W9128F-21-R-0043.pdf

SEE ADDENDUM

(No Collect Calls)

W9128F21R0043 21-Jan-2021

b. TELEPHONE NUMBER

402-995-2613

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 12 Feb 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W9128F9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JOHN D HICKMAN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

U.S. ARMY CORPS OF ENGINEERS, OMAHA DIST

CONTRACTING OFFICE

1616 CAPITOL AVENUE

OMAHA NE 68102-4901

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 966752 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

COE PROGRAMS MANAGEMENT BRANCH

LAURA STEPHENS

USA, OMAHA CENWO-PM-P

1616 CAPITOL AVE

OMAHA NE 68102-4901

TEL: 402-995-2802 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$16,500,000

NAICS:

541990

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W9128F21R0043

Section SF 1449 - CONTINUATION SHEET

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 Attachment A - General

Security Requirements

Attachment 2 Attachment B Fuel Storage Tank List

Attachment 3 Attachment C Fuel Storage Tank Excel Document

Attachment 4 Attachment D Monthly Progress Report

Attachment 5 Attachment E API inservice Template

Attachment 6 Attachment F API Out of service example

Attachment 7 Attachment G API out of service template

Attachment 8 Attachment H API out of service Telcon brief

Attachment 9 Attachment I Return to service letter

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 180 dys. ADC 1 COE PROGRAMS MANAGEMENT

BRANCH

LAURA STEPHENS

USA, OMAHA CENWO-PM-P

1616 CAPITOL AVE

OMAHA NE 68102-4901

402-995-2802 FOB: Destination

966752

0002 N/A N/A N/A N/A

0003 180 dys. ADC 2 COE PROGRAMS MANAGEMENT

BRANCH

LAURA STEPHENS

USA, OMAHA CENWO-PM-P

1616 CAPITOL AVE

OMAHA NE 68102-4901

402-995-2802

0004 180 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0005 180 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0006 180 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 N/A N/A N/A Government 0003 N/A Government Destination Government 0004 N/A Government Destination Government 0005 N/A Government Destination Government 0006 N/A Government Destination Government

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Kickoff Meeting

FFP

All work complete to conduct the initial kickoff meeting.

PSC CD: H391

NET AMT

0002 2 Tank Tank Cleaning

FFP

All work complete to clean tanks 1 and 4 of facility 1842 and 1921 respectively in accordance with the PWS.

0003 2 Tank API Internal Inspection

FFP

All work complete to conduct internal inspections of tanks 1 and 4 of facility 1842 and 1921 respectively in accordance with the PWS.

0004 2 Tank Wiper Seal Replacement

FFP

All work complete to replace wiper seals at tanks 1 and 4 of facility 1842 and 1921 respectively in accordance with the PWS.

0005 1 Tank API External Inspection

FFP

All work complete to perform an external inspection on tank 2 at facility number 1841 in accordance with the PWS.

0006 3 Tank Draft and Final Reports

FFP

All work complete to furnish drafts and final reports required in accordance with the PWS.

PERFORMANCE WORK STATEMENT

Part 1 General Information

1. GENERAL: This is a non-personnel services contract to perform inspections on Department of Defense fuel tanks. This service may entail the removal, disposal, and/or transfer of remaining fuel, tank cleaning, providing strapping charts, replacing wiper seals, and provide an above-ground storage tank (AST) Inspection on tank(s) listed in Attachment B. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. As such contract service providers shall be accountable solely to the Contractor who, in turn, is responsible to the Government.

1.1. Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to execute removal, transfer, or disposal of remaining fuel, replace wiper seals, provide strapping charts, clean the tank, and perform an AST (in service or out of service) inspection on the tank(s) as applicable at the location and tanks specified in attachment B and wiper seal replacement as defined in this Performance Work Statement (PWS) except for those items specified as government furnished property and services. The contractor shall perform to the standards in this contract.

1.2. Background: The inspection is being conducted as part of a maintenance cycle.

Compliance dates for each tank are listed in attachment B.

1.3. Objectives: Perform the required AST inspections, and all required items (fuel removal, transfer, or disposal, replace wiper seals, provide strapping charts, clean the tank), on the tank(s) specified in attachment B at the specified location above.

