36C26219B0001-007.pdf

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

www.securitytechnologies.ingersollrand.com Rev. 9/11

Standard 4040XP series closer shipped with regular arm, standard plastic cover, and self reaming and tapping screws.

Non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”.

Closer mounts hinge side, top jamb, and parallel arm on either right or left swinging doors.

Closers to meet ADA requirements.

Standard or optional custom powder coat finish.

Optional plated finish on cover, arm, and fasteners.

Optional SRI primer for installations in corrosive conditions.

UL and cUL listed for self-closing doors without hold-open.

Tested and certified under ANSI Standard A156.4, grade one.

The 4040 XPis LCN’s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

Cast Iron

Forged Steel Arm

Double Heat Treated Steel Pinion

All Weather Fluid

Non-Handed

LCN Patented Green Dial

Fast & Accurate Installation Templates

UL & cUL Listed

3/4” Journal Diameter Pinion

Full Compliment Bearing

FEA

TU

RE

S

LCN 4040XP SERIES

PLA

STIC

META

L

HINGE(PULL)

SIDE

TOP JAMB (PULL

TOP JAMB (PUSH)

PARALL

EL ARM

STOP FA

CE

MOUNTING COVER CYLINDER

REG

ULA

R(DOUBLE)

**ARM FUNCTIONFINISH

NON-H

ANDED

NON-S

IZED

ACCESSIB

ILI

TY

DELA

YED ACTION***

POW

DER COAT

PLA

TED

HOLD

-O

PEN

EDA/H

EDA

CUSH/H

CUSH

SCUSH/SHCUSH

180 110110120

Available Not available

Closer available with less than 5.0 lbs. opening force on 36" door ** Maximum opening/hold-open point with standard template

*** Delayed Action Closer incorporates standard 4041 Delay Cylinder

CLOSER MOUNTS

*HINGE (PULL) SIDE

TOP JAMB (PUSH SIDE)

PARALLEL ARM (PUSH SIDE)

*HINGE (pull) side mount shown

The 4040XP Series includes the LCN® Patented Green Dial, a revolutionary visual indicator for Spring Power Adjustment.

HINGE (PULL) SIDE

MOUNTING

MAXIMUM OPENING

Templating allows up to 120°.

Hold-open points 90° up to 120° with hold-open arm.

LCN 4040XP SERIES

Butt Hinges should not exceed 5” (127 mm) in width.

Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120°.

Reveal should not exceed 3/4” (19 mm) for regular arm or hold-open arm.

Top Rail less than 3 3/4” (95 mm) requires PLATE, 4040XP-18.

Plate requires 2” (51 mm) minimum.

Clearance of 2 3/8” (60 mm) behind door required for 90° installation.

*Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute.

MO

UN

TIN

GD

ETA

ILS

Options 4041 Delayed action cylinder*.

Hold-open arm.

Metal cover.

Special Templates Customized installation templates or products may be available to solve unusual applications.

Contact LCN for assistance.

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

www.securitytechnologies.ingersollrand.com Rev. 9/11

LCN 4040XP SERIES

MO

UN

TIN

GD

ETA

ILS TOP JAMB (PUSH SIDE)

MOUNTING

MAXIMUM OPENING

Templating allows up to 120°.

Hold-open points 85° up to 120° with hold-open arm.

Butt Hinges should not exceed 5” (127 mm) in width.

Auxiliary Stop is recommended at hold-open point or where the door cannot swing 120°.

Reveal of 2 9/16” (65 mm) allows 120° opening for REGULAR ARM or standard HOLD-OPEN ARM. 4 13/16” (122 mm) allows up to 120° opening with LONG ARM where standard rod and shoe is replaced with optional LONG ROD AND SHOE 4040XP-79LR. Use H-LONG ARM with LONG HEAD AND TUBE, 4040XP-78HL for hold-open. 8” (203 mm) allows up to 120° opening with EXTRA LONG ARM where standard rod and shoe is replaced with optional EXTRA LONG ROD

AND SHOE, 4040XP-79ELR.

Top Rail requires 1 1/4" (32 mm) minimum.

2 1/4" (57 mm) minimum with closer on PLATE, 4040XP-18TJ.

3" (76 mm) minimum with closer on PLATE, 4040XP-18G.

Head Frame less than 3 1/2” (89 mm) requires PLATE, 4040XP-18TJ.

With flush ceiling, use PLATE, 4040XP-18G.

Either plate requires 1 3/4” (44 mm) minimum.

*Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute.

Options 4041 Delayed action cylinder*.

Hold-open arm.

Metal cover.

Special Templates Customized installation templates or products may be available to solve unusual applications.

Contact LCN for assistance.

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

UN

TIN

GD

ETA

ILSPARALLEL ARM (PUSH SIDE)

MOUNTING

Optional mounting requires PA SHOE, 4040XP-62PA for REGULAR or HOLD- OPEN arms. Add prefix "P" to closer description (eg. P4040XP). P4040XP closer includes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE.

MAXIMUM OPENING

180° opening/hold-open points with all except CUSH arms.

110° opening/hold-open with CUSH arms.

Butt Hinges should not exceed 5” (127 mm) in width.

Auxiliary Stop is recommended at hold-open point, where the door cannot swing 180°, or where CUSH-N-STOP arm is not used.

Clearance for 4040XP-62PA shoe is 4” (102 mm) from door face.

EDA shoe projects 5 1/2” (140 mm) from door face.

CUSH shoe projects 6” (152 mm) from door face.

Top Rail less than 5 3/8” (137 mm) measured from the stop requires PLATE, 4040XP-18PA. Plate requires 2” (51 mm) minimum from the stop.

Head Frame flush or rabetted requires PA SHOE ADAPTER, 4040XP-419.

Stop Width minimum 1” (25 mm). CUSH arm requires minimum 1 1/2” (38 mm).

Blade Stop clearance requires 1/2" (13mm) BLADE STOP SPACER, 4040XP-61.

*Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute.

Options 4041 Delayed action cylinder*.

Hold-open, EDA, HEDA, CUSH, HCUSH, SPRING CUSH or SPRING HCUSH arm.

Metal cover.

Special Templates Customized installation templates or products may be available to solve unusual applications.

Contact LCN for assistance.

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

UN

TIN

GD

ETA

ILS

Clearance for 4040XP-62EDA is 5 1/2” (140 mm) from door face. 6” (152 mm) for CUSH.

Head Frame flush or rabetted requires CUSH FLUSH

PANEL ADAPTER, 4040XP-419.

CUSH ARM requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage for narrow frames.

*Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120° to 70°.

Delay time adjustable up to approximately 1 minute.

- 95˚ with 110˚ template. 85˚ with 100˚ template.

- 75˚ with 90˚ template.

4040XP SERIES EDA MOUNT

4040XP SERIES CUSH MOUNT

MAXIMUM OPENING

EDA arm can be templated for points at: 110°, A = 6 3/8” (162 mm) B = 7 3/4” (197 mm) or 180°.

A = 2 7/8” (73 mm) B = 4 1/4” (108 mm)

Hold-open points up to maximum opening with HEDA arm.

CUSH arms can be templated for opening/hold-open point at:

85°, A = 7 15/16” (202 mm) B = 9 1/8” (232 mm)

90°, A = 7 3/16” (183 mm) B = 8 1/2” (216 mm)

100°, A = 6 1/16” (154 mm) B = 7 1/4” (184 mm) or 110°.

A = 5 1/16” (129 mm) B = 6 3/8” (162 mm)

Spring Cush dead stop points are approximately 5˚ more than templated stop point. Hold open at templated stop points.

Mounting details are the same as 4040XP Series REGULAR or HOLD-OPEN except as listed below. 4040XP Series closers ordered with EDA or CUSH arms include 4040XP-201 FIFTH HOLE SPACER to support the shoe.

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

AC

CE

SS

OR

IES

CYLINDERS

CYLINDER, 4040XP-3071

Heavy duty, non-handed cast iron cylinder assembly.

COVERS

COVER, 4040XP-72

Standard, non-handed plastic cover.

METAL COVER, 4040XP-72MC

Optional, handed cover. Required for plated finishes and custom powder coat finishes.

ARMS

REGULAR ARM, 4040XP-3077

Non-handed arm mounts pull side or top jamb with shallow reveal.

P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting.

PA SHOE, 4040XP-62PA

Required for parallel arm mounting.

LONG ARM, 4040XP-3077L

Optional non-handed arm includes LONG ROD AND SHOE, 4040XP- 79LR for top jamb mount.

EXTRA LONG ARM, 4040XP-3077ELR

Optional non-handed arm includes EXTRA LONG ROD AND SHOE, 4040XP-79ELR for top jamb mount with deep reveal.

HOLD-OPEN ARM, 4040XP-3049

Optional, non-handed arm mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe. 4040XP closer includes 4040XP-62PA shoe required for parallel arm mounting.

LONG HOLD-OPEN ARM, 4040XP-3049L

Optional non-handed arm includes LONG HEAD AND TUBE, 4040XP-3048L for top jamb mount.

EXTRA DUTY ARM, 4040XP-3077EDA

Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations.

HOLD-OPEN EXTRA DUTY ARM, 4040XP-3049EDA

Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. Hold-open function is adjusted at the shoe.

EXTRA DUTY ARMWITH 62G, 4040XP-3077EDA/62G

Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance.

HOLD-OPEN EXTRA DUTY ARMWITH 62G,

4040XP-3049EDA/62G

Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance. Hold-open function is adjusted at the shoe.

72MC72

72LL

79LR

79ELR

62PA

3048L

3049EDA

3077EDA

3049EDA/62G

3077EDA/62G

4040XP-3071

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

CE

SS

OR

IES ARMS cont.

CUSH-N-STOP® ARM, 4040XP-3077CNS

Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe.

HCUSH ARM, 4040XP-3049CNS

Provides hold-open function with templated stop/hold-open points. Handle controls hold-open function.

SPRING CUSH ARM, 4040XP-3077SCNS

Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.

SPRING HCUSH ARM, 4040XP-3049SCNS

Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.

INSTALLATION ACCESSORIES

PLATE, 4040XP-18

Required for hinge side mount where top rail is less than 3 3/4” (95 mm). Plate requires minimum 2” (51 mm) minimum top rail.

PLATE, 4040XP-18G

Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition. Plate requires 1 3/4” (44 mm) minimum head frame.

PLATE, 4040XP-18TJ

Centers top jamb mounted closer vertically on head frame where face is less than 3 1/2” (89 mm). Plate requires 1 3/4” (44 mm) minimum head frame.

PLATE, 4040XP-18PA

Required for parallel arm mounting where top rail is less than 5 1/2” (140 mm), measured from the stop. Plate requires 2” (51 mm) minimum top rail.

18G 18TJ

18PA

3077CNS

3049CNS

3077SCNS

3049SCNS

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

CE

SS

OR

IES

INSTALLATION ACCESSORIES cont.

CUSH SHOE SUPPORT, 4040XP-30 provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3 1/16” (78 mm).

BLADE STOP SPACER, 4040XP-61 required to lower parallel arm shoe to clear 1/2” (13 mm) blade stop.

PA FLUSH PANEL ADAPTER, 4040XP-419 provides horizontal mounting surface for parallel arm shoe on single rabetted or flush frame.

AUXILIARY SHOE, 4040XP-62A requires a top rail of 7” (178 mm). Optional shoe replaces -62PA for parallel arm mounting of regular arm with overhead holder/stop.

62A

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

HOW-TO-ORDER

4040XP SERIES CLOSERS

1. SELECT FINISH.

Standard Powder Coat __________ Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.

Closer will be shipped with:

- STANDARD CLIP-ON COVER

- SPECIFY ARM WHEN ORDERING

- SELF-REAMING and TAPPING SCREWS, unless options listed below are selected.

CLOSER OPTIONS

CYLINDER

Delayed Action (4041 DEL)

COVER

Metal (specify right or left hand) (MC)

FINISH

Custom Powder Coat (RAL) ___________ (handed metal cover required) Plated Finish, US ______________ (handed metal cover required) SRI primer (not available with Plated Finish)

ARM

Regular (REG) Regular w/62PA (Rw/PA) Regular w/62A (R/62A) Long (LONG) Extra Long (XLONG) Hold-Open (H) Hold-Open w/62PA (Hw/PA) Long Hold-Open (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Open Extra Duty Arm (HEDA) (Handed) Hold Open Extra Duty Arm with 62G (HEDA/62G) (Handed) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Spring Cush (SCUSH) Spring HCush (SHCUSH)

OPTIONAL SCREW PACKS

TB* w/Self-Reaming and Tapping (TBSRT) Wood & Machine Screw (WMS) TB*, Wood & Machine Screw (TBWMS) TORX Machine Screw (TORX) TB* & TORX Machine Screw (TBTRX)

* Specify door thickness if other than 1 3/4”.

INSTALLATION ACCESSORIES

Plate, 4040XP-18 Plate, 4040XP-18TJ Plate, 4040XP-18G Plate, 4040XP-18PA CUSH Shoe Support, 4040XP-30 Blade Stop Spacer, 4040XP-61 Auxiliary Shoe, 4040XP-62A PA Flush Panel Adapter, 4040XP-419

SPECIAL TEMPLATE

ST- ________

OR

DE

RIN

GI

NF

OR

MA

TIO

N

Indicates recommended range of door width for closer size.

TABLE OF SIZES

4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3.

Closing power of 4040XP series closers may be adjusted 50%.

REDUCED OPENING FORCE 4040XP SERIES CLOSERS

CAUTION! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.

Refer to POWER OPERATORS section for information on systems that meet reduced opening force requirements without effecting closing power.

* Maximum opening force size 3 size 4 size 5 size 6

*4040XP

EXTERIOR (and VESTIBULE) DOOR WIDTH

24" 610mm

30" 762mm

36" 914mm

42" 1067mm

INTERIOR DOOR WIDTH

48" 1219mm

24" 610mm

34" 864mm

38" 965mm

48" 1219mm

54" 1372mm

60" 1524mm size 2 size 3 size 4 size 5 size 6

*4040XP

* Adjustable Size 1 thru 6

DOOR WIDTH 36" 42" 48"

8.5* lbs. 4040XP 4040XP 4040XP

5.0* lbs. 4040XP 4040XP 4040XP

Minimum Door Width

Minimum Door Width

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

Notes

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011