1.0_Floorplan_(373765-S1.01)_20171213.pdf

10'

[3.048 m]

10'

[3.048 m]

10'

[3.048 m]

8'

[2.438 m]

46'

[14.021 m]

26'

[7.925 m]

27'-4"

[8.331 m]

BACK

FRONT

RIGHT SIDE

LEFT SIDE

8" CONCRETE

SLAB AROUND

PERIMETER.

27'-4" x 47'-4"

OVERALL

DENOTES

CONCRETE SLAB

4'

[1.219 m]

10'-8"

[3.251 m]

47'-4"

[14.427 m]

8'

[2.438 m]

WORKSTATION 3' x 12'

3'

[0.927 m] 3'

[0.914 m]

3'

[0.914 m]

RACKS

3' x 7'

6'

[1.829 m]

10'

[3.048 m]

3'

[0.914 m]

3'

[0.914 m] iPASSAGE STC

DOUBLE DOOR

4'

[1.321 m]

B

A

3'-8"

[1.105 m]

COM.

RACK

FIRE SUPPRESSION

ELECTRIC SERVICE

4" CONDUIT

VESDA PANEL

GROUND BAR

PS5100MIR9-W

OUTLET

EPO

FIRE SUPPRESSION PULL

STATION AND ABORT

EPO

FIRE ALARM

CONTROL PANEL

INTRUSION

DETECTION

SYSTEM PANEL

INTRUSION

DETECTOR

4' x 8' FIRE RATED

PLYWOOD WITH

COMMUNICATION

PANELS

(2) 2" COMMUNICATIONS

CONDUITS TO 4'x4'

HANDHOLE JUNCTION BOX

1" CONDUIT

5'

[1.524 m]

12'

[3.658 m]

14'-10"

[4.521 m]

INSTALL TUFF-N-EASY

BLACK

" INTERLOCKING

RUBBER FLOOR TILE

THROUGHOUT INTERIOR

SPACE

INSTALL TUFF-N-EASY BLACK

INTERLOCKING RUBBER FLOOR TILE

THROUGHOUT INTERIOR SPACE

S1.01 iFORTRESS

WALL PANEL AND

EQUIPMENT LAYOUT

SHIP TO:

L A

N

J O

B

N

O

GENERATED IN AUTOCAD

DO NOT SCALE DRAWING

END USER ACCEPTANCE DATE INTEGRATOR ACCEPTANCE DATE

IMPORTANT NOTE: ALL INFORMATION

CONTAINED HEREIN IS CONFIDENTIAL

SPECIFICATION REQUIRED WITH SIGNED DRAWINGS

EXTERIOR COLOR OF MCF SERIES iFORTRESS™: BLACK WHITE

(SELECT ONE)

NOTE: THE EXTERIOR AND INTERIOR SURFACES OF THE iPASSAGE DOOR SYSTEM™, AS WELL AS THE INTERIOR OF ALL PANELS ARE FINISHED IN WHITE

B

5/23/17

INTEGRATOR

iFortress iMove ExecuSuite

Model #: i-001196-INT w- Vestibule

NOTES:

BUILDING FLOOR LEVEL SPECIFICATION - FROM THE CENTERLINE OF THE CHANNEL

TROUGH, AN AREA OF THE BUILDING FLOOR EQUAL TO EIGHTEEN INCHES WIDE (18" WIDE),

NINE INCHES (9") TO EITHER SIDE OF THE CENTERLINE, AND AS LONG AS THE LENGTH OF

ALL ASSEMBLED iGUARD ARMOR WALL PANELS™, NOT TO EXCEED

" OVER 8'. IF

DETERMINED AT THE TIME OF THE SITE SURVEY THAT THE DESIGNATED FLOOR AREA IS

NOT WITHIN THESE SPECIFIED TOLERANCES AND PRE-INSTALLATION FLOOR PREPARATION

WORK IS REQUIRED, THIS WORK CAN BE PROVIDED BY iFORTRESS OR OTHERS AT AN

ADDITIONAL COST - SHEET D.12 FOR WALL PANEL TO SLAB DETAIL

*PORTAL PANEL LOCATION AND PORTAL DESIGNATIONS (HIGH OR LOW) MUST BE NOTED ON

FINAL SIGNED DRAWINGS.

**DOOR PANEL FOOTER AND HEADER HEIGHTS TO BE SPECIFIED ON FINAL SIGNED

DRAWINGS. SEE SHEET S.07

PLAN NORTH, SOUTH, EAST IS FOR INSTALLATION PURPOSES ONLY AND DOES NOT

INDICATE TRUE CARDINAL DIRECTIONS.

SEE SHEET S.07 FOR DOOR PANEL DETAIL, SHEET D.04 FOR CAMPORT DETAIL, SHEET D.05

FOR WALL PANEL DETAIL, SHEETS D.06 FOR PORTAL PANEL DETAIL, SHEET D.08 FOR WALL

PANEL CONNECTION AND FINISH DETAIL, D.10 FOR U-STRUT MOUNTING DETAIL AND SHEET

D.11 FOR WALL PANEL TO SLAB DETAIL

DUE TO THE INSTALLATION OF PERIMETER OR END COLUMNS, THE INSTALLATION OF THE

INSIDE CHANNEL PLATES IS NOT CONTINUOUS. THEREFORE, INSIDE CHANNEL PLATES ARE

TO BE CUT IN THE FIELD TO LENGTHS THAT ARE EQUAL TO THE DISTANCES BETWEEN END

COLUMN BASES.

A

RELOCATE CONFERENCE ROOM DOOR

B

REVISIONS PER AIR FORCE COMMENTS

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DEPARTMENT OF

DEFENSE AND U.S. DoD CONTRACTORS ONLY, NECESSARY FOR OPERATION, MAINTENANCE, INSTALLATION, OR TRAINING DURING THE PERFORMANCE OF A

GOVERNMENT CONTRACT, DETERMINED DECEMBER 5, 2017. OTHER REQUESTS

FOR THIS DOCUMENT SHALL BE REFERRED TO USAF AFMC AFLCMC/WNS.

14'-8"

[4.470 m]

26'

[7.925 m]

12'

[3.658 m]

18'-11"

[5.767 m]

1'-2"

[0.356 m]

1'-6"

[0.457 m]

3'-1"

[0.952 m]

3'-1"

[0.952 m]

S1.02 iFORTRESS

WALL PANEL AND

EQUIPMENT LAYOUT

SHIP TO:

L A

N

J O

B

N

O

GENERATED IN AUTOCAD

DO NOT SCALE DRAWING

END USER ACCEPTANCE DATE INTEGRATOR ACCEPTANCE DATE

IMPORTANT NOTE: ALL INFORMATION

CONTAINED HEREIN IS CONFIDENTIAL

SPECIFICATION REQUIRED WITH SIGNED DRAWINGS

EXTERIOR COLOR OF MCF SERIES iFORTRESS™: BLACK WHITE

(SELECT ONE)

NOTE: THE EXTERIOR AND INTERIOR SURFACES OF THE iPASSAGE DOOR SYSTEM™, AS WELL AS THE INTERIOR OF ALL PANELS ARE FINISHED IN WHITE

B

5/23/17

INTEGRATOR

iFortress iMove ExecuSuite

Model #: i-001196-INT w- Vestibule

NOTES:

BUILDING FLOOR LEVEL SPECIFICATION - FROM THE CENTERLINE OF THE CHANNEL

TROUGH, AN AREA OF THE BUILDING FLOOR EQUAL TO EIGHTEEN INCHES WIDE (18" WIDE),

NINE INCHES (9") TO EITHER SIDE OF THE CENTERLINE, AND AS LONG AS THE LENGTH OF

ALL ASSEMBLED iGUARD ARMOR WALL PANELS™, NOT TO EXCEED

" OVER 8'. IF

DETERMINED AT THE TIME OF THE SITE SURVEY THAT THE DESIGNATED FLOOR AREA IS

NOT WITHIN THESE SPECIFIED TOLERANCES AND PRE-INSTALLATION FLOOR PREPARATION

WORK IS REQUIRED, THIS WORK CAN BE PROVIDED BY iFORTRESS OR OTHERS AT AN

ADDITIONAL COST - SHEET D.12 FOR WALL PANEL TO SLAB DETAIL

*PORTAL PANEL LOCATION AND PORTAL DESIGNATIONS (HIGH OR LOW) MUST BE NOTED ON

FINAL SIGNED DRAWINGS.

**DOOR PANEL FOOTER AND HEADER HEIGHTS TO BE SPECIFIED ON FINAL SIGNED

DRAWINGS. SEE SHEET S.07

PLAN NORTH, SOUTH, EAST IS FOR INSTALLATION PURPOSES ONLY AND DOES NOT

INDICATE TRUE CARDINAL DIRECTIONS.

SEE SHEET S.07 FOR DOOR PANEL DETAIL, SHEET D.04 FOR CAMPORT DETAIL, SHEET D.05

FOR WALL PANEL DETAIL, SHEETS D.06 FOR PORTAL PANEL DETAIL, SHEET D.08 FOR WALL

PANEL CONNECTION AND FINISH DETAIL, D.10 FOR U-STRUT MOUNTING DETAIL AND SHEET

D.11 FOR WALL PANEL TO SLAB DETAIL

DUE TO THE INSTALLATION OF PERIMETER OR END COLUMNS, THE INSTALLATION OF THE

INSIDE CHANNEL PLATES IS NOT CONTINUOUS. THEREFORE, INSIDE CHANNEL PLATES ARE

TO BE CUT IN THE FIELD TO LENGTHS THAT ARE EQUAL TO THE DISTANCES BETWEEN END

COLUMN BASES.

A

RELOCATE CONFERENCE ROOM DOOR

B

REVISIONS PER AIR FORCE COMMENTS

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S.

DoD CONTRACTORS ONLY, NECESSARY FOR OPERATION, MAINTENANCE, INSTALLATION, OR

TRAINING DURING THE PERFORMANCE OF A GOVERNMENT CONTRACT, DETERMINED DECEMBER 5,

2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO USAF AFMC AFLCMC/WNS.

3'-8"

[1.116 m]

3'

[0.921 m]

19'-3"

[5.862 m]

14'-8"

[4.470 m]

46'

[14.021 m]

6'

[1.829 m]

1'-2"

[0.356 m]

9'-10"

[2.997 m]

1'-6"

[0.457 m]

S1.03 iFORTRESS

WALL PANEL AND

EQUIPMENT LAYOUT

SHIP TO:

L A

N

J O

B

N

O

GENERATED IN AUTOCAD

DO NOT SCALE DRAWING

END USER ACCEPTANCE DATE INTEGRATOR ACCEPTANCE DATE

IMPORTANT NOTE: ALL INFORMATION

CONTAINED HEREIN IS CONFIDENTIAL

SPECIFICATION REQUIRED WITH SIGNED DRAWINGS

EXTERIOR COLOR OF MCF SERIES iFORTRESS™: BLACK WHITE

(SELECT ONE)

NOTE: THE EXTERIOR AND INTERIOR SURFACES OF THE iPASSAGE DOOR SYSTEM™, AS WELL AS THE INTERIOR OF ALL PANELS ARE FINISHED IN WHITE

B

5/23/17

INTEGRATOR

iFortress iMove ExecuSuite

Model #: i-001196-INT w- Vestibule

NOTES:

BUILDING FLOOR LEVEL SPECIFICATION - FROM THE CENTERLINE OF THE CHANNEL TROUGH, AN AREA OF THE

BUILDING FLOOR EQUAL TO EIGHTEEN INCHES WIDE (18" WIDE), NINE INCHES (9") TO EITHER SIDE OF THE

CENTERLINE, AND AS LONG AS THE LENGTH OF ALL ASSEMBLED iGUARD ARMOR WALL PANELS™, NOT TO EXCEED

" OVER 8'. IF DETERMINED AT THE TIME OF THE SITE SURVEY THAT THE DESIGNATED FLOOR AREA IS NOT WITHIN

THESE SPECIFIED TOLERANCES AND PRE-INSTALLATION FLOOR PREPARATION WORK IS REQUIRED, THIS WORK

CAN BE PROVIDED BY iFORTRESS OR OTHERS AT AN ADDITIONAL COST - SHEET D.12 FOR WALL PANEL TO SLAB

DETAIL

*PORTAL PANEL LOCATION AND PORTAL DESIGNATIONS (HIGH OR LOW) MUST BE NOTED ON FINAL SIGNED

DRAWINGS.

**DOOR PANEL FOOTER AND HEADER HEIGHTS TO BE SPECIFIED ON FINAL SIGNED DRAWINGS. SEE SHEET S.07

PLAN NORTH, SOUTH, EAST IS FOR INSTALLATION PURPOSES ONLY AND DOES NOT INDICATE TRUE CARDINAL

DIRECTIONS.

SEE SHEET S.07 FOR DOOR PANEL DETAIL, SHEET D.04 FOR CAMPORT DETAIL, SHEET D.05 FOR WALL PANEL

DETAIL, SHEETS D.06 FOR PORTAL PANEL DETAIL, SHEET D.08 FOR WALL PANEL CONNECTION AND FINISH DETAIL, D.10 FOR U-STRUT MOUNTING DETAIL AND SHEET D.11 FOR WALL PANEL TO SLAB DETAIL

DUE TO THE INSTALLATION OF PERIMETER OR END COLUMNS, THE INSTALLATION OF THE INSIDE CHANNEL PLATES

IS NOT CONTINUOUS. THEREFORE, INSIDE CHANNEL PLATES ARE TO BE CUT IN THE FIELD TO LENGTHS THAT ARE

EQUAL TO THE DISTANCES BETWEEN END COLUMN BASES.

A

RELOCATE CONFERENCE ROOM DOOR

B

REVISIONS PER AIR FORCE COMMENTS

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S.

DoD CONTRACTORS ONLY, NECESSARY FOR OPERATION, MAINTENANCE, INSTALLATION, OR

TRAINING DURING THE PERFORMANCE OF A GOVERNMENT CONTRACT, DETERMINED DECEMBER 5,

2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO USAF AFMC AFLCMC/WNS.