80JSC024R0003 - Amendment 1 SF30 - 11.19.2024.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1

1. CONTRACT ID CODE

I

PA

E OF PAGES

I 522

3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER

5. PROJECT NUMBER (If applicable)

11/19/2024

2. AMENDMENT/MODIFICATION NUMBER

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE I Andrea De Paz NASA Johnson Space Center 2101 NASA Parkway, Houston, TX 77058-3696

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) SA. AMENDMENT OF SOLICITATION NUMBER

80JSC024R0003

SB. DATED (SEE ITEM 11)

10/25/2024

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

CODE I FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

[8J The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers D is extended. [8J is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor Dis not Dis required to sign this document and return ____ _ copies to the issuing office.

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED

(Signature of person authorized to sign)

Previous edition unusable

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of Amendment 1 to the Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS) RFP posted on October 25, 2024 is to:

Amendment 1 , replaces the RFP and Excel Attachment L-5a COSMOS Cost Price Template issued on October 25, 2024 in its entirety. See Page 2.

Except as provided herein, all terms and conditions of the document referenced in Item SA or 1 OA, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

(Signature of Contracting Officer)

STANDARD FORM 30 (REV.11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Andrea De Paz

List of Changes from RFP to Amendment 1

Section Page Description of Change A A-5 Removed Clause K.11

H.8 (a) H-12 Revised referenced to Attachment J-15 to Attachment J-14

J-20 J-20-6

Removed the following OFI + language “Proposals shall include a provision that all Sustaining Material purchases and Development and Modification Material purchases specifically identified and directed by the Government shall be purchased without the application of fee. " and replaced with, “ NTE Award Fee Rate/ NTE Fixed Fee Rate will be applicable to the total cost and price (labor, non-labor, & indirect rates) of future task orders, excluding travel. In accordance with B.8 TRAVEL, No fee or profit shall be applied to the costs of travel "

K.11 K-19 Removed Clause

L.14 L-11

Removed the following language from L.14

SOFTWARE AND SECURITY

REQUIREMENTS AND INSTRUCTIONS TO

OFFERORS second paragraph: "The

CMMIDEV Level 3 rating or higher shall be at corporate level or at the specific corporate organizational unit(s) level responsible for performing the Class A software development." and "(e.g., at the corporate level or at the specific corporate organizational unit(s) level) that will perform the necessary software development work must".

L.17 (b) Table L-1 L-16 Removed Org Chart from Past Performance Page count

L.21 L-42 Updated "FPRA/FPRA" to "FPRA/FPRR"

L.21 L-5a Cost Price Template Tab 9 CFAOT

Updated Cell E33 to state, "Provide copy of recent Accounting System audit report; or status and brief description of audit issues; if not applicable, indicate such."

L.22 (c) L-48 Referenced clause 52.215-17 was updated to correctly reference 52.230-1

L.22 (c) L-48

Removed the following from paragraph (c) , "and the offer shall clearly identify where in the disclosure statement where the following are addressed: Contractor Purchasing.1

Requirements for Cost Tracking and Accounting and Associated Business Systems."

L.23 L-54 Updated "Section II.1" to "Section I"

L.23 L-54 Removed, "F.6 – Fill in Options to Extend Period of Performance" from Section F and replaced with "None"

M.7 1 (c) M-13

Removed the following from paragraph (c) , "and the offer shall clearly identify where in the disclosure statement where the following are addressed: Contractor Purchasing.1

Requirements for Cost Tracking and Accounting and Associated Business Systems."

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

9. Sealed offers in original and copies for furnishings the supplies or services in the Schedule will be received at the place specified in item 8, or if hand carried, in the depository located in until local time

(Hour) (Date) CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision Number 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR

INFORMATION

CALL:

A. NAME

Andrea De Paz

B. TELEPHONE (NO COLLECT CALLS) C. EMAIL ADDRESS

jsc-cosmos@mail.nasa.gov

AREA CODE NUMBER EXTENSION

11. TABLE OF CONTENTS

(X) SECTION DESCRIPTION PAGE(S) (X) SECTION DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

X A SOLICITATION/CONTRACT FORM 6 X I CONTRACT CLAUSES 30

X B SUPPLIES OR SERVICES AND PRICES/COSTS 5 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

X C DESCRIPTION/SPECIFICATIONS/WORK STATEMENT 53 X J LIST OF ATTACHMENTS 259

X D PACKAGING AND MARKING 2 PART IV - REPRESENTATIONS AND INSTRUCTIONS

X E INSPECTION AND ACCEPTANCE 3

K REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

X F DELIVERIES OR PERFORMANCE 5

X G CONTRACT ADMINISTRATION DATA 15 L INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS 82

X H SPECIAL CONTRACT REQUIREMENTS 17 M EVALUATION FACTORS FOR AWARD 16

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause Number 52.232-8)

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) 30 CALENDAR DAYS (%) CALENDAR DAYS (%)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

AMENDMENT NUMBER DATE AMENDMENT NUMBER DATE

15A. NAME AND

ADDRESS

OF OFFEROR

CODE FACILITY 16. NAME AND THE TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

15B. TELEPHONE NUMBER

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE

X

18. OFFER DATE

AREA CODE NUMBER EXTENSION

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL OPEN COMPETITION UNDER THE

UNITED STATES CODE AT:

10 U.S.C. 3204(a) 41 U.S.C. 3304(a) ( )

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified) See Block 25

24. ADMINISTERED BY (If other than Item 7) 25. PAYMENT WILL BE MADE BY CODE https://www.nssc.nasa.gov/vendorpayment NSSC-AccountsPayable@nasa.gov

26. NAME OF CONTRACTING OFFICER (Type or print)

Andrea De Paz

27. UNITED STATES OF AMERICA

X (Signature of Contracting Officer)

28. AWARD DATE

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition is unusable

SOLICITATION, OFFER, AND AWARD

2. CONTRACT NUMBER

PAGE OF PAGES

6. REQUISITION/PURCHASE NUMBER

CODE 8. ADDRESS OFFER TO (If other than item 7)

NASA Johnson Space Center 2101 NASA Parkway, Houston, TX 77058-3696

5. DATE ISSUED4. TYPE OF SOLICITATION

SEALED BID (IFB) INVITATION FOR BID

NEGOTIATED (RFP) REQUEST FOR

X PROPOSAL

3. SOLICITATION NUMBER

80JSC024R0003

RATING

Not Applicable

1. This Contract is a Rated Order under the Defense Priorities and Allocations System (DPAS) - Code of Federal Regulations - at 15 CFR 700.

