36C26219B0001-008.pdf

98/99™ Series Exit device

2 • Von Duprin • 98/99 Series

99 Series features grooved mechanism case

Introduction Engineered for value

Von Duprin® devices are designed with our customers in mind. The robust materials and unique engineering add to the longevity of our products, while the flexible design improves their value.

The universal center case provides a simple path to new technology without the cost of replacing the entire device.

Whether it’s adding trim, switching handing or introducing new features, Von Duprin makes it simple with a wide variety of upgradeable kits for the 98/99 Series. In addition to evolving with security needs, Von Duprin’ exit devices are manufactured to meet the highest performance and safety standards.

Passion driving performance

With superior products comes exceptional customer care. Von Duprin customers are supported by industry-leading expertise. Allegion’s representatives average more than 15 years of experience, so you’re assured to receive knowledgeable advice on fire and life safety codes, installation resources and more. And for those looking to take their skills to the next level, Allegion offers instructor-led workshops, videos and online courses. It’s another way Von Duprin stands by our customers—today, tomorrow and for years to come.

VON DUPRIN

Administrative Offices 2720 Tobey Dr.

Indianapolis, IN 46219

Customer Service 877-671-7011 800-999-0328 - Fax

Technical Support 877-671-7011

Latch bolt Deadlocking latchbolt provides security and improved performance at standard device cost.

The Quiet One® A fluid damper decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations.

Furnished on all 98/99™ Series exit devices.

Von Duprin exit devices are available in two external surface styles, designated 98 and 99 Series.

98 Series features smooth mechanism case

3 • Von Duprin • 98/99 Series

Fire exit hardware

Rim devices

98-F/99-F 10

Trim 11

XP rim devices

XP98/99-F 14

Trim 15

Mortise lock devices

9875/9975 18

Trim 19

Surface mounted Vertical rod devices

9827-F/9927-F 22

Trim 23

Three-point latching devices

9857-F/9957-F 26

Trim 27

Concealed vertical rod devices

9847-F/9947-F 30

Trim 31

9848-F/9948-F 34

Trim 35

Concealed vertical cable devices

9849-F/9949-F 38

Trim 39

Wood door concealed vertical rod devices

9847WDC-F/9947WDC-F 42

Trim 43

Wood door concealed vertical cable devices

9849WDC-F/9949WDC-F 46

Trim 47

Wood door concealed vertical cable devices

9850WDC-F/9950WDC-F 50

Trim 51

Table of contents

Exit hardware

Rim devices

98/99 8

Trim 9

XP rim devices

XP98/99 12

Trim 13

Mortise lock devices

9875/9975 16

Trim 17

Surface mounted Vertical rod devices

9827/9927 20

Trim 21

Three-point latching devices

9857/9957 24

Trim 25

Concealed vertical rod devices

9847/9947 28

Trim 29

9848/9948 32

Trim 33

Concealed vertical cable devices

9849/9949 36

Trim 37

Wood door concealed vertical rod devices

9847WDC/9947WDC 40

Trim 41

Wood door concealed vertical cable devices

9849WDC/9949WDC 44

Trim 45

Wood door concealed vertical cable devices

9850WDC/9950WDC 48

Trim 49

THIS PRODUCT IS OBSOLETE it is replaced by the 98/9950 WDC.

See pages 48-51 for more information.

4 • Von Duprin • 98/99 Series

Options and accessories

Symbols

Indicates fire rated application Indicates ADA products

Additional information

ANSI Function, grade and type Ul fire labeling and opening size

Finishes Standard and special finishes

Trim options

Knob Thumbpiece Lever Electrified outside lever trim (E996L) Breakaway lever Thumbturn control Hospital pull Offset pull Vandal resistant pull AD-Series adaptable electronic trim

Strike options

Strike/Stile information Strikes

Dogging options

Cylinder dogging Cylinder dogging with Security Indicator Hex key dogging Hex dogging with Security Indicator Less dogging Dogging keys Special center case dogging Double cylinder Double cylinder with Security Indicator

Applications and trim operation

Single and double door applications Door handing Outside trim operation Lever styles

Mechanical options

XP98/99 rim exit device WS Surface vertical rod exit device Less bottom rod AX Accessible device Pullman latch Dummy push pad Braille, embossed, knurled and safety glow (Luminescent) touchpads

Pneumatic options

Pneumatic controlled exit devices Pneumatic power transfer

Electrical options

RX Request to exit LX Latchbolt monitoring SS Signal switch CX Chexit® ALK Alarm kit E Electric mortise lock device EL Electric latch retraction QEL Quiet electric latch retraction CON Allegion Connect

Electrical accessories

Power supplies Electric power transfer

Device accessories

Glass bead kit Vertical rod and latch guard Cover plate kits Cylinders Mullions Sex bolts

