14106 Drawings.pdf
PDF 5 MB Posted
- Solicitation number
- S-29100-00014106
- Issued by
- Union County, Oregon
About this file
The document is a set of detailed refrigeration equipment replacement design and specification drawings for the Two Rivers Correctional Institution (TRCI) in Umatilla, Oregon, prepared by MFA Inc. and OmniTeam Inc. The project involves a comprehensive replacement of cooler and freezer refrigeration equipment, including removing and replacing evaporator coils, single compressor packs, refrigerant line sets, condenser drain lines, and heat trace on freezer drains. The scope of work includes mechanical and electrical components, such as disconnecting and reconnecting evaporator coils and compressor racks, and pouring a new concrete pad for compressor racks.
The drawings provide extensive technical specifications for two separate refrigeration systems - one for the cooler and one for the freezer - using OmniTemp refrigeration racks. The equipment specifications include detailed electrical requirements (460V/3ph and 208V/1ph), compressor and coil details, refrigerant type (R-454c), and system design features like a KE2 defrost system, leak detector, and redundant "flip-flop" compressor runtime configuration. The project involves replacing existing refrigeration infrastructure with new, more efficient equipment, with careful attention to electrical connections, piping, and installation requirements at the correctional facility.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PW25022_LaneCounty_AdvertisementForBid_WMD Short Mountain Landfill Truck Scale.pdf | ||
| 14106 Plan Holder List .pdf | ||
| 7034 NOIA.pdf | ||
| 14106 Addenda 1.pdf | ||
| 14106 Bid Tab.pdf | ||
| 14106 Specs.pdf | ||
| 14106 ITB TCS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TWO RIVERS CORRECTIONAL INSTITUTION
Oregon Department of Corrections
82911 Beach Access Rd, Umatilla Oregon 97882
Cooler & Freezer Equipment Replacement
AutoCAD SHX Text DRAWING INDEX: M0.0 COVER SHEET & SCOPE OF WORK COVER SHEET & SCOPE OF WORK M2.0 MECHANICAL PLAN MECHANICAL PLAN M6.0 MECHANICAL SCHEDULES & DETAILS MECHANICAL SCHEDULES & DETAILS REF OMNI TEAM REFERENCE SHOP DRAWINGS OMNI TEAM REFERENCE SHOP DRAWINGS E2.0 ELECTRICAL FLOOR PLANS ELECTRICAL FLOOR PLANS E2.1 ELECTRICAL ONE-LINEELECTRICAL ONE-LINE
AutoCAD SHX Text PROJECT SCOPE OF WORK MECHANICAL: REMOVE AND REPLACE EVAPORATOR COILS IN COOLER AND FREEZER REMOVE AND REPLACE SINGLE COMPRESSOR RACK WITH NEW COOLER AND FREEZER RACK REMOVE AND REPLACE ALL REFRIGERANT LINE SETS REMOVE AND REPLACE ALL CONDENSATE DRAINS LINES REMOVE, AND REINSTALL HEAT TRACE ON FREEZER DRAINS. ELECTRICAL: DISCONNECT AND RECONNECT EVAPORATOR COILS AND COMPRESSOR RACK. X CONCRETE POUR NEW CONCRETE PAD FOR DUEL COMPRESSOR RACKS.
AutoCAD SHX Text
OF
AutoCAD SHX Text
SHEET
AutoCAD SHX Text Proj No:
AutoCAD SHX Text Date:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text DSGN By:
AutoCAD SHX Text Chkd By:
AutoCAD SHX Text Acad File:
AutoCAD SHX Text
PHN: (503) 234-0548
AutoCAD SHX Text
WWW.MFIA-ENG.COM
AutoCAD SHX Text
FAX: (503) 234-0677
AutoCAD SHX Text Consulting Engineers
AutoCAD SHX Text Portland, OR 97214
AutoCAD SHX Text 2007 S.E. Ash St.
AutoCAD SHX Text
TWO RIVERS CORRECTIONAL INSTITUTION - COOLER & FREEZER EQUIPMENT REPLACEMENT
AutoCAD SHX Text
OREGON DEPARTMENT OF CORRECTIONS
AutoCAD SHX Text
82911 BEACH ACCESS ROAD
AutoCAD SHX Text
UMATILLA
AutoCAD SHX Text
OREGON 97882
AutoCAD SHX Text 5-19-25
AutoCAD SHX Text 10732
AutoCAD SHX Text
MD
AutoCAD SHX Text
MD
AutoCAD SHX Text
MD
AutoCAD SHX Text 5-19-25
AutoCAD SHX Text
AutoCAD SHX Text M0.0
AutoCAD SHX Text
AutoCAD SHX Text
COVER SHEET & SCOPE OF WORK
P L
A N
V
I E
W
P
L
A
N
V
I
E
W
AutoCAD SHX Text
FWH15.1
AutoCAD SHX Text
STORAGE
AutoCAD SHX Text
FWH13.1
AutoCAD SHX Text
TOILET
AutoCAD SHX Text
STAFF
AutoCAD SHX Text
FWH14.1
AutoCAD SHX Text
ROOM
AutoCAD SHX Text
BREAK
AutoCAD SHX Text
FWH16.1
AutoCAD SHX Text
RECYCLE
AutoCAD SHX Text
GARBAGE/
AutoCAD SHX Text
FWH12.1
AutoCAD SHX Text
FOREMAN
AutoCAD SHX Text
FWH07.1
AutoCAD SHX Text
CANTEEN
AutoCAD SHX Text
FWH06.1
AutoCAD SHX Text
ELECTRICAL
AutoCAD SHX Text
FWH09.1
AutoCAD SHX Text
COOLER
AutoCAD SHX Text
FWH08.1
AutoCAD SHX Text
FREEZER
AutoCAD SHX Text
FWH03.1
AutoCAD SHX Text
TOILET
AutoCAD SHX Text
INMATE
AutoCAD SHX Text
FWH04.1
AutoCAD SHX Text
JANITOR
AutoCAD SHX Text
FWH10.1
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
FWH05.1
AutoCAD SHX Text
MEDICAL
AutoCAD SHX Text
REF.
AutoCAD SHX Text F
AutoCAD SHX Text
RFI #2840
AutoCAD SHX Text
17'-0" (204") CURB
AutoCAD SHX Text
16'-0" (192") RACK
AutoCAD SHX Text
5'-0" CURB
AutoCAD SHX Text
STANDARD BOLT DOWN BRACKETS ( 6 TYPICAL)
AutoCAD SHX Text
ELECTRICAL PANEL
AutoCAD SHX Text 4'-6" (54") O.D.
AutoCAD SHX Text
MAIN DISCONNECT
AutoCAD SHX Text
4'-0" (48") RACK
AutoCAD SHX Text
17'-0" (204") CURB
AutoCAD SHX Text
16'-0" (192") RACK
AutoCAD SHX Text
5'-0" CURB
AutoCAD SHX Text
STANDARD BOLT DOWN BRACKETS ( 6 TYPICAL)
AutoCAD SHX Text
ELECTRICAL PANEL
AutoCAD SHX Text 4'-6" (54") O.D.
AutoCAD SHX Text
MAIN DISCONNECT
AutoCAD SHX Text
4'-0" (48") RACK
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text CONTRACTOR TO PROVIDE CONCRETE PAD OR PADS THAT ARE MIN OF 12'' WIDER AND LONGER THAN THE COMPRESSOR RACKS. CONTRACTOR TO PROVIDE ONE LARGE OR TWO SEPARATE PADS FOR THE NEW COMPRESSOR RACKS, COORDINATE EXACT POSITION WITH ODOC STAFF.
AutoCAD SHX Text COORDINATE REFRIGERANT PIPE ROUTING WITH EXISTING STRUCTURE. SEAL ALL ENVELOPE PENETRATIONS IN A WATER TIGHT MANOR. SUPPORT ALL PIPING PER BUILDING/MECHANICAL CODE. PROVIDE WEATHER PROOF METAL JACKETING AN ALL EXPOSED PIPES AND INSULATE PER CODE AND STANDARD BUILDING PRACTICES.
AutoCAD SHX Text
(E) COMPRESSOR RACK TO BE REMOVED
AutoCAD SHX Text SHEET NOTES: REMOVE EXISTING FAN COIL, CONDENSATE DRAINS & REFRIGERANT LINE SETS. CONTRACTOR TO INSTALL ALL NEW CONDENSATE DRAIN SYSTEM (FOLLOWING PATH OF EXISTING - ENSURE ALL CONDENSATE IN FREEZER IS FULLY HEAT TRACED. CONTRACTOR TO INSTALL ALL NEW REFRIGERANT PIPING, SIZED PER MANUFACTURES GUIDELINES.
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text A
AutoCAD SHX Text CONNECT EACH EVAPORATOR CONDENSATE DRAIN (TYP OF 4) TO NEW CONDENSATE DRAIN PIPING. CONTRACTOR TO REPLACE CONDENSATE DRAIN PIPING, FOLLOWING EXISTING ROUTE, BUT ENSURING SLOPE.
AutoCAD SHX Text PROVIDE ALL CONTROLS & TEMP SENSORS AS NEEDED FOR A STAND ALONE REFRIGERATION SYSTEM
AutoCAD SHX Text C
AutoCAD SHX Text C
AutoCAD SHX Text FLIP FLOP CONTROLLER (REDUNDANT SYSTEM CONTROLLER). 120 V CONNECTION. TYPICAL OF TWO (FREEZER AND COOLER) CONTROLS TO BE CONNECTED TO BUILDING DDC/BAS AT A FUTURE TIME.
AutoCAD SHX Text 4 SETS OF REFRIGERANT PIPING (APPROX 2-1/8'') FROM EACH EVAPORATOR TO EACH COMPRESSOR IN THE COMPRESSOR RACK
AutoCAD SHX Text 4 SETS OF REFRIGERANT PIPING (APPROX 1-3/8'') FROM EACH EVAPORATOR TO EACH COMPRESSOR IN THE COMPRESSOR RACK.
AutoCAD SHX Text
CENTRAL REFRIGERATOR
AutoCAD SHX Text
BULK FREEZER
AutoCAD SHX Text
SCALE:1/8''=1'-0''
AutoCAD SHX Text
COOLER & FREEZER PLAN
AutoCAD SHX Text M2.0
AutoCAD SHX Text
AutoCAD SHX Text CONNECT EACH EVAPORATOR CONDENSATE DRAIN (TYP OF 4) TO NEW CONDENSATE DRAIN PIPING. CONTRACTOR TO REPLACE CONDENSATE DRAIN PIPING, FOLLOWING EXISTING ROUTE, BUT ENSURING SLOPE.