See Section L for Instructions of the Solicitation

STANDARD FORM 33

(REV. 12/2022)

Prescribed by GSA - FAR (48 CFR) 53 214 ( )

10/25/2024 http://www.nssc.nasa.gov/vendorpayment mailto:NSSC-AccountsPayable@nasa.gov

Solicitation#

80JSC024R0003

Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS) Section A

A-1

Section A: DETAILED TABLE OF CONTENTS

A-2

Page

SECTION B. SUPPLIES OR SERVICES AND PRICES/COSTS B-1

B.1 Listing of Clauses Incorporated by Reference B-1 B.2 Contract Type and Key Contract Features B-1 B.3 Contract Value B-2 B.4 Contractor Funding for Phase-In (Firm Fixed Price) B-2 B.5 NFS 1852.232-81 Contract Funding (JUN 1990) B-2 B.6 IDIQ Minimum and Maximum Ordering Limits (JSC 52.216-90)(NOV 2018)

B-3 B.7 Fully Burdened Rate Table For Pricing Cost Reimbursable (CR) Task and

Delivery Orders Materials and other Non-Labor Costs B-3 B.8 Travel B-4 B.9 Materials and Other Non-Labor Costs B-5

SECTION C. STATEMENT OF WORK C-1

C.1 Contract for Organizing Spaceflight Mission Operations and Systems C-4

C.2 Contract Management C-9 C.3 Mission Systems Support C-19

SECTION D. PACKAGING AND MARKING D-1

D.1 Listing of Clauses Incorporated by Reference D-1 D.2 NFS 1852.245-74 Identification and Marking of Government

Equipment (JAN 2011) D-1

SECTION E. INSPECTION AND ACCEPTANCE E-1

E.1 Listing of Clauses Incorporated by Reference E-1 E.2 NFS 1852.246-71 Government Contracting Quality Assurance

Functions (OCT 1988) E-2 E.3 NFS 1852.246-72 Material Inspection and Receiving Report (APR 2015) E-2

SECTION F. DELIVERIES OR PERFORMANCE F-1

F.1 Listing of Clauses Incorporated by Reference F-1 F.2 NFS 1852.247-73 Bills of Lading (JUN 2002) F-1 F.3 Place of Performance F-3 F.4 Period of Performance F-3 F.5 Shipping Instructions F-4 F.6 Options to Extend Period of Performance F-4

SECTION G. CONTRACT ADMINISTRATION DATA G-1

A-3

G.1 Listing of Clauses Incorporated by Reference G-1 G.2 NFS 1852.216-76 Award Fee for Service Contracts (JUN 2018) G-2 G.3 NFS 1852.232-80 Submission of Voucher/Invoices For

Payment (APR 2018) G-4 G.4 NFS 1852.245-71 Installation-Accountable Government Property (JUN 2018)

(Alternate I) (JAN 2011) G-5 G.5 NFS 1852.245-73 Financial Reporting of NASA Property in the Custody of

Contractors (JAN 2017) G-8 G.6 NFS 1852.245-76 List of Government Property Furnished Pursuant to FAR 52.245-1 (JAN 2011) G-10 G.7 NFS 1852.245-77 List of Government Property Furnished Pursuant to FAR 52.245.2 (JAN 2011) G-10 G.8 NFS 1852.245-82 Occupancy Management Requirements (SEP 2017) G-11 G.9 NFS 1852.245-83 Real Property Management Requirements (JAN 2011) G-11 G.10 NASA Security Program and Identification of Employees (JSC 52.204-92)(JUL 2022) G-12 G.11 Emergency Preparedness and Response G-14 G.12 Technical Direction G-14

SECTION H. SPECIAL CONTRACT REQUIREMENTS H-1

H.1 Listing of Clauses Incorporated By Reference H-1 H.2 NFS 1852.209-71 Limitation of Future Contracting (DEC 1988) H-2 H.3 NFS 1852.225-70 Export Licenses (FEB 2000) – Alternate I (FEB 2000) H-4 H.4 NFS 1852.235-71 Key Personnel and Facilities (MAR 1989) H-4 H.5 Small Business Subcontracting Goals (JSC 52.219-90)(JUL 2022) H-6 H.6 Environmental Compliance (JSC 52.223-94)(MAR 2023) H-6 H.7 Associate Contractor Agreement (ACA) for COSMOS Activities H-11 H.8 Mitigation of Organizational Conflicts of Interest H-12 H.9 Disclosure of Organizational Conflicts of Interest After Contract Award H-13 H.10 No Cost Reimbursement or Fee for Business Development Associated with the Non-Governmental Use of NASA Facilities H-13 H.11 Requirement for Cost Tracking and Accounting and Associated Business

Systems. H-15 H.12 Non-Government use of NASA Facilities H-15 H.13 Option to Transition from Award-Fee to Fixed-Fee H-17 H.14 Option to Transition from Fixed-Fee to Award-Fee H-17

SECTION I. CONTRACT CLAUSES I-1

I.1 Listing of Clauses Incorporated by Reference I-1 I.2 FAR 52.204-1 Approval of Contract (DEC 1989) I-13 I.3 FAR 52.201-21 Basic Safeguarding of Covered Contractor Information

Systems (NOV 2021) I-13 I.4 Reserved I-15 I.5 FAR 52.204-30 Federal Acquisition Supply Chain Security Act Orders

Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS) Section A

A-4

(DEC 2023) – Prohibition (Alt I)(DEC 2023) I-15 I.6 Reserved I-20 I.7 FAR 52.216-18 Ordering (AUG 2020) I-20 I.8 FAR 52.216-19 Order Limitations (OCT 1995) I-20 I.9 FAR 52.216-21 Requirements (OCT 1995) I-21 I.10 FAR 52.215-19 Notification of Ownership Changes (OCT 1997) I-22 I.11 FAR 52.216-22 Indefinite Quantity (OCT 1995) I-23 I.12 Reserved I-23 I.13 FAR 52.252-6 Authorized Deviations in Clauses (NOV 2020) I-23 I.14 FAR 52.223-9 Estimate of Percentage of Recovered Material Content for

EPA-Designated Items (MAY 2008) I-24 I.15 FAR 52.223-11 Ozone-Depleting Substances and High Global Warming

Potential Hydrofluorocarbons (MAY 2024) I-24 I.16 FAR 52.227-23 Rights to Proposal Data (Technical) (JUN 1987) I-25 I.17 FAR 52.232-19 Availability of Funds for the Next Fiscal Year (APR 1984) I-25 I.18 FAR 52.247-67 Submission of Transportation Documents for Audit (FEB 2006) I-26 I.19 FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) I-26 I.20 NFS 1852.204-75 Security Classification Requirements (SEP 1989) I-26 I.21 NFS 1852.215-84 Ombudsman (NOV 2023) I-27 I.22 NFS 1852.216-80 Task Ordering/Delivery Procedure (OCT 1996) I-28 I.23 NFS 1852.225-71 Restriction on Funding Activity with China (FEB 2012)

(Deviation) I-29 I.24 NFS 1852.228-75 Minimum Insurance Coverage (OCT 1988) I-30

SECTION J. LIST OF ATTACHMENTS

J-1

J-1 Glossary J-1.3 J-2 Applicable Documents List J-2.1 J-3 Fee Distribution Plan (Award & Fixed Fee) J-3.1 J-4 Small Business Subcontracting Plan J-4.1 J-5 Safety and Health Plan J-5.1 J-6 DD Form 254, Department of Defense (DoD) Contract Security

Classification Specification J-6.1

J-7 Total Compensation Plan (TCP) J-7.1 J-8 Government Furnished Property J-8.1 J-9 Installation Accountable Government Property J-9.1 J-10 COSMOS Software List J-10.1 J-11 Phase-In Plan J-11.1 J-12 Standard Labor Categories J-12.1 J-13 Continuous Improvement Plan J-13.1 J-14 Organizational Conflicts of Interest (OCI) Plan J-14.1

J-15 RESERVED J-15.1

J-16 Data Requirements List (DRL) J-16.1 J-17 Data Requirements Description (DRD) J-17.1 J-18 List of Facilities J-18.1 J-19 Acronyms J-19.1

Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS) Section A

A-5

J-20 Labor Rate Tables J-20.1 J-21 Work Breakdown Structure (WBS) J-21.1 J-22 Floor Space J-22.1 J-23 Government Property Management Plan (PMP) J-23.1 J-24 Contract Management Plan (CMP) J-24.1 J-25 Requirements Statements List J-25.1 J-26 Diversity, Equity, Inclusion, and Accessibility (DEIA) Plan J-26.1

SECTION K –REPRESENTATIONS, CERTIFICATIONS, AND OTHER

STATEMENTS OF OFFERORS K-1

K.1 Provisions Incorporated by Reference K-1 K.2 FAR 52.204-8 Annual Representations and

Certifications (MAY 2024) K-1 K.3 FAR 52.204-24 Representation Regarding Certain

Telecommunications and Video Surveillance Services or Equipment (NOV 2021) K-7

K.4 FAR 52.204-29 Federal Acquisition Supply Chain Security Act Orders (DEC 2023) K-10

K.5 FAR 52.209-7 Information Regarding Responsibility Matters (OCT 2018) K-11

K.6 FAR 52.209-12 Certification Regarding Tax Matters (OCT 2020) K-13 K.7 FAR 52.209-13 Violation of Arms Control Treaties or Agreements

Certification (NOV 2021) K-13 K.8 FAR 52.230-1 Cost Accounting Standards Notices and Certification

(JUN 2020) K-16

K.9 FAR 52.230-7 Proposal Disclosure- Cost Accounting Practice

Changes (APR 2005) K-18 K.10 NFS 1852.225-72 Restriction on Funding Activity with

China-Representation (Deviation)(FEB 2012) K-19

SECTION L – INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS L-1

L.1 FAR 52.252-1Listing of Clauses Incorporated by Reference

(FEB 1998) L-1

L.2 FAR 52.216-1 Type of Contract (APR 1984) L-3 L.3 FAR 52.233-2 Service of Protest (SEP 2006) L-3 L.4 FAR 52.252-5 Authorized Deviations in Provisions (NOV 2020) L-3 L.5 NFS 1852.215-77 Preproposal/Pre-Bid Conference (APR 2015) L-4 L.6 NFS 1852.245-80 Government Property Management Information

– (JAN 2011) Alternate I (JAN 2011) L-5 L.7 NFS 1852.245-81 List of Available Government

Property (JAN 2011) L-6 L.8 Availability of Specifications (JSC 52.215-123)(DEC 2019) L-6 L.9 Communications Regarding This

Solicitation (JSC 52.215-124)(MAR 2023) L-7 L.10 Offeror Acceptance Period (JSC 52.215-125)(MAY 2023) L-7

A-6

L.11 Period Covered by Procurement (JSC 52.215-126)(AUG 2018) L-8 L.12 Maxiflex Tour of Duty (JSC 52.252-90)(NOV 2023) L-8 L.13 Electronic Submission of Proposals – Proposal Marking and L-9

Delivery Through NASA’s EFSS BOX (OCT 2023) L.14 Security Requirements and Instructions L-11 L.15 General Instructions for Preparation of

Proposal (JSC 52.215-107)(AUG 2018) L-11 L.16 Instruction to Offerors L-12 L.17 Proposal Arrangement, Page Limitations, Copies, and

Due Dates L-13 L.18 Proposal Formatting Instructions (JSC 52.215-113)(NOV 2023) L-19 L.19 Mission Suitability Factor – Volume I L-21 L.20 Part Performance Information

(JSC 52.215-114)(NOV 2022) – Volume II L-32 L.21 Cost and Price Factor – Volume III L-35 L.22 Responsibility Considerations – Volume IV L-47 L.23 Model Contract and Additional Requirements – Volume V L-54 L.24 List of Attachments L-55 L.25 Notice of Potential Organizational Conflicts of Interest (OCT 2021) L-8282

SECTION M – EVALUATION FACTORS FOR AWARD M-1

M.1 FAR 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) M-1

M.2 Award Without Discussions M-1 M.3 Source Evaluation Board Evaluation Factors for Award M-2 M.4 Mission Suitability Factor (Volume I) M-3 M.5 Past Performance Evaluation (JSC 52.215-115)

(JUL 2022)(Volume II) M-7 M.6 Cost and Price Factor (Volume III) M-10 M.7 Responsibility Considerations (Volume IV) M-12 M.8 Model Contract (Volume V) M-16

Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS) Section B

B-1

Section B: SUPPLIES OR SERVICES AND

PRICES/COSTS

B.1 LISTING OF CLAUSES INCORPORATED BY REFERENCE

Clause(s) at the beginning of this Section are incorporated by reference, with the same force and effect as if they were given in full text. Clauses incorporated by reference which require a fill-in by the Government include the text of the affected paragraph(s) only. This does not limit the clause to the affected paragraph(s). The Contractor is responsible for understanding and complying with the entire clause.

The following contract clauses pertinent to this section are hereby incorporated by reference:

I. FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1)

CLAUSE

NUMBER DATE TITLE

NONE INCORPORATED BY REFERENCE

II. NASA FAR SUPPLEMENT (48 CFR CHAPTER 18) CLAUSES

CLAUSE

NUMBER DATE TITLE

NONE INCORPORATED BY REFERENCE

(End of Clauses Incorporated by Reference)

B.2 CONTRACT TYPE AND KEY CONTRACT FEATURES

The Contractor shall provide all required services (except as may be expressly stated in this contract as furnished by the Government) necessary to successfully manage, deliver and/or perform, operate, maintain, and provide all requirements in accordance with the Statement of Work (SOW) in Section C, as well as all Data Requirement Description (DRDs) provided in Section J-17: Data Requirements Description, and all other requirements as specified throughout the contract.

In addition, the Contractor shall provide all resources and services (except as may be expressly stated in this contract as furnished by the Government) necessary to successfully perform all phase-in activities, in accordance with the Phase-in Plan, Attachment J-11.

(a) COSMOS is a single-award 100% Indefinite-Delivery/Indefinite-Quantity

B-2

(IDIQ) contract with the ability to issue Cost-Plus-Award-Fee (CPAF) Task Orders/Delivery Orders. There is an option to transition CPAF Task Orders/Delivery Orders to Cost-Plus-Fixed-Fee (CPFF) at the discretion of the Government no later than 45 calendar days into a fee evaluation period (H.13 Option To Transition From Award-Fee To Fixed-Fee). There is an option to transition CPFF Task/Orders Delivery Orders back to CPAF at the discretion of the Government no later than 45 calendar days into a fee evaluation period (H.14 Option To Transition From Fixed-Fee To Award- Fee). The phase-in activities are Firm-Fixed-Price (FFP).

(b) Contract performance will be measured in accordance with the Section J, Attachment J-3, Fee Distribution Plan (Award & Fixed Fee).

(c) The Government may require the Contractor to continue to perform services under this contract beyond the base period of performance in accordance with Section F.6, Options to Extend Period of Performance.

(End of clause)

B.3 CONTRACT VALUE

The current contract value is broken out as follows and will be updated as task and delivery orders are issued and revised.

a) The total firm fixed price of all phase-in efforts for this contract is $OFI covering a 92- calendar day phase-in period from July 1, 2025 to September 30, 2025.

b) The estimated cost of this contract (exclusive of fee) is $TBD.

c) The maximum available award fee is $TBD.

d) The total available fixed fee is $TBD.

e) The total estimated cost, maximum award fee, and fixed fee is $TBD

B.4 CONTRACT FUNDING FOR PHASE-IN (FIRM-FIXED-PRICE)

The total amount allotted by the Government to this contract for phase-in is $TBD.

B.5 NFS 1852.232-81 CONTRACT FUNDING (JUN 1990)

a) For purposes of payment of cost, exclusive of fee, in accordance with the Limitation of Funds clause, the total amount allotted by the Government to this contract is $TBD. This allotment is for the COSMOS effort and covers the Phase-In period and the following estimated period of performance: July 1, 2025, through TBD.

B-3

b) An additional amount of $TBD is obligated under this contract for payment of fee.

(End of clause)

B.6 IDIQ MINIMUM AND MAXIMUM ORDERING LIMITS (JSC 52.216-90) (NOV

2018)

In accordance with FAR 52.216-22, Indefinite Quantity, the contract guaranteed minimum amount* to be ordered under this contract is $100,000 and the contract Not to Exceed (NTE) amount* which may be ordered under this contract is $1,800,000,000.

The Government is not obligated to order more than the minimum specified, but may order up to the NTE amount. The Contractor is obligated to fulfill orders issued, up to the NTE amount within the limits specified in FAR 52.216-19 Order Limitations.

* These values are based on dollars. IDIQ service contract values and task order values shall be expressed only in dollars per NFS 1816.504(a).

B.7 FULLY BURDENED RATE TABLE FOR PRICING COST REIMBURSABLE (CR)

TASK AND DELIVERY ORDERS

The purpose of this clause is to set forth the rates to be utilized in the subsequent negotiation of CR IDIQ task orders/delivery orders in accordance with Clause I.22, Task Ordering/Delivery Procedure.

Pricing of all task/delivery orders shall be in accordance with the negotiated fully burdened rates in Attachment J-20, Labor Rate Tables. Under no circumstances shall the rates used to price out task/delivery orders exceed the agreed upon rates in the Labor Rate Tables.

The labor, indirect, and fee rates shall be used in establishment of the estimated cost of individual task/delivery orders. The labor rates are fully burdened composite team rates (prime and all subcontractors); but exclude prime fee.

The overtime and other premium rates, including the indirect cost rates shown at the bottom of the tables shall also be used in negotiation of task/delivery orders, whenever applicable. The NTE Award Fee Rate is the maximum fee rate which may be proposed or negotiated for individual task/delivery orders during contract performance. The NTE Fixed Fee Rate is the maximum fee rate which may be proposed or negotiated for individual task/delivery orders during contract performance, should H.13 OPTION TO TRANSITION FROM AWARD-FEE to FIXED-FEE be exercised. Lower fees may be negotiated for work having

B-4 lower levels of risk or complexity.

The parties agree that the fully burdened labor rates established in Attachment J- 20, Labor Rate Tables shall not be subject to any equitable adjustments on the basis of actual rates varying from these rates.

B.8 TRAVEL

Travel will be conducted in accordance with the current, approved Fiscal Year (FY) Technical Operating Plan (Tech Plan) and Planning, Programming, Budgeting, and Execution (PPBE) (DRD-COSMOS-0018).

All travel shall be in accordance with the Federal Travel Regulation (FTR), approved by the Contracting Officer prior to travel, and allocated to the contract based on actual airfare and per diem rates per the most current official contiguous United Stated (CONUS) or Outside (OCONUS) Per Diem Rates, located at www.gsa.gov/travelpolicy. All requests for travel shall include the purpose and the rationale for the travel, such as why the purpose cannot be accomplished through a means other than travel (e.g., teleconferencing). Costs relating to approved travel should be allocated to individual task orders under this contract. Vouchers may be submitted upon completion of individual trips and shall be prepared and submitted in accordance with Clause G.3, Submission of Vouchers/Invoices for Payment. The vouchers/invoices shall include copies of receipts for airfare, lodging, car rental, and other expenses as required by the company policy. Travel costs will be authorized by individual task orders under this contract in accordance with FAR 31.205- 46, Travel Costs.

All costs for trips will be limited as follows:

(1) The maximum allowable costs for lodging, meals, and incidental expenses are limited to current Government-established per diem rates.

(2) The maximum allowable cost for use of privately owned vehicles shall be restricted to the Federal Travel Regulation.

(3) The allowable air travel expenses are limited to standard coach fare except under

FTR.

(4) The allowable automobile rental cost is in accordance with the FTR.

(5) The per diem paid on travel days are ¾ per diem. The time spent in travel is not considered.

(6) No fee or profit shall be applied to the costs of travel.

B-5

B.9 MATERIALS AND OTHER NON-LABOR COSTS

• Non-labor Resources, including but not limited to, materials, equipment, and facilities will be negotiated on a task order basis in accordance with Clause

I.22, TASK ORDERING/DELIVERY PROCEDURE.

• As applicable, include separate cost/price estimates for materials and other miscellaneous non-labor costs that are required for performance of the task order. All non-labor costs that are proposed must be allowable and allocable in accordance with the FAR, NASA FAR Supplement, and any other applicable NASA procurement policy documents. The Contractor shall include back-up information with their estimate that provides rationale for their proposed cost/price estimates for materials and other nonlabor costs.

[END OF SECTION]

Systems (COSMOS) Section C: Statement of Work

C-1

Operations and Systems (COSMOS)

Section C: STATEMENT OF WORK

C-2

80JSC024R0003

Table of Contents Section C 1 Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS)

1.1 Description of Programmatic Support

1.2 Description of Flight Operations Mission Systems

1.2.1 Mission Control Center Systems (MCCS)

1.2.2 Mission Training Center (MTC)

1.2.3 Integration & Test Environments

1.2.4 Development Environments

1.2.5 Space Vehicle Mockup Facility (SVMF)

1.2.6 Mission Systems Security Center (MSSC)

2 CONTRACT MANAGEMENT

2.1 Financial and Contract Performance

2.1.1 Financial Reporting Form NF533

2.1.2 Supplemental Cost Reports (SCRs)

2.1.3 Other Financial Information

2.2 Contract Communications

2.2.1 Subcontracts

2.2.2 Organizational Conflict of Interest (OCI)

2.2.3 Associate Contractor Agreements (ACAs)

2.3 Technical Metrics

2.4 Logistics

2.5 Collaboration

2.6 Security

2.6.1 Emergency Preparedness

2.6.2 Information Technology (IT) Security

2.6.3 Export Control

2.7 Documentation Management

2.8 Safety and Health Management

2.9 Environmental and Energy Conservation

2.10 Quality Assurance (QA)

2.11 Risk Management

2.12 Certification of Flight Readiness (CoFR)

2.13 Contract Configuration Management

2.14 Information Technology (IT) Plan

2.14.1 IT Purchase Authorization

2.14.2 Section 508 Compliance

2.14.3 Government Property

C-3

80JSC024R0003

2.14.4 Contractor-Owned Capital Property

3 MISSION SYSTEMS SUPPORT

3.1 Common Mission Systems Support

3.1.1 Management

3.1.2 Development, Modification, and Systems Engineering

3.1.3 Maintenance and Sustaining Engineering

3.1.4 Operations

3.1.5 Performance Standards

3.1.6 Test and Checkout

3.1.7 Interface Support

3.1.8 Certification and Training

3.1.9 Metrics/Data and Reports

3.1.10 Requirements Documentation

3.2 Unique Mission Systems Support

3.2.1 Mission Control Center Systems (MCCS) Support

3.2.2 Mission Training Center (MTC) Support

3.2.3 Integration and Test Environment Support

3.2.4 Development Environments Support

3.2.5 Space Vehicle Mockup Facility (SVMF) Support

3.3 Mission Systems Engineering and Support Services

3.3.1 Ground Segment Control Board (GSCB)

3.3.2 Program Requirements Document (PRD)

3.3.3 Human Space Flight (HSF) Network Operations Integration

3.3.4 Systems Engineering and Integration Support

3.3.5 Architectural and Engineering Support

3.3.6 Mockup Management

3.3.7 Test Direction

3.3.8 Facility Management

ACRONYMS

Operations and Systems (COSMOS) Section C

C-4

1. CONTRACT FOR ORGANIZING SPACEFLIGHT MISSION OPERATIONS AND

SYSTEMS (COSMOS)

The Contract for Organizing Spaceflight Mission Operations and Systems (COSMOS) specifies technical, managerial, and administrative work needed to ensure the availability, integrity, reliability, and security of the Flight Operations Directorate’s (FOD) Mission Systems supporting National Aeronautics and Space Administration (NASA) space flight programs requiring mission operations support. For this contract, “Mission Systems” is defined as the systems and subsystems of integrated hardware, software, networks, telecommunications, data, displays, and mockups used in the preparation for and performance of mission operations.

The objective of this contract is to maintain and improve safe, secure, effective, and cost-efficient operations of the Mission Systems. Improvements in efficiency will increase the capacity to perform problem resolution, system improvements, and new development without compromising Mission Systems functionality or performance.

One hundred percent of the work under the COSMOS contract will be negotiated through Task Orders (TOs). Multiple TOs will be in effect during the performance period of the contract. The necessary management and administrative support required to supply the required technical support services will be negotiated via TO, based upon the total sum of technical services ordered. Although the Government may issue or modify TOs at any time, it is anticipated that the majority of services will be ordered on an annual basis.

Task orders for Special Projects may be ordered on other schedules, as appropriate.

1.1 DESCRIPTION OF PROGRAMMATIC SUPPORT

Mission Systems currently support the International Space Station (ISS) Program, including International Partner (IP) and Commercial Visiting Vehicles, the Commercial Crew Program (CCP), and the Moon to Mars Programs. Mission Systems supporting these programs are under development and/or modification in concert with program formulation and implementation. COSMOS applies to the Mission Systems for these programs, and any other programs or missions requiring Mission Systems support.

Mission Systems support the following functions:

• Planning – Design, analysis, and management of trajectories and vehicle systems;

and plan flight and crew activities relative to mission requirements, before, during, and after missions.

• Training – Execution of crew, flight controller, and instructor training and certification.

• Flight Operations – Real-time command and control of vehicle and crew systems involving telemetry monitoring, commanding, analysis (real-time and post-flight), communications, real-time and near real-time support for troubleshooting of on-orbit anomalies, data distribution, data storage, and data archiving.

• Vehicle Development –Test and checkout of new and existing space vehicles.

1.2 DESCRIPTION OF FLIGHT OPERATIONS MISSION SYSTEMS

The following paragraphs describe the Mission Systems that are within the scope of

COSMOS.

C-5

1.2.1 Mission Control Center Systems (MCCS)

The Mission Control Center Systems (MCCS) provide a set of functional capabilities for command, control, and support of space vehicles and their payload elements. The MCCS enterprise spans two security zones: high and moderate. The high security zone is a logically separated set of information technology (IT) infrastructure and computing devices that are required to ensure the safety, reliability, and availability of MCCS controlled/operated spacecraft and their crew. The moderate security zone is a set of IT infrastructure and computing devices that provide mission support functions and capabilities, which allows limited access to the institutional Johnson Space Center (JSC) campus network.

For contingency operations, Backup Control Center (BCC) capabilities and services are provided for each major MCCS subsystem element or function. As such, an environment in both a high security zone and a moderate security zone is provided to enable BCC operability.

1.2.1.1 Mission Control Center – Houston (MCC-H)

The Mission Control Center (MCC) – Houston (MCC-H) is an integrated spacecraft command and control facility capable of supporting the ISS Program, including IP and Commercial Visiting Vehicles, the CCP, and the Moon to Mars Programs. The MCC-H provides command, telemetry, trajectory, real-time mission re-planning, user applications, weather, video, and voice communication services to support mission operations, flight control team training, and testing.

Within the MCC-H, the Mission Critical Environment (MCE) in the high security zone provides capabilities for command and control, trajectory processing, and “safe haven” in the event the moderate security zone is unavailable. The Mission Support Environment (MSE) in the moderate security zone provides for spacecraft monitoring, mission planning, system modeling and analysis, and pre-flight production.

The majority of the MCC-H is physically located at the JSC in the Building 30 Complex.

Some MCC-H assets are situated in locations other than the Building 30 Complex. Refer to Attachment J-9, Installation-Accountable Government Property and Attachment J-18, List of Facilities for the locations.

Mission operations rooms within the MCC-H provide the physical location from which flight controllers support and operate spaceflight missions and vehicles. Rooms provided for this purpose include large, dedicated Flight Control Rooms (FCRs), Operations Suites, and multiple backrooms or Multi-Purpose Support Rooms (MPSRs) for flight controllers supporting FCR positions. Vehicle engineering support groups may support from Mission Evaluation Rooms (MERs) within Building 30, but the remote MCC-H services are frequently utilized for engineering support in lieu of dedicating floor space.

Most payload and science activities for the ISS Program are conducted out of the Payload Operations Integration Center (POIC) at the Marshall Space Flight Center (MSFC) with indirect support from MCC-H. However, MCC-H has been used for some payload operations with payload customers located in one of several payload support rooms.

C-6

In addition to the operational support areas, MCC-H provides computational rooms for the IT infrastructure, warehousing and maintenance areas, and office space. MCC-H also includes the historic Apollo FCR.

1.2.1.2 Backup Control Center – Huntsville Operations Support Center (BCC- HOSC) and White Sands Test Facility (WSTF)

The BCC for mission critical systems is located at the MSFC, and the BCC for some of the mission support systems is located at the White Sands Test Facility (WSTF). These systems provide backup command and control functions to support ISS operations in case of the loss of command and control capabilities at MCC-H. The Contractor coordinates with the MSFC HOSC and the WSTF for services at these locations.

After a threat to the MCC-H has been identified, but prior to BCC activation, FOD may elect to deploy the BCC Activation Team (BAT) to a remote, temporary location. If fully activated, the BAT would be responsible for MCC-H command and control until either handover to a team located at BCC-HOSC or until control is returned to MCC-H.

1.2.2 Mission Training Center (MTC)

Mission Training Center (MTC) is comprised of Information Technology (IT) resources and training facilities that provide the capability to train MCC Flight Control Teams (FCTs), FCT Instructors, and Mission Crews. MTC supports the ISS Program, including IP and Commercial Visiting Vehicles, the CCP, and the Moon to Mars Programs.

MTC provides a wide range of capabilities to facilitate effective crew and flight controller team training. MTC provides a fully integrated simulation of the specific vehicle that is being trained. High fidelity signatures of vehicle systems behavior are generated in response to a simulated vehicle configuration and student interaction with displays and controls. MTC operations are conducted around specially designed scenarios that present nominal and off-nominal vehicle situations. MTC enables the crew and flight controllers to work together to achieve a coordinated response to the dynamic state of the simulated vehicle. This experience builds and sharpens the knowledge and skills that must be established before flight.

TS (Training Systems) are a High-Level Architecture (HLA) based distributed simulation architecture to facilitate integrating training with external simulators such as those used for commercial cargo and commercial crew training.

TS has three primary environments: TS Operations (TS OPS), Software Production Environment (SPE), and Dynamic Skills Training (DST). TS OPS contain assets primarily used for Crew and Flight Controller training. The types of training supported in TS OPS are Full-Task Training (FTT), Part-Task Training (PTT), and Flight Controller Part-Task Training (FCPTT). Other uses of TS OPS include Procedure Verification (PV) and MCC testing. The SPE supports development of new software, maintenance and support of existing software, development of reconfiguration products that support training simulations, and initial integration and testing of the finished software products. The DST environment contains the Dynamic Skills Trainers that are used for specialized skills training by the crew members. In addition, MTC provides simulators called American Segment Trainers (AST) to Russia, European Space Agency (ESA), and Japan Aerospace Exploration Agency (JAXA) to support IP training at those locations.

C-7

The Mission Training Center (MTC) at JSC Building 5 is the primary location of the TS resources, including computational systems, crew stations, and instructor and student suites. The TS includes FTT crew stations for the ISS and Orion, multi-program FTT Instructor Suites, multi-program FCPTT suites, ISS crew PTT rooms, and Gateway PTT rooms. The TS also includes a Robotics FCPTT (RFCPTT) used to train the robotics flight controller positions and to conduct visiting vehicle grappling simulations. The SVMF at JSC Building 9 includes PTTs which support ISS mockup training. The remaining resources are housed throughout JSC Building 4S, JSC Building 9, and JSC Building 30A. The MTC Dynamic Skills Trainer (DST) is a robotics trainer focusing on skills required by the crew to operate the ISS Mobile Servicing System (MSS) robotic arm.

DSTs are located in JSC Building 4S and in JSC Building 30A. There is also a DST in Star City, Russia, but the Contractor is only responsible for this DST’s hand controllers, which is one of the expected responsibilities fully detailed in Section C, 3.2.2.4 MTC Operations.

1.2.3 Integration & Test Environments

For select Mission Systems, the Integration and Test Environments provide an environment to verify functional requirements of system modifications and to perform regression testing. Some of these environments also provide the ability to test the Mission System’s response to hardware failures.

The Moderate Integration and Test Environment (MITE) provides an environment for verification and validation of application software targeted for the moderate security MSE as well as for integration and validation of external services, security services, and Mission Systems operations services.

The High Integration and Test Environment (HITE) provides a high-fidelity environment for verification and validation of platform services, internal services, security services, and application software targeted for deployment and operational use in the high security MCE.

HITE also supports the development of ISS reconfiguration products.

The majority of the MITE/HITE systems are physically located with the MCC-H at the JSC in the Building 30 Complex.

The TS Software Production Environment (SPE) supports integration and testing of simulation loads. The SPE includes simulation host computers, workstations, and associated networks and servers to provide a testing environment equivalent to the operational environment.

The TS SPE is collocated with MTC, primarily in Building 5.

1.2.4 Development Environments

Development environments for the MCCS and the TS allow the introduction and evaluation of development and sustaining modifications.

C-8

The Mission Systems Development Environment (MSDE) environment located in Building 30 provides software development, integration, and test, and sustaining engineering support for all JSC MCCS software. The MSDE provides a set of functional capabilities necessary to establish an environment which facilitates all lifecycle phases and activities of hardware and software development for the MCCS. These environments support the critical and non-critical application software developed for the MCCS mission system.

The TS Software Production Environment (SPE) located in Building 5 supports development, integration, and testing of simulation software. The SPE includes simulation host computers, workstations, and associated networks and servers to provide a testing environment equivalent to the operational environment.

1.2.5 Space Vehicle Mockup Facility (SVMF)

The SVMF is located in Building 9N/9NW at JSC. It uses full-scale vehicle mockups, flight-like trainers, and engineering test articles to provide a unique environment that closely emulates the physical characteristics of crewed spacecraft. It provides capabilities for astronaut, flight controller, and instructor training, real-time mission troubleshooting, mission development, flight procedures development and verification, flight vehicle sustaining engineering, and developmental engineering analysis for all of NASA’s human spaceflight vehicles as well as commercial customers. The SVMF also has visibility to NASA management, the media, and the general public with over 1 million Space Center Houston visitors per year.

The SVMF high bay area is approximately 57 feet high and covers approximately 73,125 square feet. Two overhead bridge cranes each have one 20-ton capacity hook and one 5-ton capacity hook. There is pressurized breathing air for use in space suits available from both bottles and human-rated air pumps located in the building. The SVMF includes two classrooms/changing rooms and a large SVMF-managed conference room. In-house audio and video systems include links between the SVMF and other buildings on site. An elevated enclosed walkway along the north wall provides public visitors a view of the daily activities.

The SVMF has over 50 mockups and trainers for the ISS Program (including commercial partners), and Moon to Mars Programs. The mockups used in the SVMF are full-scale (1:1) models of spacecraft or spacecraft components. Depending on their purpose, mockups can vary from low fidelity, which models the basic volume and shape of the spacecraft/component, to high fidelity which very closely matches the “look and feel” of the spacecraft/component. Mockups may be built from corrugated plastic for temporary use (e.g., for short-term engineering evaluations) or from aluminum or steel for years of use. Small components for the mockups may be built using the SVMF’s 3-D printers.

Simple mockups may be designed and modified/built by in-house staff. Large, complex mockups may be provided by an external supplier. The SVMF also includes several unique capabilities to simulate weightless or partial gravity environments. The Precision Air Bearing Facility (PABF) provides a two-dimensional, three degree of freedom simulation of a weightless environment by floating objects on a thin cushion of air, similar to an air hockey table. The Partial Gravity Simulator (POGO) uses a vertically oriented, manually adjusted, servo-controlled pneumatic cylinder to create a selectable offload that can simulate weightless or partial gravity environments. These are most often used in the development and evaluation of Extra-Vehicular Activity (EVA) techniques and

C-9 training.

There are several computer and audio systems within the SVMF. Some of these systems and their associated networks provide for training simulation capability within selected mockups and across other training systems/facilities, while other computer systems are used to maintain the mockups and to configure them for use. There are also local area networks to replicate vehicle systems and the previously mentioned PTTs which support ISS mockup training.

The SVMF includes storage space and a “light shop” with limited metalworking and woodworking capability in Building 59. Nearly all of the Building 59 shop work shall be performed by COSMOS Contractor personnel. There are minimal shop assets in Building 9 with sewing capability and electrical workbench areas. There is also a large outdoor storage area (i.e., laydown yard) adjacent to the SVMF.

1.2.6 Mission Systems Security Center (MSSC)

The Mission Systems Security Center (MSSC) is located in Building 30. The MSSC monitors all Mission Systems elements and manages three Communications Security (COMSEC) Equipment Facilities (CEFs). MSSC personnel perform security operations and engineering services that include operations monitoring, incident management and reporting, threat intelligence management, and compliance management. MSSC personnel also manage classified equipment and manage the creation, storage, and destruction of classified materials.

2. CONTRACT MANAGEMENT

The Contractor shall collaborate with NASA on strategic, innovative, and cost-effective solutions for current and future operations that align with the NASA and FOD vision as it relates to this SOW in accordance with the Continuous Improvement Plan (DRD-

COSMOS-0020).

The Contractor shall provide an efficient and aggressively cost-effective management approach implementing the appropriate structure, processes, and controls and understanding the COSMOS/Government relationship to manage delivery of the key Mission Systems support while meeting technical and performance requirements specified in this SOW. The Contractor shall organize and institute integrated processes and tools for managing the products and services specified in this SOW in accordance with the Contract Management Plan (DRD-COSMOS-0002) and in compliance with the definitions provided in the Attachment J-1, Glossary.

The Contractor shall define and institute processes to improve cost effectiveness in management, administration, development, modification, sustaining, maintenance, reconfiguration, operations, and decommissioning across all Mission Systems to increase the capacity to perform problem resolution, system improvements, and new development without compromising Mission Systems functionality or performance as specified via this SOW. The Contractor shall perform continuous improvement in accordance with the Continuous Improvement Plan (DRD-COSMOS-0020).

The Contractor shall transition the work within this SOW to the follow-on Contractor pursuant to the Contract Phase-Out Plan (DRD-COSMOS-0006).

C-10

2.1 FINANCIAL AND CONTRACT PERFORMANCE

The Contractor, as described in this section, shall provide and maintain financial and contract performance management data for the planning, tracking, accumulation, monitoring, contract cost, and contract performance to…