B08_ATT 0013 - ECP R21K2013.pdf

ENGINEERING CHANGE PROPOSAL

(ECP)

1. DATE PREPARED

(DD-MMM-YYYY)

18-AUG-2021

2. PROCURING ACTIVITY NO. (PAN):

R21K2013 OMB No.

0704-0188

3. ECP NUMBER: R21K2013

The public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/PROCURING ACTIVITY

NUMBER LISTED IN ITEM 2 OF THIS FORM.

4. TITLE OF CHANGE: Addition of Mold Inhibitors to Wood Preservatives

5. CLASS OF ECP:

Major (Class I) Minor (Class II) Administrative

6. PRIORITY:

E - Emergency U - Urgent R - Routine

7. ECP TYPE:

P - Preliminary F - Formal

8. JUSTIFICATION CODE: B - Interface C - Compatibility D - Correction of Deficiency L - Logistics Support

O - Operational or Product Improvement P - Production Stoppage R - Cost Reduction S - Safety V - Value Engineering

9. DESCRIPTION OF CHANGE: see continuation page.

10. NEED FOR CHANGE: see continuation page.

11. MODEL/TYPE DESIGNATION: see continuation page

12. SYSTEM/CONFIGURATION ITEM NOMENCLATURE: see continuation page

13. AFFECTED ITEM NOMENCLATURE:

Wood Packing Material, Preservative Treated

14.a. OTHER EXTERNAL SYSTEM AFFECTED?

Yes No

b. IF BLOCK 14.a. IS YES, LIST OTHER SYSTEMS OR CONFIGURATION ITEMS AFFECTED:

see block 22 (contract information), continuation sheet for actual item applicability for PM MAS, CCS, CAS

15. ALL LOWER OR HIGHER

ITEMS AFFECTED

a. NOMENCLATURE:

N/A

b. PART NO.:

N/A

c. NSN:

N/A

16. DOCUMENTS AFFECTED (Add continuation page if necessary) d.

CURRENT

REVISION

e.

NOR

NO.

f. REVISED

DOCUMENT

ATTACHEDa. CAGE b. DOCUMENT NO. c. NOMENCLATURE

19200 13064136 Wood Packing Material, Preservative Treated B 1 C 19200 13060578 Preservative, Wood - 2 A 19200 13039166 Pallet Box for Cartridge, 40mm, Practice M781 A 3 B

17. BASELINE AFFECTED:

Functional Allocated Product

18. IN PRODUCTION:

Yes No

19. EFFECTIVITY (Lot No., Serial No., Date):

see continuation page

20. EFFECT ON DELIVERY SCHEDULE:

N/A 21.a. RECOMMEND RETROFIT TO EXISTING ASSETS? Yes No

b. IF BLOCK 21.a. IS YES, DESCRIBE RETROFIT

REQUIREMENTS: N/A

c. COST IMPACT FROM ECP? Yes No

d. IF 21.c. IS YES, DESCRIBE: see attached memo

22. CONTRACT a. CONTRACTOR: see continuation page b. CONTRACT NO./LINE ITEM: see continuation page

23. CONTRACTING OFFICER a. NAME:

see cont. page

b. TELEPHONE:

see cont. page

c. E-MAIL:

see continuation page

24. ORIGINATOR a. NAME (submitter): Patrick DeWald b. ADDRESS (Street, City, State, Zip Code:):

Building 455 Picatinny Arsenal, NJ 07806-5000

e. ECP ORIGINATOR

CAGE CODE:

19200

c. TELEPHONE: 973-724-2570

d. E-MAIL: Patrick.m.dewald.civ@mail.mil

f. SUBMITTING ACTIVITY:

FCDD-ACE-LP

g. NAME AND TITLE (Authorizing Official):

Patrick DeWald, Physical Scientist

h. AUTHORIZED SIGNATURE:

25. BELOW TO BE COMPLETED BY THE APPROVING ACTIVITY

a. RECOMMENDATIONS: Approval Disapproval Approval with Modification

b. NAME and TITLE:

Jeff Windham Chief, Small Caliber Systems Branch

c. SIGNATURE: d. DATE SIGNED (DD-MMM-YYYY):

26.a. DISPOSITION (Configuration Change Authority): Approval Disapproval Approval with Modification

b. NAME and TITLE:

Douglas C. Wong Configuration Management Authority

c. SIGNATURE: d. DATE SIGNED (DD-MMM-YYYY):

27. TO BE COMPLETED BY THE ACTIVITY ACCOMPLISHING REVISION UPON NEW REVISION RELEASE

a. NAME and TITLE: b. SIGNATURE: c. DATE NEW REVISION(S) RELEASED:

Microsoft Office WORD DD FORM 1692, AUG 2019 (US ARMY CCDC-Armament Center VERSION

Distribution Statement: A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

X

WINDHAM.JAMES.JE

FFERY.1228088672

Digitally signed by

WINDHAM.JAMES.JEFFERY.122808

Date: 2021.10.29 13:12:47 -05'00' 29-OCT-2021

WONG.DOUGLAS.C.12

28780134

Digitally signed by

WONG.DOUGLAS.C.1228780134

Date: 2021.12.19 15:15:14 -05'00'

17Dec2021

ENGINEERING CHANGE PROPOSAL (ECP)

(Continuation Page)

2. PAN: R21K2013 PAGE 2 OF

3. ECP NUMBER: R21K2013

BLOCK 9 CONTINUED:

This ECP adds moldicidal chemicals to preservative systems used to treat Ammunition Wooden Packaging Material (WPM). It is intended to supersede RFV 19K8002 . It includes redline drawing updates to 13064136B, a toxicity clearance and hazardous waste determination from US Army Public Health Center, a mold summary test report from USDA Forest Products Lab, and a marking test report from DEVCOM AC Packaging Division, as requested by two RFV CCBs (R19K8002 and R20K8002)

This ECP is for PM�s MAS CCS CAS. This ECP also contains some typographical and administrative corrections to the drawings, as well as some adjustments to active ingredient concentrations and tolerances.

