Misc_Drawings_Part7.pdf

Product Information Packet: CEM3581T - 1HP,1760RPM,3PH,60HZ,143TC,0519M,TEFC,F1 Hydraulic Power Unit - Item #04 - CEM3581THydraulic Power Unit - Item #04 - CEM3581T

8-248-24

HPU Item #05Hydraulic Power Unit - Item #05 - 2GG1U11RHydraulic Power Unit - Item #05 - 2GG1U11R

8-258-25

8-268-26

8-278-27

8-288-28

8-298-29

NEMA Frame Motors

44 magnaloy coupling company 501 Commerce Drive Alpena, MI 49707 989 356-2186 A Division of Douville Johnston Corporation Fax: 989 354-4190 http://www.magnaloy.com

TABLE 6 - NEMA ‘C’ Face Motor Dimensions

182UC

184UC

213UC

215UC

254UC

256UC

284UC

286UC

324USC

326USC

324UC

326UC

364USC

365USC

364UC

365UC

404USC

405USC

404UC

405UC

444USC

445USC

444UC

445UC

AH 2.125 2.75 3.50 4.625 3.00 5.375 3.50 6.125 4.00 6.875 4.00 8.375

U 7/8 1 1/8 1 3/8 1 5/8 1 5/8 1 7/8 1 7/8 2 1/8 2 1/8 2 3/8 2 1/8 2 7/8 S 3/16 1/4 5/16 3/8 3/8 1/2 1/2 1/2 1/2 5/8 1/2 3/4

AK 4.50 8.50 8.50 10.50 12.50 12.50 12.50 12.50 12.50 12.50 16.00 16.00

AJ 5.875 7.25 7.25 9.00 11.00 11.00 11.00 11.00 11.00 11.00 14.00 14.00

BF 3/8-16 1/2-13 1/2-13 1/2-13 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

HP* 1

7.5

056C

143TC

145TC

182TC

184TC

213TC

215TC

254TC

256TC

284TSC

286TSC

284TC

286TC

324TSC

326TSC

324TC

326TC

364TSC

365TSC

364TC

365TC

404TSC

405TSC

404TC

405TC

444TSC

449TSC

444TC

449TC

AH 2.062 2.125 2.625 3.125 3.75 3.00 4.375 3.50 5.00 3.50 5.625 4.00 7.00 4.50 8.25 U 5/8 7/8 1 1/8 1 3/8 1 5/8 1 5/8 1 7/8 1 7/8 2 1/8 1 7/8 2 3/8 2 1/8 2 7/8 2 3/8 3 3/8 S 3/16 3/16 1/4 5/16 3/8 3/8 1/2 1/2 1/2 1/2 5/8 1/2 3/4 5/8 7/8 AK 4.50 4.50 8.50 8.50 8.50 10.50 10.50 12.50 12.50 12.50 12.50 12.50 12.50 16.00 16.00 AJ 5.875 5.875 7.25 7.25 7.25 9.00 9.00 11.00 11.00 11.00 11.00 11.00 11.00 14.00 14.00 BF 3/8-16 3/8-16 1/2-13 1/2-13 1/2-13 1/2-13 1/2-13 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11 5/8-11

HP* 1/4

1/2

7.5

U-Frame Dimensions

T-Frame Dimensions

* Horse Power at 1750 RPM

Magnaloy Cast Aluminum Mounts

Magnaloy Horizontal Pump/Motor Mounts

MAGNALOY CAST ALUMINUM MOUNTS are permanent mold cast of lightweight, high strength aluminum alloy and incorporate many unique design features. Custom molded OSHA orange coupling access covers are included for mounts larger than motor group size 056. These covers are quickly and securely retained via a lip-tab on one end and a single self-tapping screw on the other. Magnaloy’s horizontal mounts are supplied with a pre-cast drain hole for residual fluids. This unique feature assists in quick detection of leaky seals and other trouble areas.

Using Magnaloy’s Pump/Motor Mounts ensure a lightweight, high strength, precision mount for efficient assembly, quiet operation, accurate shaft alignment and complete coupling concealment.

MAGNALOY’S HORIZONTAL PUMP/MOTOR MOUNTS are available for mounting NEMA C’Face motors in frame sizes 56C through 449TSC to most SAE and Metric 2 and 4 bolt pump flanges.

A MOUNT KIT is included which contains all the bolts and washers required to attach the pump and motor to the mount.

HPU Item #06.1Hydraulic Power Unit - Item #06.1 - M056422AHydraulic Power Unit - Item #06.1 - M056422A

8-308-30

Horizontal Pump/Motor Mounts

55magnaloy coupling company 501 Commerce Drive Alpena, MI 49707 989 356-2186 A Division of Douville Johnston Corporation Fax: 989 354-4190 http://www.magnaloy.com

Horizontal Mount Selection Method

1. Check TABLES 2 thru 5 to determine pump flange size.

2. Measure the pump shaft length from the shaft end to the flange mounting face and ADD to the motor shaft length shown in TABLE 6. An additional 1/16 inch (minimum) is recommended for shaft end clearance.

3. Refer to the appropriate TABLE (7 thru 11) according to the NEMA motor frame size and locate the applicable pump flange selection form STEP 1, above.

4. Select the mount length option (dimension ‘XM’ or ‘M’ in tables) based on the minimum length determined in STEP 2, above.

5. Check for proper clearance between the mount inner surfaces and the coupling O.D. (dimension ‘Z’ and ‘CL’ in tables).

Dimensional data for Magnaloy Couplings is shown in TABLE 1 for reference. A complete Magnaloy Coupling catalog is available upon request or visit www.magnaloy.com.

Consult your Magnaloy Distributor for Magnaloy’s Product CD ROM which includes the Magnaloy Pump/Motor Mount

Selection Program for easy, computerized mount selection.

TABLE 7 - NEMA Frames 56C, 143TC/145TC, 182UC/184UC Horizontal Mounting (or Vertical Mounting - Option A)

USA4F17 4 Bolt 1.782 2.84 5/16-18 M056354F 2.81 3.50 M056424F 3.56 4.25 M056454F 3.81 4.50

SAE AA 2 Bolt 2.001 3.25 3/8-16 M056352AA 2.81 3.50 M056422AA 3.56 4.25 M056452AA 3.81 4.50

SAE A 2(4) Bolt 3.251 4.19 3/8-16 4.12 3/8-16 M056352A 2.81 3.50 M056422A 3.56 4.25 M056452A 3.81 4.50

80 2A/B4 2(4) Bolt 80.01mm 109mm 3/8-16 103mm 5/16-18 M0563580M 2.81 3.50 M0564280M 3.56 4.25 M0564580M 3.81 4.50

80 S4 4 Bolt 80.01mm 100mm 5/16-18 M0563580MS 2.81 3.50 M0564280MS 3.56 4.25 M0564580MS 3.81 4.50

USA4F17 4 Bolt 1.782 2.84 5/16-18 M056504F 4.31 5.00 M056524F 4.56 5.25

SAE AA 2 Bolt 2.001 3.25 3/8-16 M056502AA 4.31 5.00 M056522AA 4.56 5.25

SAE A 2(4) Bolt 3.251 4.19 3/8-16 4.12 3/8-16 M056502A 4.31 5.00 M056522A 4.56 5.25

SAE B 2(4) Bolt 4.001 5.75 1/2-13 5.00 1/2-13 M056502B* 3.93 5.00 M056522B* 4.18 5.25

80 2A/B4 2(4) Bolt 80.01mm 109mm 3/8-16 103mm 5/16-18 M0565080M 4.31 5.00 M0565280M 4.56 5.25

80 S4 4 Bolt 80.01mm 100mm 5/16-18 M0565080MS 4.31 5.00 M0565280MS 4.56 5.25

80 S4 4 Bolt 80.01mm 100mm 5/16-18 M05650100M* 3.93 5.00M05652100M* 4.18 5.25

5.8

5.8

7/

7/

6.8

6.8

4.5

4.5

MOTOR END DATA

AJ BF BD AK

MOTOR END DATA

AJ BF BD AK

PUMP FLANGE PUMP END DATA 3.50 LENGTH 4.25 LENGTH 4.50 LENGTH

PUMP FLANGE PUMP END DATA 5.00 LENGTH 5.25 LENGTH

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL XM MOUNT NO. CL XM MOUNT NO. CL XM

