13-TRN2133001B1 Specifications and Requirements.pdf

SPECIFICATIONS AND REQUIREMENTS

TRANSIT SHELTERS AND AMENITIES (FTA)

A. GENERAL INFORMATION / DESCRIPTION

1. The purpose of this solicitation is to secure an open-end contract for Transit Shelters and

Amenities for the Broward County Transportation Department and various other Broward County agencies that may have need of these services and products. The products will be stored for future installation as required.

B. REQUIREMENTS

1. Submittals

1.1. Product Data: For each type of product indicated.

1.2. Samples for Initial Selection: For units with factory-applied color finishes.

1.3. Installation Information: Installation manuals, including required torquing.

1.4. Maintenance Data: For site furnishings to include maintenance manuals.

1.5. Warranty Information: For each type of product indicated.

1.6. Signed & sealed drawings & calculations (2 hard copies for each shelter/amenity purchased)

C. SUBMISSION

1. Submit manufacturer’s product data, storage and handling requirements and recommendations, installation methods and available colors, styles, patterns, and textures based on the drawings and specifications.

2. Inspections, Sample, and Prototypes:

2.1. The County reserves the right to request product inspections / product samples at any given point prior to or during manufacturing. All such requests shall be made as required under this contract to verify compliance with the specifications.

2.2. Contractor shall submit the applicable manufacturer’s shop drawings, products samples, product data, samples of materials/finishes, and colors for all products specified in the Solicitation Documents (which requires record/owner’s approval) and, as specified by the applicable Building Code, shall be conducted within twenty

(20) business days of the Purchase Order. The costs of such submittals are the sole responsibility of the Contractor and shall be included in bid price.

3. COMPLIANCE CERTIFICATES

3.1. Stainless steel materials composition and properties: Submit certificates attesting to the quality, material grade, material chemical composition & compliance with American Society for Testing and Materials (ASTM) standards.

3.2. Steel Materials Composition & Properties: Submit certificates attesting to the quality, material grade, material chemical composition & compliance with ASTM standard.

3.3. Welding Fabrication: Submit certificates of compliance to American Welding Society (AWS) specified requirements.

3.4. Stainless Steel Production & Finishing: Submit samples (as needed) of surface finish for approval.

3.5. Welding procedure: Submit qualified welding procedure for all fabricated subassemblies to be manufactured in compliance with AWS. Submit prior to start of first fabrication.

3.6. Shop Drawings: Submit drawings that contain all detailed connections, material and finish, type of weld joints and specific hardware information. Submit prior to start of first fabrication.

4. QUALITY ASSURANCE CONTROL

4.1. Manufacturer to QA/QC each item/product prior to shipping

4.2. Manufacturer to provide checklist and signoff for each item/product shipped to confirm quality, quantity and workmanship of each item/product.

4.3. Any incorrect, missing, damaged or inferior item/product will be replaced at the cost of the vendor/manufacturer.

D. ADDITION DELETION OF PRODUCTS

1. The County reserves the right to add products to this Contract. Additions may result from, but are not limited to, additional needs and product replacements. Successful Contractor(s) shall provide the County with a proposed price. If the price offered is not acceptable to the County, the County reserves the right to procure the products from other sources.

2. Any items added to the Contract must be approved by the Director of Purchasing or designee prior.

3. Any proposed product additions offered shall satisfy all criteria specified in the solicitation documents and the terms of the Contract.

4. The County reserves the right to delete products from this Contract in the best interest of the County. In such events, Contract prices will not be adjusted. No guarantee is expressed or implied as the total quantity of commodities/services to be purchased under any open-end Contract.

E. BID TABLE KALEIDOSCOPE TRANSIT SHELTER (OR APPROVED EQUAL)

The major components of the Kaleidoscope Transit Shelter include the following:

1. Product Description: The product must pass ASTM, BIFMA (Business and Institutional Furniture Manufacturer's Association), or current accepted Industry Standards. Basic Use:

For heavy, outdoor use in public spaces.

2. Canopies: Canopy structure consists of 1-1/4” diameter 1018 steel bars, cut and formed in 3/8” (thick) x 2” (wide) steel bars, and two 6” diameter steel disks 1-5/8” thick. Canopy frames consist of various aluminum extrusions and castings, rolled, milled, and welded together. All aluminum extrusions are made of 6105-T5. Canopy frames are joined together with steel splice locks. Canopy consists of rain gutter assembly.

3. Canopy Panels: Solid 16-gauge steel canopy panels.

4. Finishes: The finish on all applicable metals is to be a finishing process that includes a rust inhibitor and topcoat finish of thermosetting polyester powder coat finish that is U.V, chip, & flake resistant.

5. Walls: Wall frames shall consist of various milled aluminum extrusions. Aluminum extrusions are made of 6105-T5. Wall horizontal and vertical structural extrusions are 2” diameter. The key bars used are intended to transfer applicable wind loads to the posts which are fabricated of steel.

6. Wall Panels: Applicable wall panels shall be perforated panels and constructed from 14-gauge steel. The perforation pattern shall be ¼” square holes at 7/16” centers. The proposed and intended pattern is linear and repeats.

7. Leaning Rails: The proposed leaning rail consists of two cast brackets made of 319 aluminum that support a 3” O.D. x .120” (thick) wall steel tube.

8. Attached Seat Supports: Shaped 3/8” thick steel end plates are welded to horizontal steel tubes. Presidio backed straight seats with intermediate arms shall be attached with factory provided hardware.

9. Fasteners: All mechanical fasteners shall be Stainless Steel (308 Grade minimum).

10. Product Specifications: The proposed Kaleidoscope Transit Shelter must be engineered in full compliance with the latest edition of the Florida Building Code (FBC) and the applicable High Velocity Wind Zone criteria.

11. LIGHTING: BY URBAN SOLAR OR APPROVED EQUAL

11.1. 8W LED Luminaire

11.2. RMS-80K Solar Array secured to roof (or approved equal).

11.3. RMS-80K Module secured to roof with self-tapping screws.

11.4. Solar array (W): 80

11.5. Nom. System voltage (VDC): 12

11.6. Max. Battery Bank (AH): 72

11.7. Battery Type: Sealed Lead Acid (SLA)

11.8. Controller: USC ECM

11.9. Chassis Material: Aluminum

11.10. Chassis Coating: Powder Coat

11.11. System weight w/4 Batteries (LBS): 81

11.12. Unit shall be capable of dusk-to-dawn illumination. Solar powered LED lighting.

Electrical System to be UL Listed (Individual components and as a unit indicating that the entire product has been tested and works safely upon delivery)

12. All exposed electrical cabling and materials to be marked (“Sunlight Resistant” or

“SUNRES”) sunlight resistant as per applicable codes as described in NEC Section 310- 8.