1.4. Scope: Perform multiple external and internal AST inspections on API. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to execute the removal, transfer, or disposal of remaining fuel, replace wiper seals, provide strapping charts, clean the tank, and perform an AST (in service or out of service) inspection on the tank(s) specified in attachment B. The tank Inspection shall be in conformance with applicable industry standards (API 653), NFPA 30, NFPA 326, UFGS 33 01 50.60, and in compliance with 40 CFR 112, UFC 3-460-01, UFC 3-460-03 and any other applicable federal, state, local, service or host nation requirements. Table 8-1 within UFC 3-460-01 shall be followed. All tank appurtenances that are required shall be documented along with all required appurtenances that aren’t present. Alarms, Automatic Tank Gauge equipment, and all tank appurtenances shall be tested and verified. The attached Inspection Report template should be utilized in submitting both the DRAFT and FINAL inspection reports. Contractor shall leave a clean and orderly site upon the completion of the inspection.

1.5 Period of Performance: The period of performance shall be for 180 calendar days starting at the date of contract award.

1.6. General Information

1.6.1. Quality Assurance: The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.6.2. Recognized Holidays: Contractor is not required to perform services on Federally recognized Holidays during the POP. Federal Holidays are as follows:

New Year’s Day Martin Luther King Jr. Day Presidents’ Day Memorial Day Independence Day Labor Day Columbus Day Veterans’ Day Thanksgiving Christmas

1.6.3. Hours of Operation: The contractor is responsible for conducting business, between the hours of 0730-1630 Monday through Friday, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. Other than normal duty hours must be coordinated with the KO or his/her designated representative. The Contractor must, at all times, maintain an adequate workforce for https://www.federalpay.org/holidays/new-years-day the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall maintain stability and continuity of the workforce.

1.6.4. Place of Performance: The work to be performed under this contract will be performed at the installation identified in Attachment B.

1.6.5. Type of Contract: The government will award a Firm Fixed Price Contract.

1.6.6. Security Requirements: There are no security requirements for this contract.

1.6.7. Site Access: Contractor shall coordinate with Installation personnel for access to the site. Points of contact for the installation will be provided upon award.

1.6.8. Kick-Off Meeting: The Contractor shall coordinate with USACE PM and conduct a kickoff meeting prior to field activities. This can be accomplished either prior to mobilization and inspection activities or onsite prior to commencement of inspection activities accomplished at this meeting.

For Out of Service / Internal API 653 Inspections the Contractor shall be responsible to establish and coordinate a teleconference within 48 hours of inspection completion prior to placing tank back in service. This teleconference will review deficiencies found during the inspection with the Government making the final decision on whether to place this tank back into service. The Contractor can use Attachment H - API OUT-OF-SERVICE TELECON BRIEFING TEMPLATE or their own format however this document shall include the next recommended inspection intervals for both In-Service and Out-of- Service Inspection, and State regulated inspection intervals, if applicable. Also, when listing the findings, they shall be categorized as either “Mandatory”, “Short Term” or “Long Term”.

These meetings shall be at no additional cost to the government.

Point of Contacts will be provided at award.

1.6.9. Contracting Officer Representative (COR): The (COR) will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration The COR is authorized to perform the following functions:

assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract:

issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regards to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting order.

1.6.10. Key Personnel: The following personnel are considered key personnel by the government: Certified API 653 Inspector, Site Safety Manager, and Project Manager.

1.6.11. Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations.

This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE. Anything that can be physically delivered but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL. Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE Surveillance Plan (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11. SUBCONTRACTOR. One that enters into a contract with a prime contractor.

The Government does not have privity of contract with the subcontractor.

2.1.12. WORKDAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12. WORK WEEK. Monday through Friday, unless instructed otherwise by installation.

2.2. ACRONYMS:

ACOR Alternate Contracting Officer's Representative AFARS Army Federal Acquisition Regulation Supplement ANG Army National Guard AR Army Regulation AST Aboveground Storage Tank API American Petroleum Institute ATG Automatic Tank Gauging AWWA American Water Works Association CCE Contracting Center of Excellence CFR Code of Federal Regulations

CONUS Continental United States (excludes Alaska and Hawaii) COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DAF Department of the Air Force DD250 Department of Defense Form 250 (Receiving Report) DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DMDC Defense Manpower Data Center DOD Department of Defense EPA Environmental Protection Agency FAR Federal Acquisition Regulation HIPAA Health Insurance Portability and Accountability Act of 1996 IAP International Airport KO Contracting Officer MOGAS Motor Gasoline NFPA National Fire Protection Association OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs OSS Out of Service PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program TE Technical Exhibit UFC Unified Facilities Criteria UFGS Unified Facilities Guide Specification

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: No Government furnished items or services are required.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1. General: The Contractor shall furnish all supplies, equipment, facilities and services required to perform work under this contract that are not listed under Part 3 of this PWS.

