Attachment 3_Q and A_TF33 Engine Work Platforms_Result of the Site Visit.pdf
PDF 105 KB Posted
- Attached to
- TF33 Engine Work Platform
- Solicitation number
- FA813223Q0004
About this file
This document contains questions and answers from a site visit related to Solicitation Number FA813223Q0004 for three Engine Work Platforms specifically designed for vertical TF33 engines. The platforms must have five duplex 110V receptacles located on the back and side walls, additional vertical lighting at the motor entrance, and lift controls with momentary rather than constant functions. The maximum floor load capability is 600 pounds per square foot and platforms must travel from 2 feet to 13 feet in height. Photos of automated lift locks on existing platforms are provided. Area Y29 can be used for equipment laydown.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOW Paragraph, Synopsis/Solicitation, or Attachment Reference
Page Number
Contractor Question Government Response
SOW Part I para 4(k) 2 What specific type of outlets are required for the front of the platform? There are none on the exisiting platforms, but the technicians expressed concern with trip hazards with extension cords used on the back recepticles.
Each platform must have five duplex 110V receptacles; Three each on the back wall and one each on the two side walls near the front opening of the platform.
SOW Part I para 6 4 Can you please provide all structural dimensions for all three areas (Y47, BB47 & Y29) including hoist locations and center points?
Diagrams of each location are provided in the Attachments to CSS.
SOW Part I para 17 and Photograph 2 4 and 6 Verify the need for additional verticle lighting at motor enterance side.
Technician expressed lack of light when loading Engine.
Include light fixtures on back wall and on the two sides near the front opening of the platform as shown in Photograph 2 on page 4 of the SOW.
SOW Part I para 4(e),(g),(h),(q),(r),(s),(t),(u),(v) 2‐3 Provide all desired stop heights. No change. Desired stop heights are called out in the SOW as "Level 1", "Level 2", "Level 3", and "Level 4".
SOW Part I para 4(n),(o),(p),(q),(v) 2‐3 Do you have any specific recommendions/preferences for the lift controls?
**Suggested momentary controls for lifting the platform. Currently there is a constant function which is not wanted and deemed dangerous by technicians.**
No change. Please refer to the SOW.
N/A N/A Please designate a laydown area for the equipment. Area Y29 can be used as a laydown area between building columns Y28 and Y29.
SOW Part I para 4(b) 2 Provide max floor load capabilities. The max floor load capability is approximately 600 pounds per square foot.
SOW Part I para 4(e) 2 Can you please provide us all of the required travel distances for all three lifts? No change. SOW states: From ground level, the platforms should be capable of traveling from a 2 ft. height to a 13 ft. height.
SOW Part I para 4(i) 2 Provide photos of the automated lift locks on backside of P‐Flow lifts to be added to spec for (3) new TF33 Lifts. Photos are provided in the Attachments to CSS.
Requirement: CSS FA813223Q0004 ‐ TF33 Engine Work Platforms
File details come from the government source that posted it. Updated .