36C25918R0278-007.pdf

Grand Junction VAMC April 6th, 2018 Elimination of Substandard Beds 3 rd floor ADDENDUM #1 Grand Junction, CO 81501 Project No. 575-13-101

SCHEDULE FOR FINISHES

09 06 00 - 2

SECTION 09 06 00

PART I – GENERAL

1.1 DESCRIPTION

This section contains a coordinated system in whic h requirements for materials specified in other sections shown are identified by abbreviated materi al names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equi valent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of t echnical specifications will be acceptable upon approval in writing by contracting officer for fini sh requirements.

1.3 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this sp ecification to the extent referenced. Publications are referenced in text by basic designation only.

B. MASTER PAINTING INSTITUTE: (MPI)

2001....................Architectural Painting Spec ification Manual

PART 2- PRODUCTS

2.1 DIVISION 05 – METALS

A. SECTION 05 73 00, ORNAMENTAL METAL, MP-1

Item Finish

MP-1: NOT USED

MP-2: Metal Cove, Schluter Systems Inc. Dilex – EBH K U11/O11, Brushed Stainless Steel 304

09 06 00 - 3

2.2 DIVISION 06 WOOD, PLASTICS, AND COMPOSITES

A. SECTION 06 20 00, FINISH CARPENTRY

1. PLASTIC LAMINATE

Component Manufacturer Description / Model Color Te xture

PLAM-1 Formica Plastic Laminate / “Patterns” Design

Group

#6212 Wheat Strand 58-Matte

2. SOLID SURFACES

Component Manufacturer Description / Model Color Te xture

SLD-1 Not Used

SLD-2 Formica Solid Surface Solid Polymer / Designer Series, 1/2”

#900, Pearl Mica Polished

SLD-3 Dupont Solid Surface Corian, 1/2” Fossil Poli shed

2.3 DIVISION 07 - THERMAL AND MOISTURE PROTECTION

A. SECTION 07 92 00, JOINT SEALANTS

Location Color Manufacturer Manufacturer Color

Casework to Wall Clear

Door frame to Painted Wall Match wall paint color

Wall Mounted Devices Match Wall Paint Color

09 06 00 - 4

Wood to other Material Clear

Plumbing fixtures Clear

2.4 DIVISION 08 - OPENINGS

A. SECTION 08 11 13, HOLLOW METAL DOORS AND FRAMES

Paint both sides of frames same color

Component Color of Paint

Frame PT-6

B. SECTION 08 14 00, WOOD DOORS

Component Finish/Color

Doors Natural Stain

C. SECTION 08 31 13, ACCESS DOORS AND FRAMES

Material Finish/Color

Steel Paint – match adjacent color

Stainless steel Brushed

D. SECTION 08 71 00, BUILDERS HARDWARE

Item Material Finish

09 06 00 - 5

Hinges Satin Nickel

Door Closers Satin Nickel

Closer/ Holder Satin Nickel

Stops Satin Nickel

Lock/ Latches Satin Nickel

Kick Mop Plates Metal Satin Nickel

Exit Device Satin Nickel

Flush Bolts Satin Nickel

Door Pulls Satin Nickel

Push Plates Satin Nickel

Combination Push Pull Plate Satin Nickel

Coordinators Satin Nickel

E. SECTION 08 81 13, DECORATIVE GLASS GLAZING

Glazing Type Manufacturer Mfg. Color Name/No.

G-1 Berman Glass / Arc-Com Fabrics Woven Connection s, Riveria #AC-68874, River #5

G-2 Berman Glass / Arc-Com Fabrics Woven Connection s, Riveria #AC-68873, Terracotta #4

2.5 DIVISION 09 - FINISHES

A. SECTION 09 30 13, CERAMIC TILING

09 06 00 - 6

1. GLAZED PORCELAIN TILE

Finish Code Manufacturer Mfg. Color Name/No Size

CT-1a Replace with RT-3

CT-1b Replace with PT-3

CT-1c Replace with RB-1

CT-2a Replace with RT-3

CT-2b Replace with PT-3

CT-2c Replace with RB-1

2. MARBLE MOSAIC TILE

Finish Code Manufacturer Mfg. Color Name/No Size

CT-3 Not Used

CT-4 Not Used

CT-5 Not Used

CT-6 Not Used

CT-7 Not Used

CT-8 Replace with RB-1

3. TILE GROUT

09 06 00 - 7

Finish Code Manufacturer Mfg. Color Name/No.

G-1, G-2 Mapei #93 Warm Gray

B. SECTION 09 51 00, ACOUSTICAL CEILINGS

Finish Code Component Color Pattern Manufacturer Mf g Name/No.

ACT-1 Type IV White Armstrong Ultima, Health Zone

C. SECTION 09 65 19, RESILIENT FLOORING

Finish Code Location Material/Component Manufacture r Mfg Name/No.

RT-1 Patient Rooms Vinyl Sheet Mohawk Calmness - C2 023 Series, 949 Harmony

RT-2 Corridor Vinyl Sheet Mohawk Calmness - C2023 Series, 131 Savor

RT-3 Replaces CT-1a & CT-2a Restrooms, tub & shower rooms

Vinyl Sheet Lonseal LONSPECK TOPSEAL SX116 White pepper

D. SECTION 09 65 13, RESILIENT BASE

Finish Code Item Height Manufacturer Mfg Name/No.

RB-1 Rubber Base (RB) 4” Roppe #140 Fawn

09 06 00 - 8

E. SECTION 09 68 00, CARPET MODULES (CFT)

Finish Code Size Pattern Manufacturer Mfg. Color N ame/No.

CPT-1 Replace with RT-2

F. SECTION 09 77 20, FIBERGLASS REINFORCED PANELS

1. FIBERGLASS REINFORCED PANELS, FRP-1

Location Finish Manufacturer Mfg. Color Name/No.

Janitor Closet mop sink Smooth Marlite Light Gray / #P-151

G. SECTION 09 91 00, PAINT AND COATINGS

1. MPI Gloss and Sheen Standards Gloss @60 Sh een @85

Gloss Level 1 a traditional matte finish-flat max 5 units, and max 10 units

Gloss Level 4 a “satin-like” finish 20-35 units, and min. 35 units

1. Paint code Gloss Manufacturer Mfg. Color Name/No .

PT-1 Flat Sherwin Williams #7005 Pure White

PT-2 Satin Sherwin Williams #6106 Kilim Beige

PT-3 Satin Sherwin Williams #6107 Nomadic Desert

PT-4 Satin Sherwin Williams #7727 Koi Pond

PT-5 Satin Sherwin Williams #7616 Breezy

PT-6 Satin Sherwin Williams #2808 Rookwood Dark Bro wn

PT-7 Satin Sherwin Williams #6108 Latte

09 06 00 - 9

2. Stain Code (S) Gloss and Transparency Manufactur er Mfg. Color Name/No.

NOT USED

2.6 DIVISION 10 - SPECIALTIES

A. SECTION 10 21 23, CUBILCE CURTAINS TRACKS

Finish Code Manufacturer Mfg. Color Name/No.

Privacy Curtain Maharam Fabrics / Buoyant #511280 # 001 Honey

B. SECTION 10 26 00, Handrail/WALL GUARDS AND CORNE R GUARDS

Item Material Manufacturer Mfg. Color Name/No.

CG-1: Corner Guards Vinyl, G-100 series Koroguard W all Protection Koroguard - Cashmere

CG-2: Corner Guards Vinyl, G-100 series Koroguard W all Protection Koroguard - Cashmere

HR-1: Hand rail Laminate and Koroguard

- Oval Handrail

Koroguard Wall Protection Koroguard - Cashmere

2.7 DIVISION 12- FURNISHINGS

A. SECTION 12 24 00, WINDOW SHADES

Component Material Manufacturer Mfg. Color Name/No.

Roller Shades Polyester with Acrylic Flocked Backing

Phifer Style 7000 P63 Birch

09 06 00 - 10

PART III EXECUTION

3.1 FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

FINISH SCHEDULE & MISCELLANEOUS ABBREVIATIONS

Term Abbreviation

Acoustical Ceiling AT Carpet Module Tile CPT Ceramic Mosaic Tile FTCT

Existing E Gypsum Wallboard GWB Plastic Laminate HPDL Rubber Base RB Vinyl Composition Tile VCT Wood WD

--- E N D---