lithonia-amber-series-led-area-luminaire-dsx2-area-rectangular.pdf

One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com

© 2011-2023 Acuity Brands Lighting, Inc. All rights reserved.

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

D-Series Size 2 Amber Series LED Area Luminaire

Specifications

Catalog

Number

Notes

Type

Introduction The modern styling of the D-Series features a highly refined aesthetic that blends seamlessly with its environment. The D-Series offers the benefits of the latest in Amber LED technology into a high performance, high efficacy, long-life luminaire.

The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density. D-Series outstanding photometry aids in reducing the number of poles required in area lighting applications.

EPA: 1.06 ft2

(0.10 m2)

Length: 40.59" (103.1 cm)

Width: 16.76" (42.6 cm)

Height H1: 8.11" (20.6 cm)

Height H2: 3.96" (10.1 cm)

Weight: 46 lbs (20.9 kg)

Hit the Tab key or mouse over the page to see all interactive elements.

Ordering Information EXAMPLE: DSX2 LED P6 AMBPC AMCRI T3M MVOLT SPA NLTAIR2 PIRHN DDBXD

DSX2 LED

Series LEDs Color temperature 2 Color Rendering Index 2 Distribution Voltage Mounting

DSX2 LED Forward optics P1 P5 P2 P6 P3 P4 Rotated optics P10 1

P11 1

P12 1

AMBLW Limited wavelength amber

AMBPC Phosphor converted amber

AMCRI AFR Automotive front row T1S Type I short T2M Type II medium T3M Type III medium T3LG Type III low glare 3

T4M Type IV medium T4LG Type IV low glare 3

TFTM Forward throw medium

T5M Type V medium

T5LG Type V low glare

T5W Type V wide

BLC3 Type III backlight control 3

BLC4 Type IV backlight control 3

LCCO Left corner cutoff 3

RCCO Right corner cutoff 3

MVOLT (120V-277V) 4

HVOLT (347V-480V) 5,6

XVOLT (277V - 480V) 7,8

Shipped included SPA Square pole mounting

(#8 drilling) RPA Round pole mounting

(#8 drilling)

SPA5 Square pole mounting #5 drilling 9

RPA5 Round pole mounting #5 drilling 9

SPA8N Square narrow pole mounting #8 drilling

WBA Wall bracket 10

MA Mast arm adapter (mounts on 2 3/8" OD horizontal tenon)

Control options Other options Finish (required)

Shipped installed NLTAIR2 PIRHN nLight AIR gen 2 enabled with bi-level motion / ambient senso, 8-40’ mounting height, ambient sensor enabled at 2fc. 11, 12, 20, 21

PIR High/low, motion/ambient sensor, 8-40’ mounting height, ambient sensor enabled at 2fc 13, 20, 21

PER NEMA twist-lock receptacle only (controls ordered separate) 14

PER5 Five-pin receptacle only (controls ordered separate) 14, 21

PER7 Seven-pin receptacle only (controls ordered separate) 14, 21

FAO Field adjustable output 15, 21

BL30 Bi-level switched dimming, 30% 16, 21

BL50 Bi-level switched dimming, 50% 16, 21

DMG 0-10v dimming wires pulled outside fixture (for use with an external control, ordered separately) 17

DS Dual switching 18, 19, 21

Shipped installed SPD20KV 20KV surge protection HS Houseside shield (black finish standard) 22

L90 Left rotated optics 1

R90 Right rotated optics 1

CCE Coastal Construction 23

3G Vibration rated for 3G 24

Shipped separately EGSR External Glare Shield (reversible, field install required, matches housing finish) BSDB Bird Spikes (field install required)

DDBXD Dark Bronze DBLXD Black DNAXD Natural Aluminum DWHXD White DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white

L

H2 H1

W http://www.lithonia.com

TREV8626

Highlight Amber Series

TREV8626

Highlight LED Area Luminaire

TREV8626

Step 2 - OK AMBLW Limited wavelength

TREV8626

Step 2 - OK P4

TREV8626

Step 2 - OK

DSX2 LED

TREV8626

Step 2 - OK T3M Type III medium

TREV8626

Step 2 - OK Forward optics

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

Drilling

Top of Pole

0.563"

