B08_Attachment_4_-_DDE_Drawings_20030-20_and_20030-30.pdf
PDF 981 KB Posted
- Attached to
- SAFR HERCULES HAUL OUT
- Solicitation number
- 140P8622Q0058
About this file
This request for quote solicits proposals for hauling out the historic steam tug Hercules for structural rehabilitation and repairs. The National Park Service seeks a contractor to remove the vessel from the water, transport it to a suitable facility, and perform necessary work in accordance with provided specifications, drawings and a scope of work. Proposals are due by August 8th, 2022.
The solicitation includes attachments outlining prior inspection reports, structural assessments, drawings of fuel tank installations and other vessel components. The scope of work entails hauling the vessel out of the water, blocking, and conducting repairs to the hull, machinery and other systems. Evaluation criteria encompass offerors' technical approach, relevant experience on historic vessel restoration projects, past performance references, personnel qualifications, and price. The contract will be a firm fixed price award determined based on best value.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 4
DDE Drawings 20030-20 and 20030-30
21" TYPICAL
DRAIN BELOW
SUPPLY
DEBRIS SUMP AND
NOTE: PORT SWASH BULKHEAD NOT SHOWN FOR CLARITY
ISOMETRIC
TYP OF 4
3/4"-UNC x 48"
STRAPPING BAR
ALL-THREAD
VENT
RETURN
FRAME 36 - AFT ENGINE ROOM BULKHEAD
FILL
CENTERLINE WT BULKHEAD
SWASH BULKHEAD - 6FT OFF CENTERLINE TO STRBD
SIGHT GLASS
LOOKING AFT FROM BKHD 36
HEIGHT OF TANKS TO BE VERIFIED
IN FIELD (V.I.F.) PRIOR TO FABRICATION
~16"
V.I.F.
PLAN VIEW
BKHD 36
AA
SECTION A-A BKHD 36
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
THIS DRAWING PACKAGE DESCRIBES THE FABRICATION AND1.
INSTALLATION OF TWIN DIESEL FUEL OIL TANKS WITHIN
THE EXISTING HEAVY FUEL OIL COMPARTMENT.
FABRICATE 2 TANKS.2.
FABRICATE 2 FOUNDATIONS, ONE OPPOSITE HAND.3.
BULKHEAD PENETRATIONS AND OTHER DETAILS PERTAINING4.
TO THE ENTIRE PROJECT CAN BE FOUND ON DDE
DRAWING 20030-30.
TANK ELEVATION AND FOUNDATION DRAWINGS ARE5.
SUBJECT TO SHIP CHECK VERIFICATION AND CAN CHANGE.
VENT AND FILL PIPING TO BE DETERMINED BASED ON SHIP6.
CHECK.
SUPPLY AND RETURN PIPING SCHEMATIC AND 7.
ARRANGEMENT SHOWN ON DDE DRAWING 20030-30
WELDING IS 3/16 FILLET AROUND U.O.N.8.
WELDING PER AWS D1.19.
WELDING ELECTRODES E71T-X OR BETTER10.
TANKS MUST BE FABRICATED IN-PLACE TO AVOID LARGE11.
ACCESS CUTS
CARE MUST BE TAKEN WHEN WELDING TO SHIPS HULL TO12.
PREVENT DISTORTION AND LEAKAGE THROUGH RIVETS
FOUNDATIONS TO BE WELDED ONLY TO FLANGES OR13.
STIFFENERS, NOT PLATING.
TANK LEVEL INDICATORS PER KRAFT INDUSTRIAL SUPPLY14.
20030-20
Dees Design and Engineering, LLC
DRAWING IS THE SOLE PROPERTY OF
B.DEES
THE INFORMATION CONTAINED IN THIS
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF DDE, LLC IS
www.deesdesignengineering.com 510-691-2009
F.O. TANK ASSEMBLY0.005
DDE, LLC. ANY REPRODUCTION IN PART
D
D
C
PROHIBITED.
PROPRIETARY AND CONFIDENTIALTOLERANCING PER: ANSI Y14.5
MATERIAL
FINISH
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME
TITLE:
REV
D
DWG. NO.
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:32
B.DEES
SIZE
WEIGHT:
B.DEES
01/26/21
01/26/21
SHEET 1 OF 5
01/26/21
NPS TUG HERCULES
DO NOT SCALE DRAWING
AND DETAILS
GENERAL NOTES
A A
B B
C
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/16"
ANGLE: MACH 0.05 BEND 0.5
TWO PLACE DECIMAL 0.010
THREE PLACE DECIMAL
INTERPRET GEOMETRIC
1 Attachment 4
Page 1 of 6 DDE Drawings 20030-20 and 20030-30
SHEET 2 OF 5SCALE: 1:12 WEIGHT:
REVDWG. NO.
D
SIZE
20030-20
A A
B B
C C
D D
ITEM
NO. QTY. NAME DESCRIPTION LENGTH
1 1 FACE-AFT PL 3/16" x 29-5/8" 47-5/8"
2 1 FACE-FRONT PL 3/16" x 29-5/8" 47-5/8"
3 2 SIDE PL 3/16" x 47-5/8" 71-5/8"
4 1 BAFFLE PL 3/16" x 29-5/8" 47-5/8"
5 1 BOTTOM PL 3/16" x 47-5/8" 71-5/8"
6 1 TOP PL 3/16" x 29-5/8" 71-5/8"
7 1 SUMP PIPE-4" SCHED 40 3"
8 1 DOUBLER-SUMP PL 3/16" x 4-9/16" ID 7-9/16" OD
9 1 CAP-SUMP PL 3/16" x 2.375" ID 4" OD
10 2 STIFFENER-SIDE L3x3x3/16" 71 5/8"
11 2 STIFFENER-END L3x3x3/16" 29 5/8"
12 1 DOUBLER-MANHOLE PL 3/16" x 22" 28"
13 14 STUDS-MANHOLE 1/2" UNC SS STUD 1-3/4"
14 1 COVER-MANHOLE PL 3/16" x 22" 28"
15 3 DOUBLER-SUPPLY-RETURN-VENT PL 3/16" x 1.375" ID 3" OD
16 2 PIPE-SUPPLY-VENT PIPE 1" SCHED 40 5"
17 1 PIPE-RETURN PIPE - 1" SCHED 40 ~45"
18 1 DOUBLER-FILL PL 3/16" x 3-9/16" ID 6" OD
19 1 PIPE-FILL PIPE 3" SCHED 40 46"
20 1 NIPPLE-DRAIN 2" NPT NIPPLE 2"
21 1 CAP-DRAIN 2" FPT CAP
22 2 DOUBLER-GLASS PL 3/16"x 1-1/8" ID 2-1/2" OD
23 2 COUPLING COUPLING 1/2" FPT 1"
DIESEL FUEL OIL TANK CUTLIST
BOTTOM VIEW
30"
72"
8"
8"
4"
SIDE VIEW
4"
48"
4"
CC
B
B
SECTION C-C
3" TYP
35 34 "
3/16
CORNER TO CORNER
WRAP ENDS
TYP INTERIOR
3/16
2 @ 8
WRAP ENDS
SECTION B-B
3/16
TYP-
3/16 2 @ 8
3/16
TYP AT PENS
FORWARD END
& DBLRS3/16
2"
3 3 16 "
TOP VIEW
4"
4"
4"
5"
5"
4"
15"
R11"
ISOMETRIC
15 13
ISOMETRIC
Attachment 4
Page 2 of 6 DDE Drawings 20030-20 and 20030-30
46"
60°
SHEET 3 OF 5SCALE: 1:8 WEIGHT:
REVDWG. NO.
D
SIZE
20030-20
A A
B B
C C
D D
DOUBLER-FILL
6" 3 9 16 "
DOUBLER-SUPPLY-RETURN-VENT
3"1.38
16 "
16 "
16 "
BAFFLE
47 58 "
29 58 "
R8"
R2"
23.81
16"
R 1 2 "
3 1 2 "
3" R 1 2 "
15 1316 "
16 "
CAP-SUMP
4.03 2 38 "
3"
3" 16 "
PIPE-FILL
46"
PIPE-SUPPLY-VENT
5"
1.321.05
STIFFENER-END
29 58 "
45°
PIPE-RETURN
1.321.05
3 1 2 "3.07
STIFFENER-SIDE
71 58 "
45°
STRAPPING BAR
34 1 4 "1 12 "
16 " TYP OF 2
4"
3"
8 "
37 1 4 "
5"
.50
3"
3"
16 "
16 "
16 "
FACE-FRONT
47 58 "
29 58 "
1.38
2"
36"
4"
FACE-AFT
47 58 "
29 58 "
16 "
SIDE
71 58 "
47 58 "
BOTTOM
71 58 "
29 58 "
4 9 16 "
8"
8"
16 "
DOUBLER-MANHOLE
R9"
6"
R11"
TOP
29 58 "
71 58 "
22"
3 1316 "
14 1316 "
R9"
4 1316 "
4 1316 "
3 9 16 "
1.38
DOUBLER-SUMP
7 9 16 "
4 9 16 "
16 "
16 "
16 "
16 "
COVER-MANHOLE
30°
6"
8 " TYP OF 14
Page 3 of 6 DDE Drawings 20030-20 and 20030-30
SHEET 4 OF 5SCALE: 1:12 WEIGHT:
REVDWG. NO.
D
SIZE
20030-20
A A
B B
C C
D D
SIDE LOOKING TO STRBD
63"5 58 "
4"
5"
42"
3"
J
J
TOP VIEW
73 1
4 "
31 14 "
35 1 8 "
16 "
TYP OF 2
4"
23"
63"
ITEM
NO. QTY. DESCRIPTION LENGTH ANGLE1 ANGLE2 NOTES
1 1 L4x3x0.375 31 1/4" 45° 45°
2 2 L4x3x0.375 73 1/4" 45° 45°
3 1 L4x3x0.375 70" 0° 0° VIF
4 1 L4x3x0.375 66" 0° 0° VIF
5 1 L4x3x0.375 37 1/2" 0° 0° VIF
6 1 L4x3x0.375 40" 0° 0° VIF
7 2 L4x3x0.375 3" 0° 0°
8 1 L4x3x0.375 31 1/4" 45° 45°
9 2 L4x3x0.375 42" 0° 0° VIF
10 2 L4x3x0.375 22 5/8" 0° -
11 2 L4x3x0.375 29" 0° 0° VIF
TANK FOUNDATION - STARBOARD
STRBD CUTLIST
END LOOKING AFT
F
F
G
G
1 2
ISOMETRIC VIEW
SECTION G-G
42"
70"
33"
6"
2 "
4"
2 "
5"
BOTTOM VIEW
SECTION F-F
66"
20"
6"
29"
5"
2 "
4"
3"1 2 "
SECTION J-J
6"
20"
37 1 2 "
31 14 "
R2"
42"
29"
3"
4"
3"
3"
4"
Page 4 of 6 DDE Drawings 20030-20 and 20030-30
SHEET 5 OF 5SCALE: 1:12 WEIGHT:
REVDWG. NO.
D
SIZE
20030-20
A A
B B
C C
D D
TOP VIEW
34 34 "
23"
63"
1 12 "
16 "
TYP OF 2
73 1 4 "
31 14 "
4"
4"
3"
ITEM
NO. QTY. DESCRIPTION LENGTH ANGLE1 ANGLE2 NOTES
1 1 L4x3x0.375 31 1/4" 45° 45°
2 2 L4x3x0.375 73 1/4" 45° 45°
3 2 L4x3x0.375 29" 0° 0° VIF
4 2 L4x3x0.375 42" 0° 0° VIF
5 1 L4x3x0.375 70" 0° 0° VIF
6 1 L4x3x0.375 66" 0° 0° VIF
7 1 L4x3x0.375 37 1/2" 0° 0° VIF
8 1 L4x3x0.375 40" 0° 0° VIF
9 2 L4x3x0.375 22 5/8" 0° -
10 2 L4x3x0.375 3" 0° 0°
11 1 L4x3x0.375 31 1/4" 45° 45°
PORT SIDE CUTLIST
TANK FOUNDATION - PORT
VIEW LOOKING TO PORT
42"
PRELIMINARY
H
H
END LOOKING FORWARD
D
D
E
E
BOTTOM VIEW
SECTION E-E
6"
33"
70"
42"
5"
2 "
3"
ISOMETRIC VIEW
SECTION H-H
31 14 "
6"
20"
37 1 2 "
R2" 15 58 "
SECTION D-D
6"
4"
66"
20"
63"
3"
29"
PRELIMINARY
Page 5 of 6 DDE Drawings 20030-20 and 20030-30
Page 6 of 6 DDE Drawings 20030-20 and 20030-30
File details come from the government source that posted it. Updated .