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL XM MOUNT NO. CL XM

RADIAL CLEARANCE “Z” = 4.15

RADIAL CLEARANCE “Z” = 4.15

* RADIAL CLEARANCE “Z” = 4.10

HPU Item #06.1Hydraulic Power Unit - Item #06.1 - M056422AHydraulic Power Unit - Item #06.1 - M056422A

8-318-31

66 magnaloy coupling company 501 Commerce Drive Alpena, MI 49707 989 356-2186 A Division of Douville Johnston Corporation Fax: 989 354-4190 http://www.magnaloy.com

TABLE 8A - NEMA Frames 182TC - 256TC, 213UC - 256UC

TABLE 8B - NEMA Frames 182TC - 256TC, 213UC - 256UC

Horizontal Mounting (or Vertical Mounting - Option A)

Horizontal Mounting

MOTOR END DATA

AJ BF BD AK

MOTOR END DATA

AJ BF BD AK

MOTOR END DATA

AJ BF BD AK

7.2

7.2 /3 9.0

8.5

7.2

/3

/3

9.0

8.5

9.0

8.5

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M MOUNT NO. CL M MOUNT NO. CL M

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M MOUNT NO. CL M MOUNT NO. CL M

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M MOUNT NO. CL M

USA4F17 4 Bolt 1.782 2.84 5/16-18 M182474F 4.00 4.75 M182504F 4.31 5.00 M182524F 4.31 5.25

SAE AA 2 Bolt 2.001 3.25 3/8-16 M182472AA 4.00 4.75 M182502AA 4.31 5.00 M182522AA 4.31 5.25

SAE A 2(4) Bolt 3.251 4.19 3/8-16 4.12 3/8-16 M182472A 4.00 4.75 M182502A 4.31 5.00 M182522A 4.31 5.25

80 2A/B4 2(4) Bolt 80.01mm 109mm 3/8-16 103mm 5/16-18 M1824780M 4.00 4.75 M1825080M 4.31 5.00 M1825280M 4.31 5.25

80 S4 4 Bolt 80.01mm 100mm 5/16-18 M1824780MS 4.00 4.75 M1825080MS 4.31 5.00 M1825280MS 4.31 5.25

SAE B 2(4) Bolt 4.001 5.75 1/2-13 5.00 1/2-13 M182522B 4.50 5.25 M182582B 5.06 5.81 M182602B 5.25 6.00

SAE C 2(4) Bolt 5.001 7.12 5/8-11 6.38 1/2-13 M182522C 4.50 5.25 M182582C 5.06 5.81 M182602C 5.25 6.00

100 A2/B4 2(4) Bolt 100.01mm 140mm 1/2-13 125mm 3/8-16 M18252100M 4.50 5.25 M18258100M 5.06 5.81 M18260100M 5.25 6.00

125 A2/B4 2(4) Bolt 125.01mm 180mm 5/8-11 160mm 1/2-13 M18252125M 4.50 5.25 M18258125M 5.06 5.81 M18260125M 5.25 6.00

RADIAL CLEARANCE “Z” = 5.00

USA4F17 4 Bolt 1.782 2.84 5/16-18 M182584F 5.06 5.81 M182684F 6.06 6.81

SAE AA 2 Bolt 2.001 3.25 3/8-16 M182582AA 5.06 5.81 M182682AA 6.06 6.81

SAE A 2(4) Bolt 3.251 4.19 3/8-16 4.12 3/8-16 M182582A 5.06 5.81 M182682A 6.06 6.81

80 2A/B4 2(4) Bolt 80.01mm 109mm 3/8-16 103mm 5/16-18 M1825880M 5.06 5.81 M1826880M 6.06 6.81

80 S4 4 Bolt 80.01mm 100mm 5/16-18 M1825880MS 5.06 5.81 M1826880MS 6.06 6.81

RADIAL CLEARANCE “Z” = 5.00

RADIAL CLEARANCE “Z” = 5.00

PUMP FLANGE PUMP END DATA 4.75 LENGTH 5.0 LENGTH 5.25 LENGTH

PUMP FLANGE PUMP END DATA 5.25 LENGTH 5.81 LENGTH 6.00 LENGTH

PUMP FLANGE PUMP END DATA 5.81 LENGTH 6.81 LENGTH

182-A Casting

182-B Casting

HPU Item #06.1Hydraulic Power Unit - Item #06.1 - M056422AHydraulic Power Unit - Item #06.1 - M056422A

8-328-32

77magnaloy coupling company 501 Commerce Drive Alpena, MI 49707 989 356-2186 A Division of Douville Johnston Corporation Fax: 989 354-4190 http://www.magnaloy.com

MOTOR END DATA

AJ BF BD AK

7.2

9.0

.00

.00 /3 .00

.00

/3 .00

.50

/3

/3 .00

.50

9.0 8.5

RADIAL CLEARANCE “Z” = 5.00

RADIAL CLEARANCE “Z” = 6.40

RADIAL CLEARANCE “Z” = 7.74

RADIAL CLEARANCE “Z” = 10.75

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M MOUNT NO. CL M

PUMP FLANGE PUMP END DATA 6.88 LENGTH 7.50 LENGTH 8.69 LENGTH

SAE B 2(4) Bolt 4.001 5.75 1/2-13 5.00 1/2-13 M182682B 6.06 6.81 M182702B 6.25 7.00

SAE C 2(4) Bolt 5.001 7.12 5/8-11 6.38 1/2-13 M182682C 6.06 6.81 M182702C 6.25 7.00

100 A2/B4 2(4) Bolt 100.01mm 140mm 1/2-13 125mm 3/8-16 M18268100M 6.06 6.81 M18270100M 6.25 7.00

125 A2/B4 2(4) Bolt 125.01mm 180mm 5/8-11 160mm 1/2-13 M18268125M 6.06 6.81 M18270125M 6.25 7.00

PUMP FLANGE PUMP END DATA 6.81 LENGTH 7.00 LENGTH

PUMP FLANGE PUMP END DATA 7.62 LENGTH 8.75 LENGTH

PUMP FLANGE PUMP END DATA 8.88 LENGTH

TABLE 9 - NEMA Frames 284TC/TSC - 286TC/TSC, 284UC/286UC

TABLE 10 - NEMA Frames 324TC/TSC - 405TC/TSC, 324UC/USC - 405UC/USC

TABLE 11 - NEMA Frames 444TC/TSC - 449TC/TSC, 444UC/USC - 445UC/USC

MOTOR END DATA

AJ BF BD AK

MOTOR END DATA

AJ BF BD AK

MOTOR END DATA

AJ BF BD AK

SAE A 2(4) Bolt 3.251 4.19 3/8-16 4.12 3/8-63 M284682A 6.00 6.88 M284752A 6.62 7.50 M284862A 7.81 8.69

SAE B 2(4) Bolt 4.001 5.75 1/2-13 5.00 1/2-13 M284682B 6.00 6.88 M284752B 6.62 7.50 M284862B 7.81 8.69

SAE C 2(4) Bolt 5.001 7.12 5/8-11 6.38 1/2-13 M284682C 6.00 6.88 M284752C 6.62 7.50 M284862C 7.81 8.69

80 A2/B4 2(4) Bolt 80.01mm 109mm 3/8-16 103mm 5/16-18 M2846880M 6.00 6.88 M2847580M 6.62 7.50 M2848680M 7.81 8.69

80 S4 4 Bolt 80.01mm 100mm 5/16-18 M2846880MS 6.00 6.88 M2847580MS 6.62 7.50 M2848680MS 7.81 8.69

100 A2/B4 2(4) Bolt 100.01mm 140mm 1/2-13 125mm 3/8-16 M28468100M 6.00 6.88 M28475100M 6.62 7.50 M28486100M 7.81 8.69

125 A2/B4 2(4) Bolt 125.01mm 180mm 5/8-11 160mm 1/2-13 M28468125M 6.00 6.88 M28475125M 6.62 7.50 M28486125M 7.81 8.69

SAE B 2(4) Bolt 4.001 5.75 1/2-13 5.00 1/2-13 M324762B 6.75 7.62 M324872B 7.88 8.75

