Attch5_AppendixE_Preservation_PackagingMarking_Requirements.pdf

EISS - CLS VI

Contract # FA8577-21-C-0002

Appendix E – Preservation, Packaging, & Marking Requirements

10 Sep 2019

I. GENERAL

The contractor shall be responsible for the preservation, packaging and packing of all items to be delivered under the terms of this contract and IAW AFMC Form 158. Marking of shipments and items shall conform to MIL-STD-129 (current edition).

II. PREPARATION FOR DELIVERY

Preparation for delivery is contained on AFMC Form 158.

III. ELECTROSTATIC MATERIAL

Provisions of MIL-STD-1686 (current revision) will apply when identifying all solid state devices and modules containing diodes, translators, integrated circuits and/or other microelectronic components sensitive to electrostatic forces. All such items will be packaged using electrostatic free barrier materials and will clearly bear “Electrostatic Sensitive Device” labels.

IV. HAZARDOUS MATERIALS

In addition to the transportability criteria identified in this document, all shipments of hazardous materials will also comply with applicable modal packaging and transportation requirements as identified in AFJMAN 24-204/TM 38-250/NAVSUP PUB505/MCO P4030.19/DLAM 4145.3 – Preparing Hazardous Materials for Military Air Shipment, 49 CFR, The International Maritime Dangerous Goods Code, and the United Nation’s Recommendation on the Transportation of Dangerous Goods. Material Safety Data Sheets (MSDS) are required for known hazardous items and applicable items shown in FED-STD- 313 (current edition), Tables I and II. Electronic transmission of the MSDS may be accepted, depending on the receiving agency’s capabilities.

V. SUPPLEMENTAL PACKAGING REQUIREMENTS

The Contractor shall be required to repair or replace all packaging that does not meet the requirements of the contract when a contract of an item is contracted to be reengineered or repaired. This process is part of the Bid for the contract and is mandatory.

VI. ITEM UNIQUE IDENTIFICATION (IUID)

The Contractor shall affix and maintain IUID tags, markings, and labels as required by DFARS 252.274. Markings shall be IAW DFARS 252.211-7003, 252.211-7007, and most current version of MIL-STD-130 and RQ-4 IUID Plan. Items shall be marked or remarked, as required, for accuracy and legibility when they are returned for repair or during modifications. Exclusions are parts deemed Critical Safety Items/Flight Safety Critical Aviation Parts (CSI/FSCAP) (DOD 4140.1-R) as previously determined by the Service Engineering Support Activity (ESA), items not accessed/accessible during repair, items which IUID tag application would adversely impact the part’s form, fit, or function.

EISS - CLS VI

Contract # FA8577-21-C-0002

VII. APPLICABLE GOVERNMENT PACKAGING DOCUMENTS

MIL-STD-2073-1E STANDARD PRACTICE, MILITARY MARKING FOR

SHIPMENT AND STORAGE

MIL-STD-129R STANDARD PRACTICE, MILITARY MARKING FOR

SHIPMENT AND STORAGE

MIL-STD-130N IDENTIFICATION MARKINGS OF U.S. MILITARY

PROPERTY

AFMCI 24-201 AFMC PACKAGING AND MATERIALS HANDLING

POLICIES AND PROCEDURES

Appendix E – Preservation, Packaging, & Marking Requirements