2.650"

1.325" 0.400"

(2 PLCS)

Template #8

Tenon O.D. Mounting Single Unit 2 @ 180 2 @ 90 3 @ 90 3 @120 4 @ 90

2-3/8" RPA AS3-5 190 AS3-5 280 AS3-5 290 AS3-5 390 AS3-5 320 AS3-5 490

2-7/8" RPA AST25-190 AST25-280 AST25-290 AST25-390 AST25-320 AST25-490

4" RPA AST35-190 AST35-280 AST35-290 AST35-390 AST35-320 AST35-490

Tenon Mounting Slipfitter

Ordering Information

NOTES

1 Rotated optics available with packages P10, P11 and P12. Must be combined with option L90 or R90.

2 AMBLW only available in package P1, P4, and P10. AMCRI must be specified with AMBLW or AMBPC.

3 T3LG, T4LG, BLC3, BLC4, LCCO, RCCO not available with option HS.

4 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz).

5 HVOLT driver operates on any line voltage from 347-480V (50/60 Hz).

6 HVOLT not available with package P10 when combined with option NLTAIR2 PIRHN or option PIR.

7 XVOLT operates with any voltage between 277V and 480V (50/60 Hz).

8 XVOLT not available in package P10.

9 SPA5 and RPA5 for use with #5 drilling only (Not for use with #8 drilling).

10 WBA cannot be combined with Type 5 distributions plus photocell (PER).

11 NLTAIR2 and PIRHN must be ordered together. For more information on nLight AIR2 visit this link 12 NLTAIR2 PIRHN not available with other controls including PIR, PER, PER5, PER7, FAO, BL30, BL50, DMG and DS. NLTAIR2 PIRHN not available with P10 using HVOLT. NLTAIR2 PIRHN not available with P10 using XVOLT.

13 PIR not available with NLTAIR2 PIRHN, PER, PER5, PER7, FAO BL30, BL50, DMG and DS. PIR not available with P10 using HVOLT. PIR not available with

P10 using XVOLT.

14 PER/PER5/PER7 not available with NLTAIR2 PIRHN, PIR, BL30, BL50, FAO, DMG and DS. Photocell ordered and shipped as a separate line item from Acuity

Brands Controls. See accessories. Shorting Cap included.

15 FAO not available with other dimming control options NLTAIR2 PIRHN, PIR, PER5, PER7, BL30, BL50, DMG and DS.

16 BL30 and BL50 are not available with NLTAIR2 PIRHN, PIR, PER, PER5, PER7, FAO, DMG and DS.

17 DMG not available with NLTAIR2 PIRHN, PIR, PER, PER5, PER7, BL30, BL50, FAO and DS.

18 DS not available with NLTAIR2 PIRHN, PIR, PER, PER5, PER7, BL30, BL50, FAO and DMG.

19 DS requires (2) separately switched circuits. DS provides 50/50 fixture operation via (2) different sets of leads on P1, P2, P3, P4, P5 (2 drivers). Note:

Provides 60/40 operation using (2) different sets of leads on P6, P10, P11, P12 (3 drivers).

20 Reference Motion Sensor Default Settings table on page 4 to see functionality.

21 Reference Controls Options table on page 4.

22 HS not available with T3LG, T4LG, BLC3, BLC4, LCCO and RCCO distribution. Also available as a separate accessory; see Accessories information.

23 CCE option not available with option BSDB and EGSR. Contact Technical Support for availability.

24 Option 3G for use with (MA) mast arm mount only when 3G vibration is required.

25 Requires luminaire to be specified with PER, PER5 or PER7 option. See Controls Table on page 4.

HANDHOLE ORIENTATION

A Handhole

B

C

D

Fixture Quantity & Mounting Configuration Single DM19 2 @ 180 DM28 2 @ 90 DM29 3 @ 90 DM39 3 @ 120 DM32 4 @ 90 DM49

Mounting Type

DSX2 with SPA 1.06 2.12 1.84 2.32 --- 2.33

DSX2 with SPA5, SPA8N 1.07 2.14 1.90 2.43 --- 2.44

DSX2 with RPA, RPA5 1.07 2.14 1.90 2.43 2.31 2.44

DSX2 with MA 1.20 2.40 2.12 3.00 2.92 3.00

DSX2 Area Luminaire - EPA *Includes luminaire and integral mounting arm. Other tenons, arms, brackets or other accessories are not included in this EPA data.

