Attachment_F_-_NPS_Motorist-Guide-Fab.pdf

Standard Motorist Guidance Details

National Park Service Sign Program

May 23, 2014

NPS Sign Program Harpers Ferry Center

Interpretive Design Center Harpers Ferry, WV 25425

304-535-4069

Attachment F

D1.0 | NPS

PARK

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

2-D1.0 NPS Standard Extruded Aluminum Sign Back Elevation

1-D1.0 NPS Standard Extruded Aluminum Sign Fabrication

With Metal Posts

Extruded Aluminum Panels with Avery T-5409 Brown Type III/IV Very High Intensity or Equivalent Full Sheet Wrap, Back Painted to Match NPS Brown, Matthews Paint MP63848

Edge Strip Painted to Match NPS Brown, Matthews Paint MP63848

Post Clamp Hardware

W6x12 Galvanized Steel I-Beam Post with Breakaway Components

Avery Type III/IV Very High Intensity or Equivalent Border and Panel Graphics

1-D1.0B

1-D1.0D

1-D1.0E

Note: All motorist guidance signs and breakaway post components shall be fabricated and installed per federal and local Department of Transportation standards and specifications where applicable.

GL

D ep en d in g o n Si g h t Li n es a n d L o ca l C o d es an d

C o n d it io n s

W6x12 Steel I-Beam Post Or Local DOT Equivalent

Perforated Fuse Plate

Breakaway Base Plate and Stiffener Plate

Welded to Post

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

NPS Brown Matthews Paint

MP63848

(Or equiv.)

Panel Back, Mounting Rail, Post Color:

D1.0A | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

12"

2"

2"

Retro-Reflective Vinyl Wrap

Note: Overlay extend approx. 3/8" over each side in the narrow direction and shall be adhered to the panel.

Stitch Bolts @ 24" O.C.

Post Clip

Slotted Hole 7/16" x 7/8"

Sign Panel

Slotted Holes Drilled 12" O.C.

End Holes 6" From Ends of Panel

Panel

3/8" Diameter 16 UNC x 1 3/4"

Bolt Lock Nut and Washer

Retro-Reflective Vinyl Wrap

Extruded Aluminum Full Panel

Extruded Aluminum Half Panel

6"

3-D1.0A Slotted Hole Detail - Plan View

Scale: 1" = 1' - 0"

First Slots in from both edges are bolted. Remaining slots are typically spaced 12" O.C.

2-D1.0A Sign Panel Assembly - Side Section Cut

Scale: 3" = 1' - 0"

1-D1.0A Typical Extruded Aluminum Panel Elevations

Scale: 1/2 Actual Size

6" 12" 12"

D1.0B | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

400%

QTY:

QTY:

Sign Panel

Stainless Steel or Aluminum Size #6 x 1/2"

Slotted Pan Head Screws @ 24" C.C.

or 1/8" S.S. Blind

Rivets

Sign Panel

Aluminum Edge Strip

1-D1.0B Panel-Post Attachment Detail

2-D1.0B Edge Strip Detail - Top Section Cut

Note: An additional 1-1/2" shall be added to panel width dimension to accommodate for edge strip overhang.

3/4"

2"

Post Clamp

3/8" Square Head Bolt with Flat Washer and Self Locking Nut

W6x12 Galvanized Steel I-Beam Post

Compression Washer

Z-Bar Mounting Rail with Drilled Mounting Slots

D1.0C | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Actual Size

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

100%

QTY:

QTY:

1-D1.0C Post Clip Plan View 3-D1.0C Alternative Post Clip Plan View

2-D1.0C Post Clip Elevation 4-D1.0C Alternative Post Clip Elevation

1.0" 0.25" 0.625"

1.875" 0.5"

1.0" 0.36" 1.312"

1.594"

1.484"

0.188"

0.312" 1.0"

0.312"

5/8" 15/16"

1 9/16"

3/16"

11/32"

5/16"

11/32"

1"

1/8"

7/16"

1"

5/16"

1/8"

0.378" 7/8" diam.

plus draft3/16"

1/16"

1"

1/16"

7/16" diam.

7/16" x 11/16" Slotted Hole

Note: Centerline of hole for 3/8" diameter square head bolt x 2 1/4" long with a flat washer and hex nut. Bolt head dimensions shall be in accordance with ANSI B 18.2.1 as referred to in the AISC manual of steel construction. Bolt assembly shall be galvanized.

