweeper: Regenerative Air Street Sweeper

• Sweeper: Self-Propelled Hydrostatic Broom

• Sweeper: Tow Behind Beach Sweeper*

• Sweeper: Vacuum Street Sweeper*

• Sweeper: Walk Behind Floor Sweeper/Scrubber*

• Tactical Vehicle: Skid Steer Mounted (The Rook)

• Tool Carrier: Hydrostatic Drive

• Tractor: Agriculture Tractor - 4x2

• Tractor: Compact Articulating Tractor - AWD

• Tractor: Small Agriculture Tractor - 4x4

• Tractor: Tractor with Boom Mower - 4x4

• Trailer: Container Chassis Trailer - 73,900 lbs. GVWR*

• Trailer: Deck Over Flatbed Trailer - 14,000 lbs. GVWR

• Trailer: Deck Over Equipment Trailer - 40,000 lbs. GVWR

• Trailer: Detachable Neck Lowboy Trailer - 100,000 lbs. GVWR

• Trailer: Enclosed Cargo Trailer - 7,000 lbs. GVWR

• Trailer: Flatbed Tilt Trailer - 40,000 lbs. GVWR*

• Trailer: Fixed Neck Lowboy Trailer - 70,000 lbs. GVWR

• Trailer: Hydraulic Drop Deck Trailer - 13,500 lbs. GVWR

• Trailer: Hydraulic Tail Trailer - 70,000 lbs. GVWR

• Trailer: Leachate Tanker - 6,500 gallons

• Trailer: Livestock Trailer - 7,000 lbs. GVWR

• Trailer: Mobile Fuel Trailer - 460 gallons*

• Trailer: Multi Tank Fuel/Service 880 gallons Non-Hazmat - 14,000 lbs.

GVWR*

• Trailer: Pothole Patch Unit - 12,000 lbs. GVWR*

• Trailer: Pressure/Vacuum Trailer - 6,000 gallons*

• Trailer: Pull Behind Dump Trailer - 14,000 lbs. GVWR

• Trailer: Refrigeration/Freezer Trailer - 7,000 lbs. GVWR

• Trailer: Restroom Trailer ADA Compliant*

• Trailer: Sludge Trailer - 80,000 lbs. GVWR*

• Trailer: Utility/Equipment Trailer - 7,000 lbs. GVWR

• Trailer: Waste Trailer with Walking Floor

• Transfer Switch: 600 Amp Automatic Transfer Switch

• Trencher: Tractor Type*

• Trencher: Walk Behind Trencher

• Underground Locating Equipment: Ground Penetrating Radar

• Underground Locating Equipment: Utility Locator

• Vehicle Barrier: Road Closure Barrier System*

• Vehicle Lift: Above Ground Drive On Platform Lift, Pantograph Type*

• Vehicle Lift: In Ground Drive On Platform Lift, Scissor Type*

• Vehicle Lift: Mobile - 2 Column, Cabled

• Vehicle Lift: Mobile - 2 Column, Wireless

• Vehicle Lift: Mobile - 4 Column, Cabled

• Vehicle Lift: Mobile - 4 Column, Wireless

• Vehicle Lift: Mobile - 6 Column, Cabled

• Vehicle Lift: Mobile - 6 Column, Wireless

• Vehicle Lift: Mobile - 8 Column, Cabled

• Vehicle Lift: Mobile - 8 Column, Wireless

• Vehicle Lift: Above Ground - 2 Post Asymmetric Stationary Vehicle Lift 10k

• Vehicle Lift: Above Ground - 2 Post Symmetric Stationary Vehicle Lift 12k

• Vehicle Lift: Above Ground - 2 Post Symmetric Stationary Vehicle Lift 15k

• Vehicle Lift: Above Ground - 2 Post Symmetric Stationary Vehicle Lift 18k

• Vehicle Lift: Above Ground - 2 Post Versymmetric Stationary Vehicle Lift 10k

• Vehicle Lift: Above Ground - 4 Column, Alignment Lift with Front/Rear Jacks and

Integrated Turntables and Slip Plates 14k

• Vehicle Lift: Above Ground - 4 Post Alignment Lift with Turnplates and Rolling Jack 30k*

• Vehicle Lift: Above Ground - 4 Posts, Lift 14k*

• Vehicle Lift: Above Ground - 4 Posts, Lift 30k*

*New Item Group

All Terrain & Utility Vehicles: All Terrain Vehicles (Quad) The unit in this group must meet or exceed the following FSA Cooperative Purchasing Program specifications.

FSA Base Specifications

• Engine: Manufacturer’s gas or diesel engine, 30 hp

• Transmission: Manufacturer’s standard automatic transmission

• Chassis: 2- or 4-wheel drive

• Tires and Wheels: Front and rear all-terrain tires

• Weight: 580 lbs.

All Terrain & Utility Vehicles: Utility Vehicles (Side-by-Side) The unit in this group must meet or exceed the following FSA Cooperative Purchasing Program specifications.

FSA Base Specification

• Engine: Manufacturer’s gas or diesel engine, 20 hp

• Transmission: Manufacturer’s standard automatic transmission

• Drivetrain: 2- or 4-wheel drive

• Tires and Wheels: Front and rear all terrain tires

• Weight: 900 lbs.

• ROPS: ROPS protection

All Terrain & Utility Vehicles: Electric Utility Vehicles (Side-by-Side) specifications.

FSA Base Specification

• Dimensions (Approximate): Length- 113", height- 51", width- 56", wheelbase- 74", curb weight- 1,000 lbs., GVW- 2,900 lbs., 1,200 lbs. towing capacity

• Power: heavy duty batteries, 48-volt, charger included

• Transmission/Axle: Transaxle, 2-wheel drive

• Chassis/Steering/Suspension: frame type chassis, suspension matched for GVW of vehicle

• Tires And Wheels: Off/on road type tires, wheels rated for GVW of vehicle, tires to be traction type

• Performance: 40-mile range, 15 mph

• Brakes: Manual parking brake, disc or drum type, 2- or 4-wheel brakes

• Body: Rear mounted hitch for towing, pick-up type box with sides and tailgate, 2 passenger seating

• ROPS: ROPS protection

Blower: Ride On Blower specifications.