SAE C 2(4) Bolt 5.001 7.12 5/8-11 6.38 1/2-13 M324762C 6.75 7.62 M324872C 7.88 8.75

SAE D 2(4) Bolt 6.001 9.00 3/4-10 9.00 3/4-10 M324762D 6.75 7.62 M324872D 7.88 8.75

100 A2/B4 2(4) Bolt 100.01mm 140mm 1/2-13 125mm 3/8-16 M32476100M 6.75 7.62 M32487100M 7.88 8.75

125 A2/B4 2(4) Bolt 125.01mm 180mm 5/8-11 160mm 1/2-13 M32476125M 6.75 7.62 M32487125M 7.88 8.75

160 A2/B4 2(4) Bolt 160.01mm 224mm 3/4-10 200mm 5/8-11 M32476160M 6.75 7.62 M32487160M 7.88 8.75

180 B4 4 Bolt 180.01mm 224mm 5/8-11 M32476180M 6.75 7.62 M32487180M 7.88 8.75

SAE C 2(4) Bolt 5.001 7.12 5/8-11 6.38 1/2-13 M444882C 7.12 8.88

SAE D 2(4) Bolt 6.001 9.00 3/4-10 9.00 3/4-10 M444882D 7.12 8.88

SAE E 2 Bolt 6.501 12.50 1-8 M444882E 7.12 8.88

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M MOUNT NO. CL M MOUNT NO. CL M

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M MOUNT NO. CL M

XAK XAJ2 XBF2 XAJ4 XBF4 MOUNT NO. CL M

HPU Item #06.1Hydraulic Power Unit - Item #06.1 - M056422AHydraulic Power Unit - Item #06.1 - M056422A

8-338-33

Hydraulic Products

Industrial Supplies and Expertise

Material: Magnesium Titanium

Coupling Size

Bore X Key

(in) Order No. Mfr. No. Net Price

3/8 X 3/32 MA4400016 M10001203 $14.44

7/16 X 3/32 MA4400017 M10001403 14.44

7/16 X 1/8 MA4400018 M10001404 14.44

1/2 X 1/8 MA4400019 M10001604 14.44

9/16 X 1/8 MA4400021 M10001804 14.44

5/8 X 5/32 MA9781550 M10002005 14.44

5/8 X 3/16 MA9621528 M10002006 14.44

11/16 X 3/16 MA4400025 M10002206 14.44

3/4 X 1/8 MA4400026 M10002404 14.44

3/4 X 3/16 MA2540314 M10002406 14.44

7/8 X 3/16 MA2571277 M10002806 14.44

7/8 X 1/4 MA4400029 M10002808 14.44

1 X 3/16 MA4400030 M10010006 14.44

1 X 1/4 MA1610992 M10010008 14.44

1 1/8 X 1/4 MA8209497 M10010408 14.44

1/2 X 1/8 MA2518115 M20001604 16.97

9/16 X 1/8 MA4400045 M20001804 16.97

5/8 X 5/32 MA5386637 M20002005 16.97

5/8 X 3/16 MA1184805 M20002006 16.97

11/16 X 3/16 MA4400048 M20002206 16.97

3/4 X 1/8 MA1193033 M20002404 16.97

3/4 X 3/16 MA5190003 M20002406 16.97

7/8 X 3/16 MA7167691 M20002806 16.97

7/8 X 1/4 MA5542560 M20002808 16.97

1 X 3/16 MA1917328 M20010006 16.97

1 X 1/4 MA7490210 M20010008 16.97

1 1/8 X 1/4 MA2518117 M20010408 16.97

1 1/4 X 1/4 MA5240084 M20010808 16.97

1 1/4 X 5/16 MA4400059 M20010810 16.97

1 3/8 X 5/16 MA2511102 M20011210 16.97

Flexible Coupling Round Bore Hub

Accumulator Discharge Valve The ADV1-16 is a poppet-type, normally open, externally piloted, screw-in, cartridge-type accumulator discharge valve. In its unpiloted position, this valve remains open between port 1 and port 2 until suffi cient pilot pressure is applied to port 3. Flow is then blocked from port 1 to port 2. Port 2 is connected to tank.

Order No. Mfr. No. Model No.

Port Size Approximate Dimensions Net Price

MA3324664 02-162712 ADV1-16-12H-100-00 SAE-12 5 in x 2.5 in x 5 in $148.51

Max. Pressure: 3,000 psi Max. Flow: 8 gpm Min. Pilot Pressure: 60 psi Cavity: C-16-3S Housing Material: Aluminum Filtration: Code 18/16/13 Pilot Ratio: 100:1

Flexible Coupling Insert

Flexible Drive Couplings

Select coupler size and insert by your needed horsepower and RPM requirements, then select shaft diameter and keyway size needed from the table below. Order insert and coupling halves separately.

Magnaloy is the original lightweight, heavy-duty, fl exible drive coupling. Lightweight magnesium construction makes Magnaloy couplings 76% lighter than cast iron and 36% lighter than aluminum units.

Material Color Temperature

Range Neoprene Black -30 °F to 250 °F Urethane Yellow -30 °F to 150 °F

Hytrel Blue-green -65 °F to 300 °F

Coupling Size

Max. Bore Size (in) Order No. Material

Torque Rating (in lb)

HP @

100 rpm

HP @

1200 rpm

HP @

1800 rpm Net Price

100 1 1 / 8 MA9839367 Neoprene 340.7 0.55 6.50 9.80 $4.49 MA3531180a Urethane 511.0 0.82 9.80 14.70 7.04 MA6913664 Hytrel 1,022.1 1.65 19.80 29.70 7.73

200 1 3 / 8 MA9628895 Neoprene 398.3 0.64 7.60 11.50 5.91 MA2286778a Urethane 597.4 0.96 11.50 17.20 8.98 MA2541444 Hytrel 1,194.9 1.92 23.00 34.50 9.51

300 1 5 / 8 MA7200509 Neoprene 701.4 1.12 13.50 20.20 7.41 MA0538019a Urethane 1,052.1 1.68 20.20 30.30 10.63 MA7600551 Hytrel 2,104.2 3.36 40.40 60.60 11.65

400 1 7 / 8 MA9600139 Neoprene 1,056.3 1.69 20.30 30.40 8.93 MA9853544a Urethane 1,584.5 2.50 30.40 45.60 14.31 MA5760615 Hytrel 3,168.9 5.10 60.80 91.30 15.77

500 2 3 / 8 MA1550024 Neoprene 2,194.8 3.50 42.10 63.20 10.54 MA6170194a Urethane 3,292.2 5.30 63.20 94.80 22.68 MA9370802 Hytrel 6,584.4 10.50 126.40 189.60 19.95 a Urethane tends to soften in higher temperatures and humid conditions.