5 • Von Duprin • 98/99 Series

Nomenclature – how to order

EL 99 27 -L -16 -F LBR 3' US3 RHRNone

SD

CD

CDSI

HDSI

Standard Special dogging R/VR - panic only Cylinder dogging - panic only Cylinder dogging with Security Indicator Hex dogging with Security Indicator

CX

E

QEL

EL

LX

RX

RX2

SS

Chexit Electric locking mortise/lever Quiet electric latch retraction Electric latch retraction Latch bolt monitoring Request to exit Double request to exit Signal switch

AX

PL

PN

XP

WS

Accessible device Pullman latch Pneumatic latch retraction Heavy protection - rim Tornado and hurricane tested

Series 98-smooth Series 99-grooved

None

47WDC

50WDC

Rim device Surface mounted vertical rod device Concealed vertical rod device Concealed vertical rod wood door device Concealed vertical rod device Concealed vertical cable device Concealed vertical cable wood door device Three-point latch device Mortise lock device

AD

DT

EO

HL

K

K-BE

K-DT

K-NL

L

L-BE

L-DT

L-NL

NL

NL-OP

TL

TL-BE

TP

TP-BE

AD Trim (to come from client) Dummy trim Exit only Hospital pull trim Knob Knob - blank escutcheon Knob, rigid - dummy trim Knob, rigid - night latch Lever (classroom) Lever - blank escutcheon Lever, rigid - dummy trim Lever, rigid - night latch Night latch Night latch cylinder assembly, optional pull Turn lever Turn lever - blank escutcheon Thumbpiece Thumbpiece - blank escutcheon

XX Lever style 06 standard default Optional levers available

F Fire exit device

-2

-2SI

Double cylinder (rim and mortise only) Double cylinder with Security Indicator

LBR

LBL

SG

Less bottom rod Less bottom latch Safety glow (luminescent) touchpad

ALK

CON

Alarm kit Allegion Connect

2' 3' 4'

2' Device (2' door size) 27, 47 or 49 only 3' Device (2' 4"– 3' door size) 4' Device (2' 10"– 4' door size)

Finishes US3, US4, US10, US26, US26D, US28, 313, 315

US32D – 98 ONLY

-AM Antimicrobial (available US26D and US32D)

-LHR

-RHR

Left hand reverse Right hand reverse

6 • Von Duprin • 98/99 Series

Popular double door applications

Mortise lock and surface mounted or concealed vertical cable/rod device combination—same direction

Single mortise lock device

Single door applications

Door handing

Two surface mounted vertical rod devices—same direction (do not use with overlapping astragal)

Two rim devices with mullion— same direction

Single rim device

Two fire exit hardware vertical cables/rods with auxilary fire latch-LBR option

Two vertical rods—double egress

Two concealed vertical cables/rods

Left Hand-Reverse Orientation

LHR

(Left hand reverse)

RHR

(Right hand reverse)

Outside

Right Hand-Reverse Orientation

Left hand-reverse orientation

Right hand-reverse orientation

(Left hand-reverse) (Right hand-reverse)

Outside

Double door applications

Trim operation lever or knob

996L Breakaway™ lever

Standard Blank escutcheonNight latch Dummy

Key locks and unlocks lever or knob. e.g., 996L (Classroom)

Lever or knob always active. Use BE suffix, e.g., 996L-BE. (Passage)

Key retracts latch bolt. Lever or knob is rigid. Use NL suffix, e.g. 996LNL.

(Storeroom)

Lever or knob rigid for pull operation. Use DT suffix, e.g., 996L-DT.

374T/376T Series thumbturn control Standard operation, key locks and unlocks thumbturn. Optional operation, key unlocks thumbturn, re-locks when key is removed. This operation is created by changing the cylinder plate included with control. Use 1 1/4" mortise cylinder with a straight cam. Schlage cam reference L583-477. Use with a pull trim (990DT pictured).

Outside trim operation

The 996L Breakaway trim has become the standard lever trim offering on the 98L/99L Series devices. The Breakaway design is especially effective in areas where vandalism to door hardware is a problem. The design intent is to discourage costly repairs from becoming necessary.

The Breakaway feature is not available on the NL (night-latch) or DT (dummy trim) versions.

7 • Von Duprin • 98/99 Series

M51 Knurling available

M52 Knurling available

M53 M54 M55

M56 M57 1 M61 (Handed)

M62 1 (Handed)

M63 (Handed)

M81 Knurling available

M82 M83 M84 M85 (Handed)

ME1 2

(Handed)

ME2 2

(Handed)

ME3 2

01 02 Knurling available

03* Knurling available

05 06* Default lever Knurling available

07 12 (Handed)

(Omega)

17* Knurling available

ACC

(Accent) (Handed)

AST

(Asti) (Handed)

MER

(Merano) (Handed)

LAT*

Latitude

LON*

Longitude

Decorative Levers

Standard Levers

Lever styles

1. Available in Stainless Steel substrate ONLY.

2. Designed with Gensler as product design consultant.

* Available in stainless steel - specify SS when ordering.