FSA Base Specification

• Engine: 35 hp gas engine, positive feed oil system

• Drive Train/Axles: Zero turn type, spin on hydraulic filters

• Blower: 6,000 cfm output ,23” diameter, steel, balanced, steel blower housing, electric clutch

• Blower Discharge: 180 degrees of nozzle rotation, 16 degrees vertical tilt

• Wheels: Front wheels- 13x5-6 ribbed, flat free, Rear wheels- 24x 12-12 turf

• Comfort & Convenience: Stand up operator type

Boat: Aquatic Weed Cutter Workboat specifications.

FSA Base Specification

• General Dimensions: Height- 8’, width- 7’3”, length- 15’, height from waterline- 48”, boat draft- 4” to 6”, weight- 2,285 lbs.

• Engine: 3-cylinder diesel engine, liquid cooled electric start, and charging system

• Hydraulics: Triple pump design, 27 GPM, eco-friendly hydraulic fluid

• Propulsion: Twin hydraulic outdrives, weed and mud design propellers

• Vessel Hull: Fiberglass/Kevlar design, deck mounted cutter and loader

• Boom Cutter: Hydraulic drive, full articulation to cut 5’ below waterline

• Front End Loader: Marine-type vegetation bucket

• Operator Station: All hydraulic function/propulsion function controls

• Trailer: Trailer to be designed specifically for this workboat. Must meet all federal, state, and local laws for a trailer operated on the highway.

Bulldozer: 70hp specifications.

FSA Base Specification

• Weight: Operating weight- 15,800 lbs.

• Engine: 70 hp diesel

• Transmission: Hydrostatic, variable speed

• Undercarriage: 5 rollers each side, 16” grouser width

• Dozer Blade: Width- 96”, height- 32”, PAT type blade, hydraulically controlled

• Operator Station: Enclosed ROPS cab, A/C and heat, suspension seat, work lights

Bulldozer: 90hp specifications.

FSA Base Specification

• Weight: Operating weight- 18,300 lbs.

• Engine: 90 hp diesel

• Transmission: Hydrostatic, variable speed

• Undercarriage: 6 rollers each side, 18” grouser width

• Dozer Blade: Width- 104”, height- 36”, PAT type blade, hydraulically controlled

Bulldozer: 180hp specifications.

FSA Base Specification

• Weight: Operating weight- 45,000 lbs.

• Engine: 180 hp diesel engine

• Transmission: Power shift (3 forward, 1 reverse minimum) or hydrostatic drive (variable)

• Undercarriage: 7 rollers each side, 24" grouser width

• Dozer Blade: Width- 128", height- 48”, PAT type blade, hydraulically controlled

Chipper: Brush Chipper specifications.

FSA Base Specification

• Weight: 6,800 lbs.

• Engine: 122 hp diesel engine

• Trailer: Surge or electric brakes, and trailer sized for GVW of machine, and DOT compliant

• Feed System: 15” chipping capacity, infeed throat opening- 20” x 15”, serrated infeed rollers, hydraulically driven, safety control bar around infeed opening for emergency stop

• Chipper Drum or Disc: Drum type- 22” diameter x 22” width, 2 knife pockets 180 degrees apart, dual edge reversible knives, extreme duty bearings, adjustable bedknife (reversible), disc type- 37” x 2” diameter disc, 4 knives reversible

• Chipper Housing: Easy access door for knife changes, drop down door for anvil adjustment or clean out

• Discharge Chute: Rotation of 270 degrees, adjustable chip deflector locking pin for chute rotation

• Miscellaneous: engine shutdown system, locking toolbox, vandalism protection

Compactor: 80,000 lbs. Landfill Compactor specifications.

FSA Base Specification

• Weight: Operating weight- 80,000 lbs.

• Engine: Turbocharged diesel engine 400 hp

• Transmission: Mechanical or hydrostatic drive will be acceptable, 2 speeds forward and 2 speeds reverse

• Operating Station: Enclosed sound suppressed cab, air filtration system, air conditioned, heater and defroster, gauges and engine monitoring shutdown system, adjustable suspension seat, outside mirrors, work lights, windshield wipers and washer

• Wheels: Compaction wheels- 48” width minimum, wheel diameter- 58”, chevron chopper blades, or weld-on/pin-on teeth type wheels acceptable, anti-wire wrapping device and cleaner bar if applicable

• Blade: Straight or U-type trash blade acceptable, 14’ blade width, 6’ blade height, full width trash screen on top of blade, bolt on cutting edges

• Miscellaneous: Fully shielded engine compartment, removable belly pan, landfill shielding package

Compressor: Air Compressor - Trailer Mounted specifications.

FSA Base Specification

• Weight: 1,950 lbs.

• Engine: 49 hp diesel engine, engine protection system

• Compressor: 185 cfm at 100 psi, rotary or reciprocating style compressor, 2 service valves

• Trailer: Sized for GVW of machine, DOT compliant

• Enclosure: Fixed weather enclosure over entire engine/compressor, 1 full size toolbox

Dump Truck: Articulating Off Road Dump Truck - 50,000 lbs. Payload specifications.

FSA Base Specification

• Weight: Operating weight 40,000 lbs.

• Engine: Turbocharged diesel engine 265 hp

• Transmission: 6 speeds forward, 1 speed reverse, hydraulic retarder

• Brakes: Disc type service brakes, disc type parking brake

• Axles & Differentials: Differential locks, inter axle differential lock

• Tires: Radial off road hauler tires, sized for GVW of machine

• Steering: 45-degree left or right articulation angle, secondary electric steering system for emergency steering

• Operating Station: Enclosed cab to be pressurized, heated, air conditioned and filtered, built in ROPS/FOPS protection, suspension type operators seat with seat belt, cab instrumentation or engine monitoring system with audible alarms, tinted glass windows, sun visor, front and rear intermittent windshield wipers, work lights, headlights, stop, tail and turn signal lights, left and right mirrors

• Body: Dump body tipping angle 70 degrees, mud flaps, two single stage double acting body hoist cylinders, 18 yd. heaped capacity

• Miscellaneous: 95-gallon fuel tank, guard or shielding package

Excavator: All Terrain Walking Excavator specifications.