13. Associated Furnishings shall include:

13.1. One (1), 3-seat backed Presidio, or approved equal, bench with intermediate and end armrests.

13.2. Custom 1-seat Presidio, or approved equal, bench with intermediate & end armrests with a customized support base.

F. BID TABLE CITY OF SUNRISE CUSTOM BUS SHELTERS OR APPROVED EQUAL

1. Manufacturer: Landscape Forms, Inc. (or approved equal), 7800 East Michigan Avenue, Kalamazoo, Michigan 49048.

Contact: Michelle Montesano – 305-975-4302 – MichelleM@landscapeforms.com Contact: Jarred Beall – 269-276-4506 – Jarredb@landscapeforms.com

2. Product Description: City of Sunrise Custom Bus Shelters by Landscape Forms, Inc. (or approved equal). The product must pass ASTM, BIFMA (Business and Institutional Furniture Manufacturer's Association), or current accepted Industry Standards. Basic Use:

For heavy, outdoor use in public spaces.

3. Style: SF3209-014: City of Sunrise 4-Seater – 2 Post Custom Bus Shelter.

4. Roof size: 17'-7 5/16" x 5’.

5. Associated Furnishings shall include Presidio 2-Seat Bench with 2 arm rest between seats in bay 1 and 3 (mounted to shelter structure).

6. Mounting: Surface mounted above grade.

7. Canopy Lighting: Solar LED lighting: RMS-100 RAD-42 solar powered LED lighting package (or approved equal), mounted to the roof, including photovoltaic panel(s), storage batteries, 12V lighting controller, mounting brackets, hardware, and LED luminaires. Unit shall be capable of dusk-to-dawn illumination. Electrical System to be UL Listed mailto:MichelleM@landscapeforms.com mailto:Jarredb@landscapeforms.com

(Individual components and as a unit indicating that the entire product has been tested and works safely upon delivery).

8. Materials:

8.1. Base Plate: Carbon Steel 1"

8.2. Columns: Carbon Steel HSS 6x4x1/4”

8.3. Cantilevered Arms: Carbon Steel HSS 4x4x1/4”

8.4. Roof: Carbon Steel Sheeting: 7GA

8.5. Roof Cover Panel: Carbon Steel Sheeting: 12GA

8.6. Side Panels: Carbon Steel and Acrylic: 10GA and 1/4"

8.7. Louvers: Carbon steel 10GA

8.8. Seat Supports: Carbon Steel: 1/4"

8.9. Hardware: 18-8 Stainless Steel

8.10. Anchoring: Low profile anchor bolts per structural drawings

9. Packaging Recycled Content:

9.1. Recycled Material Content: Minimum 65 percent.

9.2. Post-Consumer Material Content: Minimum 50 percent.

9.3. Pre-Consumer Material Content: Minimum 15 percent.

9.4. Recyclable: 100 percent.

10. Finishes: Finish on Metal: Landscape Forms, Inc. “Pangard II” or approved equal.

10.1. Primer: Rust inhibitor.

10.2. Topcoat: Thermosetting TGIC polyester powder coat. UV, chip, and flake resistant.

10.3. Test Results: “Pangard II” or approved equal.

- Gloss Consistency, Gardner 60 Degrees, ASTM D 523: Plus or minus 5 percent from standard.

- UV Resistance, Color and Gloss, ASTM G 155, Cycle 7: Delta E less than 2 at 2.0 mils and less than 20 percent loss.

- Cross-Hatch Adhesion, ASTM D 3359, Method B: 100 percent pass.

- Flexibility Test, Mandrel, ASTM D 522: 3 mm at 2 mils.

- Erichsen Cupping, ISO 1520: 8 mm.

- Impression Hardness, Buchholz, ISO 2815: 95.

- Impact Test, ASTM D 2794: 60 inch-pounds at 2.5 mils.

- Pencil Hardness, ASTM D 3363: 2H minimum.

- Corrosion Resistance, 1,500-Hour Test, ASTM B 117: Max undercutting 1 mm.

- Humidity Resistance, 1,500-Hour Test, ASTM D 2247: Max blisters 1 mm.

10.4. Colors: White, Titanium, and Nutmeg (or Approved Equal).

11. Fasteners: All mechanical fasteners shall be Stainless Steel (308 Grade minimum).

12. Product Specifications: The proposed City of Sunrise Custom Bus Shelter must be engineered in full compliance with the latest edition of the Florida Building Code (FBC) and the applicable High Velocity Wind Zone criteria.

13. All exposed electrical cabling and materials to be marked (“Sunlight Resistant” or “SUNRES”) sunlight resistant as per applicable codes as described in NEC Section 310- 8.

G. BID TABLE BCT MAP CASE OR APPROVED EQUAL

1. Manufacturer: Sesco, 250 Catalonia Ave, Suite 804, Coral Gables, FL 33134 Contact: Luis Salazar – 786-393-2501 – salazar@sescolighting.com

2. Product Description: BCT map case holder by Sesco (or approved equal). This product must pass ASTM, BIFMA (Business and Institutional Furniture Manufacturer's Association), or current accepted Industry Standards. Basic Use: For heavy, outdoor use in public spaces. BCT logo an design shall be fabricated using CNC technology.

3. Size: Display Case – 39.5” wide x 43.5” tall x 5.75” depth;

4. Mounting: Surface mounted above grade

5. Materials:

5.1 Structural Support Tubes: 6061-T6, aluminum

5.2 Sheet metal: 5052, aluminum

5.3 Display case lens: 0.125” thick impact and UV resistant acrylic

5.4 Display case insert: sheet aluminum painted white

5.5 Base cover: 0.125” thick formed aluminum

6. Pretreatment:

6.1 Tecnoclean emersion agitated & filtered to remove suspended solids

6.2 Aluminum-cleaner -etch

6.3 Deoxidizer

6.4 Water rinse DTS – 1,000 PPM

6.5 Water rinse DTS – 500 PPM

6.6 Chromicoat L25 – T3 Chromate conversion coating

7. Finishes:

6.1 Snap frames: anodized aluminum

6.2 Display sign: powder coated to marine grade standards and adhere to AAMA 2604 standards with chromate conversion coating

8. Anchors: All anchors to be constructed of 0.5” thick 6061-T6 aluminum to meet FBC requirements

9. Product Specifications: The proposed BCT map case must be engineered in full compliance with the latest edition of the Florida Building Code (FBC) and the applicable High Velocity Wind Zone criteria. All welding shall be performed and adhere to AWS standards. Welders shall be AWS certified and welding shall meet FBC requirements.

mailto:salazar@sescolighting.com

H. BID TABLE DURACELL BATTERY

1. Manufacturer: Duracell or Approved Equal

Product: DURA12-18NB

2. Product Description: General purpose battery for electric power systems.

3. Specifications:

a. Voltage: 12 Volt

b. Nominal Capacity: 18.0AH

c. Max Discharge Current: 180A (5s)

d. Dimensions: 7.14” x 3.03” x 6.59”

e. Weight: 11.9 lbs.

f. Ratings: UR, ISO9001 & ISO14001

I. BID TABLE POWER SONIC BATTERY

1. Manufacturer: Power Sonic or Approved Equal Product: PS-12180

2. Product Description: General purpose battery for electric power systems.

3. Specifications:

a. Voltage: 12 Volt

b. Nominal Capacity: 18.0AH

c. Max Discharge Current: 270A (5s)

d. Dimensions: 7.13” x 3.00” x 6.59”

e. Weight: 12.32 lbs.

f. Ratings: UL, ISO09001

J. FABRICATION

1. Shop fabricated bus shelters.

2. No welding, painting, cutting on site. Products to be manufactured in a controlled environment and to be assembled with bolt connections.

K. BID TABLE (ALL GROUPS)

1. Products identified in Bid Table can be found in the documents titled EXHIBIT A -

SALIENT CHARACTERISTICS and are used to describe essential physical and functional features of the material/products required.

L. DELIVERY, PACKING, AND ACCEPTANCE

1. Assembly and shipping of units are to be done on a per bus-stop basis. All applicable parts of a bus shelter are to be packaged per complete shelter unit as instructed on Purchase Order and shipped accordingly. Purchase Orders issued will include the associated bus stop identification numbers, which shall be clearly labeled on all packaging.

2. Corrosion-resistant anchor bolts for surface mount option shall be coordinated and furnished by vendor whom is awarded this contract.

3. Production Time: Orders are filled to meet pre-determined schedules. Maximum lead time for production shall be 112 calendar days from issuance of Purchase Order. Although, actual requested date or number of calendar days for delivery are specified, state on the BID TABLE the number of calendar days required to make delivery after issuance of purchase order or request for services.

4. However, goods required for daily use or where the delivery is an: emergency, a replacement, or an overdue product, the delivery convenience of the County shall govern.

If, in calculating the number of calendar days from the order date, the delivery date falls on a Saturday, Sunday or holiday, delivery shall be made not later than next succeeding business day.

5. Prices quoted shall be F.O.B. Destination and inclusive of all costs. Fuel costs current/anticipated shall be included. Delivery locations could vary throughout each of the municipalities within Broward County.

6. Failure to meet these delivery requirements may be deemed non-responsive.

7. The products will be stored at city storage facilities for the purpose of future installations under a separate construction contract.

M. MANUFACTURER / VENDOR QUALIFICATIONS

1. Manufacturer’s products are supported with complete engineering drawings (as applicable in compliance with the latest Florida Building Code), specifications, design patents, warranty, pictures, and brochures.

2. Vendor shall provide three (3) references for successful delivery of similar transit shelter projects within the last five (5) years, including contact information and project details.

3. Manufacturer’s welders must be currently certified in accordance with applicable industry standards including but not limited to the American Welding Society (AWS) or equivalent.

Upon request by the County, the Manufacturer shall provide documentation demonstrating that personnel performing welding work hold current certifications applicable to the welding processes and material utilized in the manufacture of the products being supplied post award prior to manufacturing.

N. WARRANTY – STANDARD WARRANTY

1. Warranty applicable to the items bid shall be specified in the Bid Table.

2. A minimum three-year warranty shall be provided for all trash cans, bike racks & benches.

Warranty does not apply to damage resulting from accident, misuse, tampering, or abuse.

Contractor shall, repair, replace, or refund the purchase price of any items found defective within the warranty period. Any warranty offered is the manufacturer’s warranty with Broward County recorded as the original purchaser.

3. A minimum three-year warranty shall be provided for Kaleidoscope and City of Sunrise custom bus shelters and warranty to also include any additional coverage provided by manufacturing subcontractors for applicable parts. Warranty does not apply to damage resulting from accident, misuse, tampering, or abuse. Contractor shall, repair, replace, or refund the purchase price of any items found defective within the warranty period. Any warranty offered is the manufacturer’s warranty with Broward County recorded as the original purchaser.

4. All applicable Manufacturer’s product(s) warranty(s) shall be provided to Broward County upon delivery, inspection and final acceptance of all ordered items.

O. REPLACMENT PARTS

1. Replacement parts for the pre-manufactured site furnishings/amenities must be available for purchase at least 10 years after delivery and acceptance of product. Replacement parts are to be manufactured and delivered between 6-8 weeks after order.

[REMAINDER OF THIS PAGE LEFT INTENTIONALLY BLANK]

Product Data Sheet

1 Revised December 19, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Plexus

Seat

• �Plexus wire grid panel is constructed of 5/16" perimeter and reinforcement wires (on 2-1/2" centers), with 1/8" cross wires on 1/2" centers.

• �Wire grid is welded into a frame formed of tubular steel that is 7/8" o.d., and has .120" wall thickness.

• �Arms are constructed of tubular steel 7/8" o.d., .120" wall thickness.

• �Tables have the same basic wire grid panel and are offset to align with front of backed seat.

• �Receptacles are constructed with 7/8" diameter tubular steel rings at the top and bottom of the grid panels.

• �Litter receptacle lids are formed of spun metal, liners of polyethylene.

• �Hardware for seats, tables, arms and horizontal tube sections is shipped with each order.

• �Hardware for anchoring supports is NOT included.

• �Surface and wall mounted supports are drilled to accept up to 1/2" anchor bolt of non-corrosive material.

Suggested Groupings

• �Basic groups can be arranged in nearly unlimited configurations.

• �A few examples are shown on this page.

• �Seats (with or without back) and tables may be interchanged in any combination in most of these examples.

Support Options

There's a reason some things endure. Like Plexus, they simply get it right. This Roscoe award-winning design expresses the happy orchestration of form, function and material invention. Plexus wrote the vocabulary for wire grid in outdoor seating and captured the imagination of designers in the process.

Straight Two-Unit

Group

Straight Three-Unit

Group

Straight Four-Unit

Group

Straight Five-Unit

Group

48" 72" 96" 120"

Exhibit A - Salient Characteristics Bid No. TRN2133001B1

Plexus

Revised December 19, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Horizontal Tube

• �A 3" o.d. horizontal tube forms the spine of the Plexus Collection.

• �Seats and tables have welded adapters which mate with adapters on the horizontal tube.

• �This creates an opportunity for the designer to specify seats and tables in a variety of configurations.

• �Straight tubes come in standard lengths of 24" for single seat (may not be freestanding), 48" for two seats, 72" for three seats, 96" for four seats and 120" for five seats.

• �There are two supports for each standard run of seats.

• �The horizontal tube and supports will be the same color as the seats and tables.

• �All fastenings for assembling the units and attaching the arms are included.

• �Hardware for mounting supports to the floor or walls is NOT provided.

Horizontal Tube

Supports for Seating and Tables

Standard Dimensions

Embedded

10" 10" 10"

Coupling sections for joining 3" horizontal steel tubes are available for freestanding units.

Surface Mount Wall Mount

28"

30"

27"

22" 22"

24" Standard Spacing

22"2" 2"

22" 5"

28"

14"

22"

11" 11"

14"

Plexus

Revised December 19, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Embedded Support

• 2-1/2" o.d. steel tube for embedding in concrete.

• Tube is 29" long.

Surface Mount Support

• 2-1/2" o.d. steel tube with round 5/16" x 5-1/2" diameter floor flange.

• Bolts for attaching unit to surface are NOT included.

• Cover plate is 1-1/2" high x 6" diameter.

Wall Mount Support

• 3/8" thick steel support with standard coupling welded to 3/8" x 3" steel wall plates.

• Bolts for attaching unit to wall are NOT included. (Mounting bracket slopes down when used with backless seats.)

Component Straight Run

Backed Seats

Optional arm rests are available for all seats with backs and can fit between seats or at the end of a run of seats. Constructed of 7/8" diameter tubular steel.

Specify number and location of arms needed per run.

22" x 28" Straight seat with back for straight run applications

Backless Seats

22" x 22" Square flat seat or table

Companion Table for Backed Seats

22" x 22" For use with straight seat with back

22"

22"

22"

Plexus

Revised December 19, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Litter Receptacles

• Feature a powdercoated metal grid body with a hinged door that opens to the side, allowing the liner to slide out for emptying.

• A metal latch secures the door when the unit is in use.

• Offered in 16" sizes\ (15 gallon capacity) and 20" size

(30 gallon capacity).

• Either size may be specified side or top opening.

• Both receptacles are standard with freestanding/surface mount capability.

• The lid is formed of spun metal and the coordinating polyethylene liner matches the standard powdercoat color selected for the receptacle.

Finishes

• All metal is finished with Landscape Forms' exclusive Pangard II® polyester powdercoat – a hard, yet flexible finishing process that resists rusting, chipping, peeling and fading.

To Specify Seating, Tables, Arms

• Specify Plexus bench and number of units (seats).

• Specify support style and powdercoat color.

• Choose number and location of arms per run.

To Specify Litter Receptacles

• Specify side or top opening, size and powdercoat color.

Visit landscapeforms.com for more information. Specifications are subject to change without notice. Landscape Forms supports the Landscape Architecture Foundation at the Second Century level.

©2025 Landscape Forms, Inc. Printed in U.S.A. All Rights Reserved.

landscapeforms.com | specify@landscapeforms.com

Litter Style Diameter Height Height Weight

Top Opening:

Freestanding/ Surface Mount

Only

20" 36" 39.25" 75 lbs.

Side Opening:

Freestanding/ Surface Mount

Only

20" 40" 39.25" 73 lbs.

Presidio

Revised August 20, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Seat

• �Presidio seating is offered with or without backs. Arms may be specified for either style.

• One arm – left or right side – or two arms may be specified per seat.

• Left or right arm is determined from the position of sitting in the seat.

• �Presidio seating may be specified in several lengths of straight runs.

• �Presidio seats are framed by 1-1/4" o.d., .120 wall steel tube with four mitered corners.

• �The insert panel is constructed of 5/8" o.d. round steel rods welded to the steel frame.

• �Arms are 1-1/4" o.d., .065 wall thickness steel tube, welded to the seat frame.

• Hardware to attach seats to horizontal tube is shipped with each order.

• Hardware for anchoring supports is NOT included.

Distinctive

• �The Presidio Collection, designed by Brian Kane, combines graceful contours with durable materials to provide an elegant, yet secure solution for unprotected public spaces.

Durable

• �Presidio seats and receptacles feature solid metal rods, welded to tubular steel frames.

• Arms are tubular steel, welded to the seat frame.

• �Seats bolt securely to a horizontal tubular steel support which may be freestanding, surface mounted or embedded.

Presidio, designed by Brian Kane, combines graceful contours with durable materials to provide an elegant, yet secure solution for unprotected public spaces.

Backed Straight Seats

Backed seat with no arms

Backed seat with two arms

Backed seat with right arm

Backed seat with left arm

22 1/2" x 30" Note: Straight seat with back for straight run applications.

22 1/2"

Straight Seats without Backs

Seat without back with no arms

Seat without back with two arm

Seat without back with one arm.

Seat may be mounted to provide arm on left or right

22" x 22" Seat without back for straight run.

22"

Presidio

Revised August 20, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Horizontal Tube Supports

• Seats are mounted on a dual 2-1/2" horizontal tube support.

• �Adapters are welded onto the tubes, matching adapters are welded to seats.

• Seats are easily secured to supports with supplied bolts.

• Supports may be specified freestanding, surface mount or embedded.

• �Tubes come in standard lengths of 46" for two seats, 69" for three seats, 92" for four seats and 115" for five seats.

• There are two vertical supports for each standard straight run of seats.

• Supports will be the same color as the seats.

• All fastenings for assembling the units are included.

• Hardware for surface mounting supports is NOT provided.

Embedded Support

• 2 1/2" o.d. steel tube for embedding in concrete.

Surface Mount Support

• �2 1/2" outer diameter steel tube with round 3/8" x 5 1/2" diameter floor flange.

• �Metal 1 1/2" x 6" diameter cover plate with three, 9/16" diameter through holes comes standard.

• Bolts for anchoring to surface are NOT included.

Freestanding Support

• �2 1/2" o.d. steel tube with adjustable glides.

Suggested Groupings

• A variety of configurations is offered with Presidio.

• A few examples are shown on this page.

• �Seats with or without backs may be interchanged in any combination in these examples.

Horizontal Tube

Supports for Seating

Embedded Surface Mount with

Cover Plate Freestanding

20"

14"

4"1 "14

Suggested Groupings

206" with Backs / 214" without Backs Clear Inside Diameter

265" with Backs / 257-1/2 " without Backs Outside Diameter

118" RADIUS

Straight three-unit group

Straight two-unit group

Straight four-unit group

Straight �ve-unit group

“Ell” shape

(4) straight units

(4) angled units

118" radius uses angled and straight units 4 units form 45° arc

46"

Full circle – 60" radius, (16) angled units

69"

92"

115"

118" RADIUS

60"RADIUS

148" with Backs / 140-1/2" without Backs Outside Diameter

88-1/2" with Backs/96" without Backs Clear Inside Diameter

60"RADIUS

Semi-circle – 118" radius, 8 angled, 8 straight units

Note: The 118" radius is formed of straight and angled seats.

Each run begins seat.

with an angled

206" with Backs / 214" without Backs Clear Inside Diameter

265" with Backs / 257-1/2 " without Backs Outside Diameter

118" RADIUS

Straight three-unit group

Straight two-unit group

Straight four-unit group

Straight �ve-unit group

“Ell” shape

(4) straight units

(4) angled units

118" radius uses angled and straight units 4 units form 45° arc

46"

Full circle – 60" radius, (16) angled units

69"

92"

115"

118" RADIUS

60"RADIUS

148" with Backs / 140-1/2" without Backs Outside Diameter

88-1/2" with Backs/96" without Backs Clear Inside Diameter

60"RADIUS

Semi-circle – 118" radius, 8 angled, 8 straight units

Note: The 118" radius is formed of straight and angled seats.

Each run begins seat.

with an angled

206" with Backs / 214" without Backs Clear Inside Diameter

265" with Backs / 257-1/2 " without Backs Outside Diameter

118" RADIUS

Straight three-unit group

Straight two-unit group

Straight four-unit group

Straight �ve-unit group

“Ell” shape

(4) straight units

(4) angled units

118" radius uses angled and straight units 4 units form 45° arc

46"

Full circle – 60" radius, (16) angled units

69"

92"

115"

118" RADIUS

60"RADIUS

148" with Backs / 140-1/2" without Backs Outside Diameter

88-1/2" with Backs/96" without Backs Clear Inside Diameter

60"RADIUS

Semi-circle – 118" radius, 8 angled, 8 straight units

Note: The 118" radius is formed of straight and angled seats.

Each run begins seat.

with an angled

Presidio

Revised August 20, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Finishing

• �All metal is finished with Landscape Forms’ exclusive Pangard II® polyester powdercoat process which forms a surface that resists rusting, chipping, peeling and fading.

To Specify Seating

• �Specify Presidio bench and select seat and/or groupings. Choose backed or backless, if applicable arm placement, support style, and powdercoat color.

Designed by Brian Kane

Click here for patent information related to this product.

Visit landscapeforms.com for more information. Specifications are subject to change without notice. Landscape Forms supports the Landscape Architecture Foundation at the Second Century level.

©2025 Landscape Forms, Inc. Printed in U.S.A.

landscapeforms.com | specify@landscapeforms.com

Standard Dimensions

22"

11" 11"

30"

15" 15"

23" 23"

69"

23"1/2" 1/2"

13"

7"

8" https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.landscapeforms.com%2Fpatents%2FDocuments%2FLF%2520Patent%2520List.pdf&data=04%7C01%7CKariB%40landscapeforms.com%7Cb456676a5d98406ce10e08d9f706fdba%7C93631bcae69b44afabb5d475083f6f17%7C0%7C0%7C637812431673828492%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5k6mO%2Fo%2Bkomkn2Ifty9l5C2lnH7mcmru%2BSXdha0xdF8%3D&reserved=0

Metro40 Collection

1 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

When Landscape Forms set out to develop the first comprehensive and integrated collection of site elements for the streetscape and transit core, it partnered with a world-leading expert. BMW Group Designworks brought to the challenge a deep understanding of the role of public transit in the life of the city, and unsurpassed mastery in form making and innovative use of materials. The Metro40 Collection, from benches and bollards to bus shelters and LED lighting, is a pioneering line of urban streetscape and transit elements with sophistication and global appeal for a world on the move. Used with Connect shelter or alone where space is at a premium, sitting and leaning rails provide a ‘waiting room’ amenity with minimal footprint.

Rest™ Bench

• Rest length is 80", longer than typical three-person benches.

• Rest seat height is 18" and seat depth is 16".

• Optional arms (available only on backed version)

• �End frames are joined using concealed mortise and tenon connections.

• �Available with one or two optional intermediate cast aluminum seat dividers/skateboard deterrents.

• �Equipped with “anti-glides:” cushioned plastic pads on the underside of the frame that keep the bench from moving under seated loads and protect the powdercoat finish from becoming scratched by concrete or floor.

Materials

• �End frame is cast aluminum.

• �Seat and back slats are aluminum extrusions or wood.

• �Cast aluminum frame and aluminum extrusion slats are powder-coated.

• �Aluminum version can be two-toned: one color on the continuous ribbon end frame and another color on the slats.

• �The wood for exterior applications is jarrah.

• �The wood option for interior application is jarrah with LF 80 finish.

Installation

• �Shipped fully assembled.

• �Freestanding, surface mount or embedded.

• �Surface mount and embedded versions are shipped with a mounting kit.

Style Depth Width Height Product Weight backed w/ arm

26 1/2" 80" 33 1/4" Jarrah: 135 lb Alum: 167 lb backed w/o arms

26 1/2" 80" 33 1/4" Jarrah: 125 lb Alum: 157 lb backless 20 3/4" 80" 18" Jarrah: 91 lb Alum: 106 lb

Rest Surface Mount Locking System

Note: The backless version is always armless.

Seat dividers cannot be used at ends as a substitute for arms.

2 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Connect Rail

• Connect Rail is available as a sitting rail or a leaning rail.

• Rail ships fully assembled.

• Rail must be surface mounted.

• �Aluminum option is a cast aluminum frame with an aluminum extrusion insert.

• Wood option is a cast aluminum frame with a wood insert.

Finishes

• �Metal is finished with Landscape Forms’ proprietary Pangard II® polyester powdercoat, a hard yet flexible finish that resists rusting, chipping, peeling and fading.

• Call for standard color chart.

• Unfinished jarrah and DSTMA for exterior use.

Style Depth Width Height Product Weight

Sitting Rail 7" 45" 18" Aluminum

46 lb

Sitting Rail 7" 45" 18" Wood 43 lb

Leaning Rail 6.5" 45" 30" Aluminum

51 lb

Leaning Rail 6.5" 45" 30" Wood 54 lb

3 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Style Depth Width Height Product Weight

30-gallon top-opening freestanding litter

15.9" 23.5" 37.9" 140 lb

23-gallon side-opening freestanding litter

15.9" 23.5" 37.9" 145 lb

Collect Recycling Hole and Slot Tops

30-Gallon Recycle Receptacle with Hole

30-Gallon Recycle Receptacle with Slot

30-Gallon Recycle Receptacle with Multi Use

Collect™ Litter

• �All Collect receptacles have a cast aluminum frame and rotationally-molded polyethylene bin.

Top-opening

• �30-gallon capacity.

• �Freestanding or surface mount.

• �Freestanding version has a cast iron base.

• �Bin pivots open for emptying; bag is pulled out at a 35° angle.

• �Bag is attached by clips to inside of molded bin.

• �No diverter rim.

• �Molded bin color comes standard in matte black;

optional polyethylenecolors available.

• �Side latch with optional keyed lock.

Side-opening

• �23-gallon capacity.

• �Open on two sides for easy trash toss.

• �Freestanding or surface mount.

• �Freestanding version has a cast iron base.

• �Bin pivots open for emptying; bag is pulled out at a 35° angle.

• �Bag is attached by clips to inside of molded bin.

• �Spun-steel diverter around top opening directs trash; diverter is connected to the ribbon frame and diverter is powdercoated matte black color to coordinate with the standard black bin. If an optional bin color is selected than the diverter is powdercoated to match the frame.

Collect Recycling Receptacles

• �30-gallon capacity.

• �Freestanding or surface mount.

• �Freestanding version has a cast iron base.

• �Bin pivots open for emptying; bags are pulled out at a 35° angle.

• �Bags attached by clips to inside of molded bin.

• �Side latch with optional keyed lock.

• �Visit landscapeforms.com for signage options.

23" 7.6"

17.4" 7.6"

4 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Collect Latch/Lock Mechanism

Collect Latch/Lock Mechanism

Latch/Lock Location and Operation

• �Latch is located on the side of the receptacle, within the ribbon.

• �When lockless, the latch is simply pushed to release the bin; bin is pushed back into place to automatically catch.

• �When locked, a key is used to free the latch before operation.

• �The lock is self-contained and can be retrofitted.

5 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Style Depth Width Height Product Weight

Surface Mount Bollard

19" 7" 34" 63 lb

Embedded Bollard

19" 7" 34" 75 lb

Removable Bollard

(not available with integral light)

19" 7" 34" 95 lb

Stop™ Bollard

• �Sleeve is cast aluminum with an integral ring at the base.

• �Aesthetically all mounting options look the same.

• �Post is 4" structural steel pipe.

• �Post is 28" high; the total height of the bollard from ground to top of aluminum casting is 34".

• �Base plate on surface-mounted bollard is stainless steel.

• �All exterior parts are powdercoated.

• �Sleeve can be powdercoated in a selection of colors.

• �Post is standard matte black.

Mounting Options

• �Stop may be embedded, surface mount or removable.

Embedded

• �This is the strongest and most common method for installation.

• �The steel post is set into an 18" concrete footing.

• �The steel post is slipped over the top of the post and locked into the base of the post with tamper-resistant set screws.

• �A stainless steel ring helps align and aid installation.

Surface Mount

• �The steel post on all surface mount versions aesthetically matches the embedded version but allows for more installations on existing sites.

• �A stainless steel base plate welded to the steel pipe is anchored to th concrete in three locations.

• �The stainless steel base plate helps align and aid installation.

• �3 stainless steel leveling glides allow installation to be perfectly

“dialed-in” from the top side of base.

• �The cast aluminum sleeve with integral base ring is slipped over the top and locked into the base of the post with tamper-resistant set screws.

Removable

• �The removable version aesthetically matches embedded and surface mount versions.

• �A galvanized socket is embedded in concrete.

• �The steel post is inserted into the socket, and secured with locking mechanism.

• �The cast aluminum sleeve with integral base ring is slipped over the top of the post and locked into the base of the post with tamper-resistant set screws.

Embedded, Surface Mount or Removable Bollard

Embedded or Surface Mount Bollard with LED Light

6 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

StyleTo Remove Bollard

• �Using key, turn locking mechanism to release post.

• �Remove sleeve and post together by lifting up and out.

• �Post and sleeve can be removed separately if preferred.

Note: Unlike some other removable bollards, Stop enables the post and sleeve to be removed as a single unit by one person. (Post and sleeve together weight approximately 60 lbs.) Care should be taken to set the sleeve in a place where it will be protected from damage while not in use.

LED Lighting

• �An optional wired LED light is available on both embedded and surface-mounted versions.

• �The light must be connected to the grid.

Features and Installation

• �The bollard light is designed for wayfinding applications, the process for guiding, directing and signaling people through space.

• �The light is mounted in the top of the bollard post.

• �Light shines upward from the fixture, illuminating the inside surface of the sleeve and filling the space between the top of the post and the underside of the ribbon.

• �The soft ambient glow from the LED light does not project light onto the ground or pathway.

• �The light cap employs the same Acrylite® lens technology as Hi-Glo and Lo-Glo lights.

• �To install, bring conduit up through the concrete into the bollard post.

• �60,000 hour LED rated life.

• �Power consumption is approximately 3 watts.

• �Lumen output is approximately 50 lumens.

• �Warm-white LED color temperature of 3500K.

LED Optic LED Light

AC Driver

7 Revised December 16, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Ride™ Bike Rack

• Capacity: 2 bikes

• Surface mount or embedded to concrete surface.

• �Requires only two bolts to mount, with extra surface mount anchor hole provided.

• �4 stainless steel leveling glides within the base are provided for fine adjustment from top side of base.

• Cover plate over bike rack base provides seamless appearance.

Hi-Glo™ Pedestrian Light and Lo-Glo™ Path Light

• �Please refer to product data sheets for technical information and specifications.

Connect 2.0

• �Please refer to the product data sheet for technical information and specifications.

To Specify

• �Visit landscapeforms.com.

Designed by BMW Group Designworks Click here for patent information related to this product.

Style Depth Width Height Product Weight

Bike Rack 3.3" 28" 26" 50 lb

Visit landscapeforms.com for more information. Specifications are subject to change without notice. Landscape Forms supports the

Landscape Architecture Foundation at the Second Century level.

©2024 Landscape Forms, Inc. Printed in U.S.A.

https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.landscapeforms.com%2Fpatents%2FDocuments%2FLF%2520Patent%2520List.pdf&data=04%7C01%7CKariB%40landscapeforms.com%7Cb456676a5d98406ce10e08d9f706fdba%7C93631bcae69b44afabb5d475083f6f17%7C0%7C0%7C637812431673828492%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=5k6mO%2Fo%2Bkomkn2Ifty9l5C2lnH7mcmru%2BSXdha0xdF8%3D&reserved=0

L I B R E E V O L U T I O N

Half SX Half DX Torsion SX Torsion DX Power Torsion Piana

Disponibile nei seguenti materiali e dimensioni:

Available in the following materials and sizes:

Disponible dans les dimensions et matériaux suivants:

Disponible en los siguientes materiales y tamaños:

Disponível nos seguintes materiais e tamanhos:

Erhältlich in den folgenden Materialien und Größen:

Acciaio Zincato e Verniciato / Galvanized and Powder Coated Steel Acier Galvanisé et Thermolaqué / Acero Galvanizado y Barnizado Aço Galvanizado e Pintado / Stahl, Verzinkt und Pulverbeschichtet

Acciaio Inox / Stainless Steel Acier Inox / Acero Inox Aço Inox / Edelstahl

Vedi disegni a pag.: / See drawings on page:

Voir plans page: / Vea los dibujos de la pág.:

Veja os desenhos em p.: / Siehe Zeichnungen auf Seite:

Fissaggio: / Fixings: / Fixation: / Fijación: / Fixação: / Befestigung:

Appoggio con piedini, predisposizione per tasselli, cementazione Free standing with pedestals, pre-drilled for anchors, below ground installation Posé sur pieds, réservation chevilles, scellement Apoyo con pies, predisposición para tacos, cimentación Apoio com pés-preparação para buchas, cimentação Freistehend mit Füßen, mit Bohrungen für Verschraubung, Zementierung

Alfredo Tasca

Libre Evolution:

Torsion Half Power benches

Product: LIBRE TORSION Nominated for the “Prix du Palmarès de l’ArchiDesignClub » 2013

697696

2'-2 3/4" 26.75

2'-2 3/4" 26.75

2'-2 3/4" 26.75

7'-5 1/4" 89.25

2'-5" 29.00

2'-5" 29.00

2'-5" 29.00

A

A

C

C

1/2" .50

1/2" .50

1/2" .50

1/2" .50

1/2" .50

1/2" .50

1/2" .50

1/2" .50

CUSTOM CHELSEA

PERF PATTERN

1/4" THICK SEAT PANEL

WELDED TO 3/8" THICK SEAT

SUPPORT AND MOUNTING PLATEEDGE PANEL EDGE PANELCENTER PANEL

6'-9 1/4" 81.25

ANCHOR SPACING

7'-3 1/4" 87.25

ANCHOR SPACING

6"

6.00

1'-8 1/16" 20.09

D

ISOMETRIC VIEW

SCALE 1:16

SEAT PANELS POWDER COATED:

MATTE BLACK

BENCH SUPPORT

POWDER COATED: SILVER

SECTION A-A

SCALE 1 : 4

3/8" THICK

BASE PLATE

DETAIL B

SCALE 1 : 4

3/8" THICK CAST ALUMINUM ARM

REST BOLTED TO FRAME

3/8" SS TAMPER PROOF FHCS SCREW

1/4" .22

1 15/16" 1.92

SECTION C-C

SCALE 1 : 4

SHARP CORNER

3X .69 11/16" THRU

(CLEARANCE HOLE FOR .625 BOLT

NOT INCLUDED)

3 1/2" 3.50

3"

3.00

DETAIL D

SCALE 1 : 8

NOTE:

1. LANDSCAPEFORMS' PANGARD II E-COAT AND POWDER COATED SILVER AND MATTE BLACK

2. ALL FASTENERS/HARDWARE TO BE STAINLESS STEEL.

3. NON-CORROSIVE ANCHORING HARDWARE SUPPLIED BY OTHERS.

AUTHOR: SS

TITLE: NYC CITYBENCH 2.0 - BACKED SCALE: 1:16

APPROVED

REVISE AND RESUBMIT

REJECTED

BY: DATE:

UNIT OF MEASURE: INCHES [FEET & INCHES]

CONFIDENTIAL DRAWING INFORMATION CONTAINED HEREIN IS THE PROPERTY OF LANDSCAPEFORMS. INTENDED

USE IS LIMITED TO DESIGN PROFESSIONALS SPECIFYING LANDSCAPEFORMS PRODUCTS AND THEIR DIRECT CLIENTS.

DRAWING IS NOT TO BE COPIED OR DISCLOSED TO OTHERS WITHOUT THE CONSENT OF LANDSCAPEFORMS

FILE NAME: CUS_SF0886-075

PROJECT: NYC CityBench

SHEET: 1 OF 3

DRAWING CREATED: Wednesday, March 31, 2021 DRAWING REVISION: 1

B-SIZE SHEET

431 LAWNDALE AVE. P 800.430.6209

KALAMAZOO, MI 49048 P 800.521.2546

USA landscapeforms.com

COMMENTS MADE ON THESE

SUBMITTALS ARE FOR INFORMATION

ONLY. ANY CHANGES REQUIRE

RE-SUBMITTAL AND APPROVAL.

CUSTOMER IS RESPONSIBLE FOR

CONFIRMING ALL QUANTITIES,

DIMENSIONS, AND INSTALLATION

TECHNIQUES.

Rlandscapeforms

Chase Park Litter

1 Revised December 18, 2025 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Designed and built to meet the rigors of urban spaces, Chase Park litters provide exceptional durability with a highly refined aesthetic.

Constructed of a cast aluminum body with a spun aluminum top, the litter features a hinged side panel door and options for signage in both top opening and side opening styles. Designed by Kipp Stewart.

Litter Receptacles

• Receptacle features a hinged side panel door for easy emptying.

• Constructed of cast aluminum sides and door, with spun aluminum top and polyethylene base.

• The standard black polyethylene base is prefilled with sand and then plugged. This allows the unit to be freestanding. There is also a slot in the base to allow for the unit to be surface-mounted.

• Door hinge and latch are carbon steel with a Magni-coat.

• Top and side-opening receptacle can be freestanding or surface mounted.

• Logo band available with both top opening and side-opening styles.

• Sand pan optional with side opening unit.

• Capacity of the top-opening receptacle is 40 gallons, for side-opening, 36 gallons.

• An optional keyed lock may be specified.

• Custom fit polyethylene liner in black, standard with all receptacles.

• Chase Park also available in a Dual-use, side opening receptacle and a single-use, top opening receptacle.

• Recycling litter available with 5", or 10" diameter top openings to collect recyclable material.

• Labels with recycle symbol and specified recyclable material printed on high performance, exterior grade UV protected vinyl, mounted securely to each unit.

• For more information on signage options, visit landscapeforms.com

Finishes

• All metal is finished with Landscape Forms’ proprietary Pangard II® polyester powdercoat, a hard yet flexible finish that resists rusting, chipping, peeling, and fading.

To Specify

• Specify Chase Park Litter and select style (side-open, top-open), single or dual-use, and optional opening style and signage.

• Choose powdercoat color, mounting, optional logo band and/or optional lock.

• Chase Park Litters ship fully assembled.

Designed by Kipp Stewart

Click here for patent information related to this product.

Style Diameter Height Product Weight

Top-Opening 24" 39" 166 lbs

Side-Opening 24" 39" 162 lbs

Top-Opening with logo band

24" 39" 175 lbs

10" Top-Opening with signage

24" 39" 167 lbs

Side-Opening Dual-use unit

24" 39" 163 lbs

Side-Opening Dual-use with logo band unit 24" 39" 172 lbs

Visit landscapeforms.com for more information. Specifications are subject to change without notice. Landscape Forms supports the Landscape Architecture Foundation at the Second Century level.

©2025 Landscape Forms, Inc. Printed in U.S.A.

landscapeforms.com | specify@landscapeforms.com https://www.landscapeforms.com/patents

1 Revised September 12, 2024 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Lakeside

Benches

• Benches are made with dual 1/4" thick steel frames, welded and bolted together with stainless steel hardware.

• Benches are 67" in length and available backed or backless.

• End arms standard on backed benches.

• Picket fence panels may be specified in Polysite™ or wood.

• All picket fence boards are attached to the steel bench frame with stainless steel hardware.

• Metal seats and seat backs are available in grass, leaf or custom designs which are plasma-cut steel panels, bolted to the bench frame with stainless steel hardware.

• Bench comes standard with freestanding/surface mount support.

• Metal panels may be designed with a custom pattern for minimal up charge. Ask your Landscape Forms representative for details.

Litter Receptacles

• Lakeside litter receptacles are available in side or top-opening designs.

• Side-opening litter receptacle has a 30-gallon capacity, top-opening has a 35-gallon capacity.

• Steel panels are available in grass, leaf, custom or plain designs which are plasma-cut steel.

• Litters come standard with a removable black polyethylene liner.

• Receptacles are standard with freestanding/surface mount base.

Designer Margaret McCurry started with steel side frames that recall platform swings. Her inspiration for the seating was a picket fence around a Victorian era cottage and reflections of forms in the outdoor environments. In the Lakeside bench, as in her architecture, the linkage is artfully transformed so, as she puts it, "the history and memory are there, but they're jogged a bit."

Bench Style Depth Width Height Weight

Grass Backless

19" 67" 18" 138 lbs

Grass Backed

25" 67" 35" 197 lbs

Leaf Backed

25" 67" 35" 197 lbs

PIcket Fence Backless

19" 67" 18"

Poly 125 lbs

Wood 108 lbs

Picket Fence Backed

25" 67" 35"

Poly 195 lbs

Wood 158 lbs

Litter Style Diameter Height Weight

Grass Side-Opening

21" 36" 101 lbs

Leaf Top-Opening

21" 36" 106 lbs

Plain Top-Opening

21" 36" 106 lbs

Lakeside

Revised September 12, 2024 | Landscape Forms Inc. | 800.521.2546 | F 269.381.3455 | 7800 E. Michigan Ave., Kalamazoo, MI 49048

Finishes

• Exterior woods are unfinished and will weather to a soft pewter gray, requiring no future maintenance.

• �Metal is finished with Landscape Forms' proprietary Pangard II® polyester powdercoat, a hard yet flexible finish that resists rusting, chipping, peeling and fading.

• �Call for standard color chart.

• �A wide array of optional colors may be specified for an upcharge.

To Specify Bench:

• ��Specify Lakeside Bench and select backless or backed. Choose either a panel design style (grass or leaf) and powdercoat color, or picket fence and polysite color or…