Accessories Ordered and shipped separately.

DLL127F 1.5 JU Photocell - SSL twist-lock (120-277V) 25

DLL347F 1.5 CUL JU Photocell - SSL twist-lock (347V) 25

DLL480F 1.5 CUL JU Photocell - SSL twist-lock (480V) 25

DSHORT SBK Shorting cap 25

DSX2HS P# House-side shield (enter package number 1-12 in place of #)

DSXRPA (FINISH) Round pole adapter (#8 drilling, specify finish)

DSXSPA5 (FINISH) Square pole adapter #5 drilling (specify finish)

DSXRPA5 (FINISH) Round pole adapter #5 drilling (specify finish)

DSX2EGSR (FINISH) External glare shield (specify finish)

DSX2BSDB (FINISH) Bird spike deterrent bracket (specify finish)

Shield Accessories

External Glare Shield (EGSR) House Side Shield (HS)

Minimum Acceptable Outside Pole Dimension

SPA #8 3.5" 3.5" 3.5" 3.5" 3.5"

RPA #8 3" 3" 3" 3" 3" 3"

SPA5 #5 3" 3" 3" 3" 3"

RPA5 #5 3" 3" 3" 3" 3" 3"

SPA8N #8 3" 3" 3" 3" 3"

Mounting Option Drilling Template Single 2 @ 180 2 @ 90 3 @ 90 3 @ 120 4 @ 90

Head Location Side B Side B & D Side B & C Side B, C & D Round Pole Only Side A, B, C & D

Drill Nomenclature #8 DM19AS DM28AS DM29AS DM39AS DM32AS DM49AS http://www.lithonia.com http://www.acuitybrandslighting.com/library/LL/documents/SpecSheets/TD-drill-8.pdf https://www.acuitybrands.com/products/controls/nlightair

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

To see complete photometric reports or download .ies files for this product, visit Lithonia Lighting’s homepage. Photometric Diagrams

Isofootcandle plots for the DSX2 LED P6 AMBPC AMCRI. Distances are in units of mounting height (25’).

LEGEND

0.1 fc

0.5 fc

1.0 fc

-4

-3

-2

-1

4 3 2 1 0 4321

T1S

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5 T2M

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5 T3M

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

T3LG

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

T4M TFTM T4LG T5M

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

T5W T5LG AFR BLC3

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

4 3 2 1 0 43215 5

-4

-3

-2

-1

-5

BLC4 LCCO RCCO

http://www.lithonia.com https://www.acuitybrands.com/products/detail/209327/lithonia-lighting/d-series-area-size-2/dsx2-led-area-luminaire

TREV8626

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

Photometric Diagrams

AMBPC - Phosphor Converted Amber

AMBLW - True Limited Wavelength Amber http://www.lithonia.com

TREV8626

AMBLW - True Limited Wavelength Amber

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

Performance Data

Motion Sensor Default Settings Option Unoccupied Dimmed Level High Level

(when occupied) Phototcell Operation Dwell Time Ramp-up Time Dimming Fade Rate

PIR 30% 100% Enabled @ 2FC 7.5 min 3 sec 5 min

PIRHN 30% 100% Enabled @ 2FC 7.5 min 3 sec 5 min

Controls Options Nomenclature Description Functionality Primary control device Notes

FAO Field adjustable output device installed inside the luminaire; wired to the driver dimming leads.

Allows the luminaire to be manually dimmed, effectively trimming the light output.

FAO device Cannot be used with other controls options that need the 0-10V leads

DS (not available on DSX0) Drivers wired independently for 50/50 luminaire operation

The luminaire is wired to two separate circuits, allowing for 50/50 operation.

Independently wired drivers Requires two separately switched circuits. Consider nLight AIR as a more cost effective alternative.

PER5 or PER7 Twist-lock photocell receptacle Compatible with standard twist-lock photocells for dusk to dawn operation, or advanced control nodes that provide 0-10V dimming signals.

Twist-lock photocells such as DLL Elite or advanced control nodes such as ROAM.

Pins 4 & 5 to dimming leads on driver, Pins 6 & 7 are capped inside luminaire. Cannot be used with other controls options that need the 0-10V leads.

PIR Motion sensor with integral photocell. Sensor suitable for 8’ to 40’ mounting height.

Luminaires dim when no occupancy is detected. Acuity Controls rSBG Cannot be used with other controls options that need the 0-10V leads.

NLTAIR2 PIRHN nLight AIR enabled luminaire for motion sensing, photocell and wireless communication.

Motion and ambient light sensing with group response. Scheduled dimming with motion sensor over-ride when wirelessly connected to the nLight Eclypse.

nLight Air rSBG nLight AIR sensors can be programmed and commissioned from the ground using the ClAIRity Pro app. Cannot be used with other controls options that need the 0-10V leads.

BL30 or BL50 Integrated bi-level device that allows a second control circuit to switch all light engines to either 30% or 50% light output

BLC device provides input to 0-10V dimming leads on all drivers providing either 100% or dimmed (30% or 50%) control by a secondary circuit

BLC UVOLT1 BLC device is powered off the 0-10V dimming leads, thus can be used with any input voltage from 120 to 480V

*Note: Calculated values are based on original performance package data. When calculating new values for given FAO position, use published values for each package based on input watts and lumens by optic type.

FAO Position % Wattage % Lumen Output

8 100% 100% 7 93% 95% 6 80% 85% 5 66% 73% 4 54% 61% 3 41% 49% 2 29% 36% 1 15% 20%

FAO Dimming Settings

Current (A)

Peformance Package LED Count Drive Current

(mA) Wattage 120V 208V 240V 277V 347V 480V

Forward Optics (Non-Rotated)

P1 80 530 138 1.15 0.66 0.57 0.50 0.40 0.29

P2 80 700 184 1.53 0.88 0.76 0.66 0.53 0.38

P3 80 1050 281 2.35 1.35 1.17 1.02 0.81 0.59

P4 100 530 173 1.44 0.83 0.72 0.62 0.50 0.36

P5 100 700 230 1.91 1.10 0.96 0.83 0.66 0.48

P6 100 1050 350 2.91 1.68 1.46 1.26 1.01 0.73

Rotated Optics (Requires L90 or R90)

P10 90 530 155 1.29 0.75 0.65 0.56 0.45 0.32

P11 90 700 207 1.73 1.00 0.86 0.75 0.60 0.43

P12 90 1050 315 2.62 1.51 1.31 1.14 0.91 0.66

Electrical Load - AMBPC (Phospher Converted Amber)

Current (A)

Peformance Package LED Count Drive Current

(mA) Wattage 120V 208V 240V 277V 347V 480V

Forward Optics (Non-Rotated)

P1 80 530 109 0.91 0.52 0.45 0.39 0.31 0.23

P4 100 530 138 1.15 0.66 0.58 0.50 0.40 0.29

Rotated Optics (Requires L90 or R90) P10 90 530 123 1.02 0.59 0.51 0.44 0.35 0.26

Electrical Load - AMBLW (Limited Wavelength Amber) http://www.lithonia.com

TREV8626

Step 2 - OK P4 100 530 138 1.15 0.66 0.58 0.50 0.40 0.29

TREV8626

Step 2 - OK (Non-Rotated)

TREV8626

Step 2 - OK Forward Optics (Non-Rotated)

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

Performance Data

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of configurations shown within the tolerances described within LM-79.

Contact factory for performance data on any configurations not shown here.

FORWARD OPTICS

Performance Package LED Count Drive Current (mA) Distribution Type

AMBPC (Phosphor Converted) AMBLW (Limited Wavelength)

System Watts Lumens B U G LPW System Watts Lumens B U G LPW

P1 80 530

T1S

138W

12,308 2 0 2 89

109W

5,535 1 0 1 51

T2M 11,402 2 0 3 83 5,128 1 0 2 47

T3M 11,534 2 0 3 84 5,187 1 0 2 48

T3LG 10,303 2 0 2 75 4,633 1 0 1 43

T4M 11,706 2 0 4 85 5,264 1 0 3 48

T4LG 10,647 1 0 2 77 4,788 1 0 1 44

TFTM 11,787 2 0 3 86 5,301 1 0 2 49

T5M 12,044 4 0 2 87 5,416 3 0 1 50

T5W 12,239 4 0 3 89 5,504 3 0 2 51

T5LG 12,079 3 0 2 88 5,432 2 0 1 50

BLC3 8,390 0 0 2 61 3,773 0 0 1 35

BLC4 8,665 0 0 3 63 3,897 0 0 2 36

RCCO 8,465 1 0 2 61 3,807 0 0 1 35

LCCO 8,465 1 0 2 61 3,807 0 0 1 35

AFR 12,308 2 0 2 89 5,535 1 0 1 51

P2 80 700

T1S

184W

15,466 2 0 2 84

T2M 14,327 2 0 3 78

T3M 14,493 2 0 4 79

T3LG 12,946 2 0 2 71

T4M 14,709 2 0 4 80

T4LG 13,378 2 0 2 73

TFTM 14,811 2 0 4 81

T5M 15,134 4 0 2 82

T5W 15,379 4 0 3 84

T5LG 15,177 3 0 2 83

BLC3 10,542 0 0 2 57

BLC4 10,888 0 0 3 59

RCCO 10,637 1 0 2 58

LCCO 10,637 1 0 2 58

AFR 15,466 2 0 2 84

P3 80 1050

T1S

281W

21,053 2 0 3 75

T2M 19,503 3 0 4 69

T3M 19,729 3 0 5 70

T3LG 17,623 2 0 2 63

T4M 20,023 3 0 5 71

T4LG 18,212 2 0 3 65

TFTM 20,162 3 0 5 72

T5M 20,601 5 0 3 73

T5W 20,935 5 0 3 74

T5LG 20,661 4 0 2 73

BLC3 14,351 0 0 3 51

BLC4 14,822 0 0 4 53

RCCO 14,479 1 0 3 51

LCCO 14,479 1 0 3 51

AFR 21,053 2 0 3 75

Lumen Output http://www.lithonia.com

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

Performance Data

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of configurations shown within the tolerances described within LM-79.

Contact factory for performance data on any configurations not shown here.

FORWARD OPTICS

Performance Package LED Count Drive Current (mA) Distribution Type

AMBPC (Phosphor Converted) AMBLW (Limited Wavelength)

System Watts Lumens B U G LPW System Watts Lumens B U G LPW

P4 100 530

T1S

173W

15,289 2 0 2 88

138W

6,172 1 0 1 44

T2M 14,163 2 0 3 82 5,717 1 0 2 41

T3M 14,327 2 0 4 83 5,784 1 0 3 42

T3LG 12,798 2 0 2 74 5,166 1 0 1 37

T4M 14,541 2 0 4 84 5,870 1 0 3 43

T4LG 13,225 2 0 2 76 5,339 1 0 1 39

TFTM 14,641 2 0 4 85 5,910 1 0 3 43

T5M 14,961 4 0 2 87 6,039 3 0 1 44

T5W 15,203 4 0 3 88 6,137 3 0 2 44

T5LG 15,004 3 0 2 87 6,057 2 0 1 44

BLC3 10,421 0 0 2 60 4,207 0 0 2 30

BLC4 10,763 0 0 3 62 4,345 0 0 2 31

RCCO 10,515 1 0 2 61 4,245 0 0 2 31

LCCO 10,515 1 0 2 61 4,245 0 0 2 31

AFR 15,289 2 0 2 88 6,172 1 0 1 44

P5 100 700

T1S

230W

19,136 2 0 3 135

T2M 17,727 3 0 4 77

T3M 17,933 3 0 4 78

T3LG 16,019 2 0 2 70

T4M 18,200 3 0 5 79

T4LG 16,553 2 0 2 72

TFTM 18,326 3 0 5 80

T5M 18,725 5 0 3 82

T5W 19,029 5 0 3 83

T5LG 18,779 4 0 2 82

BLC3 13,044 0 0 3 57

BLC4 13,472 0 0 4 59

RCCO 13,161 1 0 3 57

LCCO 13,161 1 0 3 57

AFR 19,136 2 0 3 135

P6 100 1050

T1S

350W

25,768 3 0 3 129

T2M 23,871 3 0 5 68

T3M 24,148 3 0 5 69

T3LG 21,570 3 0 3 62

T4M 24,508 3 0 5 70

T4LG 22,290 2 0 3 64

TFTM 24,677 3 0 5 71

T5M 25,215 5 0 3 72

T5W 25,624 5 0 4 73

T5LG 25,288 4 0 2 72

BLC3 17,564 0 0 4 50

BLC4 18,141 0 0 5 52

RCCO 17,722 1 0 4 51

LCCO 17,722 1 0 4 51

AFR 25,768 3 0 3 129

Lumen Output http://www.lithonia.com

TREV8626

Step 2 - OK

TREV8626

Step 2 - OK T3M

TREV8626

Step 2 - OK AMBLW (Limited Wavelength)

TREV8626

Step 2 - OK 138W

TREV8626

5,784 1 0 3 42

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

Performance Data

Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of configurations shown within the tolerances described within LM-79.

Contact factory for performance data on any configurations not shown here.

ROTATED OPTICS

Performance Package LED Count Drive Current (mA) Distribution Type

AMBPC (Phosphor Converted) AMBLW (Limited Wavelength)

System Watts Lumens B U G LPW System Watts Lumens B U G LPW

P10 90 530

T1S

155W

14,085 3 0 3 91

123W

5,478 2 0 2 45

T2M 13,048 4 0 4 84 5,075 3 0 3 41

T3M 13,197 4 0 4 85 5,133 3 0 3 42

T3LG 11,791 3 0 3 76 4,586 2 0 2 37

T4M 13,394 4 0 4 86 5,209 3 0 3 42

T4LG 12,182 3 0 3 79 4,738 2 0 2 39

TFTM 13,489 4 0 4 87 5,246 3 0 3 43

T5M 13,781 4 0 2 89 5,360 3 0 1 44

T5W 14,004 4 0 3 90 5,446 3 0 2 44

T5LG 13,821 3 0 2 89 5,375 2 0 1 44

BLC3 9,600 3 0 3 62 3,734 2 0 2 30

BLC4 9,914 4 0 4 64 3,856 3 0 3 31

RCCO 9,686 1 0 2 62 3,767 0 0 1 31

LCCO 9,688 4 0 4 62 3,768 3 0 3 31

AFR 14,085 3 0 3 91 5,478 2 0 2 45

P11 90 700

T1S

207W

17,656 4 0 4 85

T2M 16,356 4 0 4 79

T3M 16,543 4 0 4 80

T3LG 14,780 3 0 3 71

T4M 16,790 4 0 4 81

T4LG 15,270 3 0 3 74

TFTM 16,909 4 0 4 82

T5M 17,275 4 0 2 83

T5W 17,555 5 0 3 85

T5LG 17,325 4 0 2 84

BLC3 12,034 4 0 4 58

BLC4 12,428 4 0 4 60

RCCO 12,142 1 0 3 59

LCCO 12,144 5 0 5 59

AFR 17,656 4 0 4 85

P12 90 1050

T1S

315W

23,661 4 0 4 75

T2M 21,919 5 0 5 70

T3M 22,170 5 0 5 70

T3LG 19,807 4 0 4 63

T4M 22,500 5 0 5 71

T4LG 20,464 4 0 4 65

TFTM 22,659 5 0 5 72

T5M 23,150 5 0 3 74

T5W 23,525 5 0 4 75

T5LG 23,217 4 0 2 74

BLC3 16,127 4 0 4 51

BLC4 16,655 4 0 4 53

RCCO 16,271 1 0 3 52

LCCO 16,274 5 0 5 52

AFR 23,661 4 0 4 75

Lumen Output

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

42.11"

3.96"

16.76"

8.44"

42.41"

3.96"

16.75"

8.90"

46.59"

3.96"

16.76"

8.23"

Dimensions

DSX2 with RPA, RPA5, SPA5, SPA8N mount Weight: 48 lbs

DSX2 with WBA mount Weight: 50 lbs

DSX2 with MA mount Weight: 50 lbs

2.41"

3.16"

SPA (STANDARD ARM)

2.41" 3.16"

RPA

2.41"

3.16"

SPA8N

4.25"

RPA5

4.25"

SPA5

DSX2-LED AMBER

Rev. 06/29/23

COMMERCIAL OUTDOOR

FEATURES & SPECIFICATIONS

INTENDED USE

The sleek design of the D-Series Area Size 2 reflects the embedded high performance LED technology. It is ideal for applications like car dealerships and large parking lots adjacent to malls, transit stations, grocery stores, home centers, and other big-box retailers.

CONSTRUCTION

Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life. Housing driver compartment is completely sealed against moisture and environmental contaminants (IP66). Vibration rated per ANSI C136.31 for 1.5G. 3G vibration rated available for (MA) mast arm mount when specifying option 3G. Low EPA (1.06 ft2) for optimized pole wind loading.

FINISH

Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes.

Coastal Construction (CCE) Optional corrosion resistant construction is engineered with added corrosion protection in materials and/or pre-treatment of base material under super durable paint. Provides additional corrosion protection for applications near coastal areas.

Finish is salt spray tested to over 5,000 hours per ASTM B117 with scribe rating of

10. Additional lead-times may apply.

OPTICS

Precision-molded proprietary silicone lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. The D-Series Size 2 has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight.

ELECTRICAL

Light engine configurations consist of amber LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life. Class 1 electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 100,000 hours with <1% failure rate. Easily-serviceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).

INSTALLATION

Integral mounting arm allows for fast mounting using Lithonia standard #8 drilling and accommodates pole drilling’s from 2.41 to 3.12" on center. The standard “SPA” option for square poles and the “RPA” option for round poles use the #8 drilling. For #5 pole drillings, use SPA5 or RPA5. Additional mountings are available including a wall bracket (WBA) and mast arm (MA) option that allows luminaire attachment to a 2 3/8" horizontal mast arm.

STANDARD CONTROLS

The DSX2 LED area luminaire has a number of control options. DSX Size 2, comes standard with 0-10V dimming drivers. Dusk to dawn controls can be utilized via optional NEMA twist-lock photocell receptacles. Integrated motion sensor with on-board photocells feature field-adjustable programing and are suitable for mounting heights up to 40 feet. Control option BL features a bi-level device that allows a second control circuit to switch all light engines to either 30% or 50% light output.

nLIGHT AIR CONTROLS The DSX2 LED area luminaire is also available with nLight® AIR for the ultimate in wireless control. This powerful controls platform provides out-of-the-box basic motion sensing and photocontrol functionality and is suitable for mounting heights up to 40 feet. Once commissioned using a smartphone and the easy-to-use CLAIRITY app, nLight AIR equipped luminaries can be grouped, resulting in motion sensor and photocell group response without the need for additional equipment.

Scheduled dimming with motion sensor over-ride can be achieved when used with the nLight Eclypse. Additional information about nLight Air can be found here.

LISTINGS

UL listed to meet U.S. and Canadian standards. UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP66 rated. Rated for -40°C minimum ambient.

WARRANTY

5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

nLight Control - Sensor Coverage and Settings nLight Sensor Coverage Pattern

NLTAIR2 PIRHN

Top Side http://www.lithonia.com https://www.acuitybrands.com/products/controls/nlightair http://www.acuitybrands.com/support/warranty/terms-and-conditions