AutoCAD SHX Text TYPICAL 3/4'' CONDENSATE DRAIN CONNECTION. ENSURE ALL DRAINS IN FREEZER ARE HEAT TRACED
AutoCAD SHX Text
ELECT COMPARTMENT-RIGHT SIDE
AutoCAD SHX Text
PIPE COMPARTMENT- LEFT SIDE
AutoCAD SHX Text
MIN CLEARANCE TO BACK WALL (TYPICAL), SEE
AutoCAD SHX Text
AutoCAD SHX Text M6.0
AutoCAD SHX Text
EXISTING PAD FOR COMPRESSOR RACK
AutoCAD SHX Text
UNITS TO BE DESIGNED SO HOT SIDE (DISCHARGE AIR SIDE) FACES EACH OTHER
AutoCAD SHX Text
OF
AutoCAD SHX Text
SHEET
AutoCAD SHX Text Proj No:
AutoCAD SHX Text Date:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text DSGN By:
AutoCAD SHX Text Chkd By:
AutoCAD SHX Text Acad File:
AutoCAD SHX Text
PHN: (503) 234-0548
AutoCAD SHX Text
WWW.MFIA-ENG.COM
AutoCAD SHX Text
FAX: (503) 234-0677
AutoCAD SHX Text Consulting Engineers
AutoCAD SHX Text Portland, OR 97214
AutoCAD SHX Text 2007 S.E. Ash St.
AutoCAD SHX Text
TWO RIVERS CORRECTIONAL INSTITUTION - COOLER & FREEZER EQUIPMENT REPLACEMENT
AutoCAD SHX Text
OREGON DEPARTMENT OF CORRECTIONS
AutoCAD SHX Text
82911 BEACH ACCESS ROAD
AutoCAD SHX Text
UMATILLA
AutoCAD SHX Text
OREGON 97882
AutoCAD SHX Text 5-19-25
AutoCAD SHX Text 10732
AutoCAD SHX Text
MD
AutoCAD SHX Text
MD
AutoCAD SHX Text
MD
AutoCAD SHX Text 5-19-25
AutoCAD SHX Text
AutoCAD SHX Text M2.0
AutoCAD SHX Text
MECHANICAL FLOOR PLAN
AutoCAD SHX Text
MOTOR HP -QUANTITY
AutoCAD SHX Text
FLA/MCA (AMPS)
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
EC MOTOR
AutoCAD SHX Text
FINS PER INCH
AutoCAD SHX Text
DEFROST
AutoCAD SHX Text
REFRIGERANT
AutoCAD SHX Text
NUMBER
AutoCAD SHX Text
COMPRESSOR
AutoCAD SHX Text
CAPACITY (AT 95%%D AMBIENT & 35%%D COOLER TEMP) *
AutoCAD SHX Text
COOLER-RACK C/D
AutoCAD SHX Text
NUMBER
AutoCAD SHX Text
EVAPORATOR
AutoCAD SHX Text
68 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
7000 CFM
AutoCAD SHX Text
1/2- TWO
AutoCAD SHX Text 8.4/15
AutoCAD SHX Text
BASIS OF DESIGN KEEPRITE REFRIGERATION
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text
SUCTION LINE SIZE
AutoCAD SHX Text
PRIMARY/BACKUP **
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text 1-3/8''
AutoCAD SHX Text
350 LBS
AutoCAD SHX Text
KEP-068-MA-S2-D-KE2
AutoCAD SHX Text
EXTENDED PROFILE CEILING HUNG
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text C-1
AutoCAD SHX Text
COMP
AutoCAD SHX Text C-1
AutoCAD SHX Text
EVAPORATOR
AutoCAD SHX Text
VOLTAGE
AutoCAD SHX Text 208/1
AutoCAD SHX Text X
AutoCAD SHX Text
RACK SIZE
AutoCAD SHX Text
SUCTION TEMP
AutoCAD SHX Text
COMPRESSOR RLA
AutoCAD SHX Text
COMPRESSOR HP
AutoCAD SHX Text
DEFROST ***
AutoCAD SHX Text
REFRIGERANT
AutoCAD SHX Text
CAPACITY (AT 95%%D AMBIENT & 35%%D COOLER TEMP) *
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
15.3 AMPS
AutoCAD SHX Text 25%%D F
AutoCAD SHX Text
BASIS OF DESIGN:
AutoCAD SHX Text
COMPRESSOR MODEL
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text
PRIMARY/BACKUP **
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text
4DES-7-4SU-OY
AutoCAD SHX Text
STYLE
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text
COMPRESSOR
AutoCAD SHX Text
VOLTAGE ++
AutoCAD SHX Text 460/3
AutoCAD SHX Text
* - COOLER BOX IS 50'-9'' (L) X 35'-0'' (W) X 18'-0'' (H) AND REQUIRES A MINIMUM CAPACITY OF 124 MBH OF REFRIGERATION. ** - SYSTEM TO BE PROVIDED WITH A FULLY REDUNDANT REFRIGERATION SYSTEM, INCLUDING REDUNDANT COMPRESSORS, EVAPORATORS, REFRIGERANT PIPING AND CONTROLS. C-1 AND D-1 TO RUN TOGETHER, AND C-2 AND D-2 TO RUN TOGETHER CONTROLS TO BE SET TO BRING ON STAND-BY SYSTEM IF PRIMARY FAILS, AND TO SWITCH PRIMARY/SECONARY ORDER ONCE PER DAY. *** - PROVIDE SYSTEM TIME CLOCK TO CONTROL AIR DEFROST CYCLE, PROVIDE TWO TIME CLOCKS ONE TO RUN A CIRCUITS AND ONE TO RUN B CIRCUITS. **** - PROVIDE ALL CONTROLS NECESSARY FOR SYSTEM TO OPERATE AS A STAND ALONE COOLER/FREEZER SYSTEM. ++ - COMPRESSOR RACK TO HAVE A SINGLE POINT ELECTRICAL CONNECTION AND INCLUDE INTERNAL TRANSFORMER AND ALL INTERNAL WIRING TO COMPRESSORS, CONDENSING FANS, CONTROLS, INTERNAL SAFETIES OVERCURRENT PROTECTION AND CONTROLS AND SAFETIES FOR "FLIP FLOP" REDUNDANT COMPRESSORS. +++ - PROVIDE WITH KE2 DEFROST CONTROLS AND ALLOW FOR FUTURE CONNECTION TO BUILDING BAS/DDC SYSTEM
AutoCAD SHX Text
68 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
7000 CFM
AutoCAD SHX Text
1/2- TWO
AutoCAD SHX Text 8.4/15
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text 1-3/8''
AutoCAD SHX Text
350 LBS
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text D-1
AutoCAD SHX Text
COMP
AutoCAD SHX Text D-1
AutoCAD SHX Text 208/1
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
15.3 AMPS
AutoCAD SHX Text 25%%D F
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text
5000 LBS
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text 460/3
AutoCAD SHX Text
68 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
7000 CFM
AutoCAD SHX Text
1/2- TWO
AutoCAD SHX Text 8.4/15
AutoCAD SHX Text
SECONDARY
AutoCAD SHX Text 1-3/8''
AutoCAD SHX Text
350 LBS
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text C-2
AutoCAD SHX Text
COMP
AutoCAD SHX Text C-2
AutoCAD SHX Text 208/1
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
15.3 AMPS
AutoCAD SHX Text 25%%D F
AutoCAD SHX Text
SECONARY
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text 460/3
AutoCAD SHX Text
68 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
7000 CFM
AutoCAD SHX Text
1/2- TWO
AutoCAD SHX Text 8.4/15
AutoCAD SHX Text
SECONDARY
AutoCAD SHX Text 1-3/8''
AutoCAD SHX Text
650 LBS
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text D-2
AutoCAD SHX Text
COMP
AutoCAD SHX Text D-2
AutoCAD SHX Text 208/1
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ON/OFF
AutoCAD SHX Text
AutoCAD SHX Text
15.3 AMPS
AutoCAD SHX Text 25%%D F
AutoCAD SHX Text
SECONARY
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text 460/3
AutoCAD SHX Text
CONTROLS +++
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
4DES-7-4SU-OY
AutoCAD SHX Text
4DES-7-4SU-OY
AutoCAD SHX Text
4DES-7-4SU-OY
AutoCAD SHX Text
OT2D8-AC-H-4-0-3-454
AutoCAD SHX Text 192'' X 48'' X 88''
AutoCAD SHX Text
MOTOR HP - QUANTITY
AutoCAD SHX Text
FLA (AMPS)
AutoCAD SHX Text
AIR FLOW
AutoCAD SHX Text
EC MOTOR
AutoCAD SHX Text
FINS PER INCH
AutoCAD SHX Text
DEFROST - ELECTRIC HEAT
AutoCAD SHX Text
REFRIGERANT
AutoCAD SHX Text
NUMBER
AutoCAD SHX Text
COMPRESSOR
AutoCAD SHX Text
CAPACITY (AT 95%%D AMBIENT & 35%%D COOLER TEMP) *
AutoCAD SHX Text
FREEZER-RACK C/D
AutoCAD SHX Text
NUMBER
AutoCAD SHX Text
EVAPORATOR
AutoCAD SHX Text
60 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text 8837 W
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
6900 CFM
AutoCAD SHX Text
1.0-TWO
AutoCAD SHX Text
5.0 + 11.7 (HEATER)
AutoCAD SHX Text
BASIS OF DESIGN KEEPRITE REFRIGERATION
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text
SUCTION LINE SIZE
AutoCAD SHX Text
PRIMARY/BACKUP **
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text 2-1/8''
AutoCAD SHX Text
360 LBS
AutoCAD SHX Text
KEP-060-LE-T4D-KE2
AutoCAD SHX Text
EXTENDED PROFILE CEILING HUNG
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text A-1
AutoCAD SHX Text
COMP
AutoCAD SHX Text A-1
AutoCAD SHX Text
EVAPORATOR
AutoCAD SHX Text
VOLTAGE
AutoCAD SHX Text 460/3
AutoCAD SHX Text X
AutoCAD SHX Text X
AutoCAD SHX Text
SUCTION TEMP
AutoCAD SHX Text
COMPRESSOR RLA
AutoCAD SHX Text
COMPRESSOR HP
AutoCAD SHX Text
DEFROST ***
AutoCAD SHX Text
REFRIGERANT
AutoCAD SHX Text
CAPACITY (AT 95%%D AMBIENT & -15%%D COOLER TEMP) *
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ELECT
AutoCAD SHX Text
AutoCAD SHX Text
28.8 AMPS
AutoCAD SHX Text -20%%D F
AutoCAD SHX Text X
AutoCAD SHX Text
BASIS OF DESIGN:
AutoCAD SHX Text
COMPRESSOR MODEL
AutoCAD SHX Text
WEIGHT
AutoCAD SHX Text
PRIMARY/BACKUP **
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text
4GE-23-4PU-OY
AutoCAD SHX Text
STYLE
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text
COMPRESSOR
AutoCAD SHX Text
VOLTAGE ++
AutoCAD SHX Text 460/3
AutoCAD SHX Text
* -FREEZER BOX IS 50'-9'' (L) X 33'-7'' (W) X 18'-0'' (H) AND REQUIRES A MINIMUM CAPACITY OF 124 MBH OF REFRIGERATION. ** - SYSTEM TO BE PROVIDED WITH A FULLY REDUNDANT REFRIGERATION SYSTEM, INCLUDING REDUNDANT COMPRESSORS, EVAPORATORS, REFRIGERANT PIPING AND CONTROLS. A-1 AND B-1 TO RUN TOGETHER, AND A-2 AND B-2 TO RUN TOGETHER CONTROLS TO BE SET TO BRING ON STAND-BY SYSTEM IF PRIMARY FAILS, AND TO SWITCH PRIMARY/SECONARY ORDER ONCE PER DAY. *** - PROVIDE CONTROLS TO OPERATE ELECTRIC DEFROST CYCLE. **** - PROVIDE ALL CONTROLS NECESSARY FOR SYSTEM TO OPERATE AS A STAND ALONE COOLER/FREEZER SYSTEM. - PROVIDE ALL CONTROLS NECESSARY FOR SYSTEM TO OPERATE AS A STAND ALONE COOLER/FREEZER SYSTEM. ++ - COMPRESSOR RACK TO HAVE A SINGLE POINT ELECTRICAL CONNECTION AND INCLUDE INTERNAL TRANSFORMER AND ALL - COMPRESSOR RACK TO HAVE A SINGLE POINT ELECTRICAL CONNECTION AND INCLUDE INTERNAL TRANSFORMER AND ALL INTERNAL WIRING TO COMPRESSORS, CONDENSING FANS, CONTROLS, INTERNAL SAFETIES OVERCURRENT PROTECTION AND CONTROLS AND SAFETIES FOR "FLIP FLOP" REDUNDANT COMPRESSORS. +++ - PROVIDE WITH KE2 DEFROST CONTROLS AND ALLOW FOR FUTURE CONNECTION TO BUILDING BAS/DDC SYSTEM- PROVIDE WITH KE2 DEFROST CONTROLS AND ALLOW FOR FUTURE CONNECTION TO BUILDING BAS/DDC SYSTEM
AutoCAD SHX Text
60 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text 8837 W
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
6900 CFM
AutoCAD SHX Text
1.0-TWO
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text B-1
AutoCAD SHX Text
COMP
AutoCAD SHX Text B-1
AutoCAD SHX Text 460/3
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ELECT
AutoCAD SHX Text
AutoCAD SHX Text
28.8 AMPS
AutoCAD SHX Text -20%%D F
AutoCAD SHX Text X
AutoCAD SHX Text
PRIMARY
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text 460/3
AutoCAD SHX Text
60 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text 8837 W
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
6900 CFM
AutoCAD SHX Text
1.0-TWO
AutoCAD SHX Text
SECONARY
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text A-2
AutoCAD SHX Text
COMP
AutoCAD SHX Text A-2
AutoCAD SHX Text 460/3
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ELECT
AutoCAD SHX Text
AutoCAD SHX Text
28.8 AMPS
AutoCAD SHX Text -20%%D F
AutoCAD SHX Text X
AutoCAD SHX Text
SECONARY
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text 460/3
AutoCAD SHX Text
60 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text 8837 W
AutoCAD SHX Text
AutoCAD SHX Text
YES
AutoCAD SHX Text
6900 CFM
AutoCAD SHX Text
1.0-TWO
AutoCAD SHX Text
SECONDARY
AutoCAD SHX Text
HORIZ. DISCHARGE
AutoCAD SHX Text
EVAP
AutoCAD SHX Text B-2
AutoCAD SHX Text
COMP
AutoCAD SHX Text B-2
AutoCAD SHX Text 460/3
AutoCAD SHX Text
62 MBH
AutoCAD SHX Text R-454C
AutoCAD SHX Text
ELECT
AutoCAD SHX Text
AutoCAD SHX Text
28.8 AMPS
AutoCAD SHX Text -20%%D F
AutoCAD SHX Text X
AutoCAD SHX Text
SECONARY
AutoCAD SHX Text
CUSTOM RACK
AutoCAD SHX Text 460/3
AutoCAD SHX Text
5.0 + 11.7 (HEATER)
AutoCAD SHX Text
5.0 + 11.7 (HEATER)
AutoCAD SHX Text
5.0 + 11.7 (HEATER)
AutoCAD SHX Text 2-1/8''
AutoCAD SHX Text 2-1/8''
AutoCAD SHX Text 2-1/8''
AutoCAD SHX Text
360 LBS
AutoCAD SHX Text
360 LBS
AutoCAD SHX Text
360 LBS
AutoCAD SHX Text
CONTROLS +++
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text
KE2 DEFROST
AutoCAD SHX Text 192'' X 48'' X 88''
AutoCAD SHX Text
6500 LBS
AutoCAD SHX Text
4GE-23-4PU-OY
AutoCAD SHX Text
4GE-23-4PU-OY
AutoCAD SHX Text
4GE-23-4PU-OY
AutoCAD SHX Text
OT2DX8-AC-H-4-0-3-454
AutoCAD SHX Text BASIS OF DESIGN & SYSTEM DESIGN REQUIREMENTS: THE FOLLOWING INFORMATION FROM OMNI-TEAM WAS USED AS THE BASIS OF DESIGN. THE BASIS OF DESIGN USES INDEPENDENT REFRIGERANT CIRCUITS - ONE COMPRESSOR PER EVAPORATOR WITH A COMPLETELY SEPARATE REDUNDANT COMPRESSOR/EVAPORATOR (2 OF EACH PER COOLER BOX). OTHER OPTIONS ARE ACCEPTABLE AS LONG AS THE SYSTEM HAS REDUNDANT COMPRESSORS. DESIGN REQUIREMENTS: PROVIDE REPLACEMENT REFRIGERATION SYSTEM CONSISTING OF THE FOLLOWING: TWO STAND-ALONE SYSTEMS (COOLER AND FREEZER) CEILING HUNG EVAPORATORS CUSTOM BUILT COMPRESSOR RACK WITH MULTIPLE COMPRESSORS AND A FULLY REDUNDANT COMPRESSOR SYSTEM. AUTOMATIC CHANGER OVER BETWEEN PRIMARY AND SECONDARY COMPRESSORS ALL ELECTRICAL INPUTS TO BE 460V (EXCEPT FOR EVAPORATORS AS SHOWN). ALL CONTROLS, SAFETIES AND SENSORS FOR A FULLY OPERATIONAL SYSTEM. CONTRACTOR TO PROVIDE COMPLETE REFRIGERATION SYSTEM TO COOL EXISTING COOLER AND FREEZER BOXES. CONTRACTOR RESPONSIBLE FOR VERIFYING ALL EXISTING SITE CONDITIONS, AND COOLER/FREEZER BOX CONSTRUCTION. SYSTEM TO CONTAIN DRY CONTACTS AS INDICATED ON REFERENCE DRAWINGS FOR FUTURE CONNECTION BY ODOC STAFF TO FACILITY DDC SYSTEM.
AutoCAD SHX Text SEE REFERENCE OMNI TEAM EQUIPMENT DRAWINGS: PLEASE SEE THE OMNI TEAM REFERENCE SHOP DRAWINGS FOR THE COOLER AND FREEZER SYSTEM. CONTRACTOR RESPONSIBLE FOR FINAL COORDINATION BETWEEN OMNI TEAM EQUIPMENT (OR APPROVED EQUAL EQUIPMENT) AND THESE DESIGN DRAWINGS. ALL ELECTRICAL WORK MUST BE COORDINATED WITH SITE CONDITIONS. SEE OMNI TEAM SHOP DRAWINGS FOR SPECIFIC INSTALL REQUIREMENTS.
AutoCAD SHX Text
SCALE:1/8''=1'-0''
AutoCAD SHX Text
EVAPORATOR COIL
AutoCAD SHX Text M6.0
AutoCAD SHX Text
AutoCAD SHX Text
OF
AutoCAD SHX Text
SHEET
AutoCAD SHX Text Proj No:
AutoCAD SHX Text Date:
AutoCAD SHX Text Drawn By:
AutoCAD SHX Text DSGN By:
AutoCAD SHX Text Chkd By:
AutoCAD SHX Text Acad File:
AutoCAD SHX Text
PHN: (503) 234-0548
AutoCAD SHX Text
WWW.MFIA-ENG.COM
AutoCAD SHX Text
FAX: (503) 234-0677
AutoCAD SHX Text Consulting Engineers
AutoCAD SHX Text Portland, OR 97214
AutoCAD SHX Text 2007 S.E. Ash St.
AutoCAD SHX Text
TWO RIVERS CORRECTIONAL INSTITUTION - COOLER & FREEZER EQUIPMENT REPLACEMENT
AutoCAD SHX Text
OREGON DEPARTMENT OF CORRECTIONS
AutoCAD SHX Text
82911 BEACH ACCESS ROAD
AutoCAD SHX Text
UMATILLA
AutoCAD SHX Text
OREGON 97882
AutoCAD SHX Text 5-19-25
AutoCAD SHX Text 10732
AutoCAD SHX Text
MD
AutoCAD SHX Text
MD
AutoCAD SHX Text
MD
AutoCAD SHX Text 5-19-25
AutoCAD SHX Text
AutoCAD SHX Text M6.0
AutoCAD SHX Text
MECHANICAL SCHEDULES AND DETAILS
Refrigeration Plan 3 of R1
None
TYPICAL PIPING FOR VERTICAL RISERS
E-Mail: AlbertL@omniteaminc.com Web page address: www.omniteaminc.com
(800) 423-9660 (Toll-Free) - (562) 862-7466 (Fax)
4380 Ayers Avenue, Vernon, California 90058 Manufacturer of OmniTemp Refrigeration Products
GENERAL NOTES
OmniTeam,Inc.
REMOTE REFRIGERATION EQUIPMENT SCHEDULE
Hans Haasis, Jr.
03/11/25 ENG 3-11-25TRCI (Two Rivers Correctional Institute) (Cooler) Umatilla, OR
Albert Lamug
USE 15% SIL-FOS ON ALL BRAZING
TYPICAL BRANCH PIPING FOR TEE'S
CONTRACTORS SHALL VERIFY ALL DIMENSIONS AND COORDINATE WITH OMNI TEMP REFRIGERATION.
2.
1.
CLOSED OFF.
WHEN REQUIRED, INSTALLATION OF DRAIN LINES IN WALL SHOULD BE DONE BEFORE THE WALL IS PLUMBING CONTRACTOR (DIVISION 15) TO VERIFY THE METHOD USED AND LOCATION FOR FIXTURE DRAINS.
FOR EACH EVAPORATOR, UNLESS OTHERWISE INDICATED.
MUST BE TRAPPED OUTSIDE OF BOX TO AVOID ENTRANCE OF WARM AIR. PROVIDE INDIVIDUAL DRAIN LINES
LINES FOR WALK-IN FREEZERS AND REFRIGERATORS. PITCH TO BE MINIMUM OF 1/2" PER FOOT OF PLUMBING CONTRACTOR (DIVISION 15) TO PROVIDE HARD AC&R OR TYPE "L" COPPER CONDENSATE DRAIN
4.
3.
2.
1.
6.
PLUMBING
ELECTRICAL CONTRACTOR (DIVISION 16) TO PROVIDE ANY DISCONNECT SWITCH NEEDED BY LOCAL CODES.
LOCAL CODES.
ALL ELECTRICAL WIRES AND INSTALLATIONS SHALL BE IN ACCORDANCE WITH THE WIRING DIAGRAM AND
THE BLUEPRINT INDICATES OTHERWISE.
AT THE REFRIGERATION PACKAGE TO BLOWER COILS IN THE FIXTURE FOR AUTOMATIC DEFROST, UNLESS ELECTRICAL CONTRACTOR (DIVISION 16) TO PROVIDE 5-WIRE COLOR CODED SERVICE FROM THE TIMECLOCKS
DIAGRAM.
ELECTRICAL CONNECTION REQUIRED FOR RACK CONTROL PANEL AND DEFROST SYSTEMS AS PER THE WIRING ELECTRICAL CONTRACTOR (DIVISION 16) IS TO PROVIDE POWER FOR REFRIGERATION RACK AND ALL COILS.
ELECTRICAL
EACH SYSTEM AND EVAPORATOR IS SHIPPED UNDER NITROGEN PRESSURE.
SAFETY CAUTION:
8.
7.
5.
4.
3.
2.
1.
COPPER TO STEEL CONTACT PERMITTED.
USED ON EACH SYSTEM.
ALL COILS SUPPLIED BY OTHERS MUST HAVE EXPANSION VALVES COMPATIBLE WITH THE REFRIGERANT
FURNISH AND INSTALL A 6 WATT PER 1FT. 230V. HEATER TAPE ON WALK-IN FREEZER DRAINS.
PUMP.
ALL COMPLETED REFRIGERATION SYSTEMS MUST BE EVACUATED TO 500 MICRONS OR LESS WITH VACUUM
ALL ROUGH-IN PIPING SHALL BE PRESSURE TESTED WITH DRY NITROGEN AT 300 PSI FOR AND HOLD FOR A MINIMUM OF 48 HOURS.
SIL-FOS. (SOFT SOLDER SHALL NOT BE USED FOR REFRIGERANT PIPING).
FOR STEEL TO COPPER CONNECTIONS, USE SILVER SOLDER. FOR COPPER TO COPPER CONNECTIONS, USE
ARMAFLEX (25/50) WALL INSULATION FOR COOLERS AND 1" ARMAFLEX (25/50) WALL INSULATION FOR FREEZERS.
HARD COPPER TUBING SHALL BE SWEAT TYPE FITTINGS. SUCTION LINES TO BE INSULATED WITH 3/4" ALL COPPER TUBING TO BE REFRIGERANT GRADE AC&R TYPE "L" (CLEANED & DEHYDRATED). JOINTS FOR ALL
PRE-WIRED IN EACH COIL SUPPLIED BY OMNI TEMP REFRIGERATION (UNLESS OTHERWISE NOTED ON PRINTS).
REFRIGERATION
GENERAL
6.
5.
4.
3.
2.
1.
POCKET AS REQUIRED.
AFTER INSTALLATION OF REFRIGERATION LINES, GENERAL CONTRACTOR SHALL BACKFILL THE PITCH
MINIMUM OF 36" CLEARANCE IN FRONT OF ELECTRICAL PANEL.
MINIMUM OF 30" CLEARANCE FOR ACCESSIBILITY AROUND COMPRESSOR RACK NEEDED FOR SERVICEABILITY.
ALL CORED HOLES SHALL BE FIREPROOFED AS REQUIRED BY LOCAL CODES BY GENERAL CONTRACTOR.
ALL CORED HOLES REQUIRED ON JOB ARE TO BE PROVIDED BY GENERAL CONTRACTOR.
IT WILL BE NECESSARY TO COPE WITH CONSTRUCTION CONDITIONS.
REFER TO ALL NOTES ON THIS PLAN. ROUTING OF REFRIGERATION TUBING IS FURNISHED AS A GUIDE.
ALL COILS SUPPLIED WITH EXPANSION VALVES, THERMOSTATS AND SOLENOID VALVES MOUNTED ANDNOTE:
ALL SUCTION LINES WITH 15FT. OR MORE VERTICAL RISE, ARE TO BE TRAPPED FOR PROPER OIL RETURN.
ALL FIELD PIPING SUPPORTS ARE TO HAVE PLASTIC BUSHINGS BETWEEN CLAMPS AND PIPING, NO
9. OMNI TEMP NOT RESPONSIBLE FOR FIELD WIRING.
USE CAUTION AND EXERCISE SAFETY AT ALL TIMES WHEN CUTTING LINES ON
EVAPORATORS AND REFRIGERATION RACK.
5. FOR F.W.I. ITEMS, THERMOSTAT AND SOLENOID WIRED TO COIL BY FIELD ELECTRICIAN.
RUN IN FREEZERS. DRAIN LINES IN FREEZERS MUST BE INSULATED TO PREVENT FREEZING. DRAIN LINES
6. FIELD ELECTRICIAN TO CONNECT COPPER ELECTRICAL LINES TO RACK SYSTEM.
AFTER ALL FINAL PIPING CONNECTIONS OF COMPRESSOR RACK AND EVAPORATOR COILS HAVE BEEN COMPLETED, PRESSURIZE WITH DRY NITROGEN TO 125 PSI FOR A MINIMUM OF 24 HOURS FOR FINAL PRESSURE TEST
OMNI TEMP REFRIGERATION RACK
DATE: REVISED 3-11-25
NOTES: SYSTEM DESIGN WILL FLIP-FLOP
PROJECT NAME: TRCI REP: SCHULZ & ASSOC. THE RUN TIME OF THE COMPRESSORS.
LOCATION: UMATILLA, OREGON CONTACT: JEFF COILS WILL HAVE KE2 DEFROST SYSTEM
BID BY: HANS CONSULTANT: MFIA THAT CAN BE CONNECTED TO THE INTERNET.
ITEM / MODEL OF RACK: OT2D8-AC-H-4-0-3-454 CONTACT: MARK THERE WILL BE A LEAK DETECTOR SYSTEM
SIZE / WEIGHT OF RACK: 192'' X 48'' X 88'' 5000# AND BUZZER AND LIGHT ALARM FOR BOX.
VOLT COIL
ITEM SYS DESCRIPTION BTU FIX SUC R COMPRESSOR CAP HP PH RLA LRA L1 L2 L3 QTY COIL FAN DEF PH WT.
C1 DRIVE IN COOLER #1 105 35 25 R-454c 4DES-7-4SU-OY 62 7 460/3 15.3 88.0 15.3 15.3 15.3 1 KEP-068-MA-S2-D-KE2 6.4 EA 208/1 320
C2 FLIP-FLOP #1 35 25 R-454c 4DES-7-4SU-OY 62 7 460/3 15.3 88.0
D1 DRIVE IN COOLER #2 35 25 R-454c 4DES-7-4SU-OY 62 7 460/3 15.3 88.0 15.3 15.3 15.3 1 KEP-068-MA-S2-D-KE2 6.4 EA 208/1 320
D2 FLIP-FLOP #2 35 25 R-454c 4DES-7-4SU-OY 62 7 460/3 15.3 88.0
COND. FANS .75 EA 208/1 2.2 EA 3.3 3.3 2.2
CRANKCASE HEATERS 208/1 .5 EA 1.0 1.0
Line Amps: 34.9 33.9 33.8
Conn: 34.9
Min: 40.0
Max: 50.0 460v 3ph
1 KEP-068-MA-S2-D-KE2 6.4 EA 208/1 320
1 KEP-068-MA-S2-D-KE2 6.4 EA 208/1 320
ELEVATION
PLAN VIEW
C.
T.
OF
B.
I.
A.
O
F H.
&W.
MODEL: OTF8-AC-H
TempOmni
(INCHES)
LENGTH
RACK OVERALL DIMENSIONS
(INCHES)
WIDTH
(INCHES)
HEIGHT
ROOFTOP APPLICATIONS
CONCRETE PAD APPLICATIONS
SUGGESTED CURB DETAIL(S)
CONCRETE CURB (6" MINIMUM)
NOTE: TO BE PROVIDED BY GENERAL CONTRACTOR
ROOF PAD (6" MINIMUM)
SECTION VIEW
RESTRAINTS
SUGGESTED ANCHORING
REFRIGERATION PIPING OPTION(S)MAIN DISCONNECT BOLT DOWN BRACKET(S)
WIRING CONDUIT:
MAIN POWER
MAIN POWER
RAIN-TIGHT
FLEXIBLE CONDUIT
BY ELECTRICAL
CONTRACTOR
ALLOW 36" CLEAR AROUND UNIT
ISOMETRIC
(FRONT VIEW)
EXTERNAL PIPINGINTERNAL PITCH POCKET
CUSTOMER SIGNATURE
OPTION #2
CUSTOMER SIGNATURE
OPTION #1 (ADDITIONAL CHARGE)(DEFAULT / STANDARD)
C1
C2
D1
D2
AutoCAD SHX Text
THIS PLAN IS PRIMARILY A GENERAL ARRANGEMENT OF EQUIPMENT FOR THE
AutoCAD SHX Text
CONVENIENCE OF CONTRACTORS AND IS MADE FROM AVAILABLE INFORMATION.
AutoCAD SHX Text
BUT MEASUREMENTS ARE TO BE VERIFIED ON THE JOB. PLUMBING, ELECTRICAL,
AutoCAD SHX Text
POSSIBLE AND ARE INTENDED TO SUIT EQUIPMENT TO BE SUPPLIED. WE ACCEPT
AutoCAD SHX Text
STAND ANY EXPENSE FOR CHANGES MADE NECESSARY BY LOCAL BUILDING
AutoCAD SHX Text
CODES, ORDINANCES, STRUCTURAL CONDITIONS, OR BY THE SUBSTITUTION OR
AutoCAD SHX Text
CHANGES IN EQUIPMENT SHOWN ON THIS PLAN. THIS DRAWING IS THE PROPERTY
AutoCAD SHX Text
OF OMNITEAM INCORPORATED. IT IS NOT TO BE REPRODUCED OR DISTRIBUTED,
AutoCAD SHX Text
EITHER IN WHOLE OR IN PART.
AutoCAD SHX Text
REFRIGERATION, AND VENT OUTLETS HAVE BEEN LOCATED AS ACCURATELY AS
AutoCAD SHX Text
NO RESPONSIBILITY FOR WORK DONE BY SAID CONTRACTORS AND WILL NOT
AutoCAD SHX Text
SHEET NUMBER:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
BY
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
BY
AutoCAD SHX Text
DATE
AutoCAD SHX Text
NO.
AutoCAD SHX Text e
AutoCAD SHX Text R
AutoCAD SHX Text f
AutoCAD SHX Text h
AutoCAD SHX Text n
AutoCAD SHX Text i
AutoCAD SHX Text l
AutoCAD SHX Text s
AutoCAD SHX Text o
AutoCAD SHX Text v
AutoCAD SHX Text t
AutoCAD SHX Text g
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text n
AutoCAD SHX Text o
AutoCAD SHX Text s
AutoCAD SHX Text d
AutoCAD SHX Text d
AutoCAD SHX Text y
AutoCAD SHX Text a
AutoCAD SHX Text w
AutoCAD SHX Text m
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text
AutoCAD SHX Text
DESIGN #:
AutoCAD SHX Text A
AutoCAD SHX Text
APL
AutoCAD SHX Text 02/13/25
AutoCAD SHX Text
SUCTION "T"
AutoCAD SHX Text
SUCTION TRUNK
AutoCAD SHX Text
LIQUID "T"
AutoCAD SHX Text
LIQUID TRUNK
AutoCAD SHX Text
SUCTION TEE
AutoCAD SHX Text
180° ELBOW
AutoCAD SHX Text
SUCTION RISER
AutoCAD SHX Text
VERTICAL
AutoCAD SHX Text
TO FIXTURE
AutoCAD SHX Text
LIQUID LINE
AutoCAD SHX Text
REFRIGERATION UNIT
AutoCAD SHX Text
ROOF OR HIGHER LEVEL
AutoCAD SHX Text
REFRIGERATION RACK @
AutoCAD SHX Text
P-TRAP EVERY 15'
AutoCAD SHX Text
REFRIGERATION LINE
AutoCAD SHX Text Initial Design Release to MFIA, Inc Consulting Engineers (Mark Denyer)
AutoCAD SHX Text A1
AutoCAD SHX Text
APL
AutoCAD SHX Text 03/11/25
AutoCAD SHX Text Revised design (#ENG 3-11-25)
AutoCAD SHX Text 16'-7" (199") O.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text
7'-4" (88") RACK
AutoCAD SHX Text
17'-0" (204") CURB
AutoCAD SHX Text
16'-0" (192") RACK
AutoCAD SHX Text
5'-0" CURB
AutoCAD SHX Text
STANDARD BOLT DOWN BRACKETS ( 6 TYPICAL)
AutoCAD SHX Text
ELECTRICAL PANEL
AutoCAD SHX Text 4'-6" (54") O.D.
AutoCAD SHX Text
4'-0" (48") RACK
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text C
AutoCAD SHX Text R
AutoCAD SHX Text
UNION MADE
AutoCAD SHX Text
UL STD 1995
AutoCAD SHX Text
CONFORMS TO
AutoCAD SHX Text
US
AutoCAD SHX Text
LISTED
AutoCAD SHX Text
INTERTEK
AutoCAD SHX Text C
AutoCAD SHX Text
ETL LISTED
AutoCAD SHX Text
ANCHOR BY G.C.
AutoCAD SHX Text
WASHER BY G.C.
AutoCAD SHX Text
BOLT BY G.C.
AutoCAD SHX Text
BRACKET WELDED TO RACK
AutoCAD SHX Text
RACK RESTRAINT BY OMNI TEMP
AutoCAD SHX Text
CONCRETE PAD BY G.C.
AutoCAD SHX Text
RACK FRAME
AutoCAD SHX Text
RACK FRAME
AutoCAD SHX Text
COVER BY G.C.
AutoCAD SHX Text
ROOF LINE
AutoCAD SHX Text
SHEET METAL PLATFORM
AutoCAD SHX Text
IN PLATFORM BY G.C.
AutoCAD SHX Text
ANCHORING BEAM
AutoCAD SHX Text
ANCHOR BY G.C.
AutoCAD SHX Text
WASHER BY G.C.
AutoCAD SHX Text
BOLT BY G.C.
AutoCAD SHX Text
BRACKET WELDED TO RACK
AutoCAD SHX Text
RACK RESTRAINT BY OMNI TEMP
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text
NOTE:
AutoCAD SHX Text
CALCULATIONS ARE TO BE DONE BY OTHERS.
AutoCAD SHX Text
PLATFORM STRUCTURAL SPECIFICATIONS AND
AutoCAD SHX Text
AND CALCULATIONS ARE TO BE DONE BY OTHERS.
AutoCAD SHX Text
SEISMIC RESTRAINT, STRUCTURAL SPECIFICATIONS
AutoCAD SHX Text
CURB
AutoCAD SHX Text 1'-8"
AutoCAD SHX Text 1'-8"
AutoCAD SHX Text 1'-8"
AutoCAD SHX Text
ACCOMMODATION FOR
AutoCAD SHX Text
REFRIGERATION LINES &
AutoCAD SHX Text
ELECTRICAL CONNECTIONS
AutoCAD SHX Text
ELECTRICAL PANEL
AutoCAD SHX Text
RACK
AutoCAD SHX Text 1'-3"
AutoCAD SHX Text 8"
AutoCAD SHX Text 6"
AutoCAD SHX Text 3"
AutoCAD SHX Text 14"
AutoCAD SHX Text 6"
AutoCAD SHX Text
(2) 5/8" HOLES
AutoCAD SHX Text
6" HIGH
AutoCAD SHX Text
ROOF
AutoCAD SHX Text
PENETRATION
AutoCAD SHX Text
RACK
AutoCAD SHX Text
ANGLE IRON WELDED ON
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
CONDENSER
AutoCAD SHX Text
SIDE
AutoCAD SHX Text
CONDENSER
AutoCAD SHX Text
SIDE
AutoCAD SHX Text
PITCH-POCKET OPENING WITH URETHANE FOAM WITH
AutoCAD SHX Text
GENERAL CONTRACTOR OR ROOFING CONTRACTOR TO FILL
WATER-PROOF SEAL COAT ON TOP OF FOAM.
FOR SYSTEM(S): C1 & C2
ITEM
DESCRIPTION FAN AMPSYSTEM QTY.
C1 6.4 EA.1 208/1
VOLTAGE
KE2 DEFROST CONTROLLER FOR WALK-IN COOLER
Evap Fans S
Liquid Line Sol.
N X
BLK
RED
BLUE
ORANGE
YELLOW
RED
BLACK
M O
TO
R
RED
GREEN
WHITE
BLACK
EEV
EMPTY
RSV
Transducer
A B Shield
G
GRN
*Only for use with Aux Relay Board.
BLACK
GREEN
RED
COIL 1
TERMINAL BOARD
COIL 1
230V, 1Ph, 60Hz
ENTERING SERVICE
L2L1
FUSES OR
CIRC BREAKER
FIELD SUPPLY
(SINGLE PHASE)
208V, 1Ph
Evap Fans S
Liquid Line Sol.
N X
BLK
RED
BLUE
ORANGE
YELLOW
RED
BLACK
M O
TO
R
RED
GREEN
WHITE
BLACK
EEV
EMPTY
RSV
Transducer
A B Shield
G
GRN
*Only for use with Aux Relay Board.
BLACK
GREEN
RED
COIL 2
TERMINAL BOARD
COIL 2
230V, 1Ph, 60Hz
ENTERING SERVICE
L2L1
FUSES OR
CIRC BREAKER
FIELD SUPPLY
(SINGLE PHASE)
208V, 1Ph
REDUNDANT (FLIP-FLOP)
CAT 5/6a CABLE (ETHERNET)
PROVIDED BY OMNI FOR EVAPORATOR PAIRING*
--- C2 6.4 EA.1 208/1
DRIVE IN COOLER
FLIP-FLOP #1
8" A
.F .F
1. RUN EACH DRAIN SEPARATELY.
NOTES:
TO SEAL PENETRATION
INSULATED WALL
REFRIGERATION CONTRACTOR
INSULATED SUCTION LINE
"P"-TRAP:
TERMINATED
ABOVE FLOOR
SINK (1") OR
FLOOR SINK
AS REQUIRED
BY LOCAL CODE
INVERTED "P"-TRAP
2. DRAIN LINE TO EXIT 45° AT BACK OF
COIL. EXIT FROM FREEZER AT EARLIEST
POSSIBLE DISTANCE.
MAINTAIN (1") CLEARANCE
FROM WALL OF WALK-IN
3. ELECTRICAL CONTRACTOR TO MAKE
FINAL CONNECTION OF DRAIN LINE HEATER.
PLUMBING CONTRACTOR
VAPOR SEAL BY
OPEN DRAIN
COIL
UNIT COOLER
EXTENDED PROFILE
ALL DRAIN LINES REQUIRE A
MINIMUM OF 1/2" FALL PER FOOT
PITCH FOR PROPER DRAINAGE:
COPPER UNION:
SUPPLIED/INSTALLED
BY PLUMBER
WALK-IN APPLICATIONS "LOW TEMP" (32°F & LOWER):
ELECTRIC HEATER (SPIRALED AND TAPED) ON
DRAIN LINE BEFORE APPLYING INSULATION BY
REFRIGERATION CONTRACTOR
COPPER DRAIN LINE:
BY PLUMBING CONTRACTOR
AIR OUT AIR IN
CONDENSATE DRAIN LINES EVAPORATOR COIL SPECIFICATIONS
EXTENDED PROFILE UNIT COOLER
AIR DEFROST ~ (2) FANS
KEP
SERIES
MODEL CONNECTIONS (INCHES), NOT FOR FIELD PIPING
LBS.
SHIP WGT.
APPROX.
BUILDING
ELECTRICAL POWER
SUPPLY CONNECTION
FROM
RACK
FROM
VOLTAGE
PH / HZ
1 / 60AIR
DEFROST
MED
TEMP
(ID) SWEAT
SUCTION
CONNECTION
SIZE
DISTRIBUTOR
INLET
068 320 YES NOS2DMA 1-3/8 1-1/8
ECM
SmartSpeed
YES
(New Gen D)
Refrigeration Plan 3 of R2
None
E-Mail: AlbertL@omniteaminc.com Web page address: www.omniteaminc.com
(800) 423-9660 (Toll-Free) - (562) 862-7466 (Fax)
4380 Ayers Avenue, Vernon, California 90058 Manufacturer of OmniTemp Refrigeration Products
OmniTeam,Inc.
Hans Haasis, Jr.
03/11/25 ENG 3-11-25TRCI (Two Rivers Correctional Institute) (Cooler) Umatilla, OR
Albert Lamug
AutoCAD SHX Text
COMPARTMENT
AutoCAD SHX Text
PIPING
AutoCAD SHX Text
COMPARTMENT
AutoCAD SHX Text
ELECTRICAL
AutoCAD SHX Text 22 3/4
AutoCAD SHX Text 8 1/8
AutoCAD SHX Text 84 1/4
AutoCAD SHX Text 6 1/8
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 7 1/4
AutoCAD SHX Text
AutoCAD SHX Text
MIN
AutoCAD SHX Text 37 3/4
AutoCAD SHX Text
AIR THROW
AutoCAD SHX Text
APPROX 90'
AutoCAD SHX Text
IN OPEN
AutoCAD SHX Text
SPACE
AutoCAD SHX Text 11 7/8
AutoCAD SHX Text
THIS PLAN IS PRIMARILY A GENERAL ARRANGEMENT OF EQUIPMENT FOR THE
AutoCAD SHX Text
CONVENIENCE OF CONTRACTORS AND IS MADE FROM AVAILABLE INFORMATION.
AutoCAD SHX Text
BUT MEASUREMENTS ARE TO BE VERIFIED ON THE JOB. PLUMBING, ELECTRICAL,
AutoCAD SHX Text
POSSIBLE AND ARE INTENDED TO SUIT EQUIPMENT TO BE SUPPLIED. WE ACCEPT
AutoCAD SHX Text
STAND ANY EXPENSE FOR CHANGES MADE NECESSARY BY LOCAL BUILDING
AutoCAD SHX Text
CODES, ORDINANCES, STRUCTURAL CONDITIONS, OR BY THE SUBSTITUTION OR
AutoCAD SHX Text
CHANGES IN EQUIPMENT SHOWN ON THIS PLAN. THIS DRAWING IS THE PROPERTY
AutoCAD SHX Text
OF OMNITEAM INCORPORATED. IT IS NOT TO BE REPRODUCED OR DISTRIBUTED,
AutoCAD SHX Text
EITHER IN WHOLE OR IN PART.
AutoCAD SHX Text
REFRIGERATION, AND VENT OUTLETS HAVE BEEN LOCATED AS ACCURATELY AS
AutoCAD SHX Text
NO RESPONSIBILITY FOR WORK DONE BY SAID CONTRACTORS AND WILL NOT
AutoCAD SHX Text
SHEET NUMBER:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
BY
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
BY
AutoCAD SHX Text
DATE
AutoCAD SHX Text
NO.
AutoCAD SHX Text e
AutoCAD SHX Text R
AutoCAD SHX Text f
AutoCAD SHX Text h
AutoCAD SHX Text n
AutoCAD SHX Text i
AutoCAD SHX Text l
AutoCAD SHX Text s
AutoCAD SHX Text o
AutoCAD SHX Text v
AutoCAD SHX Text t
AutoCAD SHX Text g
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text n
AutoCAD SHX Text o
AutoCAD SHX Text s
AutoCAD SHX Text d
AutoCAD SHX Text d
AutoCAD SHX Text y
AutoCAD SHX Text a
AutoCAD SHX Text w
AutoCAD SHX Text m
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text
AutoCAD SHX Text
DESIGN #:
AutoCAD SHX Text A
AutoCAD SHX Text
APL
AutoCAD SHX Text 02/13/25
AutoCAD SHX Text Initial Design Release to MFIA, Inc Consulting Engineers (Mark Denyer)
AutoCAD SHX Text A1
AutoCAD SHX Text
APL
AutoCAD SHX Text 03/11/25
Revised design (#ENG 3-11-25)
R3
None
E-Mail: AlbertL@omniteaminc.com Web page address: www.omniteaminc.com
(800) 423-9660 (Toll-Free) - (562) 862-7466 (Fax)
4380 Ayers Avenue, Vernon, California 90058 Manufacturer of OmniTemp Refrigeration Products
OmniTeam,Inc.
Hans Haasis, Jr.
03/11/25 ENG 3-11-25TRCI (Two Rivers Correctional Institute) (Cooler) Umatilla, OR
Albert Lamug
FOR SYSTEM(S): D1 & D2
ITEM
DESCRIPTION FAN AMPSYSTEM QTY.
D1 6.4 EA.1 208/1
VOLTAGE
KE2 DEFROST CONTROLLER FOR WALK-IN COOLER
Evap Fans S
Liquid Line Sol.
N X
BLK
RED
BLUE
ORANGE
YELLOW
RED
BLACK
M O
TO
R
RED
GREEN
WHITE
BLACK
EEV
EMPTY
RSV
Transducer
A B Shield
G
GRN
*Only for use with Aux Relay Board.
BLACK
GREEN
RED
COIL 1
TERMINAL BOARD
COIL 1
230V, 1Ph, 60Hz
ENTERING SERVICE
L2L1
FUSES OR
CIRC BREAKER
FIELD SUPPLY
(SINGLE PHASE)
208V, 1Ph
Evap Fans S
Liquid Line Sol.
N X
BLK
RED
BLUE
ORANGE
YELLOW
RED
BLACK
M O
TO
R
RED
GREEN
WHITE
BLACK
EEV
EMPTY
RSV
Transducer
A B Shield
G
GRN
*Only for use with Aux Relay Board.
BLACK
GREEN
RED
COIL 2
TERMINAL BOARD
COIL 2
230V, 1Ph, 60Hz
ENTERING SERVICE
L2L1
FUSES OR
CIRC BREAKER
FIELD SUPPLY
(SINGLE PHASE)
208V, 1Ph
REDUNDANT (FLIP-FLOP)
CAT 5/6a CABLE (ETHERNET)
PROVIDED BY OMNI FOR EVAPORATOR PAIRING*
--- D2 6.4 EA.1 208/1
DRIVE IN COOLER
FLIP-FLOP #2
8" A
.F .F
1. RUN EACH DRAIN SEPARATELY.
NOTES:
TO SEAL PENETRATION
INSULATED WALL
REFRIGERATION CONTRACTOR
INSULATED SUCTION LINE
"P"-TRAP:
TERMINATED
ABOVE FLOOR
SINK (1") OR
FLOOR SINK
AS REQUIRED
BY LOCAL CODE
INVERTED "P"-TRAP
2. DRAIN LINE TO EXIT 45° AT BACK OF
COIL. EXIT FROM FREEZER AT EARLIEST
POSSIBLE DISTANCE.
MAINTAIN (1") CLEARANCE
FROM WALL OF WALK-IN
3. ELECTRICAL CONTRACTOR TO MAKE
FINAL CONNECTION OF DRAIN LINE HEATER.
PLUMBING CONTRACTOR
VAPOR SEAL BY
OPEN DRAIN
COIL
UNIT COOLER
EXTENDED PROFILE
ALL DRAIN LINES REQUIRE A
MINIMUM OF 1/2" FALL PER FOOT
PITCH FOR PROPER DRAINAGE:
COPPER UNION:
SUPPLIED/INSTALLED
BY PLUMBER
WALK-IN APPLICATIONS "LOW TEMP" (32°F & LOWER):
ELECTRIC HEATER (SPIRALED AND TAPED) ON
DRAIN LINE BEFORE APPLYING INSULATION BY
REFRIGERATION CONTRACTOR
COPPER DRAIN LINE:
BY PLUMBING CONTRACTOR
AIR OUT AIR IN
CONDENSATE DRAIN LINES EVAPORATOR COIL SPECIFICATIONS
EXTENDED PROFILE UNIT COOLER
AIR DEFROST ~ (2) FANS
KEP
SERIES
MODEL CONNECTIONS (INCHES), NOT FOR FIELD PIPING
LBS.
SHIP WGT.
APPROX.
BUILDING
ELECTRICAL POWER
SUPPLY CONNECTION
FROM
RACK
FROM
VOLTAGE
PH / HZ
1 / 60AIR
DEFROST
MED
TEMP
(ID) SWEAT
SUCTION
CONNECTION
SIZE
DISTRIBUTOR
INLET
068 320 YES NOS2DMA 1-3/8 1-1/8
ECM
SmartSpeed
YES
(New Gen D)
AutoCAD SHX Text
THIS PLAN IS PRIMARILY A GENERAL ARRANGEMENT OF EQUIPMENT FOR THE
AutoCAD SHX Text
CONVENIENCE OF CONTRACTORS AND IS MADE FROM AVAILABLE INFORMATION.
AutoCAD SHX Text
BUT MEASUREMENTS ARE TO BE VERIFIED ON THE JOB. PLUMBING, ELECTRICAL,
AutoCAD SHX Text
POSSIBLE AND ARE INTENDED TO SUIT EQUIPMENT TO BE SUPPLIED. WE ACCEPT
AutoCAD SHX Text
STAND ANY EXPENSE FOR CHANGES MADE NECESSARY BY LOCAL BUILDING
AutoCAD SHX Text
CODES, ORDINANCES, STRUCTURAL CONDITIONS, OR BY THE SUBSTITUTION OR
AutoCAD SHX Text
CHANGES IN EQUIPMENT SHOWN ON THIS PLAN. THIS DRAWING IS THE PROPERTY
AutoCAD SHX Text
OF OMNITEAM INCORPORATED. IT IS NOT TO BE REPRODUCED OR DISTRIBUTED,
AutoCAD SHX Text
EITHER IN WHOLE OR IN PART.
AutoCAD SHX Text
REFRIGERATION, AND VENT OUTLETS HAVE BEEN LOCATED AS ACCURATELY AS
AutoCAD SHX Text
NO RESPONSIBILITY FOR WORK DONE BY SAID CONTRACTORS AND WILL NOT
AutoCAD SHX Text
SHEET NUMBER:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
BY
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
BY
AutoCAD SHX Text
DATE
AutoCAD SHX Text
NO.
AutoCAD SHX Text e
AutoCAD SHX Text R
AutoCAD SHX Text f
AutoCAD SHX Text h
AutoCAD SHX Text n
AutoCAD SHX Text i
AutoCAD SHX Text l
AutoCAD SHX Text s
AutoCAD SHX Text o
AutoCAD SHX Text v
AutoCAD SHX Text t
AutoCAD SHX Text g
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text n
AutoCAD SHX Text o
AutoCAD SHX Text s
AutoCAD SHX Text d
AutoCAD SHX Text d
AutoCAD SHX Text y
AutoCAD SHX Text a
AutoCAD SHX Text w
AutoCAD SHX Text m
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text
AutoCAD SHX Text
DESIGN #:
AutoCAD SHX Text A
AutoCAD SHX Text
APL
AutoCAD SHX Text 02/13/25
AutoCAD SHX Text Initial Design Release to MFIA, Inc Consulting Engineers (Mark Denyer)
AutoCAD SHX Text A1
AutoCAD SHX Text
APL
AutoCAD SHX Text 03/11/25
AutoCAD SHX Text Revised design (#ENG 3-11-25)
AutoCAD SHX Text
COMPARTMENT
AutoCAD SHX Text
PIPING
AutoCAD SHX Text
COMPARTMENT
AutoCAD SHX Text
ELECTRICAL
AutoCAD SHX Text 22 3/4
AutoCAD SHX Text 8 1/8
AutoCAD SHX Text 84 1/4
AutoCAD SHX Text 6 1/8
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 7 1/4
AutoCAD SHX Text
AutoCAD SHX Text
MIN
AutoCAD SHX Text 37 3/4
AutoCAD SHX Text
AIR THROW
AutoCAD SHX Text
APPROX 90'
AutoCAD SHX Text
IN OPEN
AutoCAD SHX Text
SPACE
11 7/8
R1
None
TYPICAL PIPING FOR VERTICAL RISERS
E-Mail: AlbertL@omniteaminc.com Web page address: www.omniteaminc.com
(800) 423-9660 (Toll-Free) - (562) 862-7466 (Fax)
4380 Ayers Avenue, Vernon, California 90058 Manufacturer of OmniTemp Refrigeration Products
GENERAL NOTES
OmniTeam,Inc.
REMOTE REFRIGERATION EQUIPMENT SCHEDULE
Hans Haasis, Jr.
TRCI (Two Rivers Correctional Institute) (Freezer) Umatilla, OR
Albert Lamug
USE 15% SIL-FOS ON ALL BRAZING
TYPICAL BRANCH PIPING FOR TEE'S
CONTRACTORS SHALL VERIFY ALL DIMENSIONS AND COORDINATE WITH OMNI TEMP REFRIGERATION.
2.
1.
CLOSED OFF.
WHEN REQUIRED, INSTALLATION OF DRAIN LINES IN WALL SHOULD BE DONE BEFORE THE WALL IS PLUMBING CONTRACTOR (DIVISION 15) TO VERIFY THE METHOD USED AND LOCATION FOR FIXTURE DRAINS.
FOR EACH EVAPORATOR, UNLESS OTHERWISE INDICATED.
MUST BE TRAPPED OUTSIDE OF BOX TO AVOID ENTRANCE OF WARM AIR. PROVIDE INDIVIDUAL DRAIN LINES
LINES FOR WALK-IN FREEZERS AND REFRIGERATORS. PITCH TO BE MINIMUM OF 1/2" PER FOOT OF PLUMBING CONTRACTOR (DIVISION 15) TO PROVIDE HARD AC&R OR TYPE "L" COPPER CONDENSATE DRAIN
4.
3.
2.
1.
6.
PLUMBING
ELECTRICAL CONTRACTOR (DIVISION 16) TO PROVIDE ANY DISCONNECT SWITCH NEEDED BY LOCAL CODES.
LOCAL CODES.
ALL ELECTRICAL WIRES AND INSTALLATIONS SHALL BE IN ACCORDANCE WITH THE WIRING DIAGRAM AND
THE BLUEPRINT INDICATES OTHERWISE.
AT THE REFRIGERATION PACKAGE TO BLOWER COILS IN THE FIXTURE FOR AUTOMATIC DEFROST, UNLESS ELECTRICAL CONTRACTOR (DIVISION 16) TO PROVIDE 5-WIRE COLOR CODED SERVICE FROM THE TIMECLOCKS
DIAGRAM.
ELECTRICAL CONNECTION REQUIRED FOR RACK CONTROL PANEL AND DEFROST SYSTEMS AS PER THE WIRING ELECTRICAL CONTRACTOR (DIVISION 16) IS TO PROVIDE POWER FOR REFRIGERATION RACK AND ALL COILS.
ELECTRICAL
EACH SYSTEM AND EVAPORATOR IS SHIPPED UNDER NITROGEN PRESSURE.
SAFETY CAUTION:
8.
7.
5.
4.
3.
2.
1.
COPPER TO STEEL CONTACT PERMITTED.
USED ON EACH SYSTEM.
ALL COILS SUPPLIED BY OTHERS MUST HAVE EXPANSION VALVES COMPATIBLE WITH THE REFRIGERANT
FURNISH AND INSTALL A 6 WATT PER 1FT. 230V. HEATER TAPE ON WALK-IN FREEZER DRAINS.
PUMP.
ALL COMPLETED REFRIGERATION SYSTEMS MUST BE EVACUATED TO 500 MICRONS OR LESS WITH VACUUM
ALL ROUGH-IN PIPING SHALL BE PRESSURE TESTED WITH DRY NITROGEN AT 300 PSI FOR AND HOLD FOR A MINIMUM OF 48 HOURS.
SIL-FOS. (SOFT SOLDER SHALL NOT BE USED FOR REFRIGERANT PIPING).
FOR STEEL TO COPPER CONNECTIONS, USE SILVER SOLDER. FOR COPPER TO COPPER CONNECTIONS, USE
ARMAFLEX (25/50) WALL INSULATION FOR COOLERS AND 1" ARMAFLEX (25/50) WALL INSULATION FOR FREEZERS.
HARD COPPER TUBING SHALL BE SWEAT TYPE FITTINGS. SUCTION LINES TO BE INSULATED WITH 3/4" ALL COPPER TUBING TO BE REFRIGERANT GRADE AC&R TYPE "L" (CLEANED & DEHYDRATED). JOINTS FOR ALL
PRE-WIRED IN EACH COIL SUPPLIED BY OMNI TEMP REFRIGERATION (UNLESS OTHERWISE NOTED ON PRINTS).
REFRIGERATION
GENERAL
6.
5.
4.
3.
2.
1.
POCKET AS REQUIRED.
AFTER INSTALLATION OF REFRIGERATION LINES, GENERAL CONTRACTOR SHALL BACKFILL THE PITCH
MINIMUM OF 36" CLEARANCE IN FRONT OF ELECTRICAL PANEL.
MINIMUM OF 30" CLEARANCE FOR ACCESSIBILITY AROUND COMPRESSOR RACK NEEDED FOR SERVICEABILITY.
ALL CORED HOLES SHALL BE FIREPROOFED AS REQUIRED BY LOCAL CODES BY GENERAL CONTRACTOR.
ALL CORED HOLES REQUIRED ON JOB ARE TO BE PROVIDED BY GENERAL CONTRACTOR.
IT WILL BE NECESSARY TO COPE WITH CONSTRUCTION CONDITIONS.
REFER TO ALL NOTES ON THIS PLAN. ROUTING OF REFRIGERATION TUBING IS FURNISHED AS A GUIDE.
ALL COILS SUPPLIED WITH EXPANSION VALVES, THERMOSTATS AND SOLENOID VALVES MOUNTED ANDNOTE:
ALL SUCTION LINES WITH 15FT. OR MORE VERTICAL RISE, ARE TO BE TRAPPED FOR PROPER OIL RETURN.
ALL FIELD PIPING SUPPORTS ARE TO HAVE PLASTIC BUSHINGS BETWEEN CLAMPS AND PIPING, NO
9. OMNI TEMP NOT RESPONSIBLE FOR FIELD WIRING.
USE CAUTION AND EXERCISE SAFETY AT ALL TIMES WHEN CUTTING LINES ON
EVAPORATORS AND REFRIGERATION RACK.
5. FOR F.W.I. ITEMS, THERMOSTAT AND SOLENOID WIRED TO COIL BY FIELD ELECTRICIAN.
RUN IN FREEZERS. DRAIN LINES IN FREEZERS MUST BE INSULATED TO PREVENT FREEZING. DRAIN LINES
6. FIELD ELECTRICIAN TO CONNECT COPPER ELECTRICAL LINES TO RACK SYSTEM.
AFTER ALL FINAL PIPING CONNECTIONS OF COMPRESSOR RACK AND EVAPORATOR COILS HAVE BEEN COMPLETED, PRESSURIZE WITH DRY NITROGEN TO 125 PSI FOR A MINIMUM OF 24 HOURS FOR FINAL PRESSURE TEST
OMNI TEMP REFRIGERATION RACK
03/11/25 ENG 3-11-25
DATE: REVISED 3-11-25
NOTES: SYSTEM DESIGN WILL FLIP-FLOP
PROJECT NAME: TRCI REP: SCHULZ & ASSOC. THE RUN TIME OF THE COMPRESSORS.
LOCATION: UMATILLA, OREGON CONTACT: JEFF COILS WILL HAVE KE2 DEFROST SYSTEM
BID BY: HANS CONSULTANT: MFIA THAT CAN BE CONNECTED TO THE INTERNET.
ITEM / MODEL OF RACK: OT2DX8-AC-H-4-0-3-454 CONTACT: MARK THERE WILL BE A LEAK DETECTOR SYSTEM
SIZE / WEIGHT OF RACK: 192'' X 48'' X 88'' 6500#
PWR 1 PH VOLT COIL
ITEM SYS DESCRIPTION BTU FIX SUC R COMPRESSOR CAP HP PH RLA LRA L1 L2 L3 QTY COIL FAN DEF PH WT.
A1 DRIVE IN FREEZER MASTER #1 101.0 -10 -20 R-454c 4GE-23-4PU-OY 61.6 23 460/3 38.8 297.0 38.8 38.8 38.8 1 KEP-060-LE-T4D-KE2 5.0 EA 11.7 EA 460/3 355
A2 FLIP-FLOP #1 -10 -20 R-454c 4GE-23-4PU-OY 61.6 23 460/3 38.8 297.0
B1 DRIVE IN FREEZER MASTER #2 -10 -20 R-454c 4GE-23-4PU-OY 61.6 23 460/3 38.8 297.0
38.8 38.8 38.8
1 KEP-060-LE-T4D-KE2 5.0 EA 11.7 EA 460/3 355
B2 FLIP-FLOP #2 -10 -20 R-454c 4GE-23-4PU-OY 61.6 23 460/3 38.8 297.0
COND. FANS .75 EA 208/1 2.2 EA 3.3 3.3 2.2
CRANKCASE HEATERS 208/1 .5 EA 1.0 1.0
Line Amps: 81.9 80.9 80.8
Conn: 81.9
Min: 92.0
Max: 120.0 460v 3ph
ELEVATION
PLAN VIEW
C.
T.
OF
B.
I.
A.
O
F H.
&W.
MODEL: OT2DX8-AC-H
TempOmni
ISOMETRIC
(FRONT VIEW)
(INCHES)
LENGTH
RACK OVERALL DIMENSIONS
(INCHES)
WIDTH
(INCHES)
HEIGHT
ROOFTOP APPLICATIONS
CONCRETE PAD APPLICATIONS
SUGGESTED CURB DETAIL(S)
CONCRETE CURB (6" MINIMUM)
NOTE: TO BE PROVIDED BY GENERAL CONTRACTOR
ROOF PAD (6" MINIMUM)
SECTION VIEW
RESTRAINTS
SUGGESTED ANCHORING
REFRIGERATION PIPING OPTION(S)MAIN DISCONNECT BOLT DOWN BRACKET(S)
A1
A2
B1
B2
ALLOW 36" CLEAR AROUND UNIT
EXTERNAL PIPINGINTERNAL PITCH POCKET
CUSTOMER SIGNATURE
OPTION #2
CUSTOMER SIGNATURE
OPTION #1 (ADDITIONAL CHARGE)(DEFAULT / STANDARD)
1 KEP-060-LE-T4D-KE2 5.0 EA 11.7 EA 460/3 355
1 KEP-060-LE-T4D-KE2 5.0 EA 11.7 EA 460/3 355
1.0
WIRING CONDUIT:
MAIN POWER
MAIN POWER
RAIN-TIGHT
FLEXIBLE CONDUIT
BY ELECTRICAL
CONTRACTOR
AutoCAD SHX Text
THIS PLAN IS PRIMARILY A GENERAL ARRANGEMENT OF EQUIPMENT FOR THE
AutoCAD SHX Text
CONVENIENCE OF CONTRACTORS AND IS MADE FROM AVAILABLE INFORMATION.
AutoCAD SHX Text
BUT MEASUREMENTS ARE TO BE VERIFIED ON THE JOB. PLUMBING, ELECTRICAL,
AutoCAD SHX Text
POSSIBLE AND ARE INTENDED TO SUIT EQUIPMENT TO BE SUPPLIED. WE ACCEPT
AutoCAD SHX Text
STAND ANY EXPENSE FOR CHANGES MADE NECESSARY BY LOCAL BUILDING
AutoCAD SHX Text
CODES, ORDINANCES, STRUCTURAL CONDITIONS, OR BY THE SUBSTITUTION OR
AutoCAD SHX Text
CHANGES IN EQUIPMENT SHOWN ON THIS PLAN. THIS DRAWING IS THE PROPERTY
AutoCAD SHX Text
OF OMNITEAM INCORPORATED. IT IS NOT TO BE REPRODUCED OR DISTRIBUTED,
AutoCAD SHX Text
EITHER IN WHOLE OR IN PART.
AutoCAD SHX Text
REFRIGERATION, AND VENT OUTLETS HAVE BEEN LOCATED AS ACCURATELY AS
AutoCAD SHX Text
NO RESPONSIBILITY FOR WORK DONE BY SAID CONTRACTORS AND WILL NOT
AutoCAD SHX Text
SHEET NUMBER:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
DESIGNED BY:
AutoCAD SHX Text
DRAWN BY:
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
BY
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
REVISION
AutoCAD SHX Text
BY
AutoCAD SHX Text
DATE
AutoCAD SHX Text
NO.
AutoCAD SHX Text e
AutoCAD SHX Text R
AutoCAD SHX Text f
AutoCAD SHX Text h
AutoCAD SHX Text n
AutoCAD SHX Text i
AutoCAD SHX Text l
AutoCAD SHX Text s
AutoCAD SHX Text o
AutoCAD SHX Text v
AutoCAD SHX Text t
AutoCAD SHX Text g
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text e
AutoCAD SHX Text n
AutoCAD SHX Text o
AutoCAD SHX Text s
AutoCAD SHX Text d
AutoCAD SHX Text d
AutoCAD SHX Text y
AutoCAD SHX Text a
AutoCAD SHX Text w
AutoCAD SHX Text m
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text o
AutoCAD SHX Text r
AutoCAD SHX Text t
AutoCAD SHX Text o
AutoCAD SHX Text
AutoCAD SHX Text
DESIGN #:
AutoCAD SHX Text A
AutoCAD SHX Text
APL
AutoCAD SHX Text 02/13/25
AutoCAD SHX Text
SUCTION "T"
AutoCAD SHX Text
SUCTION TRUNK
AutoCAD SHX Text
LIQUID "T"
AutoCAD SHX Text
LIQUID TRUNK
AutoCAD SHX Text
SUCTION TEE
AutoCAD SHX Text
180° ELBOW
AutoCAD SHX Text
SUCTION RISER
AutoCAD SHX Text
VERTICAL
AutoCAD SHX Text
TO FIXTURE
AutoCAD SHX Text
LIQUID LINE
AutoCAD SHX Text
REFRIGERATION UNIT
AutoCAD SHX Text
ROOF OR HIGHER LEVEL
AutoCAD SHX Text
REFRIGERATION RACK @
AutoCAD SHX Text
P-TRAP EVERY 15'
AutoCAD SHX Text
REFRIGERATION LINE
AutoCAD SHX Text Initial Design Release to MFIA, Inc Consulting Engineers (Mark Denyer)
AutoCAD SHX Text A1
AutoCAD SHX Text
APL
AutoCAD SHX Text 03/11/25
AutoCAD SHX Text Revised design (#ENG 3-11-25)
AutoCAD SHX Text 16'-10" (202") O.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text
7'-4" (88") RACK
AutoCAD SHX Text
17'-0" (204") CURB
AutoCAD SHX Text
16'-0" (192") RACK
AutoCAD SHX Text
5'-0" CURB
AutoCAD SHX Text
STANDARD BOLT DOWN BRACKETS ( 6 TYPICAL)
AutoCAD SHX Text
ELECTRICAL PANEL
AutoCAD SHX Text 4'-6" (54") O.D.
AutoCAD SHX Text
4'-0" (48") RACK
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text I
AutoCAD SHX Text L
AutoCAD SHX Text O
AutoCAD SHX Text C
AutoCAD SHX Text R
AutoCAD SHX Text
UNION MADE
AutoCAD SHX Text
UL STD 1995
AutoCAD SHX Text
CONFORMS TO
AutoCAD SHX Text
US
AutoCAD SHX Text
LISTED
AutoCAD SHX Text
INTERTEK
AutoCAD SHX Text C
AutoCAD SHX Text
ETL LISTED
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
AIR
AutoCAD SHX Text
FLOW
AutoCAD SHX Text
ANCHOR BY G.C.
AutoCAD SHX Text
WASHER BY G.C.
AutoCAD SHX Text
BOLT BY G.C.
AutoCAD SHX Text
BRACKET WELDED TO RACK
AutoCAD SHX Text
RACK RESTRAINT BY OMNI TEMP
AutoCAD SHX Text
CONCRETE PAD BY G.C.
AutoCAD SHX Text
RACK FRAME
AutoCAD SHX Text
RACK FRAME
AutoCAD SHX Text
COVER BY G.C.
AutoCAD SHX Text
ROOF LINE
AutoCAD SHX Text
SHEET METAL PLATFORM
AutoCAD SHX Text
IN PLATFORM BY G.C.
AutoCAD SHX Text
ANCHORING BEAM
AutoCAD SHX Text
ANCHOR BY G.C.
AutoCAD SHX Text
WASHER BY G.C.
AutoCAD SHX Text
BOLT BY G.C.
AutoCAD SHX Text
BRACKET WELDED TO RACK
AutoCAD SHX…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .