Attachment_02_VOL_2_MH_2122_Riverside_Canal_Specifications_FINAL_Submittal_2019-06-05.pdf

Final Design Specifications

Volume 2 – Technical Specifications

American River Common Features

Natomas Basin – Riverside Canal

Phase 2 Relocation Project and

Reach B Borrow Site Excavation Sacramento County, California

May 29, 2019

U.S. Army Corps of Engineers, Sacramento District

Amer i can Ri ver Common Feat ur es 2122 Nat omas Basi n - Ri ver si de Canal Phase 2 Rel ocat i on Pr oj ect Fi nal Submi t t al

PROJECT TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

01 22 00. 00 10 PRI CE AND PAYMENT PROCEDURES FOR RI VERSI DE CANAL

01 22 00. 00 20 PRI CE AND PAYMENT PROCEDURES FOR BORROW SI TE

01 33 00 SUBMI TTAL PROCEDURES

01 42 00 SOURCES FOR REFERENCE PUBLI CATI ONS

DI VI SI ON 02 - EXI STI NG CONDI TI ONS

02 02 00 SUBSURFACE DATA

02 32 00 SUBSURFACE DRI LLI NG, SAMPLI NG, AND TESTI NG

02 41 00 DEMOLITION

DI VI SI ON 03 - CONCRETE

03 30 00 CAST- I N- PLACE CONCRETE

DI VI SI ON 05 - METALS

05 05 23 STRUCTURAL WELDI NG

05 12 00 STRUCTURAL STEEL

05 50 13 MI SCELLANEOUS METAL FABRI CATI ONS

DI VI SI ON 07 - THERMAL AND MOI STURE PROTECTI ON

07 92 00 JOI NT SEALANTS

DI VI SI ON 09 - FI NI SHES

09 90 00 PAINTING

DI VI SI ON 11 - EQUI PMENT

11 21 10 VERTI CAL PUMPS, AXI AL- FLOW AND MI XED- FLOW I MPELLER- TYPE

11 30 00 WATER METERS

11 50 00 WELDED STEEL PI PE AND HDPE PI PE

11 50 00. 00 40 WELDI NG GENERAL PI PI NG

11 60 00 I RRI GATI ON, PI PI NG, AND GATES

11 60 10 MODULATI NG ELECTRI C ACTUATOR

DI VI SI ON 13 - SPECI AL CONSTRUCTI ON

13 48 00 SEI SMI C PROTECTI ON FOR MI SCELLANEOUS EQUI PMENT

13 48 00. 00 10 SEI SMI C PROTECTI ON FOR MECHANI CAL EQUI PMENT

DI VI SI ON 26 - ELECTRI CAL

26 00 00 BASI C ELECTRI CAL MATERI ALS AND METHODS

26 05 00 COMMON WORK RESULTS FOR ELECTRI CAL

26 05 19 I NSULATED WI RE AND CABLE

26 05 48 SEI SMI C PROTECTI ON FOR ELECTRI CAL EQUI PMENT

26 05 71 LOW VOLTAGE OVERCURRENT PROTECTI VE DEVI CES

26 08 13 ACCEPTANCE TESTI NG

26 24 19 MOTOR CONTROL CENTERS

26 27 13 ELECTRI CI TY METERI NG

26 29 23 VARI ABLE FREQUENCY DRI VE SYSTEMS UNDER 600 VOLTS

26 56 00 EXTERI OR LI GHTI NG

PROJECT TABLE OF CONTENTS Page 1

Tamara Sortman Rectangle

26 90 00 RTU AND I NSTRUMENTATI ON

DI VI SI ON 28 - ELECTRONI C SAFETY AND SECURI TY

28 05 26 GROUNDI NG AND BONDI NG FOR ELECTRONI C SAFETY AND SECURI TY

DI VI SI ON 31 - EARTHWORK

31 00 00 EARTHWORK

31 11 00 CLEARI NG AND GRUBBI NG

31 20 00 SI TE STRI PPI NG AND EXCAVATI ON

31 23 00 BORROW SI TE EXCAVATI ON

DI VI SI ON 32 - EXTERI OR I MPROVEMENTS

32 11 23 AGGREGATE BASE COURSE

32 15 00 AGGREGATE SURFACI NG

32 31 13 FENCES AND GATES

32 92 19 EROSI ON CONTROL SEEDI NG

DI VI SI ON 33 - UTI LI TI ES

33 21 16 WATER I RRI GATI ON WELLS

DI VI SI ON 43 - PROCESS GAS AND LI QUI D HANDLI NG, PURI FI CATI ON, AND STORAGE

EQUIPMENT

43 21 39 PUMPS AND VERTI CAL TURBI NE

- - End of Pr oj ect Tabl e of Cont ent s - -

PROJECT TABLE OF CONTENTS Page 2

SECTI ON TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

SECTI ON 01 33 00

SUBMI TTAL PROCEDURES

08/18

PART 1 GENERAL

1. 1 DEFI NI TI ONS

1. 1. 1 Submi t t al Descr i pt i ons ( SD)

1. 1. 2 Appr ovi ng Aut hor i t y

1. 1. 3 Wor k

1. 2 SUBMI TTALS

1. 3 SUBMI TTAL CLASSI FI CATI ON

1. 3. 1 Gover nment Appr oved ( G)

1. 3. 2 For I nf or mat i on Onl y

1. 4 PREPARATI ON

1. 4. 1 Tr ansmi t t al For m

1. 4. 2 Submi t t al For mat

1. 4. 2. 1 For mat of SD- 01 Pr econst r uct i on Submi t t al s

1. 4. 2. 2 For mat f or SD- 02 Shop Dr awi ngs

1. 4. 2. 2. 1 Dr awi ng I dent i f i cat i on

1. 4. 2. 3 For mat of SD- 03 Pr oduct Dat a

1. 4. 2. 3. 1 Pr oduct I nf or mat i on

1. 4. 2. 3. 2 St andar ds

1. 4. 2. 3. 3 Dat a Submi ssi on

1. 4. 2. 4 For mat of SD- 04 Sampl es

1. 4. 2. 4. 1 Sampl e Char act er i st i cs

1. 4. 2. 4. 2 Sampl e I ncor por at i on

1. 4. 2. 4. 3 Compar i son Sampl e

1. 4. 2. 5 For mat of SD- 05 Desi gn Dat a

1. 4. 2. 6 For mat of SD- 06 Test Repor t s

1. 4. 2. 7 For mat of SD- 07 Cer t i f i cat es

1. 4. 2. 8 For mat of SD- 08 Manuf act ur er ' s I nst r uct i ons

1. 4. 2. 8. 1 St andar ds

1. 4. 2. 9 For mat of SD- 09 Manuf act ur er ' s Fi el d Repor t s

1. 4. 2. 10 For mat of SD- 10 Oper at i on and Mai nt enance Dat a ( O&M)

1. 4. 2. 11 For mat of SD- 11 Cl oseout Submi t t al s

1. 4. 3 Sour ce Dr awi ngs f or Shop Dr awi ngs

1. 4. 3. 1 Sour ce Dr awi ngs

1. 4. 3. 2 Ter ms and Condi t i ons

1. 5 QUANTI TY OF SUBMI TTALS

1. 5. 1 Number of SD- 01 Pr econst r uct i on Submi t t al Copi es

1. 5. 2 Number of SD- 04 Sampl es

1. 6 I NFORMATI ON ONLY SUBMI TTALS

1. 7 PROJECT SUBMI TTAL REGI STER

1. 7. 1 Submi t t al Management

1. 7. 2 Pr econst r uct i on Use of Submi t t al Regi st er

1. 7. 3 Cont r act or Use of Submi t t al Regi st er

1. 7. 4 Appr ovi ng Aut hor i t y Use of Submi t t al Regi st er

1. 7. 5 Act i on Codes

1. 7. 6 Del i ver y of Copi es

SECTI ON 01 33 00 Page 1

1. 8 VARI ATI ONS

1. 8. 1 Consi der i ng Var i at i ons

1. 8. 2 Pr oposi ng Var i at i ons

1. 8. 3 War r ant i ng t hat Var i at i ons ar e Compat i bl e

1. 8. 4 Revi ew Schedul e Ext ensi on

1. 9 SCHEDULI NG

1. 10 GOVERNMENT APPROVI NG AUTHORI TY

1. 10. 1 Revi ew Not at i ons

1. 11 DI SAPPROVED SUBMI TTALS

1. 12 APPROVED SUBMI TTALS

1. 13 APPROVED SAMPLES

PART 2 PRODUCTS

PART 3 EXECUTI ON

ATTACHMENTS:

Appendi x A - Submi t t al Regi st er

- - End of Sect i on Tabl e of Cont ent s - -

SECTI ON 01 33 00 Page 2

SECTI ON 01 33 00

SUBMI TTAL PROCEDURES

08/18

PART 1 GENERAL

1. 1 DEFINITIONS

1. 1. 1 Submi t t al Descr i pt i ons ( SD)

Submi t t al r equi r ement s ar e speci f i ed i n t he t echni cal sect i ons. Exampl es and descr i pt i ons of submi t t al s i dent i f i ed by t he Submi t t al Descr i pt i on ( SD) number s and t i t l es f ol l ow:

SD- 01 Pr econst r uct i on Submi t t al s

Pr econst r uct i on Submi t t al s i ncl ude schedul es and a t abul ar l i s t of l ocat i ons, f eat ur es, and ot her per t i nent i nf or mat i on r egar di ng pr oduct s, mat er i al s, equi pment , or component s t o be used i n t he wor k.

Cer t i f i cat es Of I nsur ance

Sur et y Bonds

Li st Of Pr oposed Subcont r act or s

Li st Of Pr oposed Pr oduct s

Basel i ne Net wor k Anal ysi s Schedul e ( NAS)

Submi t t al Regi st er

Schedul e Of Pr i ces Or Ear ned Val ue Repor t

Wor k Pl an

Qual i t y Cont r ol ( QC) pl an

Envi r onment al Pr ot ect i on Pl an

SD- 02 Shop Dr awi ngs

Dr awi ngs, di agr ams and schedul es speci f i cal l y pr epar ed t o i l l ust r at e some por t i on of t he wor k.

Di agr ams and i nst r uct i ons f r om a manuf act ur er or f abr i cat or f or use i n pr oduci ng t he pr oduct and as ai ds t o t he Cont r act or f or i nt egr at i ng t he pr oduct or syst em i nt o t he pr oj ect .

Dr awi ngs pr epar ed by or f or t he Cont r act or t o show how mul t i pl e syst ems and i nt er di sci pl i nar y wor k wi l l be coor di nat ed.

SECTI ON 01 33 00 Page 3

SD- 03 Pr oduct Dat a

Cat al og cut s, i l l ust r at i ons, schedul es, di agr ams, per f or mance char t s, i nst r uct i ons and br ochur es i l l ust r at i ng s i ze, physi cal appear ance and ot her char act er i st i cs of mat er i al s, syst ems or equi pment f or some por t i on of t he wor k.

Sampl es of war r ant y l anguage when t he cont r act r equi r es ext ended pr oduct war r ant i es.

SD- 04 Sampl es

Fabr i cat ed or unf abr i cat ed physi cal exampl es of mat er i al s, equi pment or wor kmanshi p t hat i l l ust r at e f unct i onal and aest het i c char act er i st i cs of a mat er i al or pr oduct and est abl i sh st andar ds by whi ch t he wor k can be judged.

Col or sampl es f r om t he manuf act ur er ' s st andar d l i ne ( or cust om col or sampl es i f speci f i ed) t o be used i n sel ect i ng or appr ovi ng col or s f or t he pr oj ect .

Fi el d sampl es and mock- ups const r uct ed on t he pr oj ect s i t e est abl i sh st andar ds ensur i ng wor k can be j udged. I ncl udes assembl i es or por t i ons of assembl i es t hat ar e t o be i ncor por at ed i nt o t he pr oj ect and t hose t hat wi l l be r emoved at concl usi on of t he wor k.

SD- 05 Desi gn Dat a

Desi gn cal cul at i ons, mi x desi gns, anal yses or ot her dat a per t ai ni ng t o a par t of wor k.

SD- 06 Test Repor t s

Repor t s i gned by aut hor i zed of f i c i al of t est i ng l abor at or y t hat a mat er i al , pr oduct or syst em i dent i cal t o t he mat er i al , pr oduct or syst em t o be pr ovi ded has been t est ed i n accor d wi t h speci f i ed r equi r ement s. Unl ess speci f i ed i n anot her sect i on, t est i ng must have been wi t hi n t hr ee year s of dat e of cont r act awar d f or t he pr oj ect .

Repor t t hat i ncl udes f i ndi ngs of a t est r equi r ed t o be per f or med on an act ual por t i on of t he wor k or pr ot ot ype pr epar ed f or t he pr oj ect bef or e shi pment t o j ob s i t e.

Repor t t hat i ncl udes f i ndi ng of a t est made at t he j ob s i t e or on sampl e t aken f r om t he j ob s i t e, on por t i on of wor k dur i ng or af t er installation.

I nvest i gat i on r epor t s

Dai l y l ogs and checkl i st s

Fi nal accept ance t est and oper at i onal t est pr ocedur e

SD- 07 Cer t i f i cat es

St at ement s pr i nt ed on t he manuf act ur er ' s l et t er head and si gned by r esponsi bl e of f i c i al s of manuf act ur er of pr oduct , syst em or mat er i al at t est i ng t hat t he pr oduct , syst em, or mat er i al meet s speci f i cat i on

SECTI ON 01 33 00 Page 4 r equi r ement s. Must be dat ed af t er awar d of pr oj ect cont r act and cl ear l y name t he pr oj ect .

Document r equi r ed of Cont r act or , or of a manuf act ur er , suppl i er , i nst al l er or Subcont r act or t hr ough Cont r act or . The document pur pose i s t o f ur t her pr omot e t he or der l y pr ogr essi on of a por t i on of t he wor k by document i ng pr ocedur es, accept abi l i t y of met hods, or per sonnel qualifications.

Conf i ned space ent r y per mi t s

Text of post ed oper at i ng i nst r uct i ons

SD- 08 Manuf act ur er ' s I nst r uct i ons

Pr epr i nt ed mat er i al descr i bi ng i nst al l at i on of a pr oduct , syst em or mat er i al , i ncl udi ng speci al not i ces and ( SDS) concer ni ng i mpedances, hazar ds and saf et y pr ecaut i ons.

SD- 09 Manuf act ur er ' s Fi el d Repor t s

Document at i on of t he t est i ng and ver i f i cat i on act i ons t aken by manuf act ur er ' s r epr esent at i ve at t he j ob s i t e, i n t he v i c i ni t y of t he j ob s i t e, or on a sampl e t aken f r om t he j ob s i t e, on a por t i on of t he wor k, dur i ng or af t er i nst al l at i on, t o conf i r m compl i ance wi t h manuf act ur er ' s st andar ds or i nst r uct i ons. The document at i on must be s i gned by an aut hor i zed of f i c i al of a t est i ng l abor at or y or agency and st at e t he t est r esul t s; and i ndi cat e whet her t he mat er i al , pr oduct , or syst em has passed or f ai l ed t he t est .

Fact or y t est r epor t s.

SD- 10 Oper at i on and Mai nt enance Dat a

Dat a pr ovi ded by t he manuf act ur er , or t he syst em pr ovi der , i ncl udi ng manuf act ur er ' s hel p and pr oduct l i ne document at i on, necessar y t o mai nt ai n and i nst al l equi pment , f or oper at i ng and mai nt enance use by f aci l i t y per sonnel .

Dat a r equi r ed by oper at i ng and mai nt enance per sonnel f or t he saf e and ef f i c i ent oper at i on, mai nt enance and r epai r of t he i t em.

Dat a i ncor por at ed i n an oper at i ons and mai nt enance manual or cont r ol system.

SD- 11 Cl oseout Submi t t al s

Document at i on t o r ecor d compl i ance wi t h t echni cal or admi ni st r at i ve r equi r ement s or t o est abl i sh an admi ni st r at i ve mechani sm.

Submi t t al s r equi r ed f or Gui di ng Pr i nci pl e Val i dat i on ( GPV) or Thi r d Par t y Cer t i f i cat i on ( TPC) .

Speci al r equi r ement s necessar y t o pr oper l y c l ose out a const r uct i on cont r act . For exampl e, Recor d Dr awi ngs and as- bui l t dr awi ngs. Al so, submi t t al r equi r ement s necessar y t o pr oper l y c l ose out a maj or phase of const r uct i on on a mul t i - phase cont r act .

SECTI ON 01 33 00 Page 5

1. 1. 2 Appr ovi ng Aut hor i t y

Of f i ce or desi gnat ed per son aut hor i zed t o appr ove t he submi t t al .

1. 1. 3 Work

As used i n t hi s sect i on, on- si t e and of f - s i t e const r uct i on r equi r ed by cont r act document s, i ncl udi ng l abor necessar y t o pr oduce submi t t al s , const r uct i on, mat er i al s, pr oduct s, equi pment , and syst ems i ncor por at ed or t o be i ncor por at ed i n such const r uct i on. I n except i on, excl udes wor k t o pr oduce SD- 01 submi t t al s.

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e [ f or Cont r act or QC appr oval . ] [ f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . ] Submi t t he f ol l owi ng i n accor dance wi t h t hi s sect i on.

SD- 01 Pr econst r uct i on Submi t t al s

Submi t t al Regi st er ; G

1. 3 SUBMI TTAL CLASSI FI CATI ON

1. 3. 1 Gover nment Appr oved ( G)

Wi t hi n t he t er ms of t he Cont r act Cl ause SPECI FI CATI ONS AND DRAWI NGS FOR CONSTRUCTI ON, submi t t al s ar e consi der ed t o be " shop dr awi ngs. "

1. 3. 2 For I nf or mat i on Onl y

Submi t t al s not r equi r i ng Gover nment appr oval wi l l be f or i nf or mat i on onl y.

Wi t hi n t he t er ms of t he Cont r act Cl ause SPECI FI CATI ONS AND DRAWI NGS FOR CONSTRUCTI ON, t hey ar e not consi der ed t o be " shop dr awi ngs. "

1. 4 PREPARATION

1. 4. 1 Tr ansmi t t al For m

1. 4. 2 Submi t t al For mat

1. 4. 2. 1 For mat of SD- 01 Pr econst r uct i on Submi t t al s

When t he submi t t al i ncl udes a document t hat i s t o be used i n t he pr oj ect , or i s t o become par t of t he pr oj ect r ecor d, ot her t han as a submi t t al , do not appl y t he Cont r act or ' s appr oval st amp t o t he document i t sel f , but t o a separ at e sheet accompanyi ng t he document .

Pr ovi de dat a i n t he uni t of measur e used i n t he cont r act document s.

1. 4. 2. 2 For mat f or SD- 02 Shop Dr awi ngs

Pr ovi de shop dr awi ngs not l ess t han 8 1/ 2 by 11 i nches nor mor e t han 30 by 42 i nches, except f or f ul l - s i ze pat t er ns or t empl at es. Pr epar e dr awi ngs t o accur at e s i ze, wi t h scal e i ndi cat ed, unl ess anot her f or m i s r equi r ed.

Ensur e dr awi ngs ar e sui t abl e f or r epr oduct i on and of a qual i t y t o pr oduce cl ear , di st i nct l i nes and l et t er s, wi t h dar k l i nes on a whi t e backgr ound.

SECTI ON 01 33 00 Page 6

a. I ncl ude t he namepl at e dat a, s i ze, and capaci t y on dr awi ngs. Al so i ncl ude appl i cabl e f eder al , mi l i t ar y, i ndust r y, and t echni cal soci et y publ i cat i on r ef er ences.

b. Di mensi on dr awi ngs, except di agr ams and schemat i c dr awi ngs. Pr epar e dr awi ngs demonst r at i ng i nt er f ace wi t h ot her t r ades t o scal e. Use t he same uni t of measur e f or shop dr awi ngs as i ndi cat ed on t he cont r act dr awi ngs. I dent i f y mat er i al s and pr oduct s f or wor k shown.

1. 4. 2. 2. 1 Dr awi ng I dent i f i cat i on

I ncl ude on each dr awi ng t he dr awi ng t i t l e, number , dat e, and r evi s i on number s and dat es, i n addi t i on t o i nf or mat i on r equi r ed i n par agr aph

I DENTI FYI NG SUBMI TTALS.

Number dr awi ngs i n a l ogi cal sequence. Each dr awi ng i s t o bear t he number of t he submi t t al i n a uni f or m l ocat i on next t o t he t i t l e bl ock. Pl ace t he Gover nment cont r act number i n t he mar gi n, i mmedi at el y bel ow t he t i t l e bl ock, f or each dr awi ng.

Reser ve a bl ank space, no smal l er t han [ _____] i nches on t he r i ght - hand si de of each sheet f or t he Gover nment di sposi t i on st amp.

1. 4. 2. 3 For mat of SD- 03 Pr oduct Dat a

Pr esent pr oduct dat a submi t t al s f or each sect i on. I ncl ude a t abl e of cont ent s, l i s t i ng t he page and cat al og i t em number s f or pr oduct dat a.

I ndi cat e, by pr omi nent not at i on, each pr oduct t hat i s bei ng submi t t ed;

i ndi cat e t he speci f i cat i on sect i on number and par agr aph number t o whi ch i t pertains.

1. 4. 2. 3. 1 Pr oduct I nf or mat i on

Suppl ement pr oduct dat a wi t h mat er i al pr epar ed f or t he pr oj ect t o sat i sf y t he submi t t al r equi r ement s wher e pr oduct dat a does not exi st . I dent i f y t hi s mat er i al as devel oped speci f i cal l y f or t he pr oj ect , wi t h i nf or mat i on and f or mat as r equi r ed f or submi ssi on of SD- 07 Cer t i f i cat es.

Pr ovi de pr oduct dat a i n uni t s used i n t he Cont r act document s. Wher e pr oduct dat a ar e i ncl uded i n pr epr i nt ed cat al ogs wi t h anot her uni t , submi t t he di mensi ons i n cont r act document uni t s, on a separ at e sheet .

1. 4. 2. 3. 2 Standards

Wher e equi pment or mat er i al s ar e speci f i ed t o conf or m t o i ndust r y or t echni cal - soci et y r ef er ence st andar ds of such or gani zat i ons as t he Amer i can Nat i onal St andar ds I nst i t ut e ( ANSI ) , ASTM I nt er nat i onal ( ASTM) , Nat i onal El ect r i cal Manuf act ur er ' s Associ at i on ( NEMA) , Under wr i t er s Labor at or i es ( UL) , or Associ at i on of Edi son I l l umi nat i ng Compani es ( AEI C) , submi t pr oof of such compl i ance. The l abel or l i s t i ng by t he speci f i ed or gani zat i on wi l l be accept abl e evi dence of compl i ance. I n l i eu of t he l abel or l i s t i ng, submi t a cer t i f i cat e f r om an i ndependent t est i ng or gani zat i on, compet ent t o per f or m t est i ng, and appr oved by t he Cont r act i ng Of f i cer .

St at e on t he cer t i f i cat e t hat t he i t em has been t est ed i n accor dance wi t h t he speci f i ed or gani zat i on' s t est met hods and t hat t he i t em compl i es wi t h

SECTI ON 01 33 00 Page 7 t he speci f i ed or gani zat i on' s r ef er ence st andar d.

1. 4. 2. 3. 3 Dat a Submi ssi on

Col l ect r equi r ed dat a submi t t al s f or each speci f i c mat er i al , pr oduct , uni t of wor k, or syst em i nt o a s i ngl e submi t t al t hat i s mar ked f or choi ces, opt i ons, and por t i ons appl i cabl e t o t he submi t t al . Mar k each copy of t he pr oduct dat a i dent i cal l y . Par t i al submi t t al s wi l l [ not ] be accept ed f or expedi t i on of t he const r uct i on ef f or t .

Submi t t he manuf act ur er ' s i nst r uct i ons bef or e i nst al l at i on.

1. 4. 2. 4 For mat of SD- 04 Sampl es

1. 4. 2. 4. 1 Sampl e Char act er i st i cs

Fur ni sh sampl es i n t he f ol l owi ng s i zes, unl ess ot her wi se speci f i ed or unl ess t he manuf act ur er has pr epackaged sampl es of appr oxi mat el y t he same si ze as speci f i ed:

a. Sampl e of Equi pment or Devi ce: Ful l s i ze.

b. Sampl e of Mat er i al s Less Than 2 by 3 i nches: Bui l t up t o 8 1/ 2 by 11 inches.

c. Sampl e of Mat er i al s Exceedi ng 8 1/ 2 by 11 i nches: Cut down t o 8 1/ 2 by 11 i nches and adequat e t o i ndi cat e col or , t ext ur e, and mat er i al variations.

d. Sampl e of Li near Devi ces or Mat er i al s: 10 i nch l engt h or l engt h t o be suppl i ed, i f l ess t han 10 i nches. Exampl es of l i near devi ces or mat er i al s ar e condui t and handr ai l s.

e. Sampl e Vol ume of Nonsol i d Mat er i al s: Pi nt . Exampl es of nonsol i d mat er i al s ar e sand and pai nt .

f . Col or Sel ect i on Sampl es: 2 by 4 i nches. Wher e sampl es ar e speci f i ed f or sel ect i on of col or , f i ni sh, pat t er n, or t ext ur e, submi t t he f ul l set of avai l abl e choi ces f or t he mat er i al or pr oduct speci f i ed. Si zes and quant i t i es of sampl es ar e t o r epr esent t hei r r espect i ve st andar d unit.

g. Sampl e Panel : 4 by 4 f eet .

h. Sampl e I nst al l at i on: 100 squar e f eet .

1. 4. 2. 4. 2 Sampl e I ncor por at i on

Reusabl e Sampl es: I ncor por at e r et ur ned sampl es i nt o wor k onl y i f so speci f i ed or i ndi cat ed. I ncor por at ed sampl es ar e t o be i n undamaged condi t i on at t he t i me of use.

Recor di ng of Sampl e I nst al l at i on: Not e and pr eser ve t he not at i on of any ar ea const i t ut i ng a sampl e i nst al l at i on, but r emove t he not at i on at t he f i nal c l ean- up of t he pr oj ect .

1. 4. 2. 4. 3 Compar i son Sampl e

Sampl es Showi ng Range of Var i at i on: Wher e var i at i ons i n col or , f i ni sh, SECTI ON 01 33 00 Page 8 pat t er n, or t ext ur e ar e unavoi dabl e due t o nat ur e of t he mat er i al s, submi t set s of sampl es of not l ess t han t hr ee uni t s showi ng ext r emes and mi ddl e of r ange. Mar k each uni t t o descr i be i t s r el at i on t o t he r ange of t he variation.

When col or , t ext ur e, or pat t er n i s speci f i ed by nami ng a par t i cul ar manuf act ur er and st y l e, i ncl ude one sampl e of t hat manuf act ur er and st y l e, f or compar i son.

1. 4. 2. 5 For mat of SD- 05 Desi gn Dat a

Pr ovi de desi gn dat a and cer t i f i cat es on 8 1/ 2 by 11 i nch paper .

1. 4. 2. 6 For mat of SD- 06 Test Repor t s

By pr omi nent not at i on, i ndi cat e each r epor t i n t he submi t t al . I ndi cat e t he speci f i cat i on number and par agr aph number t o whi ch each r epor t per t ai ns.

1. 4. 2. 7 For mat of SD- 07 Cer t i f i cat es

Pr ovi de desi gn dat a and cer t i f i cat es on 8 1/ 2 by 11 i nch paper .

1. 4. 2. 8 For mat of SD- 08 Manuf act ur er ' s I nst r uct i ons

Pr esent manuf act ur er ' s i nst r uct i ons submi t t al s f or each sect i on. I ncl ude t he manuf act ur er ' s name, t r ade name, pl ace of manuf act ur e, and cat al og model or number on pr oduct dat a. Al so i ncl ude appl i cabl e f eder al , mi l i t ar y, i ndust r y, and t echni cal - soci et y publ i cat i on r ef er ences. I f suppl ement al i nf or mat i on i s needed t o c l ar i f y t he manuf act ur er ' s dat a, submi t i t as speci f i ed f or SD- 07 Cer t i f i cat es.

Submi t t he manuf act ur er ' s i nst r uct i ons bef or e i nst al l at i on.

1. 4. 2. 8. 1 Standards

Wher e equi pment or mat er i al s ar e speci f i ed t o conf or m t o i ndust r y or t echni cal - soci et y r ef er ence st andar ds of such or gani zat i ons as t he Amer i can Nat i onal St andar ds I nst i t ut e ( ANSI ) , ASTM I nt er nat i onal ( ASTM) , Nat i onal El ect r i cal Manuf act ur er ' s Associ at i on ( NEMA) , Under wr i t er s Labor at or i es ( UL) , or Associ at i on of Edi son I l l umi nat i ng Compani es ( AEI C) , submi t pr oof of such compl i ance. The l abel or l i s t i ng by t he speci f i ed or gani zat i on wi l l be accept abl e evi dence of compl i ance. I n l i eu of t he l abel or l i s t i ng, submi t a cer t i f i cat e f r om an i ndependent t est i ng or gani zat i on, compet ent t o per f or m t est i ng, and appr oved by t he Cont r act i ng Of f i cer .

St at e on t he cer t i f i cat e t hat t he i t em has been t est ed i n accor dance wi t h t he speci f i ed or gani zat i on' s t est met hods and t hat t he i t em compl i es wi t h t he speci f i ed or gani zat i on' s r ef er ence st andar d.

1. 4. 2. 9 For mat of SD- 09 Manuf act ur er ' s Fi el d Repor t s

By pr omi nent not at i on, i ndi cat e each r epor t i n t he submi t t al . I ndi cat e t he speci f i cat i on number and par agr aph number t o whi ch each r epor t per t ai ns.

1. 4. 2. 10 For mat of SD- 10 Oper at i on and Mai nt enance Dat a ( O&M)

Compl y wi t h t he r equi r ement s speci f i ed i n Sect i on 01 78 23 OPERATI ON AND MAI NTENANCE DATA f or O&M Dat a f or mat .

SECTI ON 01 33 00 Page 9

1. 4. 2. 11 For mat of SD- 11 Cl oseout Submi t t al s

When t he submi t t al i ncl udes a document t hat i s t o be used i n t he pr oj ect or i s t o become par t of t he pr oj ect r ecor d, ot her t han as a submi t t al , do not appl y t he Cont r act or ' s appr oval s t amp t o t he document i t sel f , but t o a separ at e sheet accompanyi ng t he document .

Pr ovi de dat a i n t he uni t of measur e used i n t he cont r act document s.

1. 4. 3 Sour ce Dr awi ngs f or Shop Dr awi ngs

1. 4. 3. 1 Sour ce Dr awi ngs

The ent i r e set of sour ce dr awi ng f i l es ( DWG) wi l l not be pr ovi ded t o t he Cont r act or . Request t he speci f i c Dr awi ng Number f or t he pr epar at i on of shop dr awi ngs. Onl y t hose dr awi ngs r equest ed t o pr epar e shop dr awi ngs wi l l be pr ovi ded. These dr awi ngs ar e pr ovi ded onl y af t er awar d.

1. 4. 3. 2 Ter ms and Condi t i ons

Dat a cont ai ned on t hese el ect r oni c f i l es must not be used f or any pur pose ot her t han as a conveni ence i n t he pr epar at i on of const r uct i on dat a f or t he r ef er enced pr oj ect . Any ot her use or r euse i s at t he sol e r i sk of t he Cont r act or and wi t hout l i abi l i t y or l egal exposur e t o t he Gover nment . The Cont r act or must make no c l ai m, and wai ves t o t he f ul l est ext ent per mi t t ed by l aw any c l ai m or cause of act i on of any nat ur e agai nst t he Gover nment , i t s agent s, or i t s subconsul t ant s t hat may ar i se out of or i n connect i on wi t h t he use of t hese el ect r oni c f i l es. The Cont r act or must , t o t he f ul l est ext ent per mi t t ed by l aw, i ndemni f y and hol d t he Gover nment har ml ess agai nst al l damages, l i abi l i t i es, or cost s, i ncl udi ng r easonabl e at t or ney' s f ees and def ense cost s, ar i s i ng out of or r esul t i ng f r om t he use of t hese el ect r oni c f i l es.

These el ect r oni c sour ce dr awi ng f i l es ar e not const r uct i on document s.

Di f f er ences may exi st bet ween t he sour ce dr awi ng f i l es and t he cor r espondi ng const r uct i on document s. The Gover nment makes no r epr esent at i on r egar di ng t he accur acy or compl et eness of t he el ect r oni c sour ce dr awi ng f i l es, nor does i t make r epr esent at i on t o t he compat i bi l i t y of t hese f i l es wi t h t he Cont r act or har dwar e or sof t war e. The Cont r act or i s r esponsi bl e f or det er mi ni ng i f any conf l i c t exi st s. I n t he event t hat a conf l i c t ar i ses bet ween t he s i gned and seal ed const r uct i on document s pr epar ed by t he Gover nment and t he f ur ni shed sour ce dr awi ng f i l es, t he s i gned and seal ed const r uct i on document s gover n. Use of t hese sour ce dr awi ng f i l es does not r el i eve t he Cont r act or of t he dut y t o f ul l y compl y wi t h t he cont r act document s, i ncl udi ng and wi t hout l i mi t at i on t he need t o check, conf i r m and coor di nat e t he wor k of al l cont r act or s f or t he pr oj ect .

I f t he Cont r act or uses, dupl i cat es or modi f i es t hese el ect r oni c sour ce dr awi ng f i l es f or use i n pr oduci ng const r uct i on dat a r el at ed t o t hi s cont r act , r emove al l pr evi ous i ndi cat i on of owner shi p ( seal s, l ogos, s i gnat ur es, i ni t i al s and dat es) .

1. 5 QUANTI TY OF SUBMI TTALS

1. 5. 1 Number of SD- 01 Pr econst r uct i on Submi t t al Copi es

Unl ess ot her wi se speci f i ed, submi t [ t wo] [ t hr ee] set s of admi ni st r at i ve submittals.

SECTI ON 01 33 00 Page 10

1. 5. 2 Number of SD- 04 Sampl es

a. Submi t [ t wo] [ _____] sampl es, or [ t wo] [ _____] set s of sampl es showi ng t he r ange of var i at i on, of each r equi r ed i t em. One appr oved sampl e or set of sampl es wi l l be r et ai ned by t he appr ovi ng aut hor i t y and one wi l l be r et ur ned t o t he Cont r act or .

b. Submi t one sampl e panel or pr ovi de one sampl e i nst al l at i on wher e di r ect ed. I ncl ude component s l i s t ed i n t he t echni cal sect i on or as directed.

c. Submi t one sampl e i nst al l at i on, wher e di r ect ed.

d. Submi t one sampl e of nonsol i d mat er i al s.

1. 6 I NFORMATI ON ONLY SUBMI TTALS

Submi t t al s wi t hout a " G" desi gnat i on must be cer t i f i ed by t he QC manager and submi t t ed t o t he Cont r act i ng Of f i cer f or i nf or mat i on- onl y. Appr oval of t he Cont r act i ng Of f i cer i s not r equi r ed on i nf or mat i on onl y submi t t al s.

The Cont r act i ng Of f i cer wi l l mar k " r ecei pt acknowl edged" on submi t t al s f or i nf or mat i on and wi l l r et ur n onl y t he t r ansmi t t al cover sheet t o t he Cont r act or . Nor mal l y, submi t t al s f or i nf or mat i on onl y wi l l not be r et ur ned. However , t he Gover nment r eser ves t he r i ght t o r et ur n unsat i sf act or y submi t t al s and r equi r e t he Cont r act or t o r esubmi t any i t em f ound not t o compl y wi t h t he cont r act . Thi s does not r el i eve t he Cont r act or f r om t he obl i gat i on t o f ur ni sh mat er i al conf or mi ng t o t he pl ans and speci f i cat i ons; wi l l not pr event t he Cont r act i ng Of f i cer f r om r equi r i ng r emoval and r epl acement of nonconf or mi ng mat er i al i ncor por at ed i n t he wor k;

and does not r el i eve t he Cont r act or of t he r equi r ement t o f ur ni sh sampl es f or t est i ng by t he Gover nment l abor at or y or f or check t est i ng by t he Gover nment i n t hose i nst ances wher e t he t echni cal speci f i cat i ons so pr escr i be.

1. 7 PROJECT SUBMI TTAL REGI STER

A sampl e Pr oj ect Submi t t al Regi st er showi ng i t ems of equi pment and mat er i al s f or when submi t t al s ar e r equi r ed by t he speci f i cat i ons i s pr ovi ded as " Appendi x A - Submi t t al Regi st er . "

1. 7. 1 Submi t t al Management

Pr epar e and mai nt ai n a submi t t al r egi st er , as t he wor k pr ogr esses. Do not change dat a t hat i s out put i n col umns ( c) , ( d) , ( e) , and ( f ) as del i ver ed by Gover nment ; r et ai n dat a t hat i s out put i n col umns ( a) , ( g) , ( h) , and ( i ) as appr oved. As an at t achment , pr ovi de a submi t t al r egi st er showi ng i t ems of equi pment and mat er i al s f or whi ch submi t t al s ar e r equi r ed by t he speci f i cat i ons. Thi s l i s t may not be al l - i ncl usi ve and addi t i onal submi t t al s may be r equi r ed.

Col umn ( c) : Li s t s speci f i cat i on sect i on i n whi ch submi t t al i s required.

Col umn ( d) : Li s t s each submi t t al descr i pt i on ( SD Number . and t ype, e. g. , SD- 02 Shop Dr awi ngs) r equi r ed i n each speci f i cat i on section.

Col umn ( e) : Li s t s one pr i nci pal par agr aph i n each speci f i cat i on sect i on wher e a mat er i al or pr oduct i s speci f i ed. Thi s l i s t i ng i s

SECTI ON 01 33 00 Page 11 onl y t o f aci l i t at e l ocat i ng submi t t ed r equi r ement s. Do not consi der ent r i es i n col umn ( e) as l i mi t i ng t he pr oj ect requirements.

Ther eaf t er , t he Cont r act or i s t o t r ack al l submi t t al s by mai nt ai ni ng a compl et e l i s t , i ncl udi ng compl et i on of al l dat a col umns and al l dat es on whi ch submi t t al s ar e r ecei ved by and r et ur ned by t he Gover nment .

1. 7. 2 Pr econst r uct i on Use of Submi t t al Regi st er

Submi t t he submi t t al r egi st er . I ncl ude t he QC pl an and t he pr oj ect schedul e. Ver i f y t hat al l submi t t al s r equi r ed f or t he pr oj ect ar e l i s t ed and add mi ssi ng submi t t al s. Coor di nat e and compl et e t he f ol l owi ng f i el ds on t he r egi st er submi t t ed wi t h t he QC pl an and t he pr oj ect schedul e:

Col umn ( a) Act i v i t y Number : Act i v i t y number f r om t he pr oj ect schedule.

Col umn ( g) Cont r act or Submi t Dat e: Schedul ed dat e f or t he appr ovi ng aut hor i t y t o r ecei ve submi t t al s.

Col umn ( h) Cont r act or Appr oval Dat e: Dat e t hat Cont r act or needs appr oval of submi t t al .

Col umn ( i ) Cont r act or Mat er i al : Dat e t hat Cont r act or needs mat er i al del i ver ed t o Cont r act or cont r ol .

1. 7. 3 Cont r act or Use of Submi t t al Regi st er

Updat e t he f ol l owi ng f i el ds wi t h each submi t t al t hr oughout t he cont r act .

Col umn ( b) Tr ansmi t t al Number : Li st of consecut i ve, Cont r act or - assi gned number s.

Col umn ( j ) Act i on Code ( k) : Dat e of act i on used t o r ecor d Cont r act or ' s r evi ew when f or war di ng submi t t al s t o QC.

Col umn ( l ) Dat e submi t t al t r ansmi t t ed.

Col umn ( q) Dat e appr oval was r ecei ved.

1. 7. 4 Appr ovi ng Aut hor i t y Use of Submi t t al Regi st er

Updat e t he f ol l owi ng f i el ds:

Col umn ( b) Tr ansmi t t al Number : Li st of consecut i ve, Cont r act or - assi gned number s.

Col umn ( l ) Dat e submi t t al was r ecei ved.

Col umn ( m) t hr ough ( p) Dat es of r evi ew act i ons.

Col umn ( q) Dat e of r et ur n t o Cont r act or .

1. 7. 5 Act i on Codes

1. 7. 6 Del i ver y of Copi es

Submi t an updat ed el ect r oni c copy of t he submi t t al r egi st er t o t he

SECTI ON 01 33 00 Page 12

Cont r act i ng Of f i cer wi t h each i nvoi ce r equest . Pr ovi de an updat ed Submi t t al Regi st er mont hl y r egar dl ess of whet her an i nvoi ce i s submi t t ed.

1. 8 VARIATIONS

Var i at i ons f r om cont r act r equi r ement s r equi r e Cont r act i ng Of f i cer appr oval pur suant t o cont r act Cl ause FAR 52. 236- 21 Speci f i cat i ons and Dr awi ngs f or Const r uct i on, and wi l l be consi der ed wher e advant ageous t o t he Gover nment .

1. 8. 1 Consi der i ng Var i at i ons

Di scussi on of var i at i ons wi t h t he Cont r act i ng Of f i cer bef or e submi ssi on wi l l hel p ensur e t hat f unct i onal and qual i t y r equi r ement s ar e met and mi ni mi ze r ej ect i ons and r esubmi t t al s. When cont empl at i ng a var i at i on t hat r esul t s i n l ower cost , consi der submi ssi on of t he var i at i on as a Val ue Engi neer i ng Change Pr oposal ( VECP) .

Speci f i cal l y poi nt out var i at i ons f r om cont r act r equi r ement s i n t r ansmi t t al l et t er s. Fai l ur e t o poi nt out var i at i ons may cause t he Gover nment t o r equi r e r ej ect i on and r emoval of such wor k at no addi t i onal cost t o t he Government.

1. 8. 2 Pr oposi ng Var i at i ons

When pr oposi ng var i at i on, del i ver a wr i t t en r equest t o t he Cont r act i ng Of f i cer , wi t h document at i on of t he nat ur e and f eat ur es of t he var i at i on and why t he var i at i on i s desi r abl e and benef i c i al t o Gover nment . I ncl ude t he DOR' s wr i t t en anal ysi s and appr oval . I f l ower cost i s a benef i t , al so i ncl ude an est i mat e of t he cost savi ngs. I n addi t i on t o document at i on r equi r ed f or var i at i on, i ncl ude t he submi t t al s r equi r ed f or t he i t em.

Cl ear l y mar k t he pr oposed var i at i on i n al l document at i on.

1. 8. 3 War r ant i ng t hat Var i at i ons ar e Compat i bl e

When del i ver i ng a var i at i on f or appr oval , t he Cont r act or war r ant s t hat t hi s cont r act has been r evi ewed t o est abl i sh t hat t he var i at i on, i f i ncor por at ed, wi l l be compat i bl e wi t h ot her el ement s of wor k.

1. 8. 4 Revi ew Schedul e Ext ensi on

I n addi t i on t o t he nor mal submi t t al r evi ew per i od, a per i od of [ 14] [ _____] days wi l l be al l owed f or t he Gover nment t o consi der submi t t al s wi t h variations.

1. 9 SCHEDULING

Schedul e and submi t concur r ent l y pr oduct dat a and shop dr awi ngs cover i ng component i t ems f or mi ng a syst em or i t ems t hat ar e i nt er r el at ed. Submi t per t i nent cer t i f i cat i ons at t he same t i me. No del ay damages or t i me ext ensi ons wi l l be al l owed f or t i me l ost i n l at e submi t t al s. [ Al l ow an addi t i onal [ _____] days f or r evi ew and appr oval of submi t t al s f or [ f ood ser vi ce equi pment ] [ and] [ r ef r i ger at i on and HVAC cont r ol syst ems] ] .

a. Coor di nat e schedul i ng, sequenci ng, pr epar i ng, and pr ocessi ng of submi t t al s wi t h per f or mance of wor k so t hat wor k wi l l not be del ayed by submi t t al pr ocessi ng. The Cont r act or i s r esponsi bl e f or addi t i onal t i me r equi r ed f or Gover nment r evi ews r esul t i ng f r om r equi r ed r esubmi t t al s. The r evi ew per i od f or each r esubmi t t al i s t he same as f or t he i ni t i al submi t t al .

SECTI ON 01 33 00 Page 13

b. Submi t t al s r equi r ed by t he cont r act document s ar e l i s t ed on t he submi t t al r egi st er . I f a submi t t al i s l i s t ed i n t he submi t t al r egi st er but does not per t ai n t o t he cont r act wor k, t he Cont r act or i s t o i nc l ude t he submi t t al i n t he r egi st er and annot at e i t " N/ A" wi t h a br i ef expl anat i on. Appr oval by t he Cont r act i ng Of f i cer does not r el i eve t he Cont r act or of suppl y i ng submi t t al s r equi r ed by t he cont r act document s but t hat have been omi t t ed f r om t he r egi st er or mar ked " N/ A. "

c. Resubmi t t he submi t t al r egi st er and annot at e i t mont hl y wi t h act ual submi ssi on and appr oval dat es. When al l i t ems on t he r egi st er have been f ul l y appr oved, no f ur t her r esubmi t t al i s r equi r ed.

Cont r act i ng Of f i cer r evi ew wi l l be compl et ed wi t hi n [ _____] days af t er t he dat e of submi ssi on.

1. 10 GOVERNMENT APPROVI NG AUTHORI TY

When t he appr ovi ng aut hor i t y i s t he Cont r act i ng Of f i cer , t he Gover nment will:

a. Not e t he dat e on whi ch t he submi t t al was r ecei ved.

b. Revi ew submi t t al s f or appr oval wi t hi n t he schedul i ng per i od speci f i ed and onl y f or conf or mance wi t h pr oj ect desi gn concept s and compl i ance wi t h cont r act document s.

c. I dent i f y r et ur ned submi t t al s wi t h one of t he act i ons def i ned i n par agr aph REVI EW NOTATI ONS and wi t h comment s and mar ki ngs appr opr i at e f or t he act i on i ndi cat ed.

Upon compl et i on of r evi ew of submi t t al s r equi r i ng Gover nment appr oval , st amp and dat e submi t t al s. [ _____] copi es of t he submi t t al wi l l be r et ai ned by t he Cont r act i ng Of f i cer and [ _____] copi es of t he submi t t al wi l l be r et ur ned t o t he Cont r act or .

1. 10. 1 Revi ew Not at i ons

Submi t t al s wi l l be r et ur ned t o t he Cont r act or wi t h t he f ol l owi ng not at i ons:

a. Submi t t al s mar ked " appr oved" or " accept ed" aut hor i ze pr oceedi ng wi t h t he wor k cover ed.

b. Submi t t al s mar ked " appr oved as not ed" or " appr oved, except as not ed, r esubmi t t al not r equi r ed, " aut hor i ze pr oceedi ng wi t h t he wor k cover ed pr ovi ded t hat t he Cont r act or t akes no except i on t o t he cor r ect i ons.

c. Submi t t al s mar ked " not appr oved, " " di sappr oved, " or " r evi se and r esubmi t " i ndi cat e i ncompl et e submi t t al or noncompl i ance wi t h t he cont r act r equi r ement s or desi gn concept . Resubmi t wi t h appr opr i at e changes. Do not pr oceed wi t h wor k f or t hi s i t em unt i l t he r esubmi t t al i s appr oved.

d. Submi t t al s mar ked " not r evi ewed" i ndi cat e t hat t he submi t t al has been pr evi ousl y r evi ewed and appr oved, i s not r equi r ed, does not have evi dence of bei ng r evi ewed and appr oved by Cont r act or , or i s not compl et e. A submi t t al mar ked " not r evi ewed" wi l l be r et ur ned wi t h an expl anat i on of t he r eason i t i s not r evi ewed. Resubmi t submi t t al s r et ur ned f or l ack of r evi ew by Cont r act or or f or bei ng i ncompl et e, wi t h appr opr i at e act i on, coor di nat i on, or change.

SECTI ON 01 33 00 Page 14

e. Submi t t al s mar ked " r ecei pt acknowl edged" i ndi cat e t hat submi t t al s have been r ecei ved by t he Gover nment . Thi s appl i es onl y t o " i nf or mat i on- onl y submi t t al s" as pr evi ousl y def i ned.

1. 11 DI SAPPROVED SUBMI TTALS

Make cor r ect i ons r equi r ed by t he Cont r act i ng Of f i cer . I f t he Cont r act or consi der s any cor r ect i on or not at i on on t he r et ur ned submi t t al s t o const i t ut e a change t o t he cont r act dr awi ngs or speci f i cat i ons, gi ve not i ce t o t he Cont r act i ng Of f i cer as r equi r ed under t he FAR cl ause t i t l ed CHANGES. The Cont r act or i s r esponsi bl e f or t he di mensi ons and desi gn of connect i on det ai l s and t he const r uct i on of wor k. Fai l ur e t o poi nt out var i at i ons may cause t he Gover nment t o r equi r e r ej ect i on and r emoval of such wor k at t he Cont r act or ' s expense.

I f changes ar e necessar y t o submi t t al s, make such r evi s i ons and r esubmi t i n accor dance wi t h t he pr ocedur es above. No i t em of wor k r equi r i ng a submi t t al change i s t o be accompl i shed unt i l t he changed submi t t al s ar e approved.

1. 12 APPROVED SUBMI TTALS

The Cont r act i ng Of f i cer ' s appr oval of submi t t al s i s not t o be const r ued as a compl et e check, and i ndi cat es onl y t hat

Appr oval or accept ance by t he Gover nment f or a submi t t al does not r el i eve t he Cont r act or of t he r esponsi bi l i t y f or meet i ng t he cont r act r equi r ement s or f or any er r or t hat may exi st , because under t he Qual i t y Cont r ol ( QC) r equi r ement s of t hi s cont r act , t he Cont r act or i s r esponsi bl e f or ensur i ng i nf or mat i on cont ai ned wi t h i n each submi t t al accur at el y conf or ms wi t h t he r equi r ement s of t he cont r act document s.

Af t er submi t t al s have been appr oved or accept ed by t he Cont r act i ng Of f i cer , no r esubmi t t al f or t he pur pose of subst i t ut i ng mat er i al s or equi pment wi l l be consi der ed unl ess accompani ed by an expl anat i on of why a subst i t ut i on i s necessary.

1. 13 APPROVED SAMPLES

Appr oval of a sampl e i s onl y f or t he char act er i st i cs or use named i n such appr oval and i s not be const r ued t o change or modi f y any cont r act r equi r ement s. Bef or e submi t t i ng sampl es, pr ovi de assur ance t hat t he mat er i al s or equi pment wi l l be avai l abl e i n quant i t i es r equi r ed i n t he pr oj ect . No change or subst i t ut i on wi l l be per mi t t ed af t er a sampl e has been appr oved.

Mat ch t he appr oved sampl es f or mat er i al s and equi pment i ncor por at ed i n t he wor k. I f r equest ed, appr oved sampl es, i ncl udi ng t hose t hat may be damaged i n t est i ng, wi l l be r et ur ned t o t he Cont r act or , at i t s expense, upon compl et i on of t he cont r act . Unappr oved sampl es wi l l al so be r et ur ned t o t he Cont r act or at i t s expense, i f so r equest ed.

Fai l ur e of any mat er i al s t o pass t he speci f i ed t est s wi l l be suf f i c i ent cause f or r ef usal t o consi der , under t hi s cont r act , any f ur t her sampl es of t he same br and or make as t hat mat er i al . The Gover nment r eser ves t he r i ght t o di sappr ove any mat er i al or equi pment t hat has pr evi ousl y pr oved unsat i sf act or y i n ser vi ce.

SECTI ON 01 33 00 Page 15

Sampl es of var i ous mat er i al s or equi pment del i ver ed on t he s i t e or i n pl ace may be t aken by t he Cont r act i ng Of f i cer f or t est i ng. Sampl es f ai l i ng t o meet cont r act r equi r ement s wi l l aut omat i cal l y voi d pr evi ous appr oval s.

Repl ace such mat er i al s or equi pment t o meet cont r act r equi r ement s.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTI ON

Not Used

- - End of Sect i on - -

SECTI ON 01 33 00 Page 16

SECTI ON TABLE OF CONTENTS

DI VI SI ON 01 - GENERAL REQUI REMENTS

SECTI ON 01 42 00

SOURCES FOR REFERENCE PUBLI CATI ONS

02/19

PART 1 GENERAL

1. 1 REFERENCES

1. 2 ORDERI NG I NFORMATI ON

PART 2 PRODUCTS

PART 3 EXECUTI ON

SECTI ON 01 42 00 Page 1

SECTI ON 01 42 00

SOURCES FOR REFERENCE PUBLI CATI ONS

02/19

PART 1 GENERAL

1. 1 REFERENCES

Var i ous publ i cat i ons ar e r ef er enced i n ot her sect i ons of t he speci f i cat i ons t o est abl i sh r equi r ement s f or t he wor k. These r ef er ences ar e i dent i f i ed i n each sect i on by document number , dat e and t i t l e. The document number used i n t he c i t at i on i s t he number assi gned by t he st andar ds pr oduci ng or gani zat i on ( e. g. ASTM B564 St andar d Speci f i cat i on f or Ni ckel Al l oy For gi ngs) . However , when t he st andar ds pr oduci ng or gani zat i on has not assi gned a number t o a document , an i dent i f y i ng number has been assi gned f or r ef er ence pur poses.

1. 2 ORDERI NG I NFORMATI ON

The addr esses of t he st andar ds publ i shi ng or gani zat i ons whose document s ar e r ef er enced i n ot her sect i ons of t hese speci f i cat i ons ar e l i s t ed bel ow, and i f t he sour ce of t he publ i cat i ons i s di f f er ent f r om t he addr ess of t he sponsor i ng or gani zat i on, t hat i nf or mat i on i s al so pr ovi ded.

ALUMI NUM ASSOCI ATI ON ( AA)

1400 Cr yst al Dr i ve Sui t e 430 Ar l i ngt on, VA 22202 Ph: 703- 358- 2960 E- Mai l : i nf o@al umi num. or g I nt er net : https://www.aluminum.org/

AMERI CAN ASSOCI ATI ON OF STATE HI GHWAY AND TRANSPORTATI ON OFFI CI ALS

(AASHTO)

444 Nor t h Capi t al St r eet , NW, Sui t e 249 Washi ngt on, DC 20001 Ph: 202- 624- 5800 Fax: 202- 624- 5806 E- Mai l : i nf o@aasht o. or g I nt er net : https://www.transportation.org/

AMERI CAN CONCRETE I NSTI TUTE ( ACI )

38800 Count r y Cl ub Dr i ve Far mi ngt on Hi l l s , MI 48331- 3439 Ph: 248- 848- 3700 Fax: 248- 848- 3701 I nt er net : https://www.concrete.org/

AMERI CAN I NSTI TUTE OF STEEL CONSTRUCTI ON ( AI SC)

130 East Randol ph, Sui t e 2000 Chi cago, I L 60601 Ph: 312- 670- 5444 Fax: 312- 670- 5403 St eel Sol ut i ons Cent er : 866- 275- 2472 E- mai l : sol ut i ons@ai sc. or g

SECTI ON 01 42 00 Page 2

I nt er net : https://www.aisc.org/

AMERI CAN NATI ONAL STANDARDS I NSTI TUTE ( ANSI )

1899 L St r eet , NW, 11t h Fl oor Washi ngt on, DC 20036 Ph: 202- 293- 8020 Fax: 202- 293- 9287 E- mai l : s t or emanager @ansi . or g I nt er net : https://www.ansi.org/

AMERI CAN PETROLEUM I NSTI TUTE ( API )

1220 L St r eet , NW Washi ngt on, DC 20005- 4070 Ph: 202- 682- 8000 I nt er net : https://www.api.org/

AMERI CAN SOCI ETY FOR NONDESTRUCTI VE TESTI NG ( ASNT)

P. O. Box 28518 1711 Ar l i ngat e Lane Col umbus, OH 43228- 0518 Ph: 800- 222- 2768 or 614- 274- 6003 Fax: 614- 274- 6899 E- mai l : t j ones@asnt . or g I nt er net : https://www.asnt.org/

AMERI CAN WATER WORKS ASSOCI ATI ON ( AWWA)

6666 W. Qui ncy Avenue Denver , CO 80235 USA Ph: 303- 794- 7711 or 800- 926- 7337 Fax: 303- 347- 0804 I nt er net : https://www.awwa.org/

AMERI CAN WELDI NG SOCI ETY ( AWS)

8669 NW 36 St r eet , #130 Mi ami , FL 33166- 6672 Ph: 800- 443- 9353 I nt er net : https://www.aws.org/

AMERI CAN WOOD PROTECTI ON ASSOCI ATI ON ( AWPA)

P. O. Box 361784 Bi r mi ngham, AL 35236- 1784 Ph: 205- 733- 4077 Fax: 205- 733- 4075 Internet: http://www.awpa.com

ASME I NTERNATI ONAL ( ASME)

Two Par k Avenue New Yor k, NY 10016- 5990 Ph: 800- 843- 2763 Fax: 973- 882- 1717 E- mai l : cust omer car e@asme. or g I nt er net : https://www.asme.org/

ASTM I NTERNATI ONAL ( ASTM)

100 Bar r Har bor Dr i ve, P. O. Box C700 West Conshohocken, PA 19428- 2959 Ph: 610- 832- 9500 Fax: 610- 832- 9555 E- mai l : ser vi ce@ast m. or g

SECTI ON 01 42 00 Page 3

I nt er net : https://www.astm.org/

ELECTRONI C I NDUSTRI ES ALLI ANCE ( EI A)

EI A has become par t of t he ELECTRONI C COMPONENTS I NDUSTRY

ASSOCI ATI ON ( ECI A)

HYDRAULI C I NSTI TUTE ( HI )

6 Campus Dr i ve, Fi r st Fl oor Nor t h Par si ppany, NJ 07054- 4405 Ph: 973- 267- 9700 Fax: 973- 267- 9055 Internet: http://www.pumps.org

I CC EVALUATI ON SERVI CE, I NC. ( I CC- ES)

3060 Sat ur n St r eet , Sui t e 100 Br ea, CA 92821 Ph: 800- 423- 6587 Fax: 562- 695- 4694 E- mai l : es@i cc- es. or g I nt er net : https://icc-es.org/

I LLUMI NATI NG ENGI NEERI NG SOCI ETY ( I ES)

120 Wal l St r eet , Fl oor 17 New Yor k, NY 10005- 4001 Ph: 212- 248- 5000 Fax: 212- 248- 5018 E- mai l : member shi p@i es. or g I nt er net : https://www.ies.org/

I NSTI TUTE OF ELECTRI CAL AND ELECTRONI CS ENGI NEERS ( I EEE)

445 and 501 Hoes Lane Pi scat away, NJ 08854- 4141 Ph: 732- 981- 0060 or 800- 701- 4333 Fax: 732- 981- 9667 E- mai l : onl i nesuppor t @i eee. or g I nt er net : https://www.ieee.org/

I NSULATED CABLE ENGI NEERS ASSOCI ATI ON ( I CEA)

P. O. Box 493 Mi ami t own, OH 45041- 9998 E- mai l : i nf o@i cea. net I nt er net : https://www.icea.net/

I NTERNATI ONAL CODE COUNCI L ( I CC)

500 New Jer sey Avenue, NW 6t h Fl oor , Washi ngt on, DC 20001 Ph: 800- 786- 4452 or 888- 422- 7233 Fax: 202- 783- 2348 E- mai l : or der @i ccsaf e. or g I nt er net : https://www.iccsafe.org/

I NTERNATI ONAL ELECTRI CAL TESTI NG ASSOCI ATI ON ( NETA)

3050 Ol d Cent r e Ave. Sui t e 101 Por t age, MI 49024 Ph: 269- 488- 6382 Fax: 269- 488- 6383 I nt er net : https://www.netaworld.org/

SECTI ON 01 42 00 Page 4

I NTERNATI ONAL ORGANI ZATI ON FOR STANDARDI ZATI ON ( I SO)

I SO Cent r al Secr et ar i at

BI BC I I

Chemi n de Bl andonnet 8 CP 401 - 1214 Ver ni er , Geneva Switzerland Ph: 41- 22- 749- 01- 11 E- mai l : cent r al @i so. ch I nt er net : https://www.iso.org

I PC - ASSOCI ATI ON CONNECTI NG ELECTRONI CS I NDUSTRI ES ( I PC)

3000 Lakesi de Dr i ve, Sui t e 105 N Bannockbur n, I L 60015 Ph: 847- 615- 7100 Fax: 847- 615- 7105 E- mai l : answer s@i pc. or g I nt er net : http://www.ipc.org

MANUFACTURERS STANDARDI ZATI ON SOCI ETY OF THE VALVE AND FI TTI NGS

I NDUSTRY ( MSS)

127 Par k St r eet , NE Vi enna, VA 22180- 4602 Ph: 703- 281- 6613 E- mai l : i nf o@msshq. or g I nt er net : http://msshq.org

MASTER PAI NTERS I NSTI TUTE ( MPI )

2800 I ngl et on Avenue Bur naby, BC CANADA V5C 6G7 Ph: 1- 888- 674- 8937 Fax: 1- 888- 211- 8708 E- mai l : i nf o@pai nt i nf o. com or t echser vi ces@mpi . net I nt er net : http://www.mpi.net/

NACE I NTERNATI ONAL ( NACE)

15835 Par k Ten Pl ace Houst on, TX 77084 Ph: 281- 228- 6200 Fax: 281- 228- 6300 E- mai l : f i r st ser vi ce@nace. or g I nt er net : https://www.nace.org

NATI ONAL ASSOCI ATI ON OF ARCHI TECTURAL METAL MANUFACTURERS ( NAAMM)

800 Roosevel t Road, Bl dg C, Sui t e 312 Gl en El l yn, I L 60137 Ph: 630- 942- 6591 Fax: 630- 790- 3095 E- mai l : i nf o@naamm. or g I nt er net : http://www.naamm.org

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

1300 Nor t h 17t h St r eet , Sui t e 900 Ar l i ngt on, VA 22209 Ph: 703- 841- 3200 I nt er net : https://www.nema.org

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

1 Bat t er ymar ch Par k Qui ncy, MA 02169- 7471

SECTI ON 01 42 00 Page 5

Ph: 800- 344- 3555…