Beam flange of W shapes:

7/16" leg of clamp toward W shapes 15 lbs/ft. and greater

Beam flange of W and S shapes:

5/16" leg of clamp toward W and S shapes 12 lbs/ft. and less

Post clamp to be ASTM B26 or B108 cast Aluminum alloy 356.0-T6 (.173 lbs each)

D1.0D | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

1-D1.0D Post Fuse Plate Connection

Note: Parts shall be saw cut either before galvanizing and the galvanized cut cleaned of zinc build-up, or saw cut after galvanizing and the cut surface.

2-D1.0D Fuse Plate Detail

W6x12 Galvanized Steel I-Beam Post

Galvanized Steel Perforated Fuse Plate

1/2"-13 Bolt with Beveled Washers

4"

1"

1"

4 1/4"

1" 1" 1"

1 1/8" 1 1/8"

D1.0E | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY: 1-D1.0E Breakaway Post Detail 2-D1.0E Post Top Section Cut

4-D1.0E Bolt Keeper Plate Detail3-D1.0E Stiffener Plate Detail

2-D1.0E

W6x12 Galvanized Steel I-Beam Post

Galvanized Steel Stiffener Plate Welded to Post

Galvanized Steel Breakaway Base Plate Welded to Post

High Strength Hex Head Bolt with Hex Head Nut and Three

(3) Washers

Bolt Plate Keeper

8 1/2"

10"

8 1/2"

10"

1/2"4"

1 1/8"

2 3/4"

1 1/8"

5"

1 1/8"

2 3/4"

1 1/8"

5"3/4"

5"

3/4"

2"

1/2"

1/2"

2" 6" 2"

D2.0 | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

6x8 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

GL

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

Extruded Aluminum Panels with Avery T-5409 Brown Type III/IV Very High Intensity or Equivalent Full Sheet Wrap, Back Painted to Match NPS Brown, Matthews Paint MP63848

Edge Strip Painted to Match NPS Brown, Matthews Paint MP63848

1/4" Thick Aluminum Mounting Angles Painted to Match NPS Brown, Matthews Paint MP63848

Avery Type III/IV Very High Intensity or Equivalent Border and Panel Graphics

1-D2.0C

1-D2.0 NPS Standard Extruded Aluminum Sign Fabrication

With Wood Posts

2-D2.0 NPS Standard Extruded Aluminum Sign Elevation

Double or Triple Post - Panels Wider Than 48"

NPS Brown Matthews Paint

MP63848

(Or equiv.)

Panel Back, Mounting Rail, Post Color:

Panels 96" and Wider Require Three (3) Posts

D2.0A | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

1-2.0A NPS Standard Extruded Aluminum Sign Elevation

Single Post - Panels Narrower than 48"

GL

1-D3.0C

D ep en d in g o n S ig h t Li n es a n d L o ca l C o n d it io n s

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

GL

2-2.0A Breakaway Wood Post Detail

18"

4"

1-1/2” x 1/2” Breakaway Slot Note: Slot goes through Entire Depth of Post

D2.0B | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

12"

2"

2"

Retro-Reflective Vinyl Wrap

Note: Overlay extend approx. 3/8" over each side in the narrow direction and shall be adhered to the panel.

Stitch Bolts @ 24" O.C.

Post Clip

Slotted Hole 7/16" x 7/8"

Sign Panel

Slotted Holes Drilled 12" O.C.

End Holes 6" From Ends of Panel

Panel

3/8" Diameter 16 UNC x 1 3/4"

Bolt Lock Nut and Washer

Retro-Reflective Vinyl Wrap

Extruded Aluminum Full Panel

Extruded Aluminum Half Panel

6"

3-D2.0B Slotted Hole Detail - Plan View

Scale: 1" = 1' - 0"

First Slots in from both edges are bolted. Remaining slots are typically spaced 12" O.C.

2-D2.0B Sign Panel Assembly - Side Section Cut

Scale: 3" = 1' - 0"

1-D2.0B Typical Extruded Aluminum Panel Elevations

Scale: 1/2 Actual Size

6" 12" 12"

D2.0C | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

400%

QTY:

QTY:

4" x 4" x 1/2" Thick Continuous Aluminum Angle Mounted to Post, Paint Same Color as Post

1/2"-13 Round Head, Square Neck Galvanized

Steel Carriage Bolt Post Clip

Sign Panel

3/8" Diameter 16 UNC x 1 3/4" Bolt Lock Nut and Washer

Stainless Steel or Aluminum Size #6 x 1/2"

Slotted Pan Head Screws @ 24" C.C.

or 1/8" S.S. Blind

Rivets

Sign Panel

Aluminum Edge Strip

1-2.0C Panel-Post Attachment Detail

2-D2.0C Edge Strip Detail - Top Section Cut

Note: An additional 1-1/2" shall be added to panel width dimension to accommodate for edge strip overhang.

