e._Electrical-06-17-24-Walton_County_Public_Transit_Building-Sealed.pdf

E L E C T R I C A L G E N E R A L N O T E S A. CONTRACTOR SHALL COORDINATE ALL WORK WITH OTHER TRADES PRIOR TO INSTALLATION. REFER TO MECHANICAL AND PLUMBING DRAWINGS FOR EXACT SIZE AND LOCATION OF

EQUIPMENT WHICH IS FURNISHED BY OTHERS AND CONNECTED BY ELECTRICAL.

B. RECEPTACLES, SWITCHES AND COVERPLATES COLOR SHALL BE SELECTED BY THE ARCHITECT FROM STANDARD COLORS.

C. VERIFY ALL DOOR SWINGS WITH ARCHITECTURAL DRAWINGS PRIOR TO ROUGHING-IN WALL FOR SWITCHES.

D. LOCATION OF LIGHTING FIXTURES, DISCONNECT SWITCHES, ETC. FOR MECHANICAL EQUIPMENT/ROOM SHALL BE COORDINATED WITH FINAL MECHANICAL EQUIPMENT LOCATION TO

PROVIDE NATIONAL ELECTRIC CODE REQUIRED ACCESS SPACE.

E. FINAL CONNECTION TO ALL MOTORS SHALL BE WITH FLEXIBLE CONDUIT CONNECTION.

F. ALL EXIT AND EMERGENCY FIXTURES SHALL BE CONNECTED TO LIGHT CIRCUIT AHEAD OF LOCAL SWITCH.

G. ALL PANELBOARDS, BACKBOARDS, TERMINAL CABINETS, ETC SHALL HAVE CUSTOM ENGRAVED MICARTA NAMEPLATE MECHANICALLY AFFIXED IDENTIFYING SYSTEM.

H. PROVIDE GREEN GROUND CONDUCTOR IN ALL CIRCUITS - SIZE PER N.E.C.

I. ALL EXPOSED CONDUITS, BOXES, STRAPS AND HANGERS IN THE CONTRACT AREA WHETHER NEW OR EXISTING THAT ARE PART OF THE ELECTRICAL SYSTEM SHALL BE PAINTED TO

MATCH ADJACENT FINISH.

J. PROVIDE CONCRETE MARKER AT END OF ALL CONDUITS STUBBED OUT OF BUILDING FOR FUTURE USE. MARKER SHALL BE 6" DIA X 18" HIGH WITH 2" ABOVE FINISHED GRADE. INSCRIBE IN TOP OF MARKER "E" FOR ELECTRICAL,"T" FOR TELEPHONE,"V" FOR TV CABLE,"F" FOR FIRE ALARM, AND "IC" FOR INTERCOM.

K. GENERAL CONTRACTOR SHALL FIELD-VERIFY ALL EXISTING CONDITIONS PRIOR TO BEGINNING ANY WORK, AND SHALL IMMEDIATELY NOTIFY THE ARCHITECT OF ANY DISCREPANCIES.

FAILURE TO DO SO INDICATES THAT THE CONTRACTOR ACCEPTS THE CONDITIONS AS THEY EXIST, AND SHALL PERFORM THE WORK REQUIRED AS SHOWN AND SPECIFIED.

L. THE ELECTRICAL CONTRACTOR SHALL OBTAIN AND REVIEW THE MECHANICAL AND SPECIAL EQUIPMENT SUBMITTALS PRIOR TO SUBMITTING THE ELECTRICAL SUBMITTALS. ANY ELECTRICAL EQUIPMENT, CONDUIT, AND WIRE SIZE CHANGES RESULTING FROM THIS REVIEW SHALL ALSO BE SUBMITTED FOR APPROVAL.

M. THE ELECTRICAL CONTRACTOR SHALL PROVIDE FAULT CURRENT CALCULATIONS FOR THE SERVICE EQUIPMENT AND SHALL MARK THE EQUIPMENT WITH THE AVAILABLE FAULT CURRENT AND DATE OF THE CALCULATION PER NEC 110.24. REFER TO TYPICAL SERVICE EQUIPMENT FAULT CURRENT LABEL DETAIL.

N. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ARC FAULT LABELS PER NFPA 70E ARTICLE 110.16 FOR NEW EQUIPMENT. THE OWNER SHALL PROVIDE AVAILABLE CALCULATION DATA FOR THE EXISTING EQUIPMENT IN THE ELECTRICAL SYSTEM. REFER TO TYPICAL ARC FLASH HAZARD LABEL DETAIL.

O. PROVIDE NEUTRAL AT ALL LINE VOLTAGE SWITCH LOCATIONS PER N.E.C. 404.2(C).

P. PROVIDE BUSHINGS ON ALL CONDUIT.

Q. COMPLY WITH ALL LOCAL CODE, LAWS, AND ORDINANCES APPLICABLE TO ELECTRICAL WORK, THE STATE BUILDING CODE AND THE NATIONAL ELECTRIC CODE. OBTAIN ALL PERMITS

REQUIRED BY LOCAL ORDINANCES.

