Am_0002_Section_B.xls

XLS spreadsheet 85 KB Posted Jul 28, 2017

Attached to: Drydock and Repair Dredge Wheeler
Solicitation number: W912P8-17-B-0032
Issued by: Department of the Army Corps of Engineers Engineering District New Orleans

About this file

From the source

Am_0002 - Excel Section B

View the file

Other files

File	Type	Posted
A22_-_W912P817B0032,_Am_0004.pdf	PDF	Aug 10, 2017
Am_0003.pdf	PDF	Aug 4, 2017
Am_0002_-_Sperry.pdf	PDF	Jul 28, 2017
Am_0002_-_70006-2560-055_(Overflow).pdf	PDF	Jul 28, 2017
Am_0002_-_70006-2724-003.pdf	PDF	Jul 28, 2017
Am_0002_-_70006-2726-003.pdf	PDF	Jul 28, 2017
AM_0002.pdf	PDF	Jul 28, 2017
Am_0002_-_Attachment_J-35_(Dredge_Pipes_in_Pump_Room_&_No_2_Voids).pdf	PDF	Jul 28, 2017
Am_0002_-_70006-5473-901.pdf	PDF	Jul 28, 2017
Am_0002_-_Attachment_J-34_(Hardox_400_Properties_and_Welding).pdf	PDF	Jul 28, 2017
Am_0002_-_70006-2730-006.pdf	PDF	Jul 28, 2017
Am_0002_-_SECTION__J_TOC.PDF	PDF	Jul 28, 2017
Am_0002_-_70006-2724-002.pdf	PDF	Jul 28, 2017
AM_0001.pdf	PDF	Jul 28, 2017
Am_0001.pdf	PDF	Jul 21, 2017
H01_-_11-06-11_(Bridge_Deck_Pltg_&_Framing_Below).pdf	PDF	Jul 20, 2017
H01_-_48-09-11_(Vents_Sounds_and_Overflows_FWD_FR_114).pdf	PDF	Jul 20, 2017
H01_-_11-05-042_(Center_Well_Bulkheads_(Sheet_2)).PDF	PDF	Jul 20, 2017
H01_-_Drawing_22-01-01_(Rudder).PDF	PDF	Jul 20, 2017
H01_-_48-01-11_(Bilge_&_Ballast_System_Aft_Fr_61).pdf	PDF	Jul 20, 2017
H01_-_48-23-02_(complete).pdf	PDF	Jul 20, 2017
H01_-_48-05-122_(SW_Cooling_-_Fwd_Fr_61_P-D).pdf	PDF	Jul 20, 2017
H01_-_45-01-21_L.O._FILL,_TRANSFER_&_PURIFYING_SYS.pdf	PDF	Jul 20, 2017
H01_-_70006-4013-907.pdf	PDF	Jul 20, 2017
H01_-_29-01-08_(2013_Stability_Book).pdf	PDF	Jul 20, 2017
H01_-_48-09-112.pdf	PDF	Jul 20, 2017
H01_-_48-01-121_(Bilge_&_Ballast_Piping_-_Fwd_Fr_114_L-M).pdf	PDF	Jul 20, 2017
H01_-_HPU_block_manifold_exploded_view.pdf	PDF	Jul 20, 2017
H01_-_48-08-15_(Diagram_Vacuum_Sewage_System).pdf	PDF	Jul 20, 2017
H01_-_48-05-221_(Dredge_Valve_SW_Flushing_Aft_Fr_114_LM).pdf	PDF	Jul 20, 2017
H01_-_48-09-121_(Vents-Sound_Fwd_Fr_144-61_LM).pdf	PDF	Jul 20, 2017
H01_-_11-03-052.PDF	PDF	Jul 20, 2017
H01_-_11-05-02_(Transverse_Blkds_Frs_84,_114,_132-136).pdf	PDF	Jul 20, 2017
H01_-_11-01-03_(Shell_Expansion_Fwd._Fr._114).pdf	PDF	Jul 20, 2017
H01_-_70006-2730-008_-_Supports_For_Suction_and_Delivery_Pipes_in_PR.pdf	PDF	Jul 20, 2017
H01_-_11-01-08_SH_1-4_(Hull_Insert_for_Trunnion).pdf	PDF	Jul 20, 2017
H01_-_29-01-03_(Sounding-Ullage_Tables).pdf	PDF	Jul 20, 2017
H01_-_48-09-111_(Vent-Sound-Fwd_114-LM).pdf	PDF	Jul 20, 2017
H01_-_11-04-03_(CVK_&_Girders_Fr_16-61).PDF	PDF	Jul 20, 2017
H01_-_38-10-18_(7_sheets).pdf	PDF	Jul 20, 2017
H01_-_11-06-01_(Hopper_Coaming).pdf	PDF	Jul 20, 2017
H01_-_2009-08-20_Wheeler_Ullages_Table_Report.pdf	PDF	Jul 20, 2017
H01_-_48-05-121_(Sea_Wtr_Cooling_-_Fwd_Fr_61_L-M).pdf	PDF	Jul 20, 2017
H01_-_48-01-111_(Bilge_&_Ballast_Piping_-_Aft_Fr_61_L-M).pdf	PDF	Jul 20, 2017
H01_-_19-06-01_(Zinc_Anode_Arrgt_&_Dets).pdf	PDF	Jul 20, 2017
H01_-_48-09-122_(Vents,_Sounds_&_Overflows_Fr_114-61_P-D).pdf	PDF	Jul 20, 2017
H01_-_70006-4013-910.pdf	PDF	Jul 20, 2017
H01_-_HYDRECO_Hydraulic_Gear_Pump_Manual.pdf	PDF	Jul 20, 2017
H01_-_48-17-252_(Jetting_&_Wash_Down_System_P-D).pdf	PDF	Jul 20, 2017
H01_-_11-03-02_AFTPEAK_FRAMING.pdf	PDF	Jul 20, 2017

Show 40 more

Latest 50 of 202 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

			SECTION B
			SUPPLIES OR SERVICES AND PRICE/COSTS
SECTION B
SUPPLIES OR SERVICES AND PRICES/COSTS
		NOTE 1: The bidder is required to bid on all line items. Failure to submit a bid on all such line
		items shall result in a non-responsive bid, requiring rejection thereof. In event that
		a bidder is willing to waive costs associated with an individual line item, he is required
		to insert descriptive words or abbreviations such as "no charge" or "N.C."
		NOTE 2: Prospective bidders are encouraged to examine the vessel prior to bid opening.
		The date for examining the vessel is scheduled by appointment. All arrangements shall be made
		with Mr. Victor M. Garcia, (504) 862-2366 prior to the scheduled date. Failure to examine the vessel
		before submitting a bid will not be considered cause for claim against the Government.
		NOTE 3: All requirements in the schedule under the ITEM and Description/Specs./Work Statement."
		The citation "0001 DD-1" gives the necessary information for proper bid preparation for
		Contract Line Item 0001.
		EXAMPLE
		ITEM Spec. DESCRIPTION
		0001 DD-1 Berthage, Drydocking and Services
		NOTE 4: Payments for items identified as (Optional) will be paid in accordance
		with the provisions located in SECTION H, at paragraph H-2, "Optional Item."
		Payment shall be calculated by multiplying the bid Optional (U/P) by
		the actual Quantity (Qty.) used - (U/P x QTY).
		NOTE 5: The use of any particular product or commodity name is only given as a point of
		reference and any product or commodity that will satisfy solicitation or contract
		performance requirements may be offered. It is further requested that offeror submit
		manufacturer's specifications or information sheets delineating those like characteristics.
		NOTE 6: See solicitation Clause 52.228-16 "Performance and Payment Bonds -
		Other than Construction" in Section I.
		NOTE 7: Contractors must be registered in SAM.gov to receive a contract award.
		NOTE 8: Bidders are required to contact the USACE Contract Specialist to request the applicable DOL Wage Determination for their parish/county.
			Requests shall be sent via email to Lauren Gandolfi at lauren.a.gandolfi@usace.army.mil. The current applicable DOL Wage Determination
			will be incorporated into any resulting contract. Failure to request the applicable DOL Wage Determination from USACE before submission
			of a bid will render the bid non-responsive and the bid will be rejected.***
Item	Spec.		Description	Qty.	U/I	Unit Price	Amount
0001	DD-1		Berthage, Drydocking, and Services	1	jb
0002	DD-2		Sea Chests and Gratings	1	jb
0003	DD-3		Sea Chests Strainers	1	jb
0004	DD-4		Sea Valves	1	jb
0005	DD-5		Anchors and Anchor Chains	1	jb
	DD-6		NOT USED
0006	DD-7		Hopper Doors	1	jb
0007	DD-7.1		Hopper Door Top Insert Plates Renew	10	ea
0008	DD-7.2		(Optional) Hopper Door Side Plates Renew	10	ea
0009	DD-7.3		(Optional) Hopper Door Fwd & Aft Plates Renew	6	ea
0010	DD-7.4		Hopper Door (3/4") Hinge Plate Bushings	30	ea
0011	DD-7.5		Hopper Door (1-3/4") Hinge Plate Bushings	30	ea
0012	DD-7.6		Hopper Door (3/4") Hinge Plate Replacement	20	ea
0013	DD-7.7		(Optional) Bearing Pot Replacement	10	ea
0014	DD-7.8		Bearing Pot Bushings	40	ea
0015	DD-7.9		Hopper Door Pad Eye Bushing	14	ea
0016	DD-7.10		Top Bushings on Lower Push-Pull Rods w/Eye	14	ea
0017	DD-7.11		Top Bushings on Lower Push-Pull Rods w/Fork	28	ea
0018	DD-7.12		(Optional) Bottom Pipe Bushings on Push-Pull Rods	28	ea
0019	DD-7.13		Replacement of Hopper Door Seals	1	jb
0020	DD-7.14		(Optional) Hopper Door Upper Rod Lower Guide Support Repl.	20	ea
0021	DD-7.15		Hopper Door Upper Rod Lower Guide Block Repair	28	ea
0022	DD-7.16		(Optional) Hopper Door Upper Rod Upper Guide Block Repair	20	ea
0023	DD-7.17		(Optional) Hopper Door Upper Rod New Sleeve Installation at Lower Guide	7	ea
0024	DD-7.18		Hopper Door Upper Rod Replacement (Main Stem)	1	jb
0025	DD-8		Zinc Anodes	1	jb
0026	HH-1		Hopper Bay Inspection	1	jb
0027	HH-2.1.1		Hopper Bay Plating, Athwartship, Plate A	7	ea
0028	HH-2.1.2		(Optional) Hopper Bay Plating, Athwartship, Plate B	7	ea
0029	HH-2.1.3		(Optional) Hopper Bay Plating, Athwartship, Plate C	7	ea
0030	HH-2.1.4		Hopper Bay Plating, Athwartship, Plate D	7	ea
0031	HH-2.2.1		Hopper Bay Plating, Longitudinal, Plate A	6	ea
0032	HH-2.2.2		(Optional) Hopper Bay Plating, Longitudinal, Plate B	7	ea
0033	HH-2.3		Longitudinal Reinforced Plate in Voids	6	ea
0034	HH-3		Hopper Bay Sloped Plate Weld Seam Repair	20	ea
0035	HH-4		Wing Voids Interior Weld Seam Repair	20	ea
0036	HH-5		(Optional) Centerwell Bulkhead Weld Seam Repair	20	ea
0037	HH-6		(Optional) Hopper Weld Seam Repair (Various Locations)	20	ea
0038	HH-7.1		(Optional) Large Vertical T-Beam Section	2	ea
0039	HH-7.2		(Optional) Medium Vertical T-Beam Section	2	ea
0040	HH-7.3		(Optional) Small Vert. T-Beam Section (Above Stringer)	6	ea
0041	HH-7.4		(Optional) Small Vert. T-Beam Section (Below Stringer)	6	ea
0042	HH-7.5		(Optional) Stringer Plate Section	6	ea
0043	HH-8		(Optional) Ultrasonic Thickness Measurements	10,000	ea
0044	HH-9		Cover For Stacks	1	jb
0045	HH-10		Cleaning & Modifications of L.O. Settling Tank in AMR	1	jb
0046	HH-11		(Optional) Services of Machinist (outside)	2500	hr
0047	HH-12		(Optional) Machining	1000	hr
0048	HH-13.1		(Optional) Mild Steel Welding	1000	hr
0049	HH-13.2		(Optional) Low Hydrogen Welding	3500	hr
0050	HH-13.3		(Optional) Stainless Steel Welding	200	hr
0051	HH-13.4		(Optional) Inspection of Welds	500	hr
0052	HH-14		Ballast Tanks, Voids, and CofferDams	1	jb
0053	HH-15		Dirty Lube Oil, Oily Bilge & Sludge Tanks	1	jb
0054	HH-16		Fuel Oil Tanks	1	jb
0055	HH-17		Fuel Oil Vent Containments (Clean, Steel Repair)	1	jb
0056	HH-18		Protection, Cleaning, and Surface Preparation	1	jb
0057	HH-19		Painting	1	jb
0058	HH-20		Steel replacement & Painting #8 Port & Stbd Ballast Tanks and AMR	1	jb
0059	HH-21		Steel Repair And Painting #6 Port, Stbd & Center Ballast Tanks	1	jb
0060	MP-1.1		Propeller Hydraulic System Inspection	1	jb
0061	MP-1.2		Hydraulic Power Unit and Hub Oil System Maintenance (Port & Stbd)	1	jb
0062	MP-1.3		Port & Starboard Servo Box Inspection	1	jb
0063	MP-1.4		Port Tailshaft Replacement	1	jb
0064	MP-1.5		Port Propeller Hub & Blade Replacement	1	jb
0065	MP-1.6		Starboard Propeller Blade Replacement And Hub Inspection	1	jb
0066	MP-2.1		Port & Stbd Strut and Stern Tube Bearing Inspection	1	jb
0067	MP-2.2		Starboard Stern Tube Gland Seal Maintenance	1	jb
0068	MP-3.1		Bow Thruster System Inspection & Maintenance	1	jb
0069	MP-4.1		Rudder Stock & Pintle Pin Clearances (Port & Starboard)	1	jb
0070	MD-1.1		Sluice Valve Inspection	1	jb
0071	MD-1.2.1		(Optional) Sluice Valves, 18-Inch Diameter	5	ea
0072	MD-1.2.2		(Optional) Sluice Valves, 24-Inch Diameter	2	ea
0073	MD-1.2.3		(Optional) Sluice Valves, 26-Inch Diameter	2	ea
0074	MD-1.2.4		(Optional) Sluice Valves, 30-inch Diameter	3	ea
0075	MD-1.2.5		(Optional) Sluice Valves, 32-inch Diameter	2	ea
0076	MD-1.2.6		(Optional) Sluice Valves, 43-inch Diameter	1	ea
0077	MD-1.3		(Optional) Collection Valve Gate Repair	3	jb
0078	MD-1.4		Collection Valve Flushing Lines and Body Cleaning	1	jb
0079	MD-1.5		43 Inch Sluice Valve Body Replacement – Pump Room	1	jb
0080	MD-2.1		Clean Jetting Pipe & Reinstall Jetting Pumps & Motors & Replace Pipes	1	jb
0081	MD-3		(Optional) Weld Seam Repair on Collection Pipes in Voids (Port)	1	jb
0082	MD-4		(Optional) Port Overside Dragarm Trunnion (Hull Connection) Outboard Flange	1	jb
0083	MD-5		(Optional) Starboard Overside Trunnion Hull Flange	1	jb
0084	MD-6		Adjustable Weir & Cylinder Replacement	1	jb
0085	MA-1		Valve Replacement for Port & Stbd Plate Coolers	1	jb
0086	MA-2		Drain, Dispose, Refill, and Treat Fresh Water System (Port & Stbd)	1	jb
0087	MA-3		Clean Two Fresh Water Expansion Tanks	1	jb
0088	MA-4		Seawater Cooling Pump Rebuild (Pump Room) & Valve/Actuator Assemblies Replacement	1	jb
0089	MA-5		Tate Temco Valve Manifolds	1	jb
0090	MA-6		Potable Water System	1	jb
0091	MA-7		Ballast Tanks Suction And Discharge Pipes’ Replacement	1	jb
0092	MA-8		(Optional) Bilge & Ballast Pipes In Pump Room Replacement	1	jb
0093	MA-9		Marine Sanitation Device Maintenance & Holding Tank Cleaning	1	jb
0094	MA-10		Replacement Of Emergency Generator	1	jb
0095	MA-11		Crane Engine & Components Overhaul & Cleaning	1	jb
0096	MA-12		(Optional) Air Handler in Poop Deck	1	jb
0097	MA-13		(Optional) Replacement of Deck Plate in Fan Room (Bridge Deck - Stbd Side)	1	jb
0098	MA-14		(Optional) Pressure Wash, Blast & Paint Pump Room	1	jb
0099	MA-15		Insulation Replacement Throughout AMR Rooms	1	jb
0100	MA-16		(Optional) Convert #7 Center Ballast Tank to Slops Tank	1	jb
0101	MA-17		Hydraulics Maintenance	1	jb
0102	MA-18		Cleaning of Main & Dredge Engine Stacks	1	jb
0103	MA-19		Heat Exchanger Replacement For Ac-Chilled Water#2	1	jb
0104	MA-20		(Optional) Replacement of Port & Stbd Services Frames	1	jb
0105	EE-1		Dredge Wheeler Ship Service And Emergency Switchboard Maintenance	1	jb
0106	EE-2		Dredge Wheeler Sea Water Pump Motor Variable Frequency Drives	1	jb
0107	EE-3		Dredge Wheeler Steering Gear & Gyro Installation	1	jb
0108	EE-4		Protection of Hydraulic Control Panels	1	jb
0109	EE-5		(Optional) Fan Repairs	1	jb
0110			Dock Trials	1	jb
0111			Growth Rate* (This bid schedule includes an estimated quantity for evaluation purposes only. Actual hours may be lower or higher.)	10,000	hr
0112			Percent Mark Up (This mark up applies to materials, parts and subcontract service in growth work only. This percentage will be evaluated for reasonableness.)	___	%
0113	PR-1		Dredge Pipes Weld Repair & Replacement (Pump Room & No. 2 Port & Stbd Voids)	1	jb	____________
			The labor hourly rate in CLIN 0111 "Growth Rate" shall be used in pricing all
			contract changes in accordance with the clause of
			Section H-2A entitled "COMPOSITE LABOR HOUR RATE FOR
			CONTRACT CHANGES."
						Total:
			END OF SECTION B
						Base
						Optional

&C&"Courier New,Regular"&12B-&P

Sheet2

File details come from the government source that posted it. Updated Nov 14, 2017.