3/4"

2"

D2.0D | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Actual Size

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

100%

QTY:

QTY:

1-D2.0D Post Clip Plan View 3-D2.0D Alternative Post Clip Plan View

2-D2.0D Post Clip Elevation 4-D2.0D Alternative Post Clip Elevation

1.0" 0.25" 0.625"

1.875" 0.5"

1.0" 0.36" 1.312"

1.594"

1.484"

0.188"

0.312" 1.0"

0.312"

5/8" 15/16"

1 9/16"

3/16"

11/32"

5/16"

11/32"

1"

1/8"

7/16"

1"

5/16"

1/8"

0.378" 7/8" diam.

plus draft3/16"

1/16"

1"

1/16"

7/16" diam.

7/16" x 11/16" Slotted Hole

Note: Centerline of hole for 3/8" diameter square head bolt x 2 1/4" long with a flat washer and hex nut. Bolt head dimensions shall be in accordance with ANSI B 18.2.1 as referred to in the AISC manual of steel construction. Bolt assembly shall be galvanized.

Beam flange of W shapes:

7/16" leg of clamp toward W shapes 15 lbs/ft. and greater

Beam flange of W and S shapes:

5/16" leg of clamp toward W and S shapes 12 lbs/ft. and less

Post clamp to be ASTM B26 or B108 cast Aluminum alloy 356.0-T6 (.173 lbs each)

D3.0 | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

2-D3.0 Breakaway Wood Post Detail 3-D3.0 NPS Standard .125 Aluminum Sign Front and Side Elevations

18"

4"

1-1/2" x 1/2" Breakaway Slot Note: Slot goes through Entire Depth of Post

NPS Brown Matthews Paint

MP63848

(Or equiv.)

Panel Back, Mounting Rail, Post Color:

4x6 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Painted to Match NPS Brown, Matthews Paint MP63848

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

Avery T6500 White, Type III/IV Very High Intensity or Equivalent Full Sheet Application to Aluminum Panel

Avery OL2009 Recreation Brown Translucent Overlay Film with Compute-Cut Graphics

Line of T-Bar Extrusion Back Welded to Panel Every 12" O.C.

For Support

Panels 96" and Taller Require Three (3) Mounting Rails

Panels 96" and Wider Require Three (3) Posts

1-D3.0C

1-D3.0B

GL

D ep en d in g o n

S ig h t

Li n es a n d

L o ca l C o n d it io n s

1-D3.0 NPS Standard .125 Aluminum Sign Fabrication

D3.0A | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

1/4" = 1' - 0"

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

1600%

QTY:

QTY:

Note:

Splice Location May Need Adjusted To Prevent Disruption of Panel Graphics

Horizontal Splices May Not Be Used eq eq eq eq

1"1" 1"1" 1"1" to

6"

5" 5"

4" 4"

144" to 192"

3-D3.0A Typical .125 Aluminum Panel Details

Two (2) Splice Locations, Twelve (12) Mounting Holes

4-D3.0A Typical .125 Aluminum Panel Details

Three (3) Splice Locations, Sixteen (16) Mounting Holes

Up to 96" to

6"

4" 4"

5" 5" eq eq

1"1"

2-D3.0A Typical .125 Aluminum Panel Details

One (1) Splice Locations , Eight (8) Mounting Holes

1-D3.0A Typical .125 Aluminum Panel Details

Single Sheet, Four (4) Mounting Holes

U p t o

8"

5" 5"

Up to 96"

4" 4" 3/8" Radius Corners (Typ)

5/16" Mounting Holes (Typ)

Panel Back Painted To Match NPS Brown (Typ)

5" 5" to

6"

4" 4"

96" to 144" eq eq eq

1"1" 1"1"

D3.0B | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

400%

QTY:

QTY:

Varies Based on Sign Size, See Chart

1/2"-13 Round Head, Square Neck Galvanized Steel Carriage Bolt with Flat Washer and Hex Nut (Bolt Length Based on Post Size)

4x6 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint MP63848

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match NPS Brown, Matthews Paint MP63848

2"

4" 1/4"-20 x 1" Length Large Diameter Round Head 18-8 Stainless Steel Slotted Machine Screw with Washer and Hex Nut

Note: High Bond Adhesive Tape Along Entire Length of Rail

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

Panel Width

60" or smaller

62"– 70"

72"– 94"

96"– 106"

108"– 124"

126"– 166"

168" or larger

Post Inset to Panel Edge

6"

8"

10"

12"

18"

24"

30"

1-D3.0B Panel-Post Attachment Detail - Top Section

D3.0C | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

3" = 1' - 0"

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

400%

QTY:

QTY:

1/4" Thick Aluminum Continuous “Z-Bar” Mounting Rail, Paint to Match NPS Brown, Matthews Paint MP63848

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

1" x 1" x 1/8" Thick Aluminum Continuous “T-Bar” Extrusion, Back Welded to Panel For Support

6 1/4"

5" 3 3/4"

5"

Note: Very High Bond Adhesive Tape Along Entire Length of Rail

5/16" Diameter Hole to Accept 1/4"-20 Screw

9/16" Diameter Hole to Accept

1/2"-13 Bolt

2 1/2" 2 1/2"

3"

1 1/4"1 1/4"1 1/4"1 1/4"

1"

6 1/2"

1-D3.0C Aluminum Sign Side Section

Note: Panel Back, Z-Bar Mounting Rails, and T-Bar Extrusions Painted to Match NPS Brown, Matthews Paint MP63848

2-D3.0C “Z-Bar” Mounting Rail Detail

1/2"-13 x 7 1/2" Long, Round Head, Square Neck Galvanized Steel

Carriage Bolt with Flat Washer and

Hex Nut

4x6 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

1/4"-20 x 1" Long Large Diameter

Round Head 18-8 Stainless Steel

Slotted Machine Screw with Washer and Hex Nut

D3.0D | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Actual Size

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

100%

QTY:

QTY:

1-D3.0D Road Guide with Changeable Panel

2-D3.0D Changeable Panel Detail

ALU961. C-Channel Extrusion, Polished Note: Extrusion shall be Drilled and Countersunk to Accept 10-32 Flat Screws, Paint to Match Panel Background

10-32 -3/8" 316 Stainless Steel Flat Head, Phillips Machine Screw with Matching Nut and Washer

1/4" x 1/2" Galvanized Steel Carriage Bolt with Matching Nut and Washer

.080" Aluminum Panel Insert with Double-sided Graphics

.125 Aluminum Sign Panel

2-D3.0D

D4.0 | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

Not to Scale

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

GL

D ep en d in g o n

S ig h t

Li n es a n d

L o ca l C o n d it io n s

.125 Aluminum Sign Panel with 3/8" Radius Corners, Panel Back Painted to Match NPS Brown, Matthews Paint MP63848

Avery T6500 White, Type III/IV Very High Intensity or Equivalent Full Sheet Application to Aluminum Panel

Avery OL2009 Recreation Brown Translucent Overlay Film with Compute-Cut Graphics

4x4 Wood Posts Painted to Match NPS Brown, Matthews Paint MP63848

Breakaway or Frangible Coupling as Required by

State and Local Codes

Footer Engineering and Depth as Required for

Structural Integrity and Per State and Local Codes

2-D4.0A

2-3.0 NPS Standard .125 Aluminum -Sign Elevations

For Panels up to 36"

1-D4.0 NPS Standard .125 Aluminum Fabrication

For Panels Up To 36" Wide

NPS Brown Matthews Paint

MP63848

(Or equiv.)

Panel Back, Mounting Rail, Post Color:

D4.0A | NPS

NATIONAL PARK SERVICE

SIGN PROGRAM

PROJECT NUMBER

UNIT | AREA

DRAWING SCALE

See Drawing

SIGN CATEGORY

Motorist Guidance

REVISION | DATE

DRAWING NUMBER

National Park Service U.S. Department of the Interior UniGuide Sign Program 304-535-4069

DRAWING DATE

05-23-2014

DESCRIPTION

PANEL:

STRUCTURE:

ENLARGE FOR FULL SCALE

QTY:

QTY:

2-D4.0A Panel Post Attachment Detail

Scale: 3" = 1' - 0"

1-D4.0A .080 Aluminum Panel Details

Scale: 3/4" = 1' - 0"

3" 3"

3" 3" eq eq

3/8" Radius Corners (Typ)

5/16" Mounting Holes (Typ)

.125 Aluminum Sign Panel

1/4"-20 x 5" Long Galvanized Steel

Carriage Bolt with Washer and Nut

4x4 Breakaway Timber Post Painted to Match NPS Brown, Matthews Paint

MP63848

Panel Back Painted To Match NPS Brown (Typ)

Up to 36"