BLOCK 10 CONTINUED:

Mold growth on Ammunition WPM�s has become a persistent issue for the munitions community. Because the preservatives used to treat WPMs are not inherently designed to prevent mold, they can be susceptible to mold growth when the WPMs are stored wet.

Two RFVs (R19K8002 and R20K8002) were approved in order to expedite implementation of mold inhibitors to current wood preservative treatment systems in order to improve protection for the WPMs, while full scale testing on all of the preservatives in Ammunition TDP�s were still being evaluated. All of those subsequent evaluations are now complete. This ECP finalizes the RFV changes and adjusts some of the mold inhibitor active ingredient concentrations and tolerances in order to prevent exceedance of the EPA limit.

BLOCK 11 CONTINUED:

PM MAS & CCS Conventional Ammunition Portfolio (e.g. small, medium, large cal, tank; mines, demos, flares, det cord, grenades, etc.)

BLOCK 12 CONTINUED:

MIL-DTL-15011: Hardwood Pallet MIL-DTL-2427: Nailed Wood Box MIL-DTL-46506: Wirebound Box ASTM D6880: Nailed Wood Box ASTM D6251: Cleated Panel Wood Box

DAC Basic Unitization Procedures

BLOCK 19 CONTINUED:

As determined by the Project Officer

DISTRIBUTION STATEMENT: A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

and packaging marking evaluation & 155mm paint compatibility test reports from DEVCOM AC Packaging Division, as requested by RFV R20K8002.

2. PAN: R21K2013 PAGE OF

3. ECP NUMBER: R21K2013

22. CONTRACT

INFORMATION

(CONTINUATION)

a. CONTRACTOR:

Olin Winchester � LCAAP and Second Source Contracts

GD-OTS � 120mm Tank Training Cartridge NGDS � 120 mm Tank Training Cartridge Northrop Grumman � SLAM (wirebound wood box, wood pallets) 5-6. Ensign Bickford � Det Cord (nailed wood box, wood pallet) & Sheet Explosives (wirebound wood box, wood pallet)

7. RTI Technologies, LLC � M700 Blasting Cap (wood pallet)

8. R. Stresau Laboratory, Inc. � M6/M7 Blasting Cap (wirebound wood box, wood pallet)

9. Mnemonics, Inc. � M17A1/M85A1 and M152 RAMS Remote Detonators (wirebound wood box, wood pallet)

10. Ultra Defense (UDC) Ltd. USA � MDI (wirebound wood box, nailed wood box, wood pallet)

11. Security Signals Inc. (SSI) � MDI (wirebound wood box, nailed wood box, wood pallet)

12. Kilgore � M206 IRCM & MJU-7A/B IRCM Flares (wirebound wood box, wood pallet)

13. Armtec Defense Technologies � XM20 Flare Decoy Countermeasure (nailed wood box, wood pallet)

14. Alloy Surfaces Company, Inc. � M211 Flare (wirebound wood box, wood pallet)

15. Safariland, LLC � M1116 Cartridge, 12-gauge shotgun, non-lethal: ER point round

16. Aerojet Ordnance Tennessee, Inc. (AOT) � M69 Practice Hand Grenade (nailed wood box per MIL-DTL-2427, 35� x 45.5� wood pallet)

17. Day & Zimmermann Inc. (DZI) � M67 Frag Hand Grenade (nailed wood box per MIL-DTL- 2427, 35� x 45.5� wood pallet)

18. Pine Bluff Arsenal � a GOGO facility � M18 & M83 Smoke Hand Grenades (nailed wood box per ASTM D6880, 40� x 48� pallet)

19. Pine Bluff Arsenal � a GOGO facility � M8 Smoke Pot (cleated panel wood box per ASTM D6251, 40� x 48�) 20-21. Amtec Corp � 40mm (wirebounds, pallet boxes)

1. W52P1J-19-D-0085 W52P1J-21-C-0016

2. W52P1J-17-C-0024

3. W52P1J-17-C-0025

4. W15QKN-20-D-0012

5. W52P1J-17-D-0001

6. W52P1J-17-D-0042

7. W52P1J-19-D-0086

8. W52P1J-16-D-0043

9. W15QKN-20-D-0012

W15QKN-18-D-0104

10. W15QKN-13-D-0077

11. W15QKN-20-C-0062

12. W52P1J-21-D-0010

13. W15QKN-18-9-1008

DOTC-18-01-INIT0580

14. W15QKN-21-D-0014

15. W15QKN-20-D-0005

16. W52P1J-19-C-0036

17. W52P1J-16-C-000

18. SOW

19. SOW

20. W52P1J-17-C-0051

21. W52P1J-16-C-0049

Distribution Statement A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

Contractor

13. Armtec Defense Technologies - M206 IRCM & MJU-7A/B IRCM Flares (wirebound wood box, wood pallet)

22. Armtec Defense Technologies - M839 Decoy Cartridges (wirebound wood box, wood pallet).

23. MDI contracts with Ensign-Bickford

24. Northrup Grumman 20, 25, 30mm

25. GD-OTS 20, 25, 30mm

26. Olin Corporation - Winchester Division (9mm, .38 Cal, .45 Cal)

27. Sig Sauer, Inc. (9mm weapons and ammunition)

28. Olin Corporation - Winchester Division (12 Gauge Shotshell (A011/A014/A017))

29. Safariland, LLC (12 Gauge Door Breacher (AA54))

30. Vista Outdoor Sales LLC (5.56mm Frangible (AA40)

Contract Number

13. W52P1J-21-D-0011

22. W52P1J-18-D-0099

23. W15QKN-21-D-0013, W15QKN-21-D-0041

24. W52P1J-18-D-0092

25. W52P1J-18-D-0093

26. W52P1J-16-D-0004

27. W15QKN-17-D-0016

28. W52P1J-17-D-0026

29. W15QKN-19-C-0047

30. W15QKN-17-D-0058

2. PAN: R21K2013 PAGE OF

3. ECP NUMBER: R21K2013

23. CONTRACTING OFFICER

and/or SPECIALISTS and/or DEPOT POC�s

(CONTINUATION)

a. NAME:

1. , 2-3. Anna E. Whitcomb 4,9. Rebecca Markell, Patricia Kleiman 5,8. Kristy Tierney, John Purcell, Jeremiah Chansler 6-7. Nathan Bowers, Joe Rivard, Chanie Yingst 10-11. Steven S. Ghazi, David M. Grimes

12. Benjamin Riessen

13. June Desalvio

14. Howard Kane

15. Evangelina Tillyros, Blake Isakson 16-17. Nate Tutor 18-19. Lauren Sikes (JMC) Amanda Heird (PBA) Sheila Peters 20-21. Julie Seaba

b. TELEPHONE:

(309) 782-6

(309) 782-

(309) 782-3836

(973) 724-3181

(973) 724-9591

(309) 782-6965

(309) 782-1303

(309) 782-7870

(309) 782-6953

(309) 582-4548

(973) 724-8141

(973) 724-9168

(309) 782-5225

(973) 724-3734

(973) 724-7476

(973) 724-6545

(309) 782-4972

(309) 782-3115

(870) 540-2935

(309) 782-0703

(309) 782-3317

c. E-MAIL:

@ .mil l .r. .civ@ .mil anna.e.whitcomb2.civ@ .mil rebecca.l.markell.civ@ .mil patricia.a.kleiman.civ@ .mi kristy.l.tierney.civ@ .mil john.a.purcell15.civ@ .mil jeremiah.n.chansler.civ@ .mil nathan.b.bowers.civ@ .mil lynn.j.rivard3.civ@ .mil chanie.k.yingst.civ@ .mil steven.s.ghazi.civ@ .mil david.m.grimes2.civ@ .mil benjamin.c.riessen.civ@ .mil June.a.desalvio.civ@ .mil howard.kane.civ@ .mil evangelina.c.tillyros.civ@ .mil blake.r.isakson.civ@ .mil nathanial.s.tutor.civ@ mil lauren.e.sikes.civ@ .mil amanda.d.heird.civ@ .mil sheila.k.peters2.civ@ .mil Julie.a.seaba.civ@ .mil

DISTRIBUTION STATEMENT: A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED

Contracting Officer and/or Specialist

13. Benjamin Riessen (309)782-5225 / benjamin.c.riessen.civ@army.mil

22. Bradley Grothus / bradley.j.grothus.civ@army.mil

23. Steven Ghazi (973)724-8141 / steven.s.ghazi.civ@army.mil

24, 25. Brittany Fleming (309)782-6814 / brittany.m.fleming5.civ@army.mil

26. Lana Graw (309)782-0502 / lana.r.graw.civ@army.mil Mark Stevens (309)782-2082 / mark.d.stevens.civ@army.mil

27. Jacalyn Dyda (973)724-3222 / jacalyn.b.dyda.civ@army.mil

28. Lana Graw (309)782-0502 / lana.r.graw.civ@army.mil Mark Stevens (309)782-2082 / mark.d.stevens.civ@army.mil

29. Laura Mackie (973)724-2293 / laura.a.mackie.civ@army.mil

30. Geoffrey Cramer (973)724-2917 / geoffrey.r.cramer2.civ@army.mil

Erin Donaldson / erin.m.donaldson2.civ@army.mil

2. PAN: R21K2014 PAGE OF

3. ECP NUMBER: R21K201

22. CONTRACT

INFORMATION

(CONTINUATION)

a. CONTRACTOR:

GD-OTS Canada (60/81mm HE) � pallet/pallet dunnage/wirebounds (as req)

DZI Kansas (60/81mm HE) � wirebounds & pallet/pallet dunnage

AO Iowa (60/81mm HE) � wirebounds & pallet/pallet dunnage

GD-OTS Canada (120mm HE/FRPC) � pallet/pallet dunnage

DZI Kansas (60/81mm FRPC) � pallet/pallet dunnage (filler assemblies)

Nammo Pocal (60mm FRPC) � pallet/pallet dunnage (filler assemblies)

D&Z (60mm FRPC M769) - pallet D&Z (60mm FRPC M769) - pallet DZI Kansas (60mm M1061 HE) � pallet/pallet dunnage

Pine Bluff Arsenal (All Mortar Smoke/Illum) � pallet/pallet dunnage

American Ordnance (MACS)

GD-OTS (MACS)

M82 Primers (155mm) M739A1 Fuze (155mm) McAAP (M1 105mm refurb) BGAD (M1 105mm refurb) AES- supplementary charges (wirebounds / systems contract) Spectra - supplementary charges (wirebounds / systems contract) KCARC - 155mm Pallet Choctaw - 105mm wood box Kaiyuh - 105mm wood box Nammo (M769) � pallet/pallet dunnage O&I, Inc. � 105mm wood box 155mm metal parts contract

b. CONTRACT NO./LINE ITEM:

1. W52P1J-17-D-0004

2. W52P1J-17-D-0003

3. W52P1J-17-D-0002

4. W15QKN-16-C-0017

W15QKN-19-C-0057

5. W52P1J-18-D-0001

6. W52P1J-18-D-0002

7. W52P1J-11-D-0020

8. W52P1J-11-D-0022

9. W15QKN-17-C-0112

10. N/A

11. W15QKN-19-D-0109

12. W15QKN-19-D-0110

13. W52P1J-18-D-0024

14. W15QKN-18-D-0084

15. N/A

16. N/A

17. W52P1J19D-0028

18. W52P1J19D-0029

19. W52P1J19D-0014

20. W52P1J19D-0008

21. W52P1J19D-0007

22. W52P1J-11-D-0021

23. W521PJ-20-F-0299

24. W15QKN-19-D-0084

23. CONTRACTING

OFFICER and/or

SPECIALISTS

and/or DEPOT POC�s

(CONTINUATION)

a. NAME:

1-3, 17-18, 23. Lisa Digney, 1-3. Amy Nissen

4. Mike Gomez 5-8,19, 22. Jessica Pearson George Lingris

9. Kim M. Potempa Niedosik

10. Amanda Heird 11-12. Jennifer Hughes, Jessica Gondela

13. Matthew Kopel

14. Jennifer M. Hughes

15. Ron Dusenberry

16. Ron Ody 17-18. Chet Jacks

19. David Baranowski 20-21. Jill Veloz

Katelyn Coon

23. Adam Geneva

24. Anthony Delicati

Christopher Bartow

b. TELEPHONE:

(309) 782-4946

(309) 782-5189

(973) 724-2368

(309) 782-4878

(309) 782-3855

(973) 724-3927

(870) 540-2935

(973) 724-4856

(973) 724-8424

(309) 782-7888

(973) 724-4856

(918) 420-7638

(859) 779-6620

(309) 782-4952

(309) 782-5839

(309) 782-2895

(309) 782-3309

(309) 782-3505

(973) 724-3586

(973) 724-5421

c. E-MAIL:

lisa.m.digney.civ@ .mil amy.l.nissen.civ@ .mil michael.j.gomez50.civ@ .mil jessica.l.pearson2.civ@ .mil george.r.lingris.civ@ .mil kim.m.potempaniedosik.civ@ .mil amanda.d.heird.civ@ .mil jennifer.m.hughes56.civ@ .mil jessica.m.gondela.civ@ mil matthew.j.kopel.civ@ .mil jennifer.m.hughes56.civ@ .mil ron.d.dusenberry.civ@ .mil ronald.e.ody.civ@ mil chet.a.jacks.civ@ .mil david.b.baranowski.civ@ .mil jill.c.veloz.civ@ .mil katelyn.m.coon.civ@ .mil adam.m.geneva.civ@ .mil anthony.j.delicati.civ@ .mil christopher.j.bartow.civ@ .mil

DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

19. Molly Lewis (309) 782-1837 molly.j.lewis4.civ@army.mil Christina Joniak (765) 860-4637 christina.l.joniak2.civ@army.mil

25. M116A1/M825A1 Metal Parts Contract, W52P1J-20-D-0016 Molly Lewis, (309)782-1837 / molly.j.lewis4.civ@army.mil

Anthony Aurillo (973) 724-2024 anthony.r.aurillo.civ@army.mil

Lisa Digney (309) 782-4946 lisa.m.digney.civ@army.mil Amy Nissen (309) 782-5189 amy.l.nissen.civ@army.mil

26. M795 Metal Parts contract W15QKN-15-D-0017 Jason Mackie, (309)724-3715, / jason.p.mackie.civ@army.mil Chris Bartow, (973) 724-5421, / christopher.j.bartow.civ@army

Jason Mackie (973)724-3715 jason.p.mackie.civ@army.mil

Microsoft Office WORD DD FORM 1695, AUG 2019 (US ARMY CCDC-Armament Center VERSION) DISTRIBUTION STATEMENT: A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

NOTICE OF REVISION (NOR) OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE

CONTRACT/PROCURING ACTIVITY NUMBER LISTED IN ITEM 22 OF THIS FORM.

1. DATE PREPARED (DD-MON-YYYY)

18-AUG-2021

2. PROCURING ACTIVITY NO. (PAN)

R21K2013

3. ECP NO.

R21K2013

4. NOR NO. 1 OF

5. ORIGINATOR

a. CAGE CODE 19200

b. TYPED NAME (First, Middle Initial, Last)

Patrick, M, DeWald

c. ADDRESS (Street, City, State, Zip Code):

FCDD-ACE-LP

Building 455 Picatinny Arsenal, NJ 07806-5000

d. TELEPHONE (Incl. Area Code)

973-724-2570

e. E-MAIL ADDRESS Patrick.m.dewald.civ@mail.mil

6. TITLE OF AFFECTED DOCUMENT:

Wood Packing Material, Preservative Treated

7. DOCUMENT CAGE CODE

19200

8. DOCUMENT NO.

13064136

9. REVISION 10. NOR SHEET

1 OF a. CURRENT

B

b. OTHER UNINCORPORATED NORs N/A

11. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIES

Hardwood Pallets, Wirebound Boxes, Wood Boxes, Wood Cleated Panel Board Boxes, Pallet Crates, DAC Unitization Procedures

12. DESCRIPTION OF REVISION

See DRAFT Rev C 13064136 drawing redline. This revision adds new chemicals to Wood Packaging Material (WPM) specifications and drawings governing wood preservation, establishes their concentration requirements and tolerances, and provides new marking designations. It also includes explanatory information about mold prevention, cites applicable American Wood Protection Association

(AWPA) standard methods, includes new requirements and verifications for mold prevention, has information pertaining to one mold inhibitor�s dropper reagent test for presence of inhibitor.

13. REMARKS/RATIONALE

Most of the wood preservatives contained on Drawing 13064136 are designed primarily for protection from wood rot fungi and insects, not so much mold fungi, because the wood is supposed to be seasoned during manufacture and then kept dry for its lifecycle (below 20% moisture content). Due to many different reasons, WPMs in production and in the wholesale stockpile often get wet, and then are not allowed to fully dry out. This creates an ideal environment for mold to grow, which can happen very quickly.

In order to help prevent incidents of mold on the ammunition wooden packaging material, DEVCOM AC has tested and qualified additional chemicals that can be added to the wood preservative treatment systems identified on Drawing 13064136 for enhanced protection. The new chemicals are compatible with the current systems and can simply be added to the preservative solution. See ECP attachments for further justification and explanation of the changes.

All type classification and corresponding use restrictions from Drawing 13064136 (e.g. paragraph 1.2, Table 1, and paragraph 6.3.15) shall still apply, even with the inclusion of mold inhibitors. The addition of moldicides per this ECP may allow for future reduction in certain active ingredient concentration requirements and / or classification changes, however the applicable durability, mold, and/or corrosion testing would need to be performed in order to adjust Army Drawings.

14. TO BE COMPLETED BY THE APPROVING ACTIVITY

a. (X one) (1) Existing document supplemented by this NOR may be used in manufacture.

(2) Revised document must be received before manufacturer may incorporate this change.

15.a. ACTIVITY AUTHORIZED TO APPROVE CHANGE

SFAE-AA-MAS

b. NAME (First, Middle Initial, Last)

Douglas, C, Wong

c. TITLE d. SIGNATURE e. DATE SIGNED

(DD-MON-YYYY)

16. THIS SECTION COMPLETED BY THE ACTIVITY ACCOMPLISHING REVISION UPON NEW REVISION RELEASE

a. NAME (First, Middle Initial, Last) b. TITLE c. REVISION COMPLETED (Signature): d. DATE SIGNED

(DD-MON-YYYY):

DISTRIBUTION STATEMENT:

NOTICE OF REVISION (NOR) OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE

CONTRACT/PROCURING ACTIVITY NUMBER LISTED IN ITEM 22 OF THIS FORM.

1. DATE PREPARED (DD-MON-YYYY)

18-AUG-2021

2. PROCURING ACTIVITY NO. (PAN)

R21K201

3. ECP NO.

R21K201

4. NOR NO. 1 OF

5. ORIGINATOR

a. CAGE CODE 19200

b. TYPED NAME (First, Middle Initial, Last)

Patrick, M, DeWald

c. ADDRESS (Street, City, State, Zip Code):

FCDD-ACE-LP

Building 455 Picatinny Arsenal, NJ 07806-5000

d. TELEPHONE (Incl. Area Code)

973-724-2570

e. E-MAIL ADDRESS Patrick.m.dewald.civ@mail.mil

6. TITLE OF AFFECTED DOCUMENT:

Wood Packing Material, Preservative Treated

7. DOCUMENT CAGE CODE

19200

8. DOCUMENT NO.

13064136

9. REVISION 10. NOR SHEET

OF a. CURRENT

B

b. OTHER UNINCORPORATED NORs N/A

11. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIES

Hardwood Pallets, Wirebound Boxes, Wood Boxes, 155mm Projectile Pallets, DAC Unitization Procedures

12. DESCRIPTION OF REVISION

See DRAFT Rev C 13064136 drawing redline. This revision adds new chemicals to Wood Packaging Material (WPM) specifications and drawings governing wood preservation, establishes their concentration requirements and tolerances, and provides new marking designations. It also includes explanatory information about mold prevention, cites applicable American Wood Protection Association (AWPA) standard methods, includes new requirements and verifications for mold prevention, has information pertaining to one mold inhibitor�s dropper reagent test for presence of inhibitor.

13. REMARKS/RATIONALE

To address USMC comments from RFV R20K8002:

Modification 1: All type classification and corresponding use restrictions from Drawing 13064136 (e.g. paragraph 1.2, Table 1, and paragraph 6.3.15) shall still apply, even with the inclusion of mold inhibitors. The addition of moldicides per this ECP may allow for future reduction in certain active ingredient concentration requirements and / or classification changes, however the applicable durability, mold, and/or corrosion testing would need to be performed in order to adjust Army Drawings.

Modification 2: Paragraph 6.3.18.5 and Figures 8-11 were added to Drawing 13064136C to address dropper reagent test methods and results for checking the treated wood for presence of DDAC (aka Quaternary Ammonium Compound) mold inhibitor. DDAC is the only mold inhibitor with a known, commercially available dropper test reagent.

Modifications 3-4: Competed as part of Modification C of RFV R20K8002. See completed RFV R20K8002 (ModC) for reference.

14. TO BE COMPLETED BY THE APPROVING ACTIVITY

a. (X one) (1) Existing document supplemented by this NOR may be used in manufacture.

(2) Revised document must be received before manufacturer may incorporate this change.

15.a. ACTIVITY AUTHORIZED TO APPROVE CHANGE b. NAME (First, Middle Initial, Last)

c. TITLE d. SIGNATURE e. DATE SIGNED

(DD-MON-YYYY)

16. THIS SECTION COMPLETED BY THE ACTIVITY ACCOMPLISHING REVISION UPON NEW REVISION RELEASE

a. NAME (First, Middle Initial, Last) b. TITLE c. REVISION COMPLETED (Signature): d. DATE SIGNED

Mod Update Distribution Statement per Controlled Unclassified Information (CUI) guidance. See marked up drawing.

THIS DRAWING FORMS PART OF ECP R21K2013, NOR 1.

end item Ammunition Wooden Packaging Material (WPM) dip treated in preservatives that are intended to provide protection from tactical and wholesale stockpile storage and distribution conditions. It does NOT apply to WPM associated with inter-plant or bulk explosive / propellant shipment and storage. See paragragh 6.3.21.

Distribution Statement A: Approved for public release; distribution is unlimited.

Date of determination: 31 JAN 2017, Office of determination: PROJECT MANAGER

FOR MANEUVER AMMUNITION SYSTEMS,

ATTN: SFAE-AA-MAS, PICATINNY ARSENAL,

NJ 07806-5000.

AWPA A37-17: Standard for determination of quaternary ammonium compounds in wood and wood treating solutions by potentiometric titration using sodium tetraphenylborate

AWPA A17-15:

Standard for determination of quaternary ammonium compounds in ACQ solutions.

AWPA A18-18:

Standard for determination of quaternary ammonium compounds in wood by 2-phase titration.

AWPA A20-17:

Standard method for chlorothalonil assay

A90-18: Standard method for determination of 3-iodo-2-propynyl butyl carbamate (IPBC) in treating solutions.

A94-18: Standard method for determination of IPBC/ PER in solution and wood using HPLC and solid-phase extraction.

A95-20: Standard method for determination of mold inhibitors MIT/CMIT and OIT in treating solutions by high performance liquid chromatography.

A30-18: Standard method for determination of 4.5 Dicholor-2-N-octyl-4- Isothiazolone-3-one (DCOI) in wood and solutions by high performance liquid chromatography

(HPLC)

Mold inhibitor additives (see paragraph 6.3.19) shall be incorporated to the dip treatment solution, at the active ingredient concentrations provided in TABLE I, and be determined by weight percent, not volume. Other...(additives may be used...)

and all additive(s)and TABLE I.

AND:

1.0% +/- 0.2% didecyl dimethyl ammonium chloride

AND:

2.7% +/- 0.3% didecyl dimethyl ammonium carbonate / bicarbonate

AND:

2.0% +/- 0.2% didecyl dimethyl ammonium chloride 0.35% +/- 0.05% 3-iodo-2-propynyl butyl carbamate 0.18% +/- 0.02% propiconazole

AND:

2.0% +/- 0.2% didecyl dimethyl ammonium chloride

OR

0.11% +/-0.02% 2-n-octyl-4-isothiazolin-3-one

OR

2.0% +/- 0.2% didecyl dimethyl ammonium carbonate / bicarbonate

AND:

2.0% +/- 0.2% didecyl dimethyl ammonium carbonate / bicarbonate

OR

0.36% +/-0.04% chlorothalonil and 0.06% +/- 0.01% 2-n-octyl-4-isothiazolin-3-one

AND:

2.7% +/-0.3% didecyl dimethyl ammonium carbonate / bicarbonate

OR

0.36% +/-0.04% chlorothalonil and 0.06% +/- 0.01% 2-n-octyl-4-isothiazolin-3-one

OR

0.11% +/-0.02% 2-n-octyl-4-isothiazolin-3-one

OR

0.36% +/-0.04% chlorothalonil of the Dip Treatment Solutions to be Applied to the Wood and mold inhibitor additive(s)

3.3.9. Freedom of Mold. The WPM shall be free of any visible mold fungi.

See paragraph 6.3.19 for notes on mold prevention.

+ Didecyl Dimethyl Ammonium Chloride

+ Didecyl Dimethyl Ammonium Carbonate / Bicarbonate

+ Didecyl Dimethyl Ammonium Chloride and PG4 Propiconazole with 3-Iodo-2-Propynyl Butyl Carbamate

+ Didecyl Dimethyl Ammonium Carbonate / Bicarbonate PE+ + Chlorothalonil with 2-n-octyl-4-isothiazolin-3-one PE1

+ Didecyl Dimethyl Ammonium Carbonate / Bicarbonate PF+ + Chlorothalonil with 2-n-octyl-4-isothiazolin-3-one PF1 + 2-n-octyl-4-isothiazolin-3-one PF2 + Chlorothalonil PF3

+ Didecyl Dimethyl Ammonium Chloride PH+ + 2-n-octyl-4-isothiazolin-3-one PH1 + Didecyl Dimethyl Ammonium Carbonate / Bicarbonate PH2

3.3.9 Freedom of Mold X 4.4.16 X X

Freedom of mold 1 3.3.9 4.4.16

Freedom of mold 4.4.16 3.3.9 4.4.16 Major or equivalent test

Didecyl Dimethyl Ammonium Chloride / Carbonate A17, A18 or A37 Chlorothalonil A20 2-n-octyl-4-isothiazolin-3-one A30 or A95 3-iodo-2-propynyl butyl carbamate A90 or A94

When mold inhibitors are added to the preservative treatment solution, verify by test that the active ingredient's composition and concentration complies to the product's EPA Label.

or mold inhibitor's active ingredients composition and concentration do not match the product's EPA label.

(see 6.3.20) and any additive(s) are and any additives

4.4.16 Freedom of mold. At a frequency of no less than once per inspection lot, the preservative treated material shall be examined for freedom of visible mold. The inspection lot shall be rejected if the treated material is not free of visible mold fungi.

Deleted and in the Defense Technical Information Center (DTIC).

Note that only the "DDAC" type of mold inhibitor additions have a spot check indicator. This is why process controls and monitoring the treaters dip tank for active ingredient concentrations in accordance with Table 1 are very important.

DDAC Quaternary Ammonium Chloride/Carbonate (QAC) Indicator

Note that Zinc Naphthenate is a previously used preservative that is no longer used in ongoing production, but may be found in fielded WPM. Also, (note...)

6.3.18.5 Presence of Didecyl Dimethyl Ammonium Chloride / Carbonate (DDAC) (aka Quaternary Ammonium Compound - QAC). Ready to Use QAC indicators are usually available online. Lamotte Chemical Products Company Inc., Chestertown, MD is a potential supplier. QAC indicator solution (product code 6413) is ready to use, diluted in water to 0.1% methyl orange and 0.1% bromophenol blue concentrations. When applied to wood, a color change from yellow to green as seen in Figures 8-10 is indicative of DDAC treatment. Note that the QAC indicator does not work well if the WPM has been exposed to rain and it only tests for presence of the DDAC mold inhibitor, not concentration. WPM's in the field that may have been exposed to rain are best tested on an inner part of the wood. QAC indicators are not useful on PC (13060578-2), PG (13060578-6), and PH (13060758-7) treated wood, due to the color change imparted onto the wood by the primary preservative (stains the WPM dark green) and on PF (13060578-5) treated wood, due to the possibility of false positives for that preservative system.

6.3.19 Mold Prevention and the Addition of Mold Inhibitors to Army Wood Preservative Treatment Systems.

The most effective way to keep mold from growing on WPM is by keeping the wood dry: below 20% moisture content.

However, sometimes munitions Wooden Packaging Materials (WPM's) are exposed to precipitation and/or stored in conditions of high humidity. For these reasons, the Army identified moldicidal additives that may be helpful in suppressing mold growth, and updated this drawing accordingly. Even with these moldicidal additives, emphasis should be kept on keeping the WPM dry. If the wood does get wet, ammunition unit loads should be depalletized, if necessary, and allowed to dry out. The Army recommends wearing impervious gloves while handling preservative treated wood, with and without moldicides. Wood treated in accordance to this drawing does not need to be treated as HAZMAT, however re-use of treated materials is always encouraged, and disposal via incineration with proper pollution control mechanisms is preferred.

Burn pits are not recommended. All waste shall be disposed/recycled/reclaimed in accordance with applicable federal, state, and local environmental control regulations. Some of the mold inhibitor active ingredient concentration ranges on this drawing had to be adjusted downward slightly to prevent exceeding the EPA limit. Treaters should always wear Personal Protective Equipment (PPE) and follow the manufacturer's Safety Data Sheet (SDS) and EPA label.

Figure 8. QAC Indicator results on PD and PD+ (13060578-3) treated red oak.

Figure 9. QAC Indicator results on PD and PD+ (13060578-3) treated southern yellow pine.

6.3.19.1. Preservative suppliers typically sell concentrated formulations of mold inhibiting preservatives, similar to how the primary preservatives of 13060578 are normally procured. Also similar to the primary preservatives, WPM manufacturers and dip treaters need to dilute the concentrated formulations of the mold inhibitors to meet the active ingredient concentrations provided in TABLE I of this drawing. RTU formulations that include additives are acceptable, as long as they comply to TABLE I. Commercially available formulations that have been tested and qualified by the USG are identified in a Toxicity Clearance Memorandum, To: US Army Combat Capability Development Command, Armament Center, Packaging Division (DEVCOM-AC) From: US Army Public Health Center (MEDCOM-PHC), Toxicology Directorate, Dated: 11 June 2021, Subject: Toxicity Clearance for Additional Wood Preservative Treatments for Ammunition Pallets and Boxes, and can be acquired from the DEVCOM-AC Packaging Division or the MEDCOM-PHC Toxicology Directorate, upon request.

Note: no color change has been observed due to the addition of mold inhibitors identified on this drawing.

Figure 10. QAC Indicator results on PE+ and PE (13060578-4) treated wood.

6.3.20. Proposed equivalent test methods alternative to the AWPAs listed in TABLE VI need to be submitted to the USG for approval, prior to use.

6.3.21 Propellant Advisory Statement - AVOID THE USE OF ANY PRESERVATIVE TREATED WOOD PACKAGING MATERIAL (WPM) in combination with INTERPLANT, BULK EXPLOSIVE / PROPELLANT or Interim Hazard Classification (IHC) material shipment or storage.

NOTICE OF REVISION (NOR) OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE

CONTRACT/PROCURING ACTIVITY NUMBER LISTED IN ITEM 22 OF THIS FORM.

1. DATE PREPARED (DD-MON-YYYY)

18-AUG-2021

2. PROCURING ACTIVITY NO. (PAN)

R21K2013

3. ECP NO.

R21K2013

4. NOR NO. 2 OF

5. ORIGINATOR

a. CAGE CODE 19200

b. TYPED NAME (First, Middle Initial, Last)

Patrick, M, DeWald

c. ADDRESS (Street, City, State, Zip Code):

FCDD-ACE-LP

Building 455 Picatinny Arsenal, NJ 07806-5000

d. TELEPHONE (Incl. Area Code)

973-724-2570

e. E-MAIL ADDRESS Patrick.m.dewald.civ@mail.mil

6. TITLE OF AFFECTED DOCUMENT:

Preservative, Wood

7. DOCUMENT CAGE CODE

19200

8. DOCUMENT NO.

13060578

9. REVISION 10. NOR SHEET

1 OF 1a. CURRENT

b. OTHER UNINCORPORATED NORs N/A

11. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIES

Hardwood Pallets, Wirebound Boxes, Wood Boxes, Wood Cleated Panel Board Boxes, Pallet Boxes, DAC Unitization Procedures

12. DESCRIPTION OF REVISION

See DRAFT Revision A 13060578. This ECP updates contact info for wood preservative suppliers, corrects a typographical error in paragraph 8.1.6, updates Armament Centers organization name.

13. REMARKS/RATIONALE

The preservative formulations on this drawing have been tested and qualified for durability (i.e. efficacy against decay fungi and termites), but not for mold fungi. Recent tests that justify adding moldicides to preservative formulations are addressed in NOR 1 of this ECP. NOR 2 simply makes administrative updates. Technical updates are found in NOR 1.

All of the Type Classifications contained on this drawing (far right column of the Approved Sources of Supply Table) shall still apply.

The addition of moldicides to Drawing 13064136 per this ECP may allow for future reduction in certain active ingredient concentration requirements and / or classification changes, however the applicable durability, mold, and/or corrosion testing would need to be performed in order to adjust Army Drawings.

14. TO BE COMPLETED BY THE APPROVING ACTIVITY

a. (X one) (1) Existing document supplemented by this NOR may be used in manufacture.

(2) Revised document must be received before manufacturer may incorporate this change.

15.a. ACTIVITY AUTHORIZED TO APPROVE CHANGE

SFAE-AA-MAS-SETI

b. NAME (First, Middle Initial, Last)

Douglas, C, Wong

c. TITLE d. SIGNATURE e. DATE SIGNED

16. THIS SECTION COMPLETED BY THE ACTIVITY ACCOMPLISHING REVISION UPON NEW REVISION RELEASE

a. NAME (First, Middle Initial, Last) b. TITLE c. REVISION COMPLETED (Signature): d. DATE SIGNED

(DD-MON-YYYY):

Update Distribution Statement per Controlled Unclassified Information (CUI) guidance. See marked up drawing.Mod

(DD-MON-YYYY)

Lonza Wood Protection 1579 Koppers Rd Conley, GA 30288

(404) 362-3970

(800) 238-2523

(800) 238-2523

THIS DRAWING FORMS PART OF ECP R21K2013, NOR 2.

Distribution Statement A: Approved for public release; distribution is unlimited.

Date of determination: 05 Nov 2015, Office of determination: PROJECT MANAGER

FOR MANEUVER AMMUNITION SYSTEMS,

X

NOTICE OF REVISION (NOR) OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 2 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS. RETURN COMPLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE

CONTRACT/PROCURING ACTIVITY NUMBER LISTED IN ITEM 22 OF THIS FORM.

1. DATE PREPARED (DD-MON-YYYY)

18-AUG-2021

2. PROCURING ACTIVITY NO. (PAN)

R21K2013

3. ECP NO.

R21K2013

4. NOR NO. 3 OF

5. ORIGINATOR

a. CAGE CODE 19200

b. TYPED NAME (First, Middle Initial, Last)

Patrick, M, DeWald

c. ADDRESS (Street, City, State, Zip Code):

FCDD-ACE-LP

Building 455 Picatinny Arsenal, NJ 07806-5000

d. TELEPHONE (Incl. Area Code)

973-724-2570

e. E-MAIL ADDRESS Patrick.m.dewald.civ@mail.mil

6. TITLE OF AFFECTED DOCUMENT:

Pallet Box for Cartridge, 40mm, Practice M781

7. DOCUMENT CAGE CODE

19200

8. DOCUMENT NO.

13039166

9. REVISION 10. NOR SHEET

1 OF 1a. CURRENT

A

b. OTHER UNINCORPORATED NORs N/A

11. CONFIGURATION ITEM (OR SYSTEM) TO WHICH ECP APPLIES

Clip Lock Pallet Boxes

12. DESCRIPTION OF REVISION

See DRAFT Revision B 13039166 red lines.

13. REMARKS/RATIONALE

This ECP brings preservative requirements and verifications in line with other forms of WPM managed by PM-MAS, DEVCOM AC, and much of the JPEO A&A Portfolio (PMs CCS & CAS).

All type classification and corresponding use restrictions from Army Drawings 13064136, 13060578, and 13039166 shall still apply, even with the inclusion of mold inhibitors. The addition of moldicides per this ECP may allow for future reduction in certain active ingredient concentration requirements and / or classification changes, however the applicable durability, mold, and/or corrosion testing would need to be performed in order to adjust Army Drawings.

14. TO BE COMPLETED BY THE APPROVING ACTIVITY

a. (X one) (1) Existing document supplemented by this NOR may be used in manufacture.

(2) Revised document must be received before manufacturer may incorporate this change.

15.a. ACTIVITY AUTHORIZED TO APPROVE CHANGE

SFAE-AA-MAS-SETI

b. NAME (First, Middle Initial, Last)

Douglas, C, Wong

c. TITLE d. SIGNATURE e. DATE SIGNED

16. THIS SECTION COMPLETED BY THE ACTIVITY ACCOMPLISHING REVISION UPON NEW REVISION RELEASE

a. NAME (First, Middle Initial, Last) b. TITLE c. REVISION COMPLETED (Signature): d. DATE SIGNED

Update Distribution Statement per Controlled Unclassified Information (CUI) guidance. See marked up drawing.Mod

Wood used in the construction of the pallet box shall be treated with preservative 13060578, Type I or III, in accordance with 13064136. The most current revision of both drawings shall be used.

THIS DRAWING FORMS PART OF ECP R21K2013, NOR 3.

Distribution Statement A: Approved for public release; distribution is unlimited.

Date of determination: 24 DEC 2013, Office of determination: PROJECT MANAGER

FOR MANEUVER AMMUNITION SYSTEMS,