4.2. Equipment: The Contractor shall provide all tools and inspection equipment needed to perform the inspection.

4.3. Project Inspection Management Plan (PMP): After contract award the Contractor shall develop a Project / Inspection Management Plan for the assigned facility. The Contractor shall review all available Tank data and inspection reports, particularly the installation SPCC Plan’s Tank inspection requirements, previous inspection reports, and existing owner inspection reports. The Contractor may also submit additional data requests to the Installation for any other information which may be helpful in pre-inspection and Work Plan preparation. As part of the initial PMP, the Contractor shall prepare and include a brief (< 10 pages) Work Plan, as an attachment, which will include proposed schedule, inspection activities, personnel performing inspection, required training certificates, and additional data or support requests.

4.4. Health and Safety Plan (HSP) and Accident Prevention Plan (APP): The Contractor will prepare a Health and Safety Plan (HSP) to comply with 29 Code of Federal Regulations (CFR) 1910 and 1926 as well as applicable Military Service (Army, Air Force, or Navy), OSHA, state, host nation, and local and installation health and safety regulations regarding the proposed work effort. Qualifications for individuals who will be on-site for safety shall be submitted in the HSP

The Accident Prevention Plan (APP) is required by FAR clause 52.236-13. The APP describes the methods by which the contractor or USACE personnel will meet the safety and health requirements listed in EM 385-1-1. Entry into Confined Spaces shall comply with the requirements of 29 CFR 1910.146.

Abbreviated Accident Prevention Plans may be developed and submitted per Form A- 01 Abbreviated Accident Prevention Plan Checklist Page A-13 of the EM 385-1-1. This may be submitted in order to develop a plan more specific to the work performed under this PWS but shall still comply as indicated above.

PART 5

SPECIFIC TASKS

5. Specific Tasks:

5.1. Basic Services.

Remove and dispose of 500 gallons of fuel product for Tank 1921 (Tank 4) and 100 gallons of fuel for Tank 1842.

Perform an Internal AST inspection to include visual inspection of the containment area on tanks 1921 and 1842. These inspections must be phased. At no time will both tanks be out of service during these inspections. Coordination must be made with the installation before inspection.

On tanks 1941 and 1842, existing wiper seals (foam log, double wiper etc.) shall be removed and completely replaced with a new double wiper seal in accordance with UFGS 33 56 21.17 and the IFR manufacturer's recommendations; penetration seals in floating pan will also need to be replaced.

Perform an external AST inspection to include visual inspection of the containment area Tank 1841

Any fuel or residual product that will be disposed of the contractor will be responsible to coordinate with environmental and safety authorities having jurisdiction to obtain and execute required permits, manifests, etc. Clean the tank and perform an internal AST inspection to also include the visual inspection of the containment area.

Tank cleaning shall be done in accordance with UFGS 33 01 50.60. The tank Inspection shall be in conformance with applicable industry standards API 653, NFPA 30, NFPA 326, UFGS 33 01 50.60, and in compliance with 40 CFR 112, UFC 3-460-01, UFC 3- 460-03 and any other applicable federal, state, local, service or host nation requirements. At a minimum, table 8-1 within UFC 3-460-01 shall be followed.

All tank appurtenances that are required shall be documented along with all required appurtenances that aren’t present. Alarms, Automatic Tank Gauge equipment, and all tank appurtenances shall be tested and verified. The attached Inspection Report template should be utilized in submitting both the DRAFT and FINAL inspection reports.

Contractor shall leave a clean and orderly site upon the completion of the inspection.

The contractor shall visually inspect containment for ability to contain the entire contents of the tank in the event of catastrophic failure, assessing for cracks, settlement, and deterioration. Record dimensions of cracks and provide photographic evidence of each deficiency. Visually assess the liner integrity and impermeability where applicable.

Drain Line and Release Valve shall be Hydrostatically tested. The Contractor shall perform a hydrostatic test to ensure the drainpipe and release valve do not leak. Test in accordance with applicable requirements of AWWA C600 for hydrostatic testing. Ensure the release valve is closed and pressurize the end of the pipe within the containment basin sump. Test for leakage by filling the pipe with water and pressurizing to 10 psi using a suitable pump connected to the pipeline. The test pressure shall not vary by more than ±1 psi for the duration of the test. Hold this pressure for not less than 2 hours. If the system does not hold pressure, check the outfall point to see if water is bypassing the valve. Test pressure shall be maintained during the test by adding makeup water through the pressure test pump into the pipeline. Accurately note the amount of makeup water required to maintain pressure during the test.

