Att 2 WBD Specification Response Matrix 7Dec2020.xlsx
XLSX spreadsheet 22 KB Posted
- Attached to
- Workboat Docking
- Solicitation number
- N00024-21-R-2250
About this file
This specification response matrix and related solicitation provide details for the Commander, Naval Installation Command Work Boat Docking procurement. The Navy seeks up to ten vessels to meet operational requirements, including a minimum length of 23-25 feet, maximum beam of 12.5 feet, minimum bollard thrust of 6,000 pounds, and top speed of at least 6 knots. Offerors must submit responses on Attachment 2 specifying technical details for compliance with each requirement. Exceptions require accompanying rationale. The specification addresses hull structure, propulsion, and stability needs. The Naval Sea Systems Command is managing the solicitation under number N00024-21-R-2250.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 6.pdf | ||
| Amendment 5.pdf | ||
| Amendment 4.pdf | ||
| Amendment 3.pdf | ||
| Att_4_-REV B_Delivery Schedule.XLS | XLS spreadsheet | |
| Att_4_-REV A_Delivery Schedule.XLS | XLS spreadsheet | |
| Amendment 2.pdf | ||
| Att_5_-REV A_Techncial_Data_Rights.pdf | ||
| Amendment 1.pdf | ||
| Att_8_-_CLIN Pricing Chart Rev A.xls | XLS spreadsheet | |
| Redacted Signed J-A 21-R-2250.pdf | ||
| Att_4_-_Delivery Schedule.XLS | XLS spreadsheet | |
| Att_6_-_Unique_Item_Identification_(UID).doc | DOC document | |
| Attachment Index.docx | DOCX document | |
| Att_9_-_Past_Performance_Information.doc | DOC document | |
| N00024-21-R-2250 Solicitation.pdf | ||
| Att 11 - Past_Performance_Questionnaire.doc | DOC document | |
| Att_1_WBD_CNRNW_Specification_22Feb2021.pdf | ||
| Att_7_-_Warranty Terms.doc | DOC document | |
| Att_5_- Technical Data Rights Assertion.doc | DOC document | |
| Att_8_-_CLIN Pricing Chart.xls | XLS spreadsheet | |
| Att 10 Heeling Moment Calculation 17Sep2020.xlsx | XLSX spreadsheet | |
| Att 3 - WBD Vendor Provided Spare Parts List.xlsx | XLSX spreadsheet |
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
| ATTACHMENT 2 |
| CNIC WORK BOAT DOCKING |
| SPECIFICATION RESPONSE MATRIX |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 as a response for parameters identified in the Specification (See Attachment 1).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA) including fendering and appendages: xx.xx feet (ft) |
| 070-1 | Enter Length (Welded Structure Only): xx.xx ft |
[Nominally 23-25 ft] 070-1 Enter Beam Overall (BOA) including fendering: xx.x ft [Maximum of 12.5 ft]
| 070-1 | Enter Maximum Beam (Welded Structure only): xx.x ft |
| 070-1 | Enter Height, Lowest Appendage (skeg, azimuthing drive, or azimuthing drive guard) to Fixed Structure (Overhead Line Guard): xx.x ft |
| 070-1 | Enter Height, Lowest Appendage to Moveable Structure (highest mast or antenna): xx.x ft |
| 070-1 | Enter Air Draft, Minimum Operation Condition waterline to Overhead Line Guard: xx.x ft |
[Maximum of 11.5 ft] 070-1 Enter Height when Rigged for Transport (cabin and pusher knees removed): xx.x ft [Maximum of 11 ft] 070-1 Enter Width when Rigged for Transport: xx.x ft [Maximum of 12.5 ft.]
| 070-1 | Enter Total Installed Fuel Capacity: xxx gallons [Minimum of 200 gallons] |
| 070-1 | Enter Full Load Displacement (as defined in Section 070): xx,xxx lbs incl x% construction or build margin or both |
| 070-1 | Enter Longitudinal Center of Gravity (LCG) in Full Load: xx.x ft forward of transom/keel intersect |
| 070-1 | Enter Static Draft (Hull): x.x ft at Full Load |
| 070-1 | Enter Static Draft (to skegs or azimuthing drive and its guard): x.x ft at Full Load |
[Maximium of 8 ft] 070-1 Enter Static Freeboard at the transom: x.x ft at Full Load [Between 20-24 inches] 070-1 EnterBollard Thrust: x,xxx lbs [Minimum of 6,000 lbs] 070-1 Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water [Minimum of 6 knots] 079-1 Intact Stability - Identify the maximum thrust value for which the proposed boat fully meets the specified ABS towing criteria x,xxx lbs [Minimum 4,800 lbs] (80% of the minimum required thrust 6,000 lbs)
| 100-1 | General Requirements for Hull Structure - Provide a description of structural methodology. |
| 245-1 | Azimuthing Drive - Verify that the proposed boat will achieve the required thrust and speed using the specified engine, marine gear, and azimuthing drive. |
| All | Work Boat Docking Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-3. |
| Offeror's Notes: |
Attachment 2 &12N00024-21-R-2250 &10 &P of &N
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT X |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 40.5 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 39.5 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 16.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 2,100 rpm |
| 070-2 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat X Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 581-1: Exception: Offeror has no local distributor for Fortress anchors and has assessed alternatives in accordance with Specification Section 042-3. Offeror proposes a BrandX Model xxx123 anchor in lieu of a Fortress anchor specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has provided BrandX anchors in 300 boats in similar sizes and applications. |
RFP N00024-17-R-2216
File details come from the government source that posted it. Updated .