R. OBTAIN ARCHITECTS APPROVAL OF ALL LIGHT FIXTURES, SWITCHES, RECEPTACLES, PANELBOARDS, ETC. PRIOR TO PURCHASING.

S. THE ELECTRICAL WORK SHALL BE INSTALLED IN A NEAT AND WORKMANLIKE MANNER. ALL NOT SO INSTALLED SHALL BE REMOVED AND REPLACED AT NO COST TO THE OWNER.

T. ALL WORK SHALL BE INSTALLED IN CONCEALED TYPE CONSTRUCTION. UNDERGROUND CONDUITS UP TO FIRST BOX IN CONCEALED CONSTRUCTION MAY BE SCH.40 PVC. EXTERIOR EXPOSED WORK SHALL BE I.M.C. BRANCH CIRCUIT CONDUIT RUN IN OPEN SPACES ABOVE CEILING OR IN WALLS MAY BE THINWALL (E.M.T.) CONDUIT 1/2" MIN. SIZE.

U. ALL CONDUCTORS LESS THAN 100A. SHALL BE COPPER #12 & #10 SOLID, #8 AND LARGER STRANDED, #6 AND SMALLER TO BE TYPE THWN, 600 VOLT INSULATION AND TYPE THWN OR THHN FOR #4 AND LARGER. ALUM. CONDUCTORS MAY BE USED FOR 100A. AND LARGER ONLY WHERE USED WITH COMPRESSION TERMINATIONS.

V. PROVIDE GROUNDING PER NATIONAL ELECTRIC CODE.

W. THE CONTRACTOR SHALL LEAVE THE ENTIRE ELECTRICAL SYSTEM INSTALLED IN PROPER WORKING ORDER, AND SHALL REPLACE WITHOUT ADDITIONAL COST, ALL WORK OR MATERIAL WHICH MAY DEVELOP DEFECTS, (ORDINARY WEAR AND TEAR OR DAMAGE RESULTING FROM IMPROPER HANDLING EXCEPTED) WITHIN A PERIOD OF ONE (1) YEAR FROM THE DATE OF

FINAL ACCEPTANCE BY THE OWNER.

EXIT SIGN; BACK MOUNTED; ARROWS AS NOTED; SHADED SECTION INDICATES LIGHTED FACE OF EXIT SIGN

JUNCTION BOX; MOUNTED ABOVE CEILING

JUNCTION BOX; MOUNTED FLUSH IN WALL WITH BLANK COVER

A-1 ADJACENT TO ARROW INDICATES HOMERUN OF CIRCUIT NO. 1 TO PANEL A; "B" INDICATES FIXTURE TYPE; MARKS ACROSS RACEWAY RUN INDICATES THE NUMBER OF NO. 12 CONDUCTORS; UNLESS NOTED OTHERWISE NO MARKS INDICATES TWO NO. 12 CONDUCTORS AND ONE NO. 12 GREEN GROUND CONDUCTOR IN 1/2" CONDUIT

1' X 4' FIXTURE; CEILING MOUNTED; ARROW INDICATES LENS DIRECTION

(2#12 & 1#12 GND-1/2"C)

WALL BRACKET FIXTURE

E L E C T R I C A L L E G E N D A-1 'B'

DUPLEX RECEPTACLE; 125V; 20A; 3 POLE GND; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA 5-20R; HUBBELL SERIES HBL5352

DUPLEX RECEPTACLE; 125V; 20A; 3 POLE GND; GFI; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA GF-5-20R; HUBBELL SERIES GF5362

LETTERS "WP" ADJACENT TO SYMBOL INDICATES GFI WEATHER RESISTANT RECEPTACLE; HUBBELL HBLGFBFHP20 SERIES WITH WEATHERPROOF COVER;

QUAD RECEPTACLE; 125V; 20A; 3 POLE GND; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA 5-20R; HUBBELL SERIES HBL5352

LETTERS +XX" ADJACENT TO SYMBOL INDICATES RECEPTACLE MOUNTING HEIGHT.

+DF" = VERIFY HEIGHT FOR DRINKING FOUNTAIN WITH MECHANICAL CONTRACTOR

QUAD RECEPTACLE; 125V; 20A; 3 POLE GND; GFI; MT 18" AFF TO C/L UNLESS NOTED OTHERWISE; NEMA GF-5-20R; HUBBELL SERIES GF5362

HUBBELL/TAYMAC MR420CW COVER.

EXHAUST FAN; FURNISHED BY OTHERS

NON-FUSED DISCONNECT SWITCH; AMP SIZE AS NOTED

RACEWAY INSTALLED CONCEALED IN WALLS AND/OR ABOVE CEILING

RACEWAY INSTALLED CONCEALED IN FLOOR SLAB AND/OR BELOW GRADE

RACEWAY INSTALLED EXPOSED

CONDUIT STUB UP WITH FLEXIBLE CONDUIT CONNECTION TO EQUIPMENT

FLEXIBLE CONDUIT CONNECTION

WALL SWITCH; 120/277V; 20A; 1 POLE; A.C. ONLY; MT 48" AFF TO C/L; HUBBELL SERIES HBL1221

PANEL; 120/240V; MT 72" AFF TO TOP

LOW VOLTAGE WALL SWITCH; CONNECT TO NON-NETWORKED ROOM CONTROLLER; MT 48" AFF TO C/L; REFER TO SPECS; REFER TO LIGHTING CONTROL DETAILS. NUMBER "#" INDICATES BUTTON COUNT; REFER TO LOW VOLTAGE SWITCH MATRIX FOR SPECIFIC INFORMATION.