Containment Drain Inlet. The Contractor shall perform a hydrostatic test to ensure the integrity of the inlet sump. Test for leakage by filling the inlet with water to a level at least 1-2 inches above the top of the inlet structure. The inlet shall hold this water for not less than 2 hours with no measurable change in the water level.

Provide telecon out briefing for OOS inspections

Provide legible tank stencil or label on tanks 1842 & 1921 consisting of black letters at least 1” in height, stating the date cleaned and inspected.

Date Cleaned and Inspected: Day-Month-Year ABC Contracting Supervisor: John Doe

All tank appurtenances that are required shall be documented along with all required appurtenances that aren’t present. Alarms, Automatic Tank Gauge equipment, and all tank appurtenances shall be tested and verified. The attached Inspection Report template should be utilized in submitting both the DRAFT and FINAL inspection reports.

Contractor shall leave a clean and orderly site upon the completion of the inspection.

The contractor shall visually inspect containment for ability to contain the entire contents of the tank in the event of catastrophic failure, assessing for cracks, settlement, and deterioration. Record dimensions of cracks and provide photographic evidence of each deficiency. Visually assess the liner integrity and impermeability where applicable.

PART 6

APPLICABLE PUBLICATIONS

6. APPLICABLE PUBLICATIONS (CURRENT EDITIONS)

6.1. The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures.

AMERICAN PETROLEUM INSTITUTE (API)

API 650 Welded Tanks for Oil Storage API 653 Tank Inspection, Repair, Alteration, and Reconstruction

STEEL TANK INSTITUTE (STI)

SP001 Standard for the Inspection of Aboveground Storage Tanks

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 30 Flammable and Combustible Liquids Code NFPA 70 National Electrical Code (NEC) NFPA 326 Standard for Safeguarding of Tanks and Containers for Entry, Cleaning, or Repairs

UNIFIED FACILITIES CRITERIA (UFC)

UFC 3-460-01 Design: Petroleum Fuel Facilities UFC 3-460-03 Petroleum Fuel Systems Maintenance

UNIFIED FACILITIES GUIDE SPECIFICATIONS (UFGS)

UFGS 33 01 50.60 Cleaning of Petroleum Storage Tanks UFGS 33 56 21.17 Single Wall Aboveground Fixed Roof Steel POL Storage

Tank

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

40 CFR 112 EPA: Oil Pollution Prevention

PART 7

DELIVERABLES SCHEDULE

DELIVERABLE SCOPE OF

WORK

PARAGRAPH

DUE DATE

Project Inspection Management Plan/Work Plan & Health and Safety Plan (Draft)

1.6.1. and 1.6.1.1.

15 days after award

Project Inspection Management Plan/Work Plan & Health and Safety Plan (Final)

1.6.1. and 1.6.1.1.

5 days after receipt of comments

Inspection and Evaluation Report – (Draft) 1.4. 21 days after Field Inspection

Inspection and Evaluation Report – to include populated Attachment C Excel Sheet for each FAC # (Final)

1.4. 7 days after receipt of comments

PART 8

PERFORMANCE REQUIREMENTS SUMMARY

The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

PART 9

ATTACHMENT/TECHNICAL EXHIBIT LISTING

9. Attachment/Technical Exhibit List:

Performance Objective

Standard Performance Threshold

Method of Surveillance

PRS # 1.

Kick-Off Meeting with USACE and Stakeholders

State, local, and federal requirements regulating fuel storage tanks

100% The contractor will schedule this Meeting either on-site prior to commencement of work or via tele-con prior to being onsite. Submit agenda and meeting minutes to stakeholders.

PRS # 2.

Remove and dispose of fuel per Scope for AST API Internal Inspections

State, local, and federal requirements regulating fuel storage tanks

100% Random Inspection

Contractor will submit manifests to COR.

PRS # 3.

Clean AST

State, local, and federal requirements regulating fuel storage tanks

100% Random Inspection.

PRS # 4.

Provide an API External Inspections and API Internal Inspections.

For Internal Inspections:

Replace manway bolts with stainless steel bolts and replace manway gasket prior to filling the OOS tanks. Verify no leaks after closing the tank and fill past first shell course manway elevation with fuel.

State, local and federal requirements regulating fuel storage tanks.

100% Random Inspection.

For Internal inspections, government may or may not send a representative to visibly oversee floor scan.

The contractor is to provide a DRAFT and FINAL report for MCX review and comment.

PRS # 5.

Out-Brief Meeting with USACE and Stakeholders

State, local, and federal requirements regulating fuel storage tanks

100% Contractor will coordinate a tele-con and distribute the report of findings 24 hours prior to the scheduled conference.

PRS # 6.

Replace the existing wiper seal with a double wiper seal and replace all penetration seals.

Manufacturer’s Instructions as well as State, local, and federal requirements regulating fuel storage tanks

100% Random Inspection.

9.1. Attachment A – General Installation Security Requirements

9.2. Attachment B – Fuel Storage Tank List

9.3. Attachment C – Fuel Storage Tank Excel Document

9.4. Attachment D – Monthly Contractors Progress, Management and Status Report

9.5. Attachment E – API In-Service Template

9.6. Attachment F – API Out-of-Service Inspection Report Example

9.7. Attachment G – API Out-of-Service Inspection Report Template

9.8. Attachment H – API Out-of-Service Telecon Briefing Template

9.9. Attachment I – Return To Service Letter

SERVICE CONTRACT WAGE RATES

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4191 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 12/21/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New Jersey

Area: New Jersey Counties of Burlington Camden Gloucester

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 17.08 01012 - Accounting Clerk II 19.17 01013 - Accounting Clerk III 21.45 01020 - Administrative Assistant 31.60 01035 - Court Reporter 24.02

01041 - Customer Service Representative I 14.69 01042 - Customer Service Representative II 16.52 01043 - Customer Service Representative III 18.03 01051 - Data Entry Operator I 15.30 01052 - Data Entry Operator II 16.69 01060 - Dispatcher Motor Vehicle 19.64 01070 - Document Preparation Clerk 16.69 01090 - Duplicating Machine Operator 16.69 01111 - General Clerk I 14.98 01112 - General Clerk II 16.35 01113 - General Clerk III 18.35 01120 - Housing Referral Assistant 24.11 01141 - Messenger Courier 15.88 01191 - Order Clerk I 15.19 01192 - Order Clerk II 16.57 01261 - Personnel Assistant (Employment) I 16.96 01262 - Personnel Assistant (Employment) II 18.98 01263 - Personnel Assistant (Employment) III 21.15 01270 - Production Control Clerk 25.39 01290 - Rental Clerk 16.83 01300 - Scheduler Maintenance 19.12 01311 - Secretary I 19.12 01312 - Secretary II 21.84 01313 - Secretary III 24.11 01320 - Service Order Dispatcher 17.55 01410 - Supply Technician 31.60 01420 - Survey Worker 17.95 01460 - Switchboard Operator/Receptionist 15.15 01531 - Travel Clerk I 16.24 01532 - Travel Clerk II 17.06 01533 - Travel Clerk III 18.18 01611 - Word Processor I 15.94 01612 - Word Processor II 17.89 01613 - Word Processor III 20.03 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 25.61 05010 - Automotive Electrician 23.26 05040 - Automotive Glass Installer 22.45 05070 - Automotive Worker 22.45 05110 - Mobile Equipment Servicer 20.79 05130 - Motor Equipment Metal Mechanic 24.09 05160 - Motor Equipment Metal Worker 22.45 05190 - Motor Vehicle Mechanic 24.09 05220 - Motor Vehicle Mechanic Helper 19.84 05250 - Motor Vehicle Upholstery Worker 21.59 05280 - Motor Vehicle Wrecker 22.45 05310 - Painter Automotive 23.26 05340 - Radiator Repair Specialist 22.45 05370 - Tire Repairer 14.89 05400 - Transmission Repair Specialist 24.09 07000 - Food Preparation And Service Occupations 07010 - Baker 13.05 07041 - Cook I 16.15 07042 - Cook II 17.57 07070 - Dishwasher 10.73

07130 - Food Service Worker 11.55 07210 - Meat Cutter 21.89 07260 - Waiter/Waitress 11.28 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.51 09040 - Furniture Handler 17.39 09080 - Furniture Refinisher 22.85 09090 - Furniture Refinisher Helper 19.50 09110 - Furniture Repairer Minor 21.21 09130 - Upholsterer 19.41 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.81 11060 - Elevator Operator 14.17 11090 - Gardener 19.47 11122 - Housekeeping Aide 14.17 11150 - Janitor 14.17 11210 - Laborer Grounds Maintenance 16.22 11240 - Maid or Houseman 12.90 11260 - Pruner 14.97 11270 - Tractor Operator 18.55 11330 - Trail Maintenance Worker 16.22 11360 - Window Cleaner 15.35 12000 - Health Occupations 12010 - Ambulance Driver 19.23 12011 - Breath Alcohol Technician 24.61 12012 - Certified Occupational Therapist Assistant 30.49 12015 - Certified Physical Therapist Assistant 30.09 12020 - Dental Assistant 21.28 12025 - Dental Hygienist 42.78 12030 - EKG Technician 35.61 12035 - Electroneurodiagnostic Technologist 35.61 12040 - Emergency Medical Technician 19.23 12071 - Licensed Practical Nurse I 21.98 12072 - Licensed Practical Nurse II 24.61 12073 - Licensed Practical Nurse III 27.42 12100 - Medical Assistant 16.93 12130 - Medical Laboratory Technician 28.18 12160 - Medical Record Clerk 20.59 12190 - Medical Record Technician 24.61 12195 - Medical Transcriptionist 18.90 12210 - Nuclear Medicine Technologist 42.50 12221 - Nursing Assistant I 11.80 12222 - Nursing Assistant II 13.27 12223 - Nursing Assistant III 14.48 12224 - Nursing Assistant IV 16.25 12235 - Optical Dispenser 28.65 12236 - Optical Technician 20.09 12250 - Pharmacy Technician 15.59 12280 - Phlebotomist 18.44 12305 - Radiologic Technologist 32.24 12311 - Registered Nurse I 29.51 12312 - Registered Nurse II 32.76 12313 - Registered Nurse II Specialist 32.76 12314 - Registered Nurse III 39.32 12315 - Registered Nurse III Anesthetist 39.32

12316 - Registered Nurse IV 47.11 12317 - Scheduler (Drug and Alcohol Testing) 30.48 12320 - Substance Abuse Treatment Counselor 24.45 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.74 13012 - Exhibits Specialist II 28.77 13013 - Exhibits Specialist III 35.16 13041 - Illustrator I 22.94 13042 - Illustrator II 30.61 13043 - Illustrator III 37.43 13047 - Librarian 31.00 13050 - Library Aide/Clerk 16.83 13054 - Library Information Technology Systems 27.98 Administrator 13058 - Library Technician 19.38 13061 - Media Specialist I 19.99 13062 - Media Specialist II 22.37 13063 - Media Specialist III 24.93 13071 - Photographer I 19.31 13072 - Photographer II 21.62 13073 - Photographer III 26.78 13074 - Photographer IV 32.76 13075 - Photographer V 39.63 13090 - Technical Order Library Clerk 16.98 13110 - Video Teleconference Technician 23.14 14000 - Information Technology Occupations 14041 - Computer Operator I 18.50 14042 - Computer Operator II 20.70 14043 - Computer Operator III 23.06 14044 - Computer Operator IV 25.64 14045 - Computer Operator V 28.39 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.50 14160 - Personal Computer Support Technician 25.64 14170 - System Support Specialist 34.68 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.14 15020 - Aircrew Training Devices Instructor (Rated) 40.11 15030 - Air Crew Training Devices Instructor (Pilot) 48.06 15050 - Computer Based Training Specialist / Instructor 33.14 15060 - Educational Technologist 38.04 15070 - Flight Instructor (Pilot) 48.06 15080 - Graphic Artist 26.80 15085 - Maintenance Test Pilot Fixed Jet/Prop 47.08 15086 - Maintenance Test Pilot Rotary Wing 47.08 15088 - Non-Maintenance Test/Co-Pilot 47.08 15090 - Technical Instructor 27.19 15095 - Technical Instructor/Course Developer 33.25 15110 - Test Proctor 21.94

15120 - Tutor 21.94 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 12.03 16030 - Counter Attendant 12.03 16040 - Dry Cleaner 14.28 16070 - Finisher Flatwork Machine 12.03 16090 - Presser Hand 12.03 16110 - Presser Machine Drycleaning 12.03 16130 - Presser Machine Shirts 12.03 16160 - Presser Machine Wearing Apparel Laundry 12.03 16190 - Sewing Machine Operator 15.30 16220 - Tailor 16.31 16250 - Washer Machine 12.60 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 25.24 19040 - Tool And Die Maker 29.17 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 19.21 21030 - Material Coordinator 25.30 21040 - Material Expediter 25.30 21050 - Material Handling Laborer 14.56 21071 - Order Filler 15.27 21080 - Production Line Worker (Food Processing) 19.21 21110 - Shipping Packer 17.20 21130 - Shipping/Receiving Clerk 17.20 21140 - Store Worker I 17.10 21150 - Stock Clerk 21.08 21210 - Tools And Parts Attendant 19.21 21410 - Warehouse Specialist 19.21 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 35.41 23019 - Aircraft Logs and Records Technician 30.04 23021 - Aircraft Mechanic I 34.04 23022 - Aircraft Mechanic II 35.41 23023 - Aircraft Mechanic III 36.66 23040 - Aircraft Mechanic Helper 26.84 23050 - Aircraft Painter 32.78 23060 - Aircraft Servicer 30.04 23070 - Aircraft Survival Flight Equipment Technician 32.78 23080 - Aircraft Worker 31.40 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 31.40 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 34.04

II

23110 - Appliance Mechanic 27.62 23120 - Bicycle Repairer 18.28 23125 - Cable Splicer 41.86 23130 - Carpenter Maintenance 27.64 23140 - Carpet Layer 27.31 23160 - Electrician Maintenance 33.75 23181 - Electronics Technician Maintenance I 27.17 23182 - Electronics Technician Maintenance II 28.29 23183 - Electronics Technician Maintenance III 29.38 23260 - Fabric Worker 27.57 23290 - Fire Alarm System Mechanic 25.94

23310 - Fire Extinguisher Repairer 25.50 23311 - Fuel Distribution System Mechanic 30.59 23312 - Fuel Distribution System Operator 25.62 23370 - General Maintenance Worker 21.59 23380 - Ground Support Equipment Mechanic 34.04 23381 - Ground Support Equipment Servicer 30.04 23382 - Ground Support Equipment Worker 31.40 23391 - Gunsmith I 25.50 23392 - Gunsmith II 27.54 23393 - Gunsmith III 29.56 23410 - Heating Ventilation And Air-Conditioning 26.57 Mechanic 23411 - Heating Ventilation And Air Contidioning 27.61 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 27.98 23440 - Heavy Equipment Operator 34.13 23460 - Instrument Mechanic 35.63 23465 - Laboratory/Shelter Mechanic 28.54 23470 - Laborer 15.83 23510 - Locksmith 30.01 23530 - Machinery Maintenance Mechanic 27.65 23550 - Machinist Maintenance 25.25 23580 - Maintenance Trades Helper 18.52 23591 - Metrology Technician I 35.63 23592 - Metrology Technician II 37.07 23593 - Metrology Technician III 38.39 23640 - Millwright 29.50 23710 - Office Appliance Repairer 23.06 23760 - Painter Maintenance 23.53 23790 - Pipefitter Maintenance 31.06 23810 - Plumber Maintenance 29.66 23820 - Pneudraulic Systems Mechanic 29.56 23850 - Rigger 29.56 23870 - Scale Mechanic 27.54 23890 - Sheet-Metal Worker Maintenance 32.29 23910 - Small Engine Mechanic 20.67 23931 - Telecommunications Mechanic I 27.00 23932 - Telecommunications Mechanic II 28.08 23950 - Telephone Lineman 37.73 23960 - Welder Combination Maintenance 23.10 23965 - Well Driller 28.93 23970 - Woodcraft Worker 29.56 23980 - Woodworker 25.48 24000 - Personal Needs Occupations 24550 - Case Manager 16.98 24570 - Child Care Attendant 12.00 24580 - Child Care Center Clerk 14.96 24610 - Chore Aide 12.06 24620 - Family Readiness And Support Services 16.98 Coordinator 24630 - Homemaker 16.98 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 30.78 25040 - Sewage Plant Operator 27.89 25070 - Stationary Engineer 30.78

25190 - Ventilation Equipment Tender 24.27 25210 - Water Treatment Plant Operator 27.89 27000 - Protective Service Occupations 27004 - Alarm Monitor 24.42 27007 - Baggage Inspector 14.50 27008 - Corrections Officer 32.33 27010 - Court Security Officer 33.73 27030 - Detection Dog Handler 18.81 27040 - Detention Officer 32.33 27070 - Firefighter 32.98 27101 - Guard I 14.50 27102 - Guard II 18.81 27131 - Police Officer I 32.16 27132 - Police Officer II 35.73 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.92 28042 - Carnival Equipment Repairer 12.66 28043 - Carnival Worker 9.59 28210 - Gate Attendant/Gate Tender 16.04 28310 - Lifeguard 12.78 28350 - Park Attendant (Aide) 17.94 28510 - Recreation Aide/Health Facility Attendant 12.49 28515 - Recreation Specialist 22.22 28630 - Sports Official 14.29 28690 - Swimming Pool Operator 17.23 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 28.59 29020 - Hatch Tender 28.59 29030 - Line Handler 28.59 29041 - Stevedore I 27.35 29042 - Stevedore II 29.85 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 43.35 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 29.89 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 32.93 30021 - Archeological Technician I 20.33 30022 - Archeological Technician II 22.75 30023 - Archeological Technician III 28.18 30030 - Cartographic Technician 28.27 30040 - Civil Engineering Technician 28.60 30051 - Cryogenic Technician I 31.21 30052 - Cryogenic Technician II 34.19 30061 - Drafter/CAD Operator I 20.33 30062 - Drafter/CAD Operator II 22.75 30063 - Drafter/CAD Operator III 25.36 30064 - Drafter/CAD Operator IV 31.21 30081 - Engineering Technician I 18.23 30082 - Engineering Technician II 20.47 30083 - Engineering Technician III 23.23 30084 - Engineering Technician IV 28.83 30085 - Engineering Technician V 35.18 30086 - Engineering Technician VI 42.58 30090 - Environmental Technician 25.04 30095 - Evidence Control Specialist 27.95 30210 - Laboratory Technician 28.25

30221 - Latent Fingerprint Technician I 30.95 30222 - Latent Fingerprint Technician II 34.19 30240 - Mathematical Technician 28.18 30361 - Paralegal/Legal Assistant I 21.69 30362 - Paralegal/Legal Assistant II 26.86 30363 - Paralegal/Legal Assistant III 32.86 30364 - Paralegal/Legal Assistant IV 39.75 30375 - Petroleum Supply Specialist 34.19 30390 - Photo-Optics Technician 28.18 30395 - Radiation Control Technician 34.19 30461 - Technical Writer I 25.22 30462 - Technical Writer II 30.85 30463 - Technical Writer III 37.33 30491 - Unexploded Ordnance (UXO) Technician I 27.56 30492 - Unexploded Ordnance (UXO) Technician II 33.34 30493 - Unexploded Ordnance (UXO) Technician III 39.96 30494 - Unexploded (UXO) Safety Escort 27.56 30495 - Unexploded (UXO) Sweep Personnel 27.56 30501 - Weather Forecaster I 31.21 30502 - Weather Forecaster II 37.65 30620 - Weather Observer Combined Upper Air Or (see 2) 25.36 Surface Programs 30621 - Weather Observer Senior (see 2) 28.18 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 33.34 31020 - Bus Aide 18.08 31030 - Bus Driver 22.26 31043 - Driver Courier 18.13 31260 - Parking and Lot Attendant 11.62 31290 - Shuttle Bus Driver 19.00 31310 - Taxi Driver 14.33 31361 - Truckdriver Light 19.00 31362 - Truckdriver Medium 19.28 31363 - Truckdriver Heavy 23.27 31364 - Truckdriver Tractor-Trailer 23.27 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 16.25 99030 - Cashier 11.80 99050 - Desk Clerk 12.64 99095 - Embalmer 34.20 99130 - Flight Follower 27.56 99251 - Laboratory Animal Caretaker I 13.89 99252 - Laboratory Animal Caretaker II 14.83 99260 - Marketing Analyst 34.41 99310 - Mortician 34.20 99410 - Pest Controller 18.72 99510 - Photofinishing Worker 15.31 99710 - Recycling Laborer 20.59 99711 - Recycling Specialist 23.25 99730 - Refuse Collector 19.33 99810 - Sales Clerk 12.43 99820 - School Crossing Guard 14.65 99830 - Survey Party Chief 26.72 99831 - Surveying Aide 15.85 99832 - Surveying Technician 23.43

99840 - Vending Machine Attendant 16.35 99841 - Vending Machine Repairer 18.68 99842 - Vending Machine Repairer Helper 16.35

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 8 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees.