Replace Pump Station 659 Generator, GOGA

The Department of the Interior's National Park Service Pacific West Region is seeking a qualified small business contractor to replace the generator at Pump Station 659 in Sausalito, California, located within the Golden Gate National Recreation Area. The project involves removing an existing 43kW 480v Three-Phase Natural Gas Generator and installing a new unit with matching performance characteristics, including all necessary electrical, controls, gas, and mechanical exhaust connections. Contractors must possess a California Contractor State License Classification C-10 (Electrical Contractor) or A (General Engineering Contractor) and will be evaluated based on contractor license verification, technical capability, relevant experience, safety record, past performance, and price. The solicitation requires a site visit on February 20, 2025, with questions due by February 25, 2025, and quotations submissions due by March 4, 2025 at 12:00 PM local time. Key technical requirements include UL listing for the genset, full control accessibility, field measurement verification, and compliance with California Air Resource Board regulations.

This is a total small business set-aside contract with a NAICS code of 238210 and a size standard of $19 million, with an estimated project value between $25,000 and $100,000. The contractor must begin work within 10 calendar days after receiving the notice to proceed and complete the project within 30 calendar days, with a system shutdown not exceeding 90 minutes. Performance and payment bonds will be required, and work hours are limited to 8 a.m. to 5 p.m. Monday through Friday, excluding holidays. The place of performance is 659 Sommerville Road, Sausalito, California 94965, specifically at the lift station within the Golden Gate National Recreation Area. A portable generator will remain on-site during the replacement process, and the National Park Service will have a rental generator available until project completion. Contractors must also submit OSHA 300A logs for the previous three years and provide a one-year warranty on parts and labor for the new generator installation.