Coupling Size

Bore X Key

(in) Order No. Mfr. No. Net Price

5/8 X 5/32 MA4400425 M30002005 $22.68

3/4 X 3/16 MA2114061 M30002406 22.68

7/8 X 3/16 MA9902151 M30002806 22.68

7/8 X 1/4 MA3863857 M30002808 22.68

1 X 3/16 MA4440078 M30010006 22.68

1 X 1/4 MA7920726 M30010008 22.68

1 1/8 X 1/4 MA9909597 M30010408 22.68

1 3/16 X 1/4 MA4400082 M30010608 22.68

1 1/4 X 1/4 MA1330473 M30010808 22.68

1 1/4 X 5/16 MA7689860 M30010810 22.68

1 3/8 X 5/16 MA4401061 M30011210 22.68

1 3/8 X 3/8 MA1174520 M30011212 22.68

1 7/16 X 3/8 MA1069358 M30011412 22.68

1 1/2 X 3/8 MA0551655 M30011612 22.68

1 5/8 X 3/8 MA3863860 M30012012 22.68

3/4 X 3/16 MA2552157 M40002406 31.26

7/8 X 3/16 MA3050547 M40002806 31.26

1 X 3/16 MA1077060 M40010006 31.26

1 X 1/4 MA9463721 M40010008 31.26

1 1/8 X 1/4 MA6415600 M40010408 31.26

1 1/4 X 1/4 MA5664071 M40010808 31.26

1 1/4 X 5/16 MA9760278 M40010810 31.26

1 3/8 X 5/16 MA2110355 M40011210 31.26

1 7/16 X 3/8 MA1876639 M40011412 31.26

1 1/2 X 5/16 MA4400110 M40011610 31.26

1 1/2 X 3/8 MA0210695 M40011612 31.26

1 5/8 X 3/8 MA0235791 M40012012 31.26

1 3/4 X 3/8 MA1318568 M40012412 31.26

1 3/4 X 7/16 MA0216708 M40012414 31.26

1 7/8 X 1/2 MA9463719 M40012816 31.26

1 3/4 X 7/16 MA9909217 M50012414 43.55

1 7/8 X 1/2 MA2531057 M50012816 43.55

1 15/16 X 1/2 MA4400139 M50013016 43.55

2 X 1/2 MA3239891 M50020016 43.55

2 1/8 X 1/2 MA6478314 M50020416 43.55

2 1/4 X 1/2 MA4400342 M50020816 43.55

2 3/8 X 5/8 MA9536453 M50021220 43.55

APC09_CH10_SEC3_FINAL_955-980.in977 977APC09_CH10_SEC3_FINAL_955-980.in977 977 3/26/2009 2:06:20 PM3/26/2009 2:06:20 PM

HPU Item #06.2-06.3 Hydraulic Power Unit - Item #06.2-06.3Hydraulic Power Unit - Item #06.2-06.3

8-348-34

Premium Flexible Drive Couplings magnaloy coupling company 501 Commerce Drive Alpena, MI 49707 989 356-2186 A Division of Douville Johnston Corporation Fax: 989 354-4190 http://www.magnaloy.com

Magnaloy is the original lightweight, heavy-duty flexible drive coupling. Light weight magnesium construction makes Magnaloy couplings 76% lighter than cast iron and 36% lighter than aluminum units... and they’re stronger than either!

The benefits are many... Reduced loads on bearings, shafts and pumps, for longer component life. Easier handling and installation. Rust proof and corrosion resistant.

Magnaloy’s close machining tolerances (TIR of .002”) assures vibration-free operation and easy, accurate alignment without need for special tools. Solid magnesium alloy permanent mold castings are heat treated and offer the highest strength-to-weight ratio available.

Coupling Model

Maximum Bore

Wr2 lb-ft2 Insert

Number

Rated Torque lb-in

Torsional Rigidity lb-in/Deg

Horse Power Rating @ rpm rpm rpm

100 1 1/8 0.0046 170N 170U 170H

340.7 511.0 1,022.1

0.55 0.82 1.65

6.5 9.8 19.8

9.8 14.7 29.7

200 1 3/8 0.0068 270N 270U 270H

398.3 597.4 1,194.9

0.64 0.96 1.92

7.6 11.5 23.0

11.5 17.2 34.5

300 1 5/8 0.022 370N 370U 370H

701.4 1,052.1 2,104.2

1.12 1.68 3.36

13.5 20.2 40.4

20.2 30.3 60.6

400 1 7/8 0.031 470N 470U 470H

1,056.3 1,584.5 3,168.9

1.69 2.50 5.10

20.3 30.4 60.8

30.4 45.6 91.3

500 2 3/8 0.071 570N 570U 570H

2,194.8 3,292.2 6,584.4

1,571

3.50 5.30 10.50

42.1 63.2 146.4

63.2 94.8 189.6

600 2 5/8 0.16 670N 670U 670H

4,946.7 7,420.1 14,840.1

1,510 2,960

7.90 11.90 23.70

94.9 142.5 284.9

142.5 213.7 427.4

700 2 7/8 0.34 770N 770U 770H

11,639.8 17,459.7 29,099.5

1,805 2,104 5,960

18.60 27.90 46.50

223.5 335.2 558.8

335.2 502.8 838.0

800 3 7/8 0.95 870N 870U 870H

21,889.4 32,834.1 47,062.2

3,680

11,950

35.00 52.50 75.20

420.3 630.4 903.0

630.4 945.6 1,354.5

900 4 3/4 4.20 970N 970U

47,842.3 71,763.5

8,428

76.50 114.80

918.6 1,377.9

1,377.9 2,066.8

Coupling Performance Specifications

HPU Item #06.4Hydraulic Power Unit - Item #06.4Hydraulic Power Unit - Item #06.4

8-358-35

HPU Item #08 Hydraulic Power Unit - Item #08 - CXJA-XANHydraulic Power Unit - Item #08 - CXJA-XAN

8-368-36

HPU Item #09 Hydraulic Power Unit - Item #09 - RPGC-LANHydraulic Power Unit - Item #09 - RPGC-LAN

8-378-37

50P Series High Pressure Filters

HPU Item #11 Hydraulic Power Unit - Item #11 - 50P110QM50XX1Hydraulic Power Unit - Item #11 - 50P110QM50XX1

8-428-42

Applications

Applications for 50P series fi lters

- Automotive specifi ed equipment

- Hydrostatic transmission circuits

- Servo and proportional controls

- Offshore drilling rigs

- Mining equipment

- Power units

The design objective for all Parker fi lters is to achieve a sensible balance between cost and performance.

We use state of the art techno1ogy to arrive at innovative yet practical designs. Designs which are cost effective for OEM’s and users alike.

The 50P series allows you to customize each fi lter to closely match your needs. Choose the options which best fi t your application. No need to waste money on features you don’t need.

The 50P series fi lters are base mounted, which provides several possible advan tages. The bowl up mounting makes servicing the elements quick and easy. Simply remove the top cover to access the element. A drain port is provided to allow oil be removed from fi lter prior to element servicing. This design reduces the possibility of oil spillage and injury to maintenance personnel.

The 50P series has optional manifold porting for space saving design that re duces the number of fi ttings and potential leak points. The porting is also designed to match the installation of many other manufacturers. Most important, the 50P series meets the SAE HF4 automotive standard.

Vent Plug

- Purge all air from fi lter assembly

- Improves system performance

Bowl

- Single or double lengthHead

- Ductile iron construction- SAE or manifold ports

- Meets SAE HF4 automotive specifi cation

Drain Plug (not visible)

- Drain oil for easy service

Indicators

- Visual or electrical/visual

- Several connector options

Cover

- Durable ductile iron

- Top service elements

- No oil spills during service

Bypass (not visible)

- Cartridge style

- Precision matched assemblies

HPU Item #11

8-438-43

Features

O-Ring Seal

- Positive sealing for optimum ele ment effi ciency

Plastic End Caps

- Excellent corrosion pro tection

- Laser marked for clear long lasting identifi cation

Microglass III Media

- Multi-layer for high capacity and high effi ciency

- Four different micron sizes available

- Wire reinforced to prevent pleat bunching

Spiral Support Cylinders (Not Visible)

- High strength consistent support

- Continuous length eliminates leak points and increases surface area

Meets SAE HF4 specifi caton for automotive uses

Feature Advantage Benefi t

• Base mounted fi lter • No brackets required for installation • Reduced installation costs

• Top access cover • Remove element from top • No oil mess

• Lighter then removing entire bowl

• Visual and electrical indicators • Know exactly when to service elements

• Drain port • Drain all oil from assembly prior • Eliminates cross contamination to servicing

• Vent port • Purges all trapped air in fi lter • Get the maximum performance from elements

• Prevents a “spongy” system

• Multipass tested elements • Element performance backed • Elements selected will have (per ANSI/NFPA T3.10.8.8 R1-1990) by recognized test standards consistent performance levels

• Microglass III elements • Multi-layer media • High capacity with high effi ciency

• Wire reinforced pleats • No performance loss from pleat bunching

HPU Item #11

8-448-44

50PR Reverse Flow Filter

The 50PR was designed specifi cally for hydrostatic transmission loops because of it’s capability to handle reverse fl ow.

Closed circuit HSTs frequently reverse direction causing fl ow to reverse in the fl uid lines. Pressure fi lters installed between pump and motor must be able to handle reverse fl ow without having contaminant washed off of the elements and back into the system.

To prevent such an occurrence, the fi lters require the use of internal check valves to direct the fl ow through the element in one direction and around the element in the other. Parker’s internal check valve design minimizes additional pressure loss and eliminates the cost associated with external valves and fi ttings. Also the inter nal design keeps the envelope dimensions of the fi lter to aminimum as can be seen on the installation drawing.

Sizing 50PR Filter Assemblies

To accurately determine the total pressure loss that will be seen when used in your system, the following steps should be taken.

1. Examine the “Flow vs. Pressure” curve below. Find the pressure drop for the maximum system fl ow on the forward fl ow curve. Record this value as “housing with check valve pressure loss.”

2. Examine the appropriate pressure loss curve for the media and bowl length combination. These curves are found in the Element Performance Data section.

3. Find the pressure drop for the maximum fl ow rate through the fi lter and record this value as “element pressure loss.”

4. Find the empty housing pressure drop for the maximum fl ow rate through the fi lter and record this value as “empty housing pressure loss.”

5. Add the values obtained in steps 1 and 3, then subtract out the value from step 4. The resultant pressure loss should not exceed 1/3 of the bypass valve or indicator you intend to select. If this ratio exceeds 1/3, then a double length housing or other media grade may need to be considered.

Contact the Hydraulic Filter Division if there is any doubt as to the total pressure loss you have calculated.

Bypass Valve

50PR Schematic

RFC

Typical FLow/Pressure Curves For 50 PR 1.75

1.5

1.25

0.75

0.5

0.25

(B

AR

D

IF

F.

P R

ES

S.

(P

SI

0 10 20 30 40 50 60 70 80 90 100

(GPM) FLOW (LPM)

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375

200 SUS200 SUS200 SUS

FORWARD FLOW (R

.F.C.V. O

NLY)

FORWARD FLOW (R

.F.C.V. O

NLY)

FORWARD FLOW (R

.F.C.V. O

NLY)

REVERSE FLOW (TOTAL)

REVERSE FLOW (TOTAL)

REVERSE FLOW (TOTAL)REVERSE FLOW CHECK VALVEREVERSE FLOW CHECK VALVEREVERSE FLOW CHECK VALVE

HPU Item #11

8-458-45

50P-1 Element Performance

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

2Q

10Q

20Q

2Q

10Q

20Q

5Q5Q

0 4 8 12 16 20

LPM

02Q

20Q10Q

PS

ID

GPM

1.5

1.0

0.5

0.0

B A

R

150SUS

05Q

0 50 100 150 200 250 300 350

0 20 40 60 80 100

LPM

PS

ID

GPM

1.5

1.0

0.5

0.0

B

AR

150SUS

Empty Housing

0 50 100 150 200 250 300 350

0 20 40 60 80 100

Flow vs. Pressure Loss

Capacity grams

PSID BAR

Capacity

5Q

2Q

20Q

10Q

0 20 40 60 80 100 120

Results typical from Multi-pass tests run per test standard ISO 16889 @ 50 gpm to 100 psid terminal - 10 mg/L BUGL

Refer to Appendix on pages 265-266 for relationship to test standard ISO 4572.

HPU Item #11

8-468-46

50P-2 Element Performance

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

2Q

10Q

20Q

2Q

10Q

20Q

5Q5Q

0 4 8 12 16 20

02Q

20Q

10Q

05Q

LPM

PS

ID

GPM

1.5

1.0

0.5

0.0

B

AR

150SUS

0 100 200 300 400 500

0 30 60 90 120 150

LPM

1.0

0.5

0.0

0 100 200 300 400 500

0 30 60 90 120 150

Capacity grams

PSID BAR

Capacity

20Q 10Q

2Q 5Q

0 50 100 150 200 250 300

Flow vs. Pressure Loss

Results typical from Multi-pass tests run per test standard ISO 16889 @ 80 gpm to 100 psid terminal - 10 mg/L BUGL

Refer to Appendix on pages 265-266 for relationship to test standard ISO 4572.

HPU Item #11

8-478-47

50P-3 Element Performance

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5

99.0 100

2 50.0

95.0

Micron Size (c)

0 4 8 12 16 20

2Q2Q2Q 5Q5Q5Q

20Q20Q20Q

10Q10Q10Q

LPM

02Q

20Q

10Q

1.0

0.5

0.0

B A

R

05Q

0 100 200 300 400 500

0 30 60 90 120 150

LPM

1.0

0.5

0.0

0 20 40 60 80 100

0 100 200 300 400 500

Empty Housing

Flow vs. Pressure Loss

Capacity grams

PSID BAR

Capacity

5Q

2Q

20Q

10Q

0 50 100 150 200 250 300 350 400

Results typical from Multi-pass tests run per test standard ISO 16889 @ 80 gpm to 100 psid terminal - 10 mg/L BUGL

Refer to Appendix on pages 265-266 for relationship to test standard ISO 4572.

HPU Item #11

8-488-48

Specifi cations

162.6 6.40

68.1

SAE-5 BLEED

PORT TORQUE

20-25 FT LBS.

TORQUE

45-50 FT LBS.

TORQUE

115-130 FT LBS.

OPTIONAL

FLANGE

OUTLET

158.8 6.25

161.8 6.37

“YY” “PP”

2.68

Pressure Ratings:

Maximum Allowable Operating Pressure (MAOP): 5000 psi (344.8 bar) Rated Fatigue Pressure: 3500 psi (241.4 bar) Design Safety Factor: 3:1

Element Collapse Rating:

150 psid (10.2 bar) standard 2000 psid (138 bar) high collapse “H” option

Operating Temperatures:

Buna: -40oF (-40oC) to 225oF (107oC) Fluorocarbon: -15oF (-26oC) to 275oF (135oC)

Filter Materials:

Head (base) and Cover: ductile iron Bowl: seamless steel tube

Indicators:

Visual 3 band (clean, change element, bypass) Electrical: visual as above plus electrical switch with wire leads or connection as selected.

5A @ 240VAC

3A @ 28VDC

SPDT

Color Coding:

White (normally closed) Red (normally open) Black (common)

Shipping Weights (approximate):

50P-1: 56 lb. (25.4 kg) 50P-2: 77 lb. (34.9 kg) 50P-3: 95 lbs. (43.0 kg) 50PR-1: 59 lb. (26.8 kg) 50PR-2: 80 lb. (36.3 kg)

7.9

127.0 5.00

34.9

42.8

1.95

57.2

114.3

98.0 3.86

4.50

14.3 .563

2.25

.0775

1.685

1.375

.31

50.8 2.00

63.5 2.50

Linear Measure: millimeter inch

34.8 1.37

92.2 3.63

12.7 .50

ELEMENT REMOVAL

CLEARANCE

Z

SAE-5

DRAIN PORT

OPTIONAL

RIGHT HAND

INDICATOR

1½” SAE-24 PORTS

OUTLET (2-128 O-RING)

INLET

(2-128 O-RING)

MOUNTING HOLES

DIA. THRU

DEEP

DIA. C BORE

X

22.4 .88

79.4 3.125

39.6 1.56

34.8 1.37

38.1 1.50

18.3 .72

36.5 1.437

12.7 .50

5/8”-11 UNC-2B

DIA. THRU

D

Drawings are for reference only.

Contact factory for current version.

387.1

15.24

404.6

15.93

622.8

24.52

640.3

25.21

254.0

10.00

254.0

10.00

508.0

20.00

508.0

20.00

X

Z

50P-1 50PR-1 50P-2 50PR-2 50P-3Dimensions= mm/inches

850.4

33.48

760.2

30.00

387.1 404.6 622.8 640.3

HPU Item #11

8-498-49

Parts List and Service Instructions

Element Service Instructions

When servicing the 50P fi lter, use the following procedure.

A. Stop the system’s power unit.

B. Relieve any pressure in the fi lter or line.

C. If desired, oil can be drained from fi lter housing by removing the drain port plug located in the head.

D. Rotate the cover counter clockwise and remove.

E. Remove element from housing.

F Place new, clean element into housing centering element over locator.

G. Inspect cover o-ring and replace if necessary

H. Apply cover to fi lter and tighten to 45-50 ft. lbs.

I. Replace drain plug and tighten 20-25 ft. lbs.

Parts List

Index Description Part Number 50P/PR

1 Head Assembly Consult Factory

2 Bowl Consult Factory

3 Cover 926655

4 Cover O-Ring

Buna N92246 Fluorocarbon V92246

5 Vent Plug 935466

Buna O-ring N93905 Fluorocarbon O-ring V93905

6 Element See model code page

7 Drain Plug 928364

Buna O-ring N93905 Fluorocarbon O-ring V93905

8 Bypass Valve

(50PR valve is not serviceable)

50 psi 924189

No bypass, 50 psi indicator 924192

90 psi 927399

No bypass, 90 psi indicator 930683

Indicator Kits

Mechanical (left side) 931916

Mechanical (right side) 931924

Electrical (wire leads) 925337

Electrical (3-pin Brad Harrison style) 926482

Electrical (DIN 43650 connection) 929362

O-Ring, Manifold Port

Buna N92128

Fluorocarbon V92128

Note: Consult factory for EPR compatible part numbers

HPU Item #11

8-508-50

How to Order

50P/50PR Replacement Elements (Fluorocarbon)

Standard Collapse High Collapse

Media Single Double Triple Media Single Double Triple

20Q 931018Q 931020Q 933489Q 20QH 930438Q 931490Q 936449Q

10Q 932670Q 932679Q 933488Q 10QH 932676Q 932685Q 936448Q

05Q 932669Q 932678Q 933487Q 05QH 932675Q 932684Q 936447Q

02Q 932668Q 932677Q 933486Q 02QH 932674Q 932683Q 936446Q

Please note the bolded options refl ect standard options with a reduced lead-time.

Consult factory on all other lead-time options.

BOX 6: Bypass and Indicator Setting

BOX 2: Basic Assembly

Symbol Description

50P 5000 PSI (MAOP)

50PR* Reverse fl ow hydrostatic version

BOX 3: Length

Symbol Description

1 Single

2 Double

3 Triple

Symbol Pressure Setting

35 35 psid 50 50 psid 90 90 psid

BOX 7: Ports

Symbol Description

PP SAE-24 straight thread

YY SAE 1½” fl ange face (J518) XX 13/8” manifold ports on bottom of head

BOX 8: Options

Symbol Description

1 None

11 Blocked bypass

BOX 1: Seals

Symbol Description

None Buna

F3 Fluorocarbon

E8 EPR

Symbol Description

P Port plugged

PL Port plugged, left side

M Visual indicator ML Visual indicator, left side E Electrical indicator with wire leads and conduit connection

EL Electrical indicator with wire leads and conduit connection, left side

D Electrical indicator w/ ANSI/B.93.55M 3-pin Brad Harrison style connection

DL Electrical indicator w/ ANSI/B.93.55M 3-pin Brad Harrison style connection, left side

BOX 5: Indicators

BOX 4: Element Media

Symbol Description

20Q Microglass III 10Q Microglass III 05Q Microglass III 02Q Microglass III Note: For high collapse 2000 psid rated elements, add “H” behind Q.

Note: Left side is on viewer’s left when looking into inlet port.

BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 BOX 6 BOX 7 BOX 8

*Note: Not available in triple length. Must select “1” or “2” in BOX 3

F3 50P 1 10Q DL 90 PP 1

HPU Item #11

8-518-51

Model: RSHC-LAN Capacity: 60 gpm (240 L/min.)

Pilot operated, balanced piston sequence valve

Pilot-operated, balanced piston sequence valves will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line.

Technical Data

U.S. Units Metric Units

Cavity T-17A

Capacity 60 gpm 240 L/min.

Control Pilot Flow 15 - 20 in³/min. 0,25 - 0,33 L/min.

Factory Pressure Settings Established at 4 gpm 15 L/min.

Maximum Operating Pressure 5000 psi 350 bar

Maximum Valve Leakage at 110 SUS (24 cSt) 4 in³/min.@1000 psi 65 cc/min.@70 bar

Response Time - Typical 10 ms

Series (from Cavity) Series 3

Adjustment - Number of Clockwise Turns to Increase Setting 5

Valve Hex Size 1 1/4 in. 31,8 mm

Valve Installation Torque 150 - 160 lbf ft 200 - 215 Nm

Adjustment Screw Internal Hex Size 5/32 in. 4 mm

Adjustment Locknut/Cap Hex Size 9/16 in. 15 mm

Adjustment Nut Torque 80 - 90 lbf in. 9 - 10 Nm

Model Weight 1.50 lb 0,70 kg

Seal Kits - Cartridge Buna: 990-017-007

Seal Kits - Cartridge Viton: 990-017-006

Control Adjustment Range Seal

Material

L Standard Screw Adjustment

A 100 - 3000 psi (7 - 210 bar), 1000 psi (70 bar) Standard Setting

N Buna-N http://www.sunhydraulics.com Date Created: 10/10/2011

Copyright © 2010-2011 Sun Hydraulics Corporation. All rights reserved.

HPU Item #12 Hydraulic Power Unit - Item #12 - RSJC-LBNHydraulic Power Unit - Item #12 - RSJC-LBN

8-528-52

Hydraulics K14

Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

K

Series TPC valves are pressure compensated and are insensitive to variations in oil temperature. They can maintain selected flow to within ±5% of setting over a pressure range from 100 to 3000 psi (7 to 210 Bar).

These valves are ideal for use on meter-in/meter-out or bleed-off circuits. Their insensitivity to oil temperature change allows flow to hold constant throughout wide fluctuations. Minimum pressure differential between inlet and outlet ports must be 100 psi (7 Bar) for Model TPC600, and 150 psi (10.5 Bar) for Model TPC1200.

Optional reverse-flow check valves are available on Models TPCC600 and TPCC1200; check-valve cracking pressure is 5 psi (0.4 Bar).

Optional lunge control to limit compensator piston travel is available on Model TPC600; this prepositions the compen-sator piston to minimize actuator lunge.

Maximum operating pressure, all models: 3000 psi (210 Bar).

Quick Reference Data Chart

Needle Flow Chart

Manatrol Series TPC Temperature and Pressure Compensated Flow Control Valves

Hydraulic Power Unit - Item #13 - TPCS600S3ALHydraulic Power Unit - Item #13 - TPCS600S3AL

8-538-53

Hydraulics K15

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

K

Dimensions Model TPC600S In-line mounted, pressure-compensated, temperature-insensitive flow control valve

8-548-54

Hydraulics K16

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

K

Dimensions Model TPC1200S28 In-line mounted, pressure-compensated, temperature-insensitive flow control valve.

8-558-55

Hydraulics K17

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

K

Dimensions Model TPCS600S Manifold-mounted, pressure-compensated, temperature-insensitive flow control valve.

8-568-56

Hydraulics K18

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

K

Dimensions Model TPCC600S In-line mounted, pressure-compensated, temperature-insensitive flow control valve with check.

8-578-57

Hydraulics K19

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

K

Dimensions Model TPCC1200S-28 In-line mounted, pressure-compensated, temperature-insensitive flow control valve.

8-588-58

Hydraulics K20

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

Sub Plate Dimensions

Reference Data Only (Subplates are not available)

K

Subplate Dimensions Use bolt kit BK-07 for mounting series TPCS600S valve on this subplate

8-598-59

Hydraulics K21

Hydraulic Valve Division Elyria, Ohio 44035 USA

Catalog HY14-3000/US repcat-k.p65, dd, fn

Manatrol Volume Control Valves Series TPC

Accessories

Bolt Kits

TPCS600

Bolt Kit Bolt specification Bolt torque

No. BK07 5/16" - 18 x 1" 19 ft. lb.

Omit Nitrile

V Fluorocarbon

K

Ordering Information How to order Series TPC Flow Control Valves Example: “TPCC600S02ALV” means Series TPC Valve, with reverse-flow check valve, in-line mounting size 3/8”, flow range of 5 to 50 CIPM, lunge control option, Fluorocarbon seals.

8-608-60

FLO

W

, N

EED

LE &

C

H

EC

K

VA

LVES

H

YD

R

A U

LIC

B

A

LL VA

LVES

W

ELD

C

O U

PLIN

G

S

FLA

N G

ES

Anchor Fluid Power • 5555 Fair Lane, Cincinnati, OH 45227 • (Offi ce)1-866-FLANGES (Fax) 513-527-4449 www.anchorfl uidpower.com • sales@anchorfl uidpower.com

LV2B Series / 1000 WOG Stainless Steel

• All stainless steel construction

• Locking handles standard

• Ideal for suction, pressure and return lines

• Available in NPT & SAE threads

• Mounting holes standard on SAE #16 - #32

• Mounting holes optional on all other valves up to 2”

FF

EEEE

DD

FRONT MOUNTING HOLESFRONT MOUNTING HOLES

ON 2" SIZE ONLYON 2" SIZE ONLY

SHOWN WITH OPTIONAL MOUNTING HOLESSHOWN WITH OPTIONAL MOUNTING HOLES

BB

GG

CC

AA

COMPONENT MATERIALS

COMPONENT MATERIAL

VALVE BODY ASTM A351

GR CF8M

TAILPIECE ASTM A351

GR CF8M

BALL ASTM A351

GR CF8M

STEM 316 1

BALL SEAT PTFE 2

STEM SEAT PTFE 1

STEM PACKING PTFE 1

STEM GLAND 304 1

HANDLE 304 1

STEM LOCK

WASHER

304 1

STEM NUT 304 1

HANDLE

SLEEVE

VINYL 1

LOCK 304 1

Model Code: LV2B N 1/2” -2T -MH

Thread type (N-NPT; S-SAE) Optional Mounting Holes Thread size (Ex. N1/2”; S#8)

LV2B SERIES - NPT

SIZE A B C D E F

UNC

G

1/4” .36 2.13 2.13 1.12 .49 10-24 4.33

3/8” .50 2.13 2.17 1.12 .49 10-24 4.33

1/2” .59 2.24 2.28 1.12 .49 10-24 4.53

3/4” .79 2.68 2.40 1.12 .49 10-24 4.53

1” .98 3.15 3.03 1.38 .91 1/4-20 5.04

1-1/4” 1.26 3.58 3.19 1.48 1.00 1/4-20 5.04

1-1/2” 1.50 4.06 3.54 1.48 1.00 1/4-20 6.10

2” 1.97 4.88 4.25 1.50 1.00 1/4-20 6.10

2-1/2” 2.56 6.30 5.20 N/A N/A N/A 9.06

3” 3.15 7.28 5.71 N/A N/A N/A 9.06

LV2B SERIES - SAE

SIZE A B C D E F

UNC

G

1/4” .35 2.40 2.13 1.12 .49 10-24 4.33

3/8” .47 2.40 2.17 1.12 .49 10-24 4.33

1/2” .59 2.52 2.28 1.12 .49 10-24 4.53

3/4” .79 3.23 2.40 1.12 .49 10-24 4.53

1” .98 3.62 3.03 1.38 .91 1/4-20 5.04

1-1/4” 1.26 3.96 3.19 1.48 1.00 1/4-20 5.04

1-1/2” 1.50 4.23 3.54 1.48 1.00 1/4-20 6.10

2” 1.97 4.90 4.25 1.50 1.00 1/4-20 6.10

HPU Item #14, 18, 27

Hydraulic Power Unit - Item #14, 18, 27Hydraulic Power Unit - Item #14, 18, 27

8-618-61

15/40/80CN Series Medium Pressure Filters

HPU Item #15, 28 Hydraulic Power Unit - Item #15, 28Hydraulic Power Unit - Item #15, 28

8-628-62

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

Applications for CN series Filters

■ Compressor Lube Oil

■ Off-line Filter Loops

■ Machine Tools (Automotive Standard)

■ Hydrostatic Drive Charge Pumps

■ Mobile Equipment

■ Pilot Lines For Servo Controls

■ Oil Patch Drilling Equipment

■ Injection Molding

This partial list of applications for Parker “CN” series filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the “CN” filter, applications such as those listed were restricted by limitations of a spin-on can, or forced into the higher cost range of high pressure filters.

The “CN” series fills this gap, and now with the newly increased fatigue rating from 550 to 800 psi, the applications are expanded.

Features Advantages Benefits

· 800 psi fatigue rating · Ability to provide reliable service · Reduced downtime due to premature (eight times that of a spin-on) under tough cyclic operating conditions filter failures

· Can be utilized in applications where high · Reduced costs, better “fit” pressure filters may have been only option for the application

· Diametral (side) seal between · Proven reliability in cyclic applications · No downtime, no leaks head and bowl · Reduced importance of bowl torque · Performs with “real world” service

· Dust Seal · Prevents contamination from building · Easier service, no galling up on bowl / head threads

· 40CN-2 meets automotive HF3 standard · Automotive industry acceptance · Satisfies specifications without need

· 15CN meets automotive HF2 standard for further testing and/or approval

· Cast aluminum head · Low profile, lightweight and durable · Less weight, smaller envelop and cleaner appearance

· Standard Ecoglass III elements · Multi-layered design produced high · Great performance value capacity and efficiency · Reliable performance throughout

· Reduces pleat bunching, element life keeps performance consistent · Reduces downtime, maximizes element life

· Complete performance data disclosure · All pertinent information is provided in · No hidden deficiencies an easy-to-compare format · Easy selection of proper filtration

· Visual, electrical or electrical/visual · Check element condition at a glance · Optimize element life, prevent bypassing indicators available · Right style for the application · Matches your system electrical connections

Ecoglass III Replacement Elements Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements feature 100% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (60% less weight) for easier servicing.

The Ecoglass III elements utilize the same proprietary media design as our Microglass III line of replacement elements.

With Ecoglass III, a reusable core is installed into the filter housing and remains in service throughout the life of the assembly.

HPU Item #15, 28

8-638-63

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH69

Features

Ports

■ SAE, NPT or flange face (80CN) provides mounting flexibility.

Diametral (side) Seal

Dust Seal

■ Protects head and bowl threads from external contamination buildup.

Element Assembly

■ High efficiency (Bx>200), high capacity Ecoglass III media with it’s multi-layered design is unequalled in performance.

Element Condition Indicators

■ Available in visual or electrical, with a choice of several power connections (E3 shown).

Head

■ Cast aluminum is rugged with small profile for easy mounting.

Bypass

■ Cartridge style bypass has good sealing characteristics and low hysteresis. Choice of two settings to match application needs.

Bowl

■ Anodized aluminum is lightweight and corrosion resistant. Friction grip tape prevents slipping when rotating the bowl during service.

Drain Port (optional)

■ Optional drain port allows for easy element servicing.

HPU Item #15, 28

8-648-64

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

15CN-1 Element Performance

PS

ID

1.5

1.0

0.5

0.0

GPM

02Q

20Q

10Q

05Q

B

AR

LPM

150SUS

0 10 20 30 40 50 60 70

0 5 10 15 20

PS

ID

1.5

1.0

0.5

0.0

GPM

B

AR

LPM

150SUS

EMPTY HOUSING

¾” Nominal Port Size

1” Nominal Port Size

0 5 10 15 20

0 10 20 30 40 50 60 70

Flow vs. Pressure Loss

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

5Q

0 4 8 12 16 20

PSID

Capacity

20Q 10Q 5Q 2Q

0 1 2 3 4 5 6 7

Capacity grams

BAR

Results typical from Multi-pass tests run per test standard ISO 16889 @ 10 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

HPU Item #15, 28

8-658-65

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH71

PS

ID

GPM

02Q

20Q

05Q

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

10Q

0 20 40 60 80

0 5 10 15 20 25

PS

ID

GPM

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

EMPTY HOUSING

¾” N ominal P ort Size

1” Nominal Port Size

0 20 40 60 80

0 5 10 15 20 25

15CN-2 Element Performance

Flow vs. Pressure Loss

Results typical from Multi-pass tests run per test standard ISO 16889 @ 15 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

5Q

0 4 8 12 16 20

PSID

Capacity

20Q

2Q 5Q

10Q

0 5 10 15 20

Capacity grams

BAR

HPU Item #15, 28

8-668-66

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

40CN-1 Element Performance

PS

ID

GPM

02Q

20Q

05Q

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

10Q

0 20 40 60 80 100

0 50 100 150 200 250 300 350

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

5Q

0 4 8 12 16 20

PS

ID

GPM

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

EMPTY HOUSING

1½” Nominal P ort S ize

0 50 100 150 200 250 300 350

0 20 40 60 80 100

1” N om in al P or t S ize

PSID

Capacity

0 10 20 30 40

Capacity grams

2Q 5Q

10Q 20Q

BAR

Results typical from Multi-pass tests run per test standard ISO 16889 @ 15 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

Flow vs. Pressure Loss

HPU Item #15, 28

8-678-67

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH73

40CN-2 Element Performance

PS

ID

GPM

02Q

20Q

05Q

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

10Q

0 20 40 60 80 100

0 50 100 150 200 250 300 350

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

5Q

0 4 8 12 16 20

PS

ID

GPM

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

EMPTY HOUSING

1½” N ominal P ort S ize

0 50 100 150 200 250 300 350

1” N om in al P or t S ize

0 20 40 60 80 100

PSID Capacity

0 10 20 30 40 50 60 70 Capacity grams

BAR

2Q

10Q 20Q

5Q

Results typical from Multi-pass tests run per test standard ISO 16889 @ 30 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

Flow vs. Pressure Loss

HPU Item #15, 28

8-688-68

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

40CN-3 Element Performance

PSID BAR

Capacity

2Q

10Q 20Q

5Q

0 20 40 60 80 100 120

Capacity grams

Results typical from Multi-pass tests run per test standard ISO 16889 @ 45 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

Flow vs. Pressure Loss

HPU Item #15, 28

8-698-69

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

80CN-1 Element Performance

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

5Q

0 4 8 12 16 20

PS

ID

GPM

02Q

20Q

05Q

B

AR

LPM

150 SUS

1.5

1.0

0.5

0.0

10Q

0 50 100 150 200 250 300 350

0 20 40 60 80 100

LPM

PS

ID

0.6

0.5

0.4

0.3

0.2

0.1

0.0

GPM

Empty Housing

B

AR

150 SUS

2” Nominal Port Size1½” Nominal Port Size

0 50 100 150 200 250 300 350

0 20 40 60 80 100

Results typical from Multi-pass tests run per test standard ISO 16889 @ 45 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

Flow vs. Pressure Loss

PSID

Capacity

2Q

10Q 20Q

5Q

0 20 40 60 80 100

Capacity grams

BAR

HPU Item #15, 28

8-708-70

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

Efficiency % Efficiency

Beta Rating

10000

99.9

99.5 99.0100

2 50.0

95.0

Micron Size (c)

2Q

10Q

20Q

5Q

0 4 8 12 16 20

PS

ID

GPM

02Q

20Q

05Q

LPM

150 SUS

10Q

B

AR

1.5

1.0

0.5

0.0

0 100 200 300 400 500

0 30 60 90 120 150

PS

ID

GPM

LPM

150 SUS

1.5

1.0

0.5

0.0

0 100 200 300 400 500

0 30 60 90 120 150

1½” N ominal P ort Size

2” Nominal Port Size

PSID

Capacity

0 20 40 60 80 100 120 140

Capacity grams

BAR

20Q

2Q 5Q 10Q

80CN-2 Element Performance

Flow vs. Pressure Loss

Results typical from Multi-pass tests run per test standard ISO 16889 @ 70 gpm to 100 psid terminal - 10 mg/L BUGL Refer to Appendix on pages 227-228 for relationship to test standard ISO 4572.

HPU Item #15, 28

8-718-71

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

Specifications: CN Series Pressure Ratings:

Maximum Allowable Operating Pressure (MAOP): 1000 psi (69 bar) Rated Fatigue Pressure: 800 psi (55.2 bar) Design Safety Factor: 2.5:1

Operating Temperatures:

Buna: -40oF (-40oC) to 225oF (107oC) Fluorocarbon: -15oF (-26oC) to 275oF (135oC)

Element Collapse Rating:

Standard: 150 psi (10.3 bar)

Materials:

Head and Bowl: Aluminum Indicators: Aluminum body, plastic connectors Bypass: Nylon

Element Condition Indicators:

Visual 360o green/red auto reset Electrical/Visual

5A @ 240VAC, 3A @ 28VDC

Electrical-Heavy Duty .25A(resistive) MAX 5 watts 12 to 28 VDC & 110 to 175 VAC Color code: White (common), Black (normally open), Blue (normally closed)

Weights (approximate):

Model Single length Double length 15CN 2.5 lb. (1.13 kg) 3.5 lb. (1.6 kg) 40CN 4.5 lb. (2.00 kg) 5.5 lb. (2.49 kg) 80CN 12.4 lb. (5.62 kg) 15.2 lb. (6.89 kg)

Element Removal Clearance

2.50 (63.5)

H

I

F

G

4 Mounting Holes 1/4”-20 UNC x 0.28 (7.1)

K

J

L

Torque 25-30 ft. lbs.

D

C

Torque 15 - 20 ft. lbs.

SAE - 4

Drain Plug

1.00 (25.4) Nominal Hex

E

Single Lengt h A

Double Lengt h B

M2, E2, E3-

2.38 (60.5)

H-3.31(84.1) H1-2.58 (65.5)

H

F

G

I

K

L

J

Torque 25 - 30 ft. lbs.

Element Removal Clearance

2.50 (63.5)

Torque 42 - 50 ft. lbs.

1.00 (25.4) Nominal Hex

SAE - 4

Drain Plug

E

C

D

Single Lengt h A

Double Lengt h B

4 Mounting Holes 5/16”-18 UNC x 0.50 (12.7)

M2, E2, E3-

2.38 (60.5)

H-3.31(84.1) H1-2.58 (65.5)

H

L

G

I

K

F

4 Mounting holes

5/16 - 18 UNC X 63 (16.0)

D

C

Torque 60-70 ft. lbs.

E

SAE- 4

Drain Plug

1.00 (25.4) Nominal Hex

Element Removal Clearance

2.50 (13.5)

Single Lengt h A

Double Lengt h B

M2, E2, E3-

3.06 (77.7)

H-3.93 (99.8) H1-3.20 (81.3)

J

15CN

A B C D E F G H I J K L

6.17(156.6) 9.87(250.7) 1.83(46.5) 1.09(25.4) 2.80(71.1) 3.38(85.9) 2.88(73.2) 3.25(82.6) 1.50(88.1) .90(22.9) 1.69(42.9) 1.44(36.6)

6.73(170.8) 10.33(262.4) 2.44(62.0) 1.28(32.6) 4.22(107.2) 5.00(127.0) 4.37(111.0) 4.80(121.9) 2.44(62.0) 1.25(31.8) 2.32(58.8) 2.37(60.2)

11.06(280.9) 15.81(401.6) 3.06(77.7) 1.95(49.5) 4.91(124.8) 6.25(158.7) 3.25(82.6) 5.96(151.4) 4.00(101.6) 1.62(41.1) 3.12(79.4) 1.63(41.3)

Dimensions are in(mm)

15CN

80CN

40CN

E2 E3

40CN 80CN

HPU Item #15, 28

8-728-72

Parker Hannifin Corporation Hydraulic Filter Division Metamora, OH

Element Service A. Stop the system’s power unit.

B. Relieve any system pressure in the filter line.

C. Drain the filter bowl if drain port option is provided.

D. Loosen and remove bowl.

E. Remove element by pulling downward with a slight twisting motion and discard.

F. Check bowl o-ring for damage and replace if necessary.

G. Lubricate element o-ring with system fluid and place on post in filter head.

H. Install bowl and tighten to specified torque.

15CN - 15-20 ft. lbs 40CN - 42-50 ft. lbs 80CN - 60-70 ft. lbs I. Confirm there are no leaks after powering the system.

2 3

Index Description 15CN 40CN 80CN