LIGHTING CONTROLS ROOM CONTROLLER; INSTALL CONCEALED ABOVE CEILING SPACE; REFER TO LIGHTING CONTROLS DETAILS

LOW VOLTAGE OCCUPANCY SENSOR; 360° DUAL-TECHNOLOGY TYPE; CEILING MOUNTED; UNLESS OTHERWISE NOTED; REFER TO LIGHTING CONTROLS DETAILS

LOW VOLTAGE VACANCY SENSOR; 360° DUAL-TECHNOLOGY TYPE; CEILING MOUNTED; UNLESS OTHERWISE NOTED; REFER TO LIGHTING CONTROLS DETAILS

- LIGHTSLTS

- UNLESS NOTED OTHERWISE

- WEATHERPROOF

- CONDENSING UNIT

- AIR CONDITIONER

- WATER HEATER

- RECEPTACLE

WP

COND

A/C

WH

UNO

REC

- CENTERLINE

- EXHAUST FAN

- ABOVE FINISHED FLOOR

ABBREVIATIONS

- GROUND FAULT PROTECTION

- GROUND CONDUCTOR

- ELECTRICAL CONTRACTOR

- CONDUITC.

C/L

EC

GND

LTG

GFI

EF

- LIGHTING

AFF

- INTERMEDIATE METAL CONDUITIMC

- POLYVINYL CHLORIDE CONDUITPVC

- ELECTRICAL METALLIC TUBINGEMT

- NATIONAL ELECTRIC CODE (NFPA-70)NEC

- NATIONAL FIRE PROTECTION ASSOCIATIONNFPA

PHOTOCELL; REFER TO LIGHTING CONTROL DIAGRAM

WALL MOUNT LINEAR FIXTURE

LIGHTING CONTROL GENERAL NOTES

A. THE DIAGRAMS ARE NOT INTENDED TO SHOW EXACT QUANTITIES OF DEVICES. REFER TO PLAN FOR ESTIMATED DEVICE QUANTITIES AND LOCATIONS.

B. THE LOCAL DEVICE INTERCONNECTIONS FOR ALL LIGHTING CONTROL DEVICES SHALL BE OF THE TOPOLOGY FREE TYPE.

C. COLORS FOR ALL DEVICES AND DEVICE COVERS SHALL BE SELECTED BY THE ARCHITECT.

D. ALL DATA LINE SWITCHES SHALL INCLUDE CUSTOM ENGRAVED LABEL INDICATING FUNCTION OF SWITCH. COORDINATE EXACT LABEL DESCRIPTIONS WITH OWNER PRIOR TO INSTALLATION.

E. PROVIDE ADDITIONAL POWER AND CONTROL MODULES AS RECOMMENDED BY THE SYSTEM SUPPLIER.

F. THE DIAGRAMS REPRESENT A TYPICAL SYSTEM AND ARE NOT INTENDED FOR INSTALLATION, SYSTEM SUPPLIER SHALL PROVIDE INSTALLATION DRAWINGS AND WIRING DIAGRAMS.

G. E.C. SHALL COORDINATE FIELD PROGRAMMING OF LIGHTING CONTROL SYSTEM WITH SYSTEM PROGRAMMER, SPECIFYING ENGINEER, AND OWNER TO ENSURE PROPER OPERATION AND TIME

SCHEDULES.

H. ALL EMERGENCY AND EXIT LIGHTING CIRCUITS SHALL BE CONNECTED TO CONTINUOUS POWER SOURCE AHEAD OF RELAY PANEL OR INDIVIDUAL RELAY COMPONENTS.

I. INSTALL ALL CEILING SENSORS MINIMUM OF 6FT CLEAR OF DUCT REGISTERS.

J. PROGRAMMER / COMMISSIONING AGENT SHALL BE CERTIFIED BY THE EQUIPMENT MANUFACTURER ON THE SYSTEM INSTALLED.

K. THE MANUFACTURER CERTIFIED TECHNICIAN WILL MEET ONSITE WITH THE ELECTRICAL CONTRACTORS TO COORDINATE INSTALLATION DETAILS, REVIEW BEST PRACTICES, AND DISCUSS PROJECT SPECIFIC CHALLENGES; PRIOR TO THE INSTALLATION BEING STARTED, ENABLING THE CONTRACTORS TO WORK WITH THE TECHNICIAN TO PREPARE AND MAKE CHANGES UP FRONT.

L. THE MANUFACTURER'S LIGHTING SYSTEMS TEAM SHALL WORK ONSITE AFTER FIXTURE AND CONTROLS INSTALLATION IS COMPLETED. THE MANUFACTURER'S AGENT IS TO VERIFY THE PROJECT IS REVIEWED AND CHECKED FOR PROPER WIRING, INSTALLATION AND FUNCTIONALITY OF THE SYSTEM AS A WHOLE. ANY PROBLEMS SHALL BE ADDRESSED AND RESOLVED WITH THE ONSITE

CONTRACTORS.

M. MANUFACTURER'S TECHNICIANS SHALL MAP OUT THE FIXTURE LOCATIONS AND ADDRESSES WITHIN THE LIGHTING CONTROL SOFTWARE. ASTRONOMIC TIMECLOCK EVENTS, SCENES, AND SCHEDULES ARE PROGRAMMED ACCORDING TO A PRE-DEFINED SCRIPT. THESE EVENTS, SCENES, AND SCHEDULES ARE TESTED AND FINALIZED FOR FINAL APPROVAL BY THE PROJECT'S

OWNERSHIP.

N. MANUFACTURER'S TECHNICIANS SHALL PROVIDE TRAINING FOR SYSTEM USERS AND THE SYSTEM MAINTENANCE TEAM. THE DETAILS OF THE TECHNOLOGY SHALL BE COVERED FROM A MAINTENANCE AND TROUBLESHOOTING POINT OF VIEW. THIS COVERS THE LIGHTING CONTROL SYSTEM AND ITS CORE FUNCTIONALITY, WITH A FOCUS ON HOW TO EDIT EXISTING SCENES AND

ASTRONOMIC LIGHTING EVENTS.

O. THE MANUFACTURER'S REPRESENTATIVE SHALL PROVIDE IN-DEPTH TRAINING TO THE END USER ON MANAGING THE SPECIFIC CONTROL SYSTEM, GIVING THEM THE TOOLS AND KNOWLEDGE TO

OPERATE THEIR SYSTEM.

2023 FLORIDA BUILDING CODE 8TH EDITION

PROJECT BUILDING CODE

2020 NFPA 70 NATIONAL ELECTRICAL CODE

DIGITAL TIMESWITCH WITH RESERVE POWER; REFER TO LIGHTING CONTROL DIAGRAM FOR TYPE

Job No.Christopher A. Garick; FL. PE No.53924 Thomas A. Alexander; FL. PE No.73172 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

23004

4/4/2023

DRAWING NUMBER:

DATE: FILE:

SHEET TITLE:

APPROVED BY:

REVISIONS:

21014

St ok es A rc hi te ct ur al

, I nc

St ok es A rc hi te ct ur al

, i nc

. h er eb y ex pr es sl y re se rv es it s co m m on -la w c op yr ig ht a nd o th er p ro pe rty ri gh ts to th es e pl an s.

D ra w in gs a re n ot to b e re pr od uc ed

, c ha ng ed

, o r c op ie d in a ny fo rm w ha ts oe ve r, no r a re th ey to b e as si gn ed to a ny th ird p ar ty w ith ou t f irs t o bt ai ni ng th e ex pr es s w rit te n pe rm is si on a nd c on se nt o f S to ke s

Ar ch ite ct ur al

, i nc

DRAWN BY:

R.E.

CHECKED BY:

C.P.

Ar ch ite ct ur e

M as te r P la nn in g

In te rio r D es ig n

C lo ve rd al e

Bo ul ev ar d Fo rt W al to n Be ac h, F lo rid a

Ph on e:

(8

) 6

-2

F ax

0)

-6

FL

L ic en se

: A

R

L C or p

Li ce ns e

A

AC

Architectural Inc.

Stokes

M ir a m a r

B ea ch

Fl o ri d a

Drift woo d Tr ansi t Sto p &

Rest room

- W alto n Co unty

D ri ft w o o d R o a d

PROFESSIONAL SEAL:

AR009663009-19-2018

E0.1

LEGEND AND NOTES

http://www.Humber-Garick.com

BF

O

BF

O

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO BFO BFO BFO BFO BFO BFO BFO BFO BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

BFO

S

S

S

S S

S

O H

L

O H

L

O H

L

O H

L

OHL

OHL

OHL

OHL

O H

L O

H L

O H

L O

H L

O H

L

OHL

OHL

OHL

OHL

O O O O O O O

O O

O O

O O

O O

O O

O O

O O

TT

E

T

T

W L

W L

W L

W L

W L

W L

W L

W L

W L

W L

W L

W L

W L

W L

EX

IS

TI

N

G

-W

AY

(F U

TU

R

E 1-

W

AY

N O

R

TH

8 GOLF CART

PARKING SPACES

FUTURE

ELECTRIC

VEHICLE

CHARGING

PEDESTALS

BY

OTHERS

7 GOLF CART

PARKING SPACES

EX

IS

TI

N

G

-W

AY

(F U

TU

R

E 1-

W

AY

N O

R

TH

30+/- BICYCLE

PARKING SPACES

PO

R

C H

PU

BLIC

R

ESTR

O O

M

AN

D

TR

AN

SIT

FAC

ILITY

BU

ILD

IN

G

NEW PANEL P

UNDERGROUND SECONDARY

SERVICE ENTRANCE.

REFER TO SINGLE LINE POWER RISER

HANDHOLE FOR FUTURE

EV CHARGING STATIONS

BY OTHERS

(2) TWO 1-1/2" CONDUIT

WITH PULL RIBBON FOR

FUTURE USE BY OTHERS

1" CONDUIT TO SITE LIGHTING

REFER TO CIVIL DRAWINGS.

CT. CABINET AND

ELECTRIC METER

NEW SECONDARY PEDESTAL

BY UTILITY COMPANY

EXISTING UTILITY

TRANSFORMER

POWER POLE

Job No.Christopher A. Garick; FL. PE No.53924 Thomas A. Alexander; FL. PE No.73172 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

23004

4/4/2023

DRAWING NUMBER:

DATE: FILE:

SHEET TITLE:

APPROVED BY:

REVISIONS:

21014

St ok es A rc hi te ct ur al

, I nc

St ok es A rc hi te ct ur al

, i nc

. h er eb y ex pr es sl y re se rv es it s co m m on -la w c op yr ig ht a nd o th er p ro pe rty ri gh ts to th es e pl an s.

D ra w in gs a re n ot to b e re pr od uc ed

, c ha ng ed

, o r c op ie d in a ny fo rm w ha ts oe ve r, no r a re th ey to b e as si gn ed to a ny th ird p ar ty w ith ou t f irs t o bt ai ni ng th e ex pr es s w rit te n pe rm is si on a nd c on se nt o f S to ke s

Ar ch ite ct ur al

, i nc

DRAWN BY:

R.E.

CHECKED BY:

C.P.

Ar ch ite ct te r P la nn rio r D es ig n

C lo ve rd al e

Bo ul ev ar d Fo rt W al to n Be ac h, F lo rid a

Ph on e:

(8

) 6

-2

0)

-6

FL

L ic en se

: A

R

C or p

Li ce ns e

A

AC

Architectural Inc.

Stokes

M ir a m a r

B ea ch

Fl o ri d a

Drift woo d Tr ansi t Sto p &

Rest room

- W alto n Co unty

D ri ft w o o d R o a d

PROFESSIONAL SEAL:

AR009663009-19-2018

SITE PLAN - ELECTRICAL

1" = 20'-0" 10' 20' 40'

E1.1

SITE PLAN - ELECTRICAL

SEE LIGHTING CONTROL DETAILS

FOR PHOTOCELL CONNECTION

4 'L1'

3 'L1'3 'L1'

3 'WB'

'X'

'X''X'

'L2' 'L2'

'L2'

NEW PANEL P

COND UNIT (CU)

REFER TO MECHANICAL PLANS

AIR HANDLER (AHU)

REFER TO MECHANICAL PLANS

SEE LIGHTING CONTROL DETAIL

FOR TIMESWITCH CONNECTION

HOMERUN VIA

EXTERIOR LIGHTING

CONTACTOR

ELECTRIC WATER HEATER (EWH)

REFER TO PLUMBING PLANS

NOTES

1. ROOM CONTROLLERS SHALL BE LOCATED IN

ELECTRICAL ROOM; SHOWN ADJACENT TO THE

LIGHTING CIRCUIT SERVED FOR SIMPLICITY.

KEYNOTES

COORDINATE LOCATION

WITH ARCHITECT PRIOR TO

ROUGH-IN.

NEW METER AND CT CABINET

EF-1 & 2

REFER TO MECH PLANS

Job No.Christopher A. Garick; FL. PE No.53924 Thomas A. Alexander; FL. PE No.73172 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

23004

4/4/2023

DRAWING NUMBER:

DATE: FILE:

SHEET TITLE:

APPROVED BY:

REVISIONS:

21014

St ok es A rc hi te ct ur al

, I nc

St ok es A rc hi te ct ur al

, i nc

. h er eb y ex pr es sl y re se rv es it s co m m on -la w c op yr ig ht a nd o th er p ro pe rty ri gh ts to th es e pl an s.

D ra w in gs a re n ot to b e re pr od uc ed

, c ha ng ed

, o r c op ie d in a ny fo rm w ha ts oe ve r, no r a re th ey to b e as si gn ed to a ny th ird p ar ty w ith ou t f irs t o bt ai ni ng th e ex pr es s w rit te n pe rm is si on a nd c on se nt o f S to ke s

Ar ch ite ct ur al

, i nc

DRAWN BY:

R.E.

CHECKED BY:

C.P.

Ar ch ite ct te r P la nn rio r D es ig n

C lo ve rd al e

Bo ul ev ar d Fo rt W al to n Be ac h, F lo rid a

Ph on e:

(8

) 6

-2

0)

-6

FL

L ic en se

: A

R

C or p

Li ce ns e

A

AC

Architectural Inc.

Stokes

M ir a m a r

B ea ch

Fl o ri d a

Drift woo d Tr ansi t Sto p &

Rest room

- W alto n Co unty

D ri ft w o o d R o a d

PROFESSIONAL SEAL:

AR009663009-19-2018

FLOOR PLAN - ELECTRICAL

1/4" = 1'-0" 2' 4' 8'

E2.1

FLOOR PLAN - ELECTRICAL

FLOOR PLAN - LIGHTING

1/4" = 1'-0" 2' 4' 8'

SERVED FROM MAIN PANEL

TYPICAL ELECTRICAL EQUIPMENT NAMEPLATE

1 PHASE 3 WIRE

PANEL P

IN ELECTRICAL ROOM

NOT TO SCALE

120/240 VOLTS

ATTACH TO

WALL STUD

INSTALLATION DETAIL

NOT TO SCALE

18"

AFF

TYPICAL POWER OUTLET

22,000 AIC RATING

TYPICAL SERVICE EQUIPMENT FAULT CURRENT LABEL DETAIL

NOT TO SCALE

WARNING

MAXIMUM AVAILABLE FAULT CURRENT

/ / DATE OF CALCULATION

SYMMETRICAL RMS AMPERES

EQUIPMENT NAME

COMPANY RESPONSIBLE FOR CALCULATION CONTACT INFORMATION; COMPANY NAME, ADDRESS, PHONE NUMBER

TYPICAL ARC FLASH HAZARD LABEL DETAIL

NOT TO SCALE

Arc Flash and Shock Risks Appropriate PPE Required

WARNING

ARC FLASH RISK PROTECTION MINIMUM PPE

SHOCK PROTECTION

Arc Flash Boundary 19 in Incident Energy: 1.3 cal/cm^2

Shock Risk When 480 VAC Cover is Removed Limited Approach: 42 in Restricted Approach: 12 in

4 cal/sq cm, FR shirt (long-sleeve) plus FR pants (long), or FR coverall, rainwear as needed.

Hardhat + Safety Glasses or Goggles + Ear Canal Inserts Glove Class 00 Leather work shoes

Bus ID:

Prot Device ID:

Calculated Fault Current:

Date of Analysis:

Warning: Changes in equipment settings or system configuration may invalidate the calculated results.

WHITE

ORANGE

4"H x 6"W VINYL LABEL WITH

BLACK LETTERING PER ANSI Z535 STANDARDS.

WHITE

ORANGE

4"H x 6"W VINYL LABEL WITH

BLACK LETTERING PER ANSI Z535 STANDARDS.

MICARTA ENGRAVED NAMEPLATE

WITH WHITE LETTERS ON BLACK

BACKGROUND, MECHANICALLY AFFIXED.

1/4" LETTERS

1/2" LETTERS

CONDUIT

RECEPTACLE

TYPICAL STUD

2-GANG JUNCTION BOX

EQUAL TO THOMAS &

BETTS 2G-3/4.

BOX MOUNTING BRACKET

EQUAL TO THOMAS & BETTS

SSF-SH2346

2-GANG BOX COVER WITH

1-GANG RING EQUAL TO

THOMAS & BETTS 52-C-14-5/8

EXTERIOR LIGHTING CONTROL DIAGRAM

TO

S

IT

E

LIG

HT

IN

G

(R

EF

ER

C

IV

IL

DR

AW

IN

GS

NOT TO SCALE

UNLATCH

L1

LATCH

L1

NH

PHOTON.O. C.C.N.O

INPUTS

N

H

CKT 2CKT 1

DIGITAL TIMESWITCH WITH

ASTRONOMIC OPTION

EQUAL TO TORK #DGUM100A

PHOTO ELECTRIC CONTROL

TORK MODEL EPCA

LIGHTING CONTACTOR

4-POLE, MECHANICALLY HELD 120V

COIL, LIGHTING CONTACTOR

LA

TC

H

UN

LA

TC

H

EX

TE

RI

OR

LI

GH

TS

SP

AR

E

SP

AR

E

P-

P- 4-

LOW VOLTAGE WALL

SWITCH EQUAL TO

WATTSTOPPER

LMSW-102-W

Wattstopper

NOT TO SCALE

TYPICAL LIGHTING (SWITCHING) CONTROL

WITH VACANCY SENSOR, AND SWITCH INPUT

CEILING MOUNT

OCCUPANCY SENSOR

EQUAL TO

WATTSTOPPER

LMDC-100

NORMAL SWITCH LEG

TYPICAL

NORMAL

FIXTURE

NORMAL

LIGHTING

PANEL

NORMAL NEUTRAL

NORMAL HOT

(120/277v) White (Neutral In)

Black (120/277v In) Red (Load-A Switched Out)

NORMAL NEUTRAL

Violet (Load-A Dim) Gray (Load-A Dim)

CAP

NOT TO SCALE

ELECTRICAL PULLBOX DETAIL

24 1/2"

22 1/4"

BOX

33 7/8"

35 5/8"

37 5/8"

COVER

26"

ELECTRIC

24"

SECTION

2"

21"

3"

CONCRETE RING

AROUND BOX

CHAMFER EDGES

3/8-16 UNC STAINLESS

STEEL HEX HEAD BOLT

W/WASHER (2)

SKID RESISTANT

SURFACE

1/2" x 4"

PULL SLOT

4" x 4" MOUSEHOLES

(2) PG2436BB

COVER RATED AT 5,000 PSI

OVER 10"x10" AREA. LABEL

"ELECTRIC".

6 TO 8 INCHES

GRAVEL

COMPACTED EARTH

PLASTIC BUSHING ON

EACH CONDUIT END

DISCONNECT SWITCH

DESCRIPTION NOMENCLATURE

XX/X/XX

SHADED SECTION

INDICATES LIGHTED

FACE OF EXIT SIGN

ARROWS INDICATE

DIRECTION OF ARROWS

ON EXIT SIGN

NOT TO SCALE

EXIT SIGN NOMENCLATURE

AMPERE RATING NEMA RATING

NUMBER OF POLES

Job No.Christopher A. Garick; FL. PE No.53924 Thomas A. Alexander; FL. PE No.73172 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

23004

4/4/2023

DRAWING NUMBER:

DATE: FILE:

SHEET TITLE:

APPROVED BY:

REVISIONS:

21014

St ok es A rc hi te ct ur al

, I nc

St ok es A rc hi te ct ur al

, i nc

. h er eb y ex pr es sl y re se rv es it s co m m on -la w c op yr ig ht a nd o th er p ro pe rty ri gh ts to th es e pl an s.

D ra w in gs a re n ot to b e re pr od uc ed

, c ha ng ed

, o r c op ie d in a ny fo rm w ha ts oe ve r, no r a re th ey to b e as si gn ed to a ny th ird p ar ty w ith ou t f irs t o bt ai ni ng th e ex pr es s w rit te n pe rm is si on a nd c on se nt o f S to ke s

Ar ch ite ct ur al

, i nc

DRAWN BY:

R.E.

CHECKED BY:

C.P.

Ar ch ite ct te r P la nn rio r D es ig n

C lo ve rd al e

Bo ul ev ar d Fo rt W al to n Be ac h, F lo rid a

Ph on e:

(8

) 6

-2

0)

-6

FL

L ic en se

: A

R

C or p

Li ce ns e

A

AC

Architectural Inc.

Stokes

M ir a m a r

B ea ch

Fl o ri d a

Drift woo d Tr ansi t Sto p &

Rest room

- W alto n Co unty

D ri ft w o o d R o a d

PROFESSIONAL SEAL:

AR009663009-19-2018

E3.1

ELECTRICAL DETAILS

PANEL

NEW

P 120/240V

1PH, 3W

350A M.C.B.

NTS

SINGLE LINE POWER RISER

KEYNOTES

2 RUNS OF 2" CONDUIT

WITH 3 #2/0 IN EACH

INSTALL SURGE

SUPPRESSOR WITH 4 #6,

#10 GND IN 1" C. LEAD

LENGTH NOT TO EXCEED

14 INCHES PER ANSI/UL

1449-2016 4TH EDITION.

REFER TO GROUNDING

DETAILS

CT CABINET

240/120V GROUNDING SYSTEM DIAGRAM

NEUTRALGROUND

NOT TO SCALE

FINISHED FLOOR

NOT TO SCALE

T E

L E

B A

C K

B O

A R

D

4"

INSULATED GROUNDING BAR DETAIL

.25" 2"

NOT TO SCALE

4"

MAIN GROUNDING

ELECTRODE

GROUND BAR

METAL WATER PIPE WITHIN

5 FT OF ENTRANCE

240/120 VOLT

SERVICE ENTRANCE

EQUIPMENT

KEYNOTES

MAIN GROUNDING

ELECTRODE

GROUND BAR

TYPICAL - EACH CABLE:

LABEL WITH TYPE GROUND

I.E. "TELE BACKBOARD",

"COLD WATER GROUND",

4" HIGH CONCRETE CURB

AROUND CONDUITS

10"L (COPPER)

7/16" DIA.

3/8" DIA.

GROUND BAR NOTES:

1 INSTALL ONE BAR AT EACH COMMUNICATIONS ROOM.

3 CONNECT BARS WITH 1#6 BARE CU IN 1" CONDUIT.

GENERAL NOTES

1 BOND HOT AND COLD WATER PIPING SYSTEMS.

2 CONDUCTOR SIZES SHOWN ARE MINIMUM AND MAY BE LARGER

THAN THE MINIMUM SIZES REQUIRED BY NEC.

3 INSTALL GROUNDING CONNECTIONS TO BUILDING STRUCTURE

AND WATER PIPES AT LOCATIONS THAT ARE VISIBLE AND

ACCESSIBLE FOR INSPECTION, MAINTENANCE, AND TESTING.

4 INSTALL AN INSULATED THROAT GROUNDING BUSHING ON EACH

METALLIC SERVICE ENTRANCE CONDUIT. BOND TO GROUND BUS

USING CONDUCTOR THAT IS SIZED BASED ON NEC TABLE 250-66

USING THE SERVICE PHASE CONDUCTOR SIZE.

5 INSTALL AN INSULATED THROAT GROUNDING BUSHING ON EACH

METALLIC FEEDER CONDUIT. BOND TO GROUND BUS USING

CONDUCTOR THAT IS SIZED BASED ON NEC TABLE 250-122

USING THE FEEDER CIRCUIT OVERCURRENT DEVICE SIZE OR THE

SEPARATELY DERIVED SYSTEM OVERCURRENT DEVICE SIZE.

GROUNDING SYSTEM

TYPICAL ENCLOSURE

TYPICAL ENCLOSURE: EQUAL TO CARLON 'CIRCUIT-SAFE' JIC

ENCLOSURE: NON-METALLIC; SIDE OPENING, HINGED DOOR WITH

LOCK OR CATCH; POLYCARBONATE CONSTRUCTION. PROVIDE

A MICARTA PLATE, MECHANICALLY ATTACHED TO OUTSIDE

OF DOOR, ENGRAVED IN LETTERS 1" HIGH TO READ

"MAIN GROUND BUS BAR". SIZE ENCLOSURE TO ENSURE

A MINIMUM OF 2" CLEARANCE AT EACH END OF THE

GROUND BAR

7'-6"

MIN.

7'-6"

MIN.

NO DESCRIPTION

GROUND BAR

WALL MTG. BRACKET

INSULATORS

5/8"X1" H.H.C.S. BOLT

5/8" LOCKWASHER

ROUTE 1 #4 BARE CU IN 1" CONDUIT FROM GROUND BAR TO

BUILDING ELECTRICAL SERVICE ENTRANCE GROUND.

INSTALL GROUNDING ELECTRODE CONDUCTOR, TABLE 250-66 USING THE SERVICE PHASE

CONDUCTOR SIZE, BUT NOT SMALLER THAN NO 4.

10 FOOT MINIMUM X 3/4" DIAMETER COPPER CLAD STEEL SECTIONAL DRIVEN GROUND ROD.

INSTALL BONDING JUMPER WIRE THAT IS SIZED BASED ON NEC TABLE 250-66 OR 250.28(D)(1)

USING THE SERVICE OR SEPARATELY-DERIVED SYSTEM PHASE.

INSTALL A "MAIN GROUND ELECTRODE GROUND BAR" FOR SINGLE POINT GROUNDING.

LOCATE AT AN ACCESSIBLE POINT NEAR THE SERVICE ENTRANCE EQUIPMENT. MAKE

CONNECTIONS TO THE GROUND ELECTRODE CONDUCTOR USING IRREVERSIBLE

CONNECTORS OR EXOTHERMIC WELDS. MAKE OTHER CONNECTIONS TO THE GROUND BAR

USING TWO-HOLE COMPRESSION SPADE LUGS THAT MEET IEEE 837 REQUIREMENTS. LABEL

EACH CONNECTION TO THE GROUND BAR.

NEW UTILITY

PROVIDED

TERMINAL

CABINETFINISH GRADE

UTILITY PROVIDED

WEATHERHEAD AND

SERVICE DROP UTILITY ELECTRIC METER

Job No.Christopher A. Garick; FL. PE No.53924 Thomas A. Alexander; FL. PE No.73172 Daniel J. White; FL. PE No.73790 Caleb W. Leonard; FL. PE No.91782

HG Engineers 142 Eglin Parkway SE Fort Walton Beach, Florida, 32548 E-mail: office@hgengineers.com Ph: 850.243.6723 Fl. Authorization No.00006680

23004

4/4/2023

DRAWING NUMBER:

DATE: FILE:

SHEET TITLE:

APPROVED BY:

REVISIONS:

21014

St ok es A rc hi te ct ur al

, I nc

St ok es A rc hi te ct ur al

, i nc

. h er eb y ex pr es sl y re se rv es it s co m m on -la w c op yr ig ht a nd o th er p ro pe rty ri gh ts to th es e pl an s.

D ra w in gs a re n ot to b e re pr od uc ed

, c ha ng ed

, o r c op ie d in a ny fo rm w ha ts oe ve r, no r a re th ey to b e as si gn ed to a ny th ird p ar ty w ith ou t f irs t o bt ai ni ng th e ex pr es s w rit te n pe rm is si on a nd c on se nt o f S to ke s

Ar ch ite ct ur al

, i nc

DRAWN BY:

R.E.

CHECKED BY:

C.P.

Ar ch ite ct te r P la nn rio r D es ig n

C lo ve rd al e

Bo ul ev ar d Fo rt W al to n Be ac h, F lo rid a

Ph on e:

(8

) 6

-2

0)

-6

FL

L ic en se

: A

R

C or p

Li ce ns e

A

AC

Architectural Inc.

Stokes

M ir a m a r

B ea ch

Fl o ri d a

Drift woo d Tr ansi t Sto p &

Rest room

- W alto n Co unty

D ri ft w o o d R o a d

PROFESSIONAL SEAL:

AR009663009-19-2018

E3.2

POWER RISER AND

GROUNDING DETAILS

http://www.Humber-Garick.com http://www.Humber-Garick.com