Attachment_0011_DS000515_FW_P&M_Wirebound.pdf

F

E

D c

B

A

DRAWING SIZE F 8 7

NOTES:-

1 - APPLICABLE STANDARDS/SPECIFICATIONS:

A. MIL-STD-1 OOE

B. ANSI Y14.5M-1982

C. SPEC MIL-A-25SO

(j) MATERIAL: INK, STENCIL, BLACK NO. 37038, TYPE II, Ill OR IV, SPEC A-A- 208.

@ DELETED BY ECP R 1 SK2028.

@ IN ADDITION TO THE QUANTITY REQUIRED, ADDITIONAL

SEPARATORS OR FILLERS MAY BE REQUIRED FOR TIGHT PACK.

@ MATERIAL: SEPARATOR, FILLER, SHEET FORM, SPEC MIL-PRF-50449.

6 5 4 3 2

LTR

REVISIONS

DESCRIPTION

PRODUCT BASELINE

ERR R1K2040

A NOR R15K2028 151217

PACKING INSTRUCTIONS

P1 - ALL MATERIALS SHALL BE THOROUGHLY DRY AT TIME OF

PACKING. MOISTURE CONTENT SHALL BE NO MORE THAN

9% MAXIMUM.

DATE (YR MO DA) APPROVED

010212 HJS

151218 KMC

@ MATERIAL: PLASTIC BOARD, TYPE II, BASIC WEIGHT 1 65 LBS/1000 SQ. FT.,

SPEC MIL-P-83668, SEE NOTES 9 AND 10.

P2- PACK TWO M2A 1 AMMUNITION BOXES, LOADED WITH

200 M82 PRIMERS DWG NO. 12977516 REF, WIDTHWISE

IN THE WI REBOUND BOX DWG NO. 75S334 7 REF. PLACE

TWO SEPARATORS BETWEEN THE TWO M2A1 BOXES SO

THAT THE SEPARATORS PROTRUDE ABOVE THE M2A1 BOX

COVERS. ADDITIONAL SEPARATORS WILL BE USED AS

REQUIRED FOR A TIGHT PACK. FOR ALTERNATIVE, SEE

PACKING INSTRUCTION P3 OR P4.

\j) MATERIAL: CUSHIONING MATERIAL, PACKAGING, GRADE A, TYPE I, SPEC A-A-59136, SEE NOTE 9.

@ MATERIAL REQUIRED ONLY IF ALTERNATIVE PACKAGING INSTRUCTION

PS IS APPLIED.

9- COLOR SHALL BE APPROXIMATELY FOREST GREEN NO. 34079

OF FED-STD-595.

@ FLUTES SHALL RUN PERPENDICULAR TO THE LONGEST DIMENSION.

{]) TOTAL WEIGHT INCLUDES PRIMER M82 IN ENVELOPES, EMPTY

WIREBOUND BOX WEIGHT (APPROX. 19.35 LBS.), AND COMBINED

WEIGHT OF FIBERBOARD BOXES, SUPPORTS AND M2A 1 BOXES

(APPROX. 1 4.38 LBS).

Q MATERIAL REQUIRED ONLY IF ALTERNATIVE PACKAGING INSTRUCTION

P4 IS APPLIED.

PACKAGING COMPONENTS

1 - BOX, WI REBOUND- 75S3347

2- BOX, METAL, AMMUNITION, M2A 1, PACKED

AND MARKED- 12977516

1- SEAL, METALLIC- 8794342-4 OR -6

2- SEPARATOR-12977S15-1

11 1/4 - 1/8 x 7 3/8 - 1/8

2- FILLER-12977s1s-2

11 1/4 - 1/8 x 7 3/8 - 1/8

CUSHION: 12977515-3

11 1/4 - 1/8 XS - 1/8 X 1/2 + 1/16 THICK

(J;@

SMCAR FORM 69, 1 DEC 87(TEMP) REPLACES SMCAR FORM 69, 1 JUL 87(TEMP)

WHICH MAY BE USED UNTIL EXHAUSTED

M2~

~2-BOX. AMMUNITION, M2AI

PACKED AND MARKED

12977S1 6 REF

M3

P3- AS AN ALTERNATIVE TO P2, PLACE TWO FILLERS

DWG NO. 12977515-1 REF BETWEEN THE TWO M2A1

AMMUNITION BOXES SO THAT THE FILLERS PROTRUDE ABOVE

THE M2A 1 AMMUNITION BOX COVERS AND THE FLUTES IN

THE CORRUGