QUESTIONS - ANSWERS.pdf
PDF 78 KB Posted
- Solicitation number
- W9124J-23-Q-0001
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUESTIONS & ANSWERS
1. Current Axis cameras and exacqVision NVR are Analog systems, correct?
Answer: Yes
3. We are to demo current Axis camera systems and exacqVision NVR systems, correct?
Answer: Remove the old cameras and replace with new ones
4. Note 3.3.2 says to re-use existing Cat5 cabling. Is this cabling that is already installed/terminated for all cameras that we have to upgrade?
Answer: Cabling is intact and runs from room 216 to cameras installed in Bldg. 613. New cables will need to be run from new location of NVR (Room 205 - see diagram). The Gym cameras have CAT 5 installed and can be reused. Plan to run new CAT 5 from room 205 to end points.
5. We can re-use existing pathways and all pathways are enough to install new cameras, correct?
Answer: Yes
6. Are ladders enough for this project?
Answer: 8 foot and 10 feet should be fine
7. We are to re-use existing Cat5 cabling for this project, correct?
Answer: Only the cables from 205 to end points
8. SOW Layout has 5 monitors identified to include the one at the NVR site?
Answer: Yes, we will use the existing monitors, however, cabling will be needed to run from room 205 to room 221 - see diagram
9. Will you be using HDMI over Cat6?
Answer: Yes, if necessary
10. SOW calls for only 1x4 Splitter.
Answer: Yes
11. Will they all have control capabilities or just viewing capabilities.
Answer: Just viewing capabilities
12. SOW calls for the usage of the existing of the Cat5e Cable that’s currently in place?
Answer: For bldg. 610 only. Bldg. 613 - some new cables may be needed from room 205 to end points.
13. Is there enough service loop on both sides to be able to use the same wiring?
Answer: Yes
14b. SOW Calls to move the NVR container from building 613 Room 216 to building 613 room 205. If that’s the case, it sounds like we need to run all new wiring for the cameras?
Answer: There may be some slack, however, plan to run new cables from room 205 to end points.
File details come from the government source that posted it. Updated .