8 • Von Duprin • 98/99 Series

/9

R im e xi t d ev ic e

98/99 Rim exit device

98 and 99 Rim exit devices for all types of single and double doors with mullion, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2014 Grade 1. The 98 device has a smooth mechanism case and the 99 device has a grooved case. The rim device is non-handed except when the following device options are used: SD (special dogging), -2 (double cylinder) or SS (signal switch). See Opposite page for available outside trim and device functions. Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

Hex key dogging comes standard on 98/99 Rim exit devices

The 299 Strike ships standard, optional strikes available

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size

4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor

39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Latch bolt Deadlocking, 3/4" (19mm) throw

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. Optional 425 SNB available, see page 9 for quantities.

Electric options LX Latchbolt monitor switch RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking and unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

-2 Double cylinder -2SI Double cylinder with Security Indicator AX Accessible device GBK Glass bead kit PN Pneumatic latch retraction XP Extra protection SNB Sex bolts SEC Security screws

Dogging feature Hex key dogging standard Dogging options CD Cylinder dogging

CDSI Cylinder dogging with Security Indicator HDSI Hex dogging with Security Indicator SD Special center case dogging LD Less dogging DI Dogging indicator CI Cylinder dogging indicator

Strikes 299 – Dull black

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

CON

Allegion Connectors

• Common connectors to connect various door hardware all the way to the power supply

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

XP

Extra protection

• 90˚ latch-to-strike contact

• Force resistance of 2,000+ lbs.

AX

Accessible device

• UL certified to meet new 5 lb.

maximum operating force requirement

• Exceeds ANSI/

BHMA

requirements

CDSI

Cylinder dogging with Security Indicator

• Visual indication of whether device is dogged or undogged

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

9 • Von Duprin • 98/99 Series

Notes

/9

R im exit d evice

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged

Night latch Key retracts latchbolt

Night latch Key retracts latchbolt optional pull required

Product description 98EO

99EO

98DT

99DT

98NL

99NL

98NL-OP

99NL-OP

Trim description

— 990DT 990NL-R/V

110NL-MD

110NL-WD

Escutcheon plate size

3" x 14 13/16" x 3/32" (76x360x2mm)

3" x 14 13/16" x 3/32" (76x360x2mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) — Projection — 2" (51mm) 2" (51mm) —

ANSI function 01 02 03 03 Cylinder type — — Rim Rim

Handing — — — —

Optional trim x990EO x996EO x996K-DT x996L-DT x696DT x697DT x996K-NL x996L-NL x696NL x697NL

Optional #425 SNB quantity for device

6 2 2 6

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged

Product description 98L 99L

98L-NL

99L-NL

98L-BE

99L-BE

98L-DT

99L-DT

Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type Rim Rim — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

Optional #425 SNB quantity for device

2 2 2 2

* Electrified lever operation available

EO

L L-NL L-BE L-DT

DT NL NL-OP

10 • Von Duprin • 98/99 Series

98-F/99-F Rim exit device

-F /9

-F

R im e xi t d ev ic e

98-F and 99-F Rim fire exit devices for all types of single doors up to 4' x 10' (1219mm x 3048mm) or 8' x 10' (2438mm x 3048mm) double doors with 9954 or 9854 mullion, UL listed for fire exit hardware. See page 76 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2014 Grade 1. The 98-F device has a smooth mechanism case and the 99-F device has a grooved case. The rim device is non-handed except when the following device options are used: -2 (double cylinder) or SS (signal switch). See opposite page for available outside trim and device functions.

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size

4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor

39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Latch bolt Deadlocking, 3/4" (19mm) throw

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. Optional 425 SNB available for metal doors. 425 and 825 SNB required on wood doors without SLM blocking. See page 11 for quantities.

Electric options LX Latchbolt monitor switch RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking and unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

-2 Double cylinder -2SI Double cylinder with Security Indicator AX Accessible device GBK Glass bead kit PN Pneumatic latch retraction XP Extra protection SNB Sex bolts SEC Security screws SLM Special Laminate Material Blocking

Dogging option No mechanical dogging. EL and QEL option available Strikes 299F – Dull black, 499F with mullions

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

SG

Safety glow

• Shows exit door location in darkness or smoke

• Developed to meet MEA standards

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

XP

Extra protection

• 90˚ latch-to-strike contact

• Force resistance of 2,000+ lbs.

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

The 299F Strike ships standard, optional strikes available

499F Strike with 9854/9954 mullion

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

AX

Accessible device

• UL certified to meet new 5 lb.

maximum operating force requirement

• Exceeds ANSI/

BHMA

requirements

CON

Allegion Connectors

• Common connectors to connect various door hardware all the way to the power supply

11 • Von Duprin • 98/99 Series

-F/9

-F R im exit d evice

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged (not recommended for fire device)

Night latch Key retracts latchbolt

Night latch Key retracts latchbolt optional pull required

Product description 98EO-F

99EO-F

98DT-F

99DT-F

98NL-F

99NL-F

98NL-OP-F

99NL-OP-F

Trim description

— 990DT 990NL-R/V

110NL-MD

110NL-WD

Escutcheon plate size

3" x 14 13/16" x 3/32" (76x360x2mm)

3" x 14 13/16" x 3/32" (76x360x2mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) — Projection — 2" (51mm) 2" (51mm) —

ANSI function 01 02 03 03 Cylinder type — — Rim Rim

Handing — — — —

Optional trim x990EO x996EO x996K-DT x996L-DT x696DT x697DT x996K-NL x996L-NL x696NL x697NL

#425 SNB optional

- HMD req. WD w/o SLM pkg.

6 2 2 2

#825 SNB req. WD w/o SLM pkg.

2 (if using trim) 2 2 2

#425 SNB req.

w/ 499F

2 2 2 2

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged (not recommended for fire device)

Product description 98L-F 99L-F

98L-NL-F

99L-NL-F

98L-BE-F

99L-BE-F

98L-DT-F

99L-DT-F

Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type Rim Rim — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

#425 SNB optional

- HMD req. WD w/o SLM pkg.

2 2 2 2

#825 SNB req. WD w/o SLM pkg.

2 (if using trim) 2 2 2

#425 SNB req.

w/ 499F

2 2 2 2

* Electrified lever operation available

EO

12 • Von Duprin • 98/99 Series

X P

/9

R im e xi t d ev ic e

XP98/99 Rim exit device

XP98/99 Rim exit devices are designed for single and double doors with mullion that require increased security. The XP latch provides twice the static load force resistance of standard exit devices. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure. Additionally, the patented latch bolt design provides greater, longer-lasting latch bolt to strike contact which is not easily affected by the twisting motion of a weakened frame, resulting in an opening that will remain strong. Devices are ANSI A156.3 – 2014 Grade 1 and UL listed for panic exit hardware. The rim device is non-handed except when the following device options are used: SD (special dogging) or -2 (double cylinder). See Opposite page for available outside trim and device functions. Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

Hex key dogging comes standard on 98/99 Rim exit devices

The 909 Strike ships standard for single or double doors.

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size

4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor

39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Latch bolt Deadlocking, 3/4" (19mm) throw

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. Optional 425 SNB available, see page 13 for quantities.

Electric options LX-LC Latchbolt monitor switch, low current RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking and unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

-2 Double cylinder (specify handing) -2SI Double cylinder with Security Indicator AX Accessible device GBK Glass bead kit SNB Sex bolts SEC Security screws

Dogging feature Hex key dogging standard Dogging options CD Cylinder dogging

CDSI Cylinder dogging with security indicator HDSI Hex dogging with security indicator SD Special center case dogging (specify handing) LD Less dogging DI Dogging indicator CI Cylinder dogging indicator

Strikes 909 – Dull black

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

CON

Allegion Connectors

• Common connectors to connect various door hardware all the way to the power supply

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

XP

Extra protection

• 90˚ latch-to-strike contact

• Force resistance of 2,000+ lbs.

AX

Accessible device

• UL certified to meet new 5 lb.

maximum operating force requirement

• Exceeds ANSI/

BHMA

requirements

CD

Cylinder dogging

• Replaces hex key dogging

• Requires 1 1/4" mortise cylinder with inverted cam

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

XP latch provides increased security with its two piece design.

13 • Von Duprin • 98/99 Series

/9

R im exit d evice

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged

Night latch Key retracts latchbolt

Night latch Key retracts latchbolt optional pull required

Product description XP98EO

XP99EO

XP98DT

XP99DT

XP98NL

XP99NL

XP98NL-OP

XP99NL-OP

Trim description

— 990DT 990NL-R/V

110NL-MD

110NL-WD

Escutcheon plate size

3" x 14 13/16" x 3/32" (76x360x2mm)

3" x 14 13/16" x 3/32" (76x360x2mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) — Projection — 2" (51mm) 2" (51mm) —

ANSI function 01 02 03 03 Cylinder type — — Rim Rim

Handing — — — —

Optional trim x990EO x996EO x996K-DT x996L-DT x696DT x697DT x996K-NL x996L-NL x696NL x697NL

Optional #425 SNB quantity for device

6 2 2 6

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged

Product description XP98L

XP99L

XP98L-NL

XP99L-NL

XP98L-BE

XP99L-BE

XP98L-DT

XP99L-DT

Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type Rim Rim — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

Optional #425 SNB quantity for device

2 2 2 2

* Electrified lever operation available

EO

14 • Von Duprin • 98/99 Series

XP98-F/99-F Rim exit device

X P

-F /9

-F

R im e xi t d ev ic e Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size

4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor

39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Latch bolt Deadlocking, 3/4" (19mm) throw

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. Optional 425 SNB available for metal doors. 425 and 825 SNB required on wood doors without SLM blocking. See page 15 for quantities.

Electric options LX-LC Latchbolt monitor switch, low current RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking and unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

-2 Double cylinder (specify handing) -2SI Double cylinder with Security Indicator AX Accessible device GBK Glass bead kit SNB Sex bolts SEC Security screws SLM Special Laminate Material Blocking

Dogging option No mechanical dogging. EL and QEL option available Strikes 909 – Dull black, fire rated single doors

954 – Dull black, fire rated double doors

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

SG

Safety glow

• Shows exit door location in darkness or smoke

• Developed to meet MEA standards

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

XP

Extra protection

• 90˚ latch-to-strike contact

• Force resistance of 2,000+ lbs.

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

909 Strike for fire rated single doors

954 Strike for fire rated double doors and 9954XP mullion

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

AX

Accessible device

• UL certified to meet new 5 lb.

maximum operating force requirement

• Exceeds ANSI/

BHMA

requirements

CON

Allegion Connectors

• Common connectors to connect various door hardware all the way to the power supply

XP98/99 Rim fire exit devices are designed for single (up to 4' x 10') and double doors (up to 8' x 10') with 9954-XP mullion that require increased security. The XP latch provides twice the static load force resistance of standard exit devices. The “smart” latch changes shape when subjected to external forces. This design enables the exit door to withstand an external attack and remain secure. Additionally, the patented latch bolt design provides greater, longer-lasting latch bolt to strike contact which is not easily affected by the twisting motion of a weakened frame, resulting in an opening that will remain strong. Devices are ANSI A156.3 – 2014 Grade 1 and UL listed for fire exit hardware. The rim device is non-handed except when the following device option is used: -2 (double cylinder). See Opposite page for available outside trim and device functions. Covers stock hollow metal doors with 86 or 161 cutouts on single doors (may cover cutouts on pairs – consult template).

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

XP latch provides increased security with its two piece design.

15 • Von Duprin • 98/99 Series

-F/9

-F R im exit d evice

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged (not recommended for fire device)

Night latch Key retracts latchbolt

Night latch Key retracts latchbolt optional pull required

Product description XP98EO-F

XP99EO-F

XP98DT-F

XP99DT-F

XP98NL-F

XP99NL-F

XP98NL-OP-F

XP99NL-OP-F

Trim description

— 990DT 990NL-R/V

110NL-MD

110NL-WD

Escutcheon plate size

3" x 14 13/16" x 3/32" (76x360x2mm)

3" x 14 13/16" x 3/32" (76x360x2mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) — Projection — 2" (51mm) 2" (51mm) —

ANSI function 01 02 03 03 Cylinder type — — Rim Rim

Handing — — — —

Optional trim x990EO x996EO x996K-DT x996L-DT x696DT x697DT x996K-NL x996L-NL x696NL x697NL

#425 SNB optional

- HMD req. WD w/o SLM pkg.

2 2 2 2

#825 SNB req. WD w/o SLM pkg.

2 (if using trim) 2 2 2

#425 SNB req.

w/ 954F

2 2 2 2

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged (not recommended for fire device)

Product description XP98L-F

XP99L-F

XP98L-NL-F

XP99L-NL-F

XP98L-BE-F

XP99L-BE-F

XP98L-DT-F

XP99L-DT-F

Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type Rim Rim — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

#425 SNB optional

- HMD req. WD w/o SLM pkg.

2 2 2 2

#825 SNB req. WD w/o SLM pkg.

2 (if using trim) 2 2 2

#425 SNB req.

w/ 954F

2 2 2 2

* Electrified lever operation available

EO

16 • Von Duprin • 98/99 Series

/9

M o rt is e lo ck d ev ic e

9875/9975 Mortise lock device

9875/9975 Mortise lock device for all types of single or double doors, UL listed for Panic exit hardware. Devices are ANSI A156.3 – 2014 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4 3/4" (121mm). The 9875 device has a smooth mechanism case and the 9975 device has a grooved case. The mortise lock device is non-handed except when the following device options are used: -2 (double cylinder) or SS (signal switch).

See opposite page for available outside trim and device functions.

The 7500 Mortise lock is equipped with a 3/4" (19mm) anti-friction latch bolt which is field reversible without removing the lock from the door. It has a non-handed auxiliary bolt for deadlocking and a faceplate with an adjustable bevel.

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size

4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor

39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. Optional 425 SNB available, see page 17 for quantities.

Electric options RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking and unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

-2 Double cylinder GBK Glass bead kit PN Pneumatic latch retraction SNB Sex bolts SEC Security screws

Dogging feature Hex key dogging standard Dogging option CD Cylinder dogging

CDSI Cylinder dogging with security indicator HDSI Hex dogging with security indicator SD Special center case dogging LD Less dogging DI Dogging indicator CI Cylinder dogging indicator

Strikes 575 – Dull Black

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

SS 7500

Signal switch

• Signals unauthorized use of an opening

• Switch makes latch bolt tamper-resistant

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

7500 Mortise Lock

575 Strike

Hex key dogging comes standard on 9875/9975 Mortise Lock Devices

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

CD

Cylinder dogging

• Replaces hex key dogging

• Requires 1 1/4" mortise cylinder with inverted cam

E (E7500) Electric mortise lock device

• Remains latched while unlocked

• Remote electrical control

CON

Allegion Connectors

• Common connectors to connect various door hardware all

17 • Von Duprin • 98/99 Series

75/9

M o rtise lo ck d evice

Notes

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged (not recommended for fire device)

Night latch Key retracts latchbolt

Hospital latch Key locks and unlocks

Product description 9875EO

9975EO

9875DT

9975DT

9875NL

9975NL

9875HL

9975HL

Trim description — 990DT 990NL-M HL6M Escutcheon plate size

3" x 14 3/16" x 3/32" (76x360x2mm)

3" x 14 3/16" x 3/32" (76x360x2mm)

2 9/16" x 5 1/2" x 2 5/8" (65x140x67mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) – Projection — 2" (51mm) 2" (51mm) 2 5/8" (67mm)

ANSI function 01 02 03 — Cylinder type — — 1 1/4" Mortise 1 1/4" Mortise

Handing

Optional trim x990EO x996EO x996K-DT x996L-DT) x696DT x697DT x996K-NL x996L-NL x696NL x697NL

Optional #425 SNB quantity for device

6 2 2 2

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged

Product description 9875L 9975L

9875L-NL

9975L-NL

9875L-BE

9975L-BE

9875L-DT

9975L-DT

Trim description 996L-M* 996L-NL-M 996L-BE-M* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type 1 1/4" Mortise 1 1/4" Mortise — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

Optional #425 SNB quantity for device

2 2 2 2

* Electrified lever operation available

EO

DT NL HL

18 • Von Duprin • 98/99 Series

9875-F/9975-F Mortise lock fire exit device

-F

/9

-F

M o rt is e lo ck fi re e xi t d ev ic e

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw.

Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size

4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor

39 13/16" (1011 mm) 39 11/16" (1008 mm) with mullion

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) and 2 1/4" (57mm) thick metal or wood doors. Optional 425 SNB available for metal doors. 425 and 825 SNB required on wood doors without SLM blocking. See page 19 for quantities.

Electric options RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking and unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

-2 Double cylinder GBK Glass bead kit PN Pneumatic latch retraction SNB Sex bolts SEC Security screws SLM Special Laminate Material Blocking

Dogging option No Mechanical Dogging. EL and QEL option available Strikes 575 – Dull Black

SS 7500

Signal switch

• Signals unauthorized use of an opening

• Switch makes latch bolt tamper-resistant

E (E7500) Electric mortise lock device

• Remains latched while unlocked

• Remote electrical control

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

SG

Safety glow

• Shows exit door location in darkness or smoke

• Developed to meet MEA standards

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

7500 Mortise Lock

575 Strike

9875-F/9975-F Fire exit mortise lock devices for all types of single doors up to 4' x 10' (1219mm x 3048mm) or 8' x 10' (2438mm x 3048mm) double doors installations, UL listed for fire exit hardware; See page 76 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2014 Grade 1. Fits door stiles as narrow as 4 3/4" (121mm).

The 9875-F device has a smooth mechanism case and the 9975-F device has a grooved case. The mortise lock device is non-handed except when the following device options are used: -2 (double cylinder) or SS (signal switch) devices. See opposite page for available outside trim and functions.

The 7500 Mortise lock is equipped with 3/4" (19mm) anti-friction latch bolt which is field reversible without removing the lock from the door. It has a non-handed auxiliary bolt for deadlocking and a faceplate with an adjustable bevel.

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

CON

Allegion Connectors

• Common connectors to connect various door hardware all

19 • Von Duprin • 98/99 Series

-F/9

-F M o rtise lo ck fire exit d evice

Notes

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged (not recommended for fire device)

Night latch Key retracts latchbolt

Hospital latch Key locks and unlocks

Product description 9875EO-F

9975EO-F

9875NL-F

9975NL-F

9875HL-F

9975HL-F

Trim description — 990DT 990NL-M HL6M Escutcheon plate size

3" x 14 3/16" x 3/32" (76x360x2mm)

3" x 14 3/16" x 3/32" (76x360x2mm)

2 9/16" x 5 1/2" x 2 5/8" (65x140x67mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) – Projection — 2" (51mm) 2" (51mm) 2 5/8" (67mm)

ANSI function 01 02 03 — Cylinder type — — 1 1/4" Mortise 1 1/4" Mortise

Handing

Optional trim x990EO x996EO x996K-DT x996L-DT) x696DT x697DT x996K-NL x996L-NL x696NL x697NL

Optional #425 SNB quantity for device

6 2 2 2

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged (not recommended for fire device)

Product description 9875L-F 9975L-F

9875L-NL-F

9975L-NL-F

9875L-BE-F

9975L-BE-F

Trim description 996L-M* 996L-NL-M 996L-BE-M* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type 1 1/4" Mortise 1 1/4" Mortise — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

Optional #425 SNB quantity for device

2 2 2 2

* Electrified lever operation available

EO

DT NL HL

20 • Von Duprin • 98/99 Series

/9

S ur fa ce m o un te d v er tic al ro d d ev ic e

9827/9927 Surface mounted vertical rod device

9827/9927 Surface mounted vertical rod device for all types of single or double doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2014 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The 9827 device has a smooth mechanism case and the 9927 device has a grooved case. The surface vertical rod device is non-handed except when the following device options are used: SD (special dogging), SS (signal switch) or WS (Tornado/Hurricane). See opposite page for available outside trim and functions. Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors.

Finishes – US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E. US15 and US32D available with 98 Series only.

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 2' 2' (610 mm) Door size

3' 2'4' to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size

Device centerline from finished floor

395/8" (1006 mm)

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm) Latch bolt Deadlocking anti-friction top and bottom bolt, 5/8" (16mm) throw Door undercut 1/4" (7mm) recommended Top and bottom latch case

4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)

Vertical rods 1/2" square tubing, standard rods accommodate 7' (2134mm) doors. Top rod length: 34 15/16" (887mm); Bottom rod length:

31 1/2" (794mm). Extension rods available in 3' (914mm) for doors over 7'. One piece top rod is available for 8' (2438mm) and 10' (3048mm) doors.

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) to 2 1/4" (57mm) thick metal or wood doors, and 325 SNB for top and bottom latch.

Optional 425 SNB available.

Electric options LX Latchbolt monitor switch RX Pushpad monitor switch RX2 Double pushpad monitor switch EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit PN Pneumatic latch retraction LBR Less bottom rod WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

GBK Glass bead kit PL Pullman latch WS Tornado and hurricane tested SNB Sex bolts SEC Security screws AX Accessible device (LBR only)

Dogging feature Hex key dogging standard Dogging option CD Cylinder dogging

CDSI Cylinder dogging with security indicator HDSI Hex dogging with security indicator SD Special center case dogging LD Less dogging DI Dogging indicator CI Cylinder dogging indicator

Strikes Top - 299 – Dull black, Bottom – 248L4 and 304L - Unfinished

SS

Signal switch

• Signals unauthorized use of an opening

• Switch makes latch bolt tamper-resistant

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

Hex key dogging comes standard on 9827/9927

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

WS

Windstorm

• Severe weather certified/tested

• FEMA and ICC compliant

• Tornado and hurricane tested

E (E996L) Electrified breakaway lever

• Electrified remote locking/unlocking

• Standard in fail safe condition

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

299 Top strike

248L4 Bottom Strike for use with flat threshold

304L Bottom strike

Top latch

Bottom latch

CON

Allegion Connectors

• Common connectors to connect various door hardware all

21 • Von Duprin • 98/99 Series

27/9

27 S urface m o unted vertical ro d d evice

Notes

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged

Night latch Key retracts latchbolt

Night latch Key retracts latchbolt optional pull required

Thumbturn Key locks and unlocks (use with DT trim)

Thumbturn Blank escutcheon always operable (no cylinder) (use with DT trim)

Product description 9827EO

9927EO

9827DT

9927DT

9827NL

9927NL

9827NL-OP

9927NL-OP

9827TL

9927TL

9827TL-BE

9927TL-BE

Trim description

— 990DT 990NL-R/V

110NL-MD

110NL-WD

374T X 990DT** 374T-BE X

990DT**

Escutcheon plate size

3" x 14 13/16" x 3/32" (76x360x2mm)

3" x 14 13/16" x 3/32" (76x360x2mm)

1 11/16" x 7 1/2" x 7/8" (43x191x22mm)

1 11/16" x 7 1/2" x 7/8" (43x191x22mm)

Pull center to center — 5 1/2" (140mm) 5 1/2" (140mm) — — — Projection — 2" (51mm) 2" (51mm) — 3 1/4" (83mm) 3 1/4" (83mm)

ANSI function 01 02 03 03 11 or 12 16 Cylinder type — — Rim Rim 1 1/4" Mortise —

Handing — — — — — —

Optional trim x990EO x996EO x996K-DT x996L-DT x696DT x697DT x996K-NL x996L-NL x696NL x697NL

Optional #425 SNB quantity for device

6 2 2 6 2 2

Lever Key locks and unlocks

Lever – night latch Key retracts latchbolt

Lever – blank escutcheon Always operable (no cylinder)

Lever dummy trim pull when dogged

Product description 9827L 9927L

9827L-NL

9927L-NL

9827L-BE

9927L-BE

9827L-DT

9927L-DT

Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

2 3/4" x 10 3/4" x 27/32" (70x273x21mm)

Pull center to center — — — — Projection 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm) 2 7/8" (73mm)

ANSI function 08 03 14 02 Cylinder type Rim Rim — —

Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible

Optional #425 SNB quantity for device

2 2 2 2

* Electrified lever operation available.

** 377T must be used for WS98/9927 applications.

EO

DT NL NL-OP TL TL-BE

22 • Von Duprin • 98/99 Series

-F

/9

-F

S ur fa ce m o un te d v er tic al ro d d ev ic e

9827-F/9927-F Fire exit surface mounted vertical rod device pairs of doors up to 8' x 10' (2438mm x 3048mm) , UL listed for fire exit hardware. See page 76 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A156.3 – 2014 Grade 1. The 9827-F device has a smooth mechanism case and the 9927-F device has a grooved case. The surface vertical rod device is non-handed except when the following device options are used: SS (signal switch), and WS (Tornado/Hurricane). See opposite page for available outside trim and device functions. Vertical rod and latch guards are available to protect the bottom rod of the exit device from damage by impacts of carts or gurneys passing through doors. Rod and latch guards can be used on hollow metal or tin clad composite fire doors.

Finishes – US3, US4, US10, US26, US26D, US28 and 313. US15 and US32D available with 98 Series only.

Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove

NL drive screw from device.

Device lengths 2' 2' (610 mm) Door size

3' 2'4' to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size

Device centerline from finished floor

395/8" (1006 mm)

Center case 8" x 2 3/4" x2 3/8" (203mm x 70mm x 60mm) Mechanism case 2 1/4" x 2 1/4" (57mm x 57mm) Projection Pushbar neutral – 3 13/16" (97 mm)

Pushbar depressed – 3 1/16" (78 mm)

Latch bolt Deadlocking anti-friction top and bottom bolt, 5/8" (16mm) throw

Door undercut 1/4" (7mm) recommended Top and bottom Latch case

4 1/2" x 2 1/8" x 1 1/2" (114mm x 54mm x 38mm)

Vertical rods 1/2" square tubing, standard rods accommodate 7' (2134mm) doors. Top rod length: 34 15/16" (887mm); Bottom rod length:

31 1/2" (794mm). Extension rods available in 3' (914mm) for doors over 7'. One piece top rod is available for 8' (2438mm) and 10' (3048mm) doors.

Fasteners and sex bolts (SNB)

Includes screw pack for 1 3/4" (44mm) to 2 1/4" (57mm) thick metal or wood doors, and 325 SNB for top and bottom latch.

Optional 425 SNB available.

Electric options LX Latchbolt monitor switch RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric unlocking and locking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect

Mechanical options

GBK Glass bead kit PN Pneumatic latch retraction LBR Less bottom rod PL Pullman latch WS Tornado and hurricane tested SNB Sex bolts SEC Security screws SLM Special laminate material blocking AX Accessible device (LBR only)

Dogging option No mechanical dogging. EL and QEL option available Strikes Top – 299F (499F LBR) Dull black, Bottom – 304L - Unfinished

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

WS

Windstorm

• Severe weather certified/tested

• FEMA and ICC compliant

• Tornado and hurricane tested

E (E996L) Electrified breakaway lever

• Electrified remote locking/unlocking

• Standard in fail safe condition

LBR

Less bottom rod

• Available with UL

Fire Label

• For pairs of vertical rod devices

CX

Chexit delayed exit

• Meets NFPA 101 requirements

• Self-contained controls, locking, alarm

299F Top strike

499F Top strike - LBR

304L Bottom strike

Top latch

Bottom latch

9827-F/9927-F Surface Mounted Vertical Rod Fire Device

CON

Allegion Connectors

• Common connectors to connect various door hardware all

23 • Von Duprin • 98/99 Series

27-F/9

27-F S urface m o unted vertical ro d d evice

Notes

Standard trim

No outside trim Exit only

Dummy trim Pull when dogged (not recommended for fire device)

Night latch Key retracts latchbolt

Night latch Key retracts latchbolt optional pull required

Thumbturn Key locks and unlocks (use with DT trim)

Thumbturn Blank escutcheon always operable (no cylinder) (use with DT trim)

Product description 9827EO-F

9927EO-F

9827NL-F

9927NL-F

9827NL-OP-F

9927N…