FSA Base Specification

• Weight: 15,873 lbs. 2x4, 17,196 lbs. with 4x4 option

• Engine/Cab: 95 hp diesel engine, air conditioned and heated, enclosed ROPS cab equipped with manufacturer-provided emergency egress that remains functional regardless of boom position, gauges or warning indicators, mirrors, air suspension seat, full size cab, working lights

• Travel System: High-speed travel- 5 mph, grade-ability 70%, four tires

• Hydraulic System: Digging depth- 15’4”, auxiliary hydraulic circuit and controls plumbed to the end of stick with disconnect, stabilizers to be individually controlled in the vertical and horizontal positions

• Bucket: 4’ wide grading bucket, supplied with machine

Excavator: Hydraulic Excavator - 15,590 lbs. Operating Weight specifications.

FSA Base Specification

• Weight: Operating weight- 15,590 lbs.

• Engine: 53 hp diesel engine

• Undercarriage: Overall track length 9’ 1”, overall track width 7’ 5” shoe width 17”

• Operating Station: ROPS enclosed cab to be air conditioned, heated and pressurized filtration system, opening front windshield, adjustable suspension type seat with safety belt, tinted safety glass, engine monitoring system with audible alarms, work lights

• Stick, Boom, Bucket: Boom and stick combination to allow minimum reach at ground level of 20’ 11”, bucket to be general purpose bucket, appropriately sized for machine and included

Excavator: Hydraulic Excavator - 38,000 lbs. Operating Weight specifications.

FSA Base Specification

• Weight: Operating weight- 38,000 lbs.

• Engine: Turbocharged diesel engine 113 hp

• Undercarriage: Overall track length 12’ 10”, overall track width 6’ 6” shoe width 24”

• Operating Station: ROPS enclosed cab to be air conditioned, heated and pressurized filtration system, intermittent windshield wipers, opening front windshield, adjustable suspension type operator seat with safety belt, work lights

• Stick, Boom, Bucket: Boom and stick combination to allow minimum reach at ground level of 28’ 7”, bucket to be general purpose bucket, appropriately sized for machine and included

Excavator: Hydraulic Excavator - 76,550 lbs. Operating Weight specifications.

FSA Base Specification

• Weight: Operating weight- 76,550 lbs.

• Engine: Turbocharged diesel engine 257 hp,

• Undercarriage: Overall track length 16’ 2”, overall track width 10’ 6”, shoe width 24”

• Operating Station: ROPS enclosed cab to be air conditioned, heated and pressurized filtration system, intermittent windshield wipers, opening front windshield, adjustable suspension type operator seat with safety belt, tinted safety glass, engine monitoring system with audible alarm, work lights

• Stick, Boom, Bucket: Boom and stick combination to allow minimum reach at ground level of 35’ 6”, bucket to be a general-purpose bucket, appropriately sized for machine and included

Excavator: Mini Hydraulic Excavator - 7,105 lbs. Operating Weight specifications.

FSA Base Specification

• Weight: 7,105 lbs.

• Engine: Diesel engine, 23 hp

• Cab: ROPS open canopy, gauges or warning indicators for engine, work lights

• Tracks: 11” wide rubber belt tracks

• Stick, Boom, Bucket: Ground level reach of 15’ 8” minimum, auxiliary hydraulic circuit plumbed to the end of stick with disconnect, backfill blade, and general-purpose bucket sized appropriately for machine and included

Excavator: Telescopic Excavator - 45,000 lbs. Operating Weight - Tracked Type specifications.

FSA Base Specification

• Weight: Operating weight 45,000 lbs.

• Engine: Turbocharged diesel, 170 hp

• Track Drive: 2-speed automatic with manual override, motors each track, planetary drives, travel speed high 3.4 mph, low 1.9 mph, automatic parking brake, individual track control

• Tracks: 23” pad size

• Operator Station: Enclosed cab, acoustical lined, adjustable seat, tinted safety glass, filtered fresh air, heater, air conditioned, and defroster, wipers and washers, skylight, work lights

• Safety Items: Electric horn, movement alarm, fire extinguisher, mirrors

• Hydraulic System: Hydraulic oil cooler, electronic hydraulic system monitor, automatic swing brake

• Boom: Telescopic boom, 180-degree boom rotation, 30’ reach at ground level

• Bucket: 60” ditching bucket provided with machine, quick attach type

Excavator: Telescopic Excavator - 47,000 lbs. Operating Weight - 6x6 Wheeled Type specifications.

FSA Base Specification

• Weight: Operating weight 47,000 lbs.

• Carrier: Diesel engine, 250 hp, 6-speed automatic transmission, transfer case with front axle disconnect, one person carrier cab, air ride seat, heater, air conditioning, and defroster, windshield wipers, tinted glass, isolated and acoustic lined, gauges to monitor engine functions, frame sized for GVW and stress of mounted upper structure

• Safety: Electric horn, west coast mirrors with convex spot mirrors, tow hooks, fire extinguisher, backup alarm

• Front Axle: 16,000 lbs. front drive axle, leaf spring suspension, air brakes, automatic slack adjuster, integral power steering, hydraulic axle lockouts, 425/65R22.5 on/off road tires

• Rear Axle: Tandem axles 40,000 lbs., Hendrickson rear suspension, air brakes, automatic slack adjusters, 11R24.5 traction type tires

• Upper Structure: Hydraulic system- 80 hp drive motor, 44 hp swing motor, automatic swing park brake, hydraulic remote control- travel and steering controls in upper structure cab, automatic brakes and axle lockouts, movement alarm, upper structure cab- isolated and acoustic lined, tinted safety glass, adjustable operators seat, heater, air conditioning, and defroster, work lights, wipers and washers, mirrors on left and right, skylight upper structure control- electronic joysticks on adjustable pedestals, engine monitoring lights or gauge with audible warning or automatic shutdown low/high travel switch, electric horn, engine speed control.

• Boom, Stick, Bucket: Quick attach type, 60” ditching bucket provided with machine, telescopic type boom, 180-degree boom rotation, 30’ reach at ground level

Excavator: Vacuum Excavator - Trailer Mounted specifications.

FSA Base Specification

• Weight: 14,000 lbs. GVWR

• Engine: 36 hp diesel engine, fully enclosed sound attenuated engine enclosure (including vacuum pump and high-pressure water pump)

• Vacuum Pump: 580 cfm at 15” of mercury, washable filtration cylinders, reverse pressure

(to clear hose and offload liquids)

• High Pressure Water System: Minimum 2,000 psi at 4+ GPM water pump, low water automatic shutdown, two 100-gallon poly water tanks, 50’ high pressure water hose on hose reel, 5’ and 3’ wand and control handle

• Controls: Lockable and waterproof, curbside located, oil pressure, water temperature, fuel and vacuum gauge, electronic throttle

• Tank: Full open rear door, hydraulically opened, twin dump cylinders, 6” stainless steel portal shutoff, 800-gallon debris tank capacity

• Boom: 4” pickup hose, hydraulically powered in/out and up/down, boom cradle, 360-degree movement, 2 dielectric 3” suction wands, 33’ rubber suction hose

• Trailer: Sized for GVW of machine and DOT compliant

Excavator: Vacuum Excavator Body, Truck Mounted - 12 cubic yd.

The unit in this group must meet or exceed the following FSA Cooperative Purchasing Program specifications.

Note: Incomplete unit. This is a specification for a vacuum excavator unit to be mounted on an appropriately sized cab / chassis truck, provided by the purchaser. Agencies purchasing this unit will provide a cab / chassis truck of appropriate size, GVWR, and options necessary to have the selected vacuum unit mounted on. It is recommended the vendor of the vacuum unit and cab/chassis manufacturer be contacted to assist with determining performance and compatibility needs prior to purchase.

FSA Base Specification

• Air/Vacuum System: Positive displacement vacuum pump or centrifugal compressor, 3600 CFM @18 hg, muffler, vacuum relief valves, centrifugal separator with clean out

• Debris Tank: 12 cubic yd. capacity, 45-degree hydraulic dump, top hinged, hydraulic door locks, sight glass or indicator, drain valve with hose, check ball system or vacuum breaker

• Boom Assembly: 180-degree boom working area, hydraulic up/down, clean out port, transport cradle, 8” boom hose, boom control

• Water Pump: 2,200 psi, 10 gpm, pressure relief valve, wash down gun with relief valve, hose reel

• Water Tank: 1,000-gal capacity, curb side fill, level indicators

• Drive System: Hydrostatic, PTO, or transfer case type

• Miscellaneous: Work lights, warning lights

Excavator: Wheeled Hydraulic Excavator - 42,000 lbs. Operating Weight specifications.

FSA Base Specification

• Weight: Operating weight- 42,000 lbs.

• Engine: Turbocharged diesel engine 140 hp

• Travel System: Travel speed of 21 mph

• Carrier: Traction type tires sized for GVW of machine

• Operating Station: Enclosed cab to be air conditioned, heated, and pressurized filtration system, intermittent windshield wipers, opening front windshield, vibration dampening cab mounts, adjustable suspension type operator seat with safety belt, tinted safety glass, engine monitoring system with audible alarms, work lights, stop/tail/turn and emergency flashers

• Stick, Boom, Bucket: Boom and stick combination to allow reach at ground level of 30’, front blade, digging bucket to be a general-purpose bucket, appropriately sized for machine and included

• Outriggers: Rear outriggers

Forklift: Cushion Tire - 4,000 lbs. Lift Capacity The unit in this group must meet or exceed the following FSA Cooperative Purchasing Program specifications.

FSA Base Specification

• Weight: 6,900 lbs.

• Lift Height: 130”

• Lift Capacity: 4,000 lbs.

• Engine: 50 hp, LP gas engine

• Transmission: Powershift type, inching pedal, 1 speed forward, 1 speed reverse

• Chassis: Wheelbase- 46", tread width- 33" (with standard tires), ground clearance at lowest point- 3"

• Tire size: Front- 18.0 x 7 x 12 cushion tire, rear- 14.0 x 5 x 10 cushion tire, steering radius-

72"

• Brakes: Hydraulic service brakes, mechanical parking brake

• Lift: Two stage lift mast, adjustable fork spacing, forward/backward tilt

• Operator Station: FOPS/ROPS protection, open canopy, work lights, seat belts, ANSI compliant

Forklift: Rough Terrain Forklift - 5,000 lbs. Lift Capacity specifications.

FSA Base Specification

• Weight: 12,800 lbs.

• Lift Height: 14’

• Lift Capacity: 5,000 lbs.

• Engine: 70 hp diesel

• Transmission: FWD/rev shuttle shift, 4WD

• Chassis: Front track width 80”, turning radius 13’

• Tires: Front 16.9-24, rear 12-16.5 lug type tires

• Lift: 3 stage, side shift, adjustable fork spacing, FWD/backward tilt, load cushioning

• Operator Station: FOP/ROP protection, open canopy, work lights, seat belt, ANSI compliant

Forklift: Telescopic Tool Carrier/Telehandler specifications.

FSA Base Specifications

• Weight: 17,155 lbs.

• Lift Height: 42’

• Lift Capacity: 7,700 lbs.

• Forward Reach: 26’

• Engine: 100 hp, diesel turbocharged

• Transmission: Hydrostatic drive, 2 travel speeds, low speed 3 mph, high speed 18 mph, AWD

• Chassis: 15.5 x 25 traction type tires, foam filled, 12’ turning radius, 3 steering modes- all wheel, crab, and front wheel

• Operator Station: ROPS/FOPS enclosed cab with air conditioning and heat, suspension seat, seat belt, work lights, safety lights, warning beacon, engine instrumentation or monitoring system

Generator: 60kW Stationary specifications.

FSA Base Specification

• Generator Requirements: Standby rated 60 kW, 75 kVA, 0.8 power factor, 480V, 3-phase, 60 Hz, 1,800 RPM. Generator shall be directly coupled to the engine and meet IEC G3 performance requirements and UL 2200 certification.

• Engine: Water-cooled diesel engine sized for generator output and compliant with applicable emissions requirements.

• Controls: Microprocessor-based control system providing generator operating, monitoring, protection, and control functions.

• Enclosure/Silencer: Factory-assembled weather-protective, sound-attenuated enclosure including control panel, starting batteries, critical grade silencer, companion flanges, and flexible stainless-steel exhaust connection, sound attenuated enclosures noise level not to exceed 75 dBA measured at 23 ft.

• Fuel Tank: Integral double-wall sub-base fuel tank meeting UL 142 and applicable FDEP requirements with minimum 24-hour runtime at full rated load, 110% secondary containment, mechanical fuel gauge, lockable fuel fill, low fuel level alarm, and fuel tank rupture alarm.

• Battery Charger: Integral automatic battery charger with boost and float charging modes.

• Startup & Commissioning: Vendor shall coordinate startup and commissioning activities following installation by others. A factory-trained technician shall perform one (1) day of startup and operational testing and provide operator training.

• Warranty & Documentation: Generator shall include all standard manufacturer equipment and accessories. Initial fill of oil and coolant shall be included (fuel provided by others). One complete set of operation and maintenance manuals shall be provided.

Warranty minimum two (2) years or 1,500 hours.

Generator: 125kW Stationary specifications.

FSA Base Specification

• Generator Requirements: Standby rated 125 kW, 156.3 kVA, 0.8 power factor, 480V, 3-phase, 60 Hz, 1,800 RPM. Generator shall be directly coupled to the engine and meet IEC G3 performance requirements and UL 2200 certification.

• Engine: Water-cooled diesel engine sized for generator output and compliant with applicable emissions requirements.

• Controls: Microprocessor-based control system providing generator operating, monitoring, protection, and control functions.

• Enclosure/Silencer: Factory-assembled weather-protective, sound-attenuated enclosure including control panel, starting batteries, critical grade silencer, companion flanges, and flexible stainless-steel exhaust connection, sound attenuated enclosures noise level not to exceed 75 dBA measured at 23 ft.

• Fuel Tank: Integral double-wall sub-base fuel tank meeting UL 142 and applicable FDEP requirements with minimum 24-hour runtime at full rated load, 110% secondary containment, mechanical fuel gauge, lockable fuel fill, low fuel level alarm, and fuel tank rupture alarm.

• Battery Charger: Integral automatic battery charger with boost and float charging modes.

• Startup & Commissioning: Vendor shall coordinate startup and commissioning activities following installation by others. A factory-trained technician shall perform one (1) day of startup and operational testing and provide operator training.

• Warranty & Documentation: Generator shall include all standard manufacturer equipment and accessories. Initial fill of oil and coolant shall be included (fuel provided by others). One complete set of operation and maintenance manuals shall be provided.

Warranty minimum two (2) years or 1,500 hours.

Generator: 150kW Mobile specifications.

FSA Base Specification

• Generator Requirements: Standby rated 150 kWe, 187 kVA, 0.8 power factor; prime rated 135 kWe, 168 kVA, 0.8 power factor. Generator shall be directly coupled to the engine and equipped with a shunt-trip main breaker, jacket water heater, and IEC G3 compliance.

• Engine: Emission-compliant diesel engine sized for generator output.

• Controls: Microprocessor-based control system providing operating, monitoring, protection, and automatic start/stop functions.

• Distribution & Receptacles: Voltage selection for 120/240V single-phase, 120/240V three-phase, 120/208V three-phase, and 277/480V three-phase. Unit shall include load connection points, 50A twist-lock receptacle, 30A RV receptacle, duplex receptacles, GFCI receptacles, and remote start connections.

• Enclosure: Factory weather-protective sound-attenuated enclosure with lockable doors, critical-grade silencer, flexible exhaust connection, and service drain connections, sound attenuated enclosures noise not to exceed 75 dBA measured at 23 ft.

• Trailer/Fuel Tank: DOT-compliant trailer sized for generator package. Fuel system shall provide minimum eight (8) hour runtime at 75% load with fuel gauge, locking fuel fill, low fuel alarm, and required vents and connections.

• Battery Charger: Integral automatic battery charger with boost and float charging modes.

• Startup & Commissioning: Factory-trained technician shall perform one (1) day of startup, testing, and operator training.

• Warranty & Documentation: All equipment shall be new and current production.

Operation and maintenance manuals included. Warranty minimum two (2) years or 1,500 hours.

Generator: 500kW Mobile specifications.

FSA Base Specification

• Generator Requirements: Standby rated 500 kWe, 625 kVA, 0.8 power factor; prime rated 450 kWe, 563 kVA, 0.8 power factor. Generator shall be directly coupled to the engine and equipped with shunt-trip breaker, jacket water heater with isolation valves, and IEC G3 compliance.

• Engine: Water-cooled emission-compliant diesel engine sized for generator output.

• Controls: Microprocessor-based control system providing operating, monitoring, protection, and automatic start/stop functions.

• Distribution & Receptacles: Voltage selection for 120/208V and 277/480V three-phase operation. Load connection points rated for 2,000 amps with remote start provisions and dedicated charger/heater receptacles.

• Enclosure: Factory weather-protective sound-attenuated enclosure with lockable doors, critical-grade silencer or equivalent attenuation, flexible exhaust connection, and service drain connections, sound attenuated enclosures noise levels not to exceed 80 dBA measured at 23 ft.

• Trailer/Fuel Tank: DOT-compliant trailer with VIN, leveling jacks, hydraulic brakes, and adjustable/removable pintle hitch. Fuel system shall provide minimum eight (8) hour runtime at 75% load.

• Battery Charger: Integral automatic battery charger with boost and float charging modes.

• Startup & Commissioning: Factory-trained technician shall perform one (1) day of startup, testing, and operator training.

• Warranty & Documentation: All equipment shall be new and current production.

Operation and maintenance manuals included. Warranty minimum two (2) years or 1,000 hours.

Generator: 500kW Stationary specifications.

FSA Base Specification

• Generator Requirements: Standby rated 500 kW, 625 kVA, 0.8 power factor. Available in 120/240V, 120/208V, or 277/480V three-phase configurations. Generator shall meet IEC G3 performance requirements and UL 2200 certification.

• Engine: Water-cooled, 1,800 RPM diesel engine compliant with applicable stationary standby emissions requirements.

• Controls: Microprocessor-based control system providing generator operating, monitoring, protection, and control functions. Control panel shall comply with NFPA 110.

• Enclosure/Silencer: Factory-assembled weather-protective, sound-attenuated enclosure constructed of corrosion-resistant materials with critical-grade silencer, flexible exhaust connection, and service drain connections, sound attenuated enclosures noise level not to exceed 80 dBA measured at 23 ft.

• Fuel Tank: Integral double-wall sub-base fuel tank meeting UL 142 and applicable FDEP requirements with minimum 24-hour runtime at 75% load, 110% secondary containment, mechanical fuel gauge, lockable fuel fill, low fuel level alarm, and rupture alarm.

• Battery Charger: Integral automatic battery charger with boost and float charging modes.

• Startup & Commissioning: Vendor shall coordinate startup and commissioning activities following installation by others. A factory-trained technician shall perform one (1) day of startup and operational testing and provide operator training.

• Warranty & Documentation: Generator shall include all standard manufacturer equipment and accessories. Initial fill of oil and coolant shall be included. One complete set of operation and maintenance manuals shall be provided. Warranty minimum two

(2) years or 1,500 hours.

Horizontal Directional Drill specifications.

FSA Base Specification

• Weight: 20,700 lbs.

• Engine: 125 hp, liquid cooled diesel

• Operational: Thrust/pullback 28,000 lbs., carriage speed 240 fpm, spindle torque 4,200 lbs., rotational speed 270 rpm, bore diameter 4”, ground speed 3 mph, drill rack angle 14-21 degrees

• Controls: Touchscreen guidance display

• Drill System: Hydraulic vise, stakedown system, strike alert, remote lockout, work lights

• Drill Pipe: Rod diameter- 2.38”, length- 10’, weight- 73 lbs., bend radius- 108’

• Color: Manufacturers’ standard color

• Fluid System: Mixing type

Leaf Collector: Trailer Mounted specifications.

FSA Base Specification

• Motor: 74 hp diesel engine, liquid cooled

• Fan: 27” fan, direct drive

• Pickup Hose: 16” diameter, 3 function hydraulically controlled arm, safety interlock

• Collection Body: 30 cubic yd. capacity w/ tailgate, scissor hoist, hydraulic dump

• Ride On Operator Station: All machine controls to be located at operator station, seat belt, emergency shutdown

• Dust Control: Dust control system, water pump, 3 nozzles, 90-gallon water tank

• Trailer: Frame, axles, tires, electric brakes will be sized for GVW of unit, DOT compliant, pintle hitch, yellow flashers, tongue jack

• Color: Manufacturers’ standard color

Lift: Articulated Boom Lift - Self Propelled Tracked specifications.

FSA Base Specification

• Performance Standards: 55’ working height, 23’ horizontal reach, lift capacity 440 lbs.

• Boom: Telescoping upper boom, articulating jib, rotating basket, 360-degree boom rotation

• Outriggers: 4 corner hydraulic outriggers, w/ground pressure sensors

• Power: Gas or diesel engine, and 120v electric power for indoor operation

• Tracks: Rubber tracks

• Platform: Aluminum basket, hydraulic leveling system, w/load cell, controls

Lift: Scissor Lift - Self Propelled specifications.

FSA Base Specification

• Performance Standards: 25’ working height (raised), 18’ platform height (raised), lift capacity 500 lbs.

• Power: 24-volt, 4–6-volt batteries, on board charging system, dual front wheel drive

• Brakes: 2- or 4-wheel brakes

• Platform: 64" x 29" platform, 36" extension deck fixed rails, AC power to platform, lanyard attachment points

• Safety: Manual platform lowering, emergency stop on platform and ground control, descent alarm, hour meter, horn, pothole guards, on board diagnostic system, tilt lever sensor with alarm, scissor maintenance prop

Light Tower: Hybrid Light Tower specifications.

FSA Base Specification

• Performance Standards: deployed height- 30’, weight- 1,850 lbs.

• Generator: Diesel engine, water cooled, emission compliant, 2 20A/120v receptacles, auto mode- automatic start for low battery hybrid systems automatically switches between solar battery, generator, or standard household current

• Trailer: 2 extendable outriggers, top mounted fork pockets and single lifting eye, powder coated DOT compliant trailer with lights

• Mast: 30’ extendable mast in 3 stages, wind stability to 40 mph, rotates 90 degrees

• Lights: 4 quick connect 320 watt each, LED lights, dimmer control, instant on/off, 365-day programmable timer for lights, on/off, lens pattern spread of 150 degrees, meets DOT anti-glare regulations

• Solar Panels: 5 100-watt panels, operating temperature- 40°C to 46°C

• Batteries: 4 deep cycle batteries, optional lithium cells, 12-volt, 220 amp hours

Light Tower: Light Tower - Trailer Mounted specifications.

FSA Base Specification

• Performance Standards: Mast deployed height- 23’, weight- 1,610 lbs.

• Engine: Diesel engine, engine protection shutdown system

• Generator: Wattage output 7,000-watt max, 6,000-watt continuous, brushless type, 120/240v at 60 Hz, 6% regulated, amps at 120/240v 50/25, insulation class

• Fuel Tank: Sized for run time of 64 hrs.

• Trailer: 4 outrigger jacks, ball type hitch, DOT compliant

• Control Panel: Individual breakers for lights, hour meter, cabinet lights, external receptacles- One 30-amp 120/240-volt, twist lock, 1 GFC1, 15-amp 120 volt

• Mast: 30’ extendable mast, 4 LED light heads, 320,000 lumens, 360-degree mast rotation, fold down for transport, winch for mast extension

Loader: Loader Backhoe - 4x4 specifications.

FSA Base Specification

• Weight: 15,221 lbs.

• Engine: 87 hp diesel engine

• Transmission: 4-speed power shift or power shuttle transmission

• Drivetrain: 4-wheel drive, with differential lock

• Operator Environment: ROPS enclosed cab, A/C and heat, work and driving lights, Stop and turn signals with flashing hazard lamps gauges or an electronic monitoring device standard horn and audible back-up alarm

• Brakes: enclosed and sealed, fully self-adjusting

• Tires: Lug type tires

• Loader (Single Tilt Cylinder): Loader shall be equipped with a return to dig mechanism, loader bucket 1.3 yd. with replaceable bolt on edge, furnished with machine

• Backhoe: Fixed length dipper stick reach approximately 17’ from swing center at ground level 24” general purpose bucket with replaceable teeth, furnished with machine

Loader: Mini Skid Steer - 1,000 lbs. Operating Capacity - Tracked Type, Stand Up Operator specifications.

FSA Base Specification

• Engine: Minimum 24 hp diesel

• Transmission: Hydrostatic drive

• Operator Environment: Stand up type, engine monitoring system or gaugesBrakes:

Hydrostatic main braking

• Tracks: Rubber tracks

• Loader: Front auxiliary hydraulics, 36” wide general purpose construction bucket

(supplied with machine)

• Operating Capacity 1,000 lbs.

Loader: Skid Steer - 1,850 lbs. Operating Capacity - Wheeled Type specifications.

FSA Base Specification

• Engine: 56 hp diesel

• Transmission: Hydrostatic drive

• Operator Environment: ROPS canopy shall be integral, front and rear work lights, hazard lights, engine monitoring system or gauges, with audible alarm, horn and backup alarm

• Brakes: Parking brake, hydrostatic main braking

• Tires: Lug type tires

• Loader: Front auxiliary hydraulics, foot or hand controls for bucket, 62” wide construction bucket, supplied with machine

• Operating Capacity: 1,850 lbs.

Loader: Skid Steer - 2,800 lbs. Operating Capacity - Wheeled Type specifications.

FSA Base Specification

• Engine: 83 hp diesel

• Transmission: Hydrostatic drive

• Operator Environment: ROPS canopy shall be integral, front and rear work lights, hazard lights, engine monitoring system or gauges, with audible alarm, horn and backup alarm,

• Brakes: Parking brake, hydrostatic braking

• Tires: Lug type tires

• Loader: Front auxiliary hydraulics, foot or hand controls for bucket, 84” wide construction bucket supplied with machine

• Operating Capacity: 2,800 lbs.

Loader: Skid Steer - 3,100 lbs. Operating Capacity - Tracked Type specifications.

FSA Base Specification

• Engine: 74 hp diesel,

• Transmission: Hydrostatic drive

• Operator Environment: ROPS canopy shall be integral, front and rear work lights, hazard lights, engine monitoring system or gauges, with audible alarm, horn and backup alarm

• Brakes: Parking brake, hydrostatic braking

• Tracks: Rubber tracks

• Bucket: 75” construction bucket, supplied with machine

• Operating Capacity: 3,100 lbs.

Loader: Wheel Loader - 1.5 cubic yd.

specifications.

FSA Base Specification

• Operating Weight: 14,100 lbs.

• Engine: minimum 74 hp, diesel engine

• Operator Station: Enclosed ROP cab with air conditioning and heat, suspension seat, work lights, driving lights, tinted glass, sound suppressed, mirrors

• Transmission: Power shift transmission or hydrostatic drive, minimum of 4 forward and 3 reverse speeds

• Drivetrain: AWD

• Tires: 15.5-25 radial, lug type tires

• Loader: 1.5 cubic yd. general purpose bucket with bolt on cutting edge supplied with machine, bucket position indicator, automatic return to dig

Loader: Wheel Loader - 3.0 cubic yd.

specifications.

FSA Base Specification

• Operating Weight: 27,200 lbs.

• Engine: Diesel engine, 140 hp

• Operators Station: ROPS enclosed cab with air conditioning and heat, suspension seat, work lights, driving lights, tinted glass, sound suppressed, mirrors

• Transmission: Power shift transmission or hydrostatic drive, minimum of 4 forward and 3 reverse speeds

• Drivetrain: AWD

• Tires: 20.5-25 radial tires, lug type

• Loader: 3.0 cubic yd. general purpose bucket with bolt on cutting edge furnished with

Loader: Wheel Loader - 5.75 cubic yd.

specifications.

FSA Base Specification

• Operating Weight: 53,674 lbs.

• Engine: Diesel engine, 280 hp

• Operators Station: ROPS enclosed cab with air conditioning and heat, suspension seat, work lights, driving lights, tinted glass, sound suppressed, mirrors

• Transmission: Power shift transmission or hydrostatic drive, 4 forward and 3 reverse speeds

• Drivetrain: AWD

• Tires: 26.5-R25 radial tires, lug type

• Loader: 5.75 cubic yd. general purpose bucket with bolt on cutting edge furnished with

Low Speed Vehicle: Electric Type specifications.

FSA Base Specification

• Classification: These vehicles are primarily used to transport people and limited cargo in the State of Florida on typical county and city highways and roads that are posted for 35 mph or less and shall be designed to operate under typical environmental conditions, vehicles must conform to Federal Motor Vehicle Safety Standards, State of Florida Vehicle Safety Laws, regulations, specifications, standards, and requirements in effect as of the date of manufacture

• Engine: Electric motor, 48-volt lead acid batteries (8 batteries x 6v), 110v on board charger, 50 miles per charge, max forward speed 25mph, digital speedometer and dashboard

• Body: Plastic body and fiberglass roof, windshield with wiper

• Comfort Items: 4-person seating with flip rear seat for cargo

• Chassis/Steering/Suspension: steel frame type chassis, 500lbs. GVW capacity

• Tires and Wheels: 205/50-10 tires, 10" aluminum rims

• Brakes: 4 wheel hydraulic, hand brake

• Safety Items: 100% Electric with zero emissions, headlights, brake indicators, voltmeter, turn signals, side and rear-view mirrors, reverse alarm, non-slip flooring, neutral switch when vehicle is standing still, horn

Motor Grader: Large specifications.

FSA Base Specification

• Weight: 33,900 lbs.

• Engine: Diesel 140 hp

• Transmission: Power shift with direct drive, 8 forward and 4 reverse speeds

• Brakes: Wet multiple disc

• Steering & Articulation: Front steer plus articulation, minimum articulation 20 degrees

• Blade: 12’ long, with bolt on cutting edge, scarifier with replaceable teeth

• Operator Environment: Low profile enclosed cab, sound suppressed, filtered, tinted glass, A/C and heat, adjustable suspension seat, gauges or engine monitoring system, work lights

• Tires: 13-24 10 PR, radial lug type tires

Motor Grader: Small specifications.

FSA Base Specification

• Weight: 15,200 lbs.

• Engine: Diesel, 110 hp

• Transmission: Hydrostatic drive or power shift

• Brakes: Wet multiple disc

• Steering/Articulation: 18-degree articulation,

• Blade: 10’ blade, replaceable bolt on cutting edge, scarifier with replaceable teeth

• Operator Environment: Low profile enclosed cab, sound suppressed, filtered, tinted glass, A/C and heat, adjustable suspension seat, gauges or engine monitoring system, work lights

• Tires: 15x19.5, lug type tires

Mower: 15ft. Flex Wing Rotary Mower specifications.

FSA Base Specification

• Deck: Mower shall be rotary, flex wing style, 10-gauge steel, replaceable full-length skid shoes

• Blade Carrier & Blades: 7-gauge steel, 1” thick cross bar weldment, “Stump Jumper” pan design, 2 free swinging updraft cutting blades, blade spindles shall be 1 ¼” diameter

• Wheels/Tires: 6 replaceable puncture resistant foam filled airplane tailwheels

• Power Distribution: Main driveline shall be CAT 5, slip clutch protection, a power divider shall have a rating of 190 hp, center and wing gearboxes shall have a rating of 190 hp

• General Features: Mower shall attach to the rear of the tractor using a self-level-lift hitch, front and rear chain deflectors, tongue shall have a jack stand

Mower: Remote Controlled Brush Mower specifications.

FSA Base Specification

• Approximate Dimensions: Length- 57”, width- 59”, height- 33”, weight- 990 lbs.

• Engine: 24 hp gas, pressurized oiling system, electric start

• Track Drive System: Two 48v electric motors, infinitely variable gear reduction transmissions, multi lug type tracks, neoprene rollers

• Mower Deck: Twin spindle deck, 10-gauge mower deck, blade bar 2x22” with 4 free swinging blades, electric clutch assembly w/ integral safety brake, mowing height range- 2 to 7”

• Remote Control: Remote control to control mower functions- travel speed, cutting height, hours, radio signal strength, state of charge of remote-control battery, and mower on/off, remote control working range 328’, max range 984’, auto stop feature for loss of radio signal, rechargeable lithium ion batteries

• Safety: One touch emergency shut off switch

Mower: Electric Zero Turn Radius Mower specifications.

FSA Base Specification

• Electric Power: 36 hp gas equivalent, electric power

• Battery: Battery system with charger to allow 7 hours of mowing time

• Deck: 60” deck, 1.5-5.5” height adjustment, side discharge

• Wheels: 24x12 drive wheels, solid deck wheels

• Operator Station: Suspension seat, ROPS bar

• Mowing Speed: 11 mph (approximate)

Mower: Zero Turn Radius Mower specifications.

FSA Base Specification

• Engine: 25 hp gas engine, positive feed oil system

• Drive Train/Axles: Spin on hydraulic filters

• Deck: 60” heavy duty mower deck, manual deck lift, 1” to 5” cutting height, deck engagement electric clutch

• Wheels: Front wheels- 13x6-6, rear wheels- 24x11.5-12 turf

• Comfort & Convenience: High back full suspension seat, ROPS bar

Pallet Jack: Electric 4,500 lbs. Capacity specifications.

FSA Base Specification

• Weight: 900 lbs.

• Wheelbase: 51”

• Turning Radius: 58”

• Lift Capacity: 4,500 lbs.

• Travel Speed: 3.7 mph

• Gradeability: 8% (loaded)

• Drive: 1.3 kW drive AC motor, polyurethane drive wheels, electric brake, lift motor 1.2 kW

• Battery System: 150 Ah battery, integrated on board charger

• Controls: Tiller type control, multi-function control on tiller handle

Pipe Inspection: Battery Operated Pipe Crawler Inspection System specifications.

Note: Due to the complexity of this type of equipment, it is suggested that the purchaser contact the vendor to ensure the item ordered is a complete, ready-to-work unit and is compatible with the end user’s software/hardware requirements and performance expectations.

FSA Base Specification

• Width: 6”

• Height: 5.5”

• Length: 28”

• Weight: 65 lbs.

• Depth Rating: 160’

• Pipe Range: 8” to 12”

• Speed: 12m/min

• Pull Force: 130 lbs.

• Sensors: Incline, roll, leak, pan/tilt, distance

• Tether Reel: Motorized reel, 1,000’ tether capacity, 1,600 lbs. break strength

• Battery Power: 19.2 VDC, 5-hour battery life, capable of optional hybrid power

• Lighting: 900 LM

• Controller: Weatherproof, splashproof, joystick type controls, battery powered

• Camera: 360-degree pan, 1080p/2mp resolution, tilt 280 degrees, zoom 10x optical 120x digital, focus auto or manual, exposure auto or manual

Pipe Inspection: External Power Pipe Crawler Inspection System specifications.

Note: Due to the complexity of this type of equipment, it is suggested that the purchaser contact the vendor to ensure the item ordered is a complete, ready-to-work unit and is compatible with the end user’s software/hardware requirements and performance expectations. This unit will require an external power supply.

FSA Base Specification

• Width: 6” approximate

• Height: 5.5” approximate

• Length: 28” approximate

• Weight: 65 lbs. approximate

• Pipe Range: 6” to 48”

• Speed: manufacturers’ standard speed

• Pull Force: 130 lbs. approximate

• Sensors: Incline, roll, leak, pan/tilt, distance

• Tether Reel: Motorized reel, level wind 1,000’ tether capacity, 1,200 lbs. pull strength

• External Power: Power to unit from truck, or generator (not included)

• Lighting: 900 LM

• Controller: Weatherproof, splashproof, joystick type controls

• Camera: 360-degree camera rotation, 1080p x 1920p resolution, tilt, zoom 120x digital, focus auto or manual, exposure…