Atch_14_ICIDS_Test_and_Maintenace_Report_Template.pdf

ICIDS System Test/Maintenance Service Record

Unit /Activity Name: Date of Test /Service:

Bldg & Zone # POC & Phone #

1. ICIDS Sensor Test

Section A: Balanced Magnetic Sensor (BMS)

1. Inform the Police Dispatcher that a monthly ICIDS system test is going to be performed.

2. Ensure all doors and windows are closed.

3. Arm the system.

4. Go to each BMS, and slowly open each door or window more than two inches.

The RAD Panel light should start blinking green. If the light does not blink the system is malfunctioning.

5. Reset the alarm system prior to the next test.

Number of BMS tested: Number of BMS failed:

Section B: Passive Infrared Motion Sensor (PIMS)

1. Position yourself in front of the PIMS, once in front of the PIMS start waving until the green light on the RADC panel starts blinking. If the light does not blink the system is malfunctioning.

2. Go to each PIMS and conduct the same test.

3. Reset the alarm system prior to the next test.

Number of PIMS tested: Number of PIMS failed:

Section C: DURESS Devices

1. Pull down the red lever on all duress devices. The green light on the RADC panel starts blinking. If the light does not blink the system is malfunctioning.

2. Use the white duress key to reset the duress alarm.

3. Reset the alarm system prior to the next test.

Number of Duress tested: Number of Duress failed:

Section D: RF DURESS Devices

1. For testing RF Duress Devices an ICIDS representative must be present to reset the system.

2. Press the Duress button on all RF devices.

3. The police dispatcher will ensure that the correct devices have activated.

4. To clear the panel enter your pic and pin numbers twice to arm and disarm and or disarm and to rearm.

Report Date:

Number of Duress tested: Number of Duress failed:

2. ICIDS Maintenance Request/Report a.

b. Maintenance Start Date: ____________ Completion Date:____________

c. Maintenace Action Taken:_________________________________________

Name of Servicing Technician Signature Date

Additional Comments: _____________________________________________________

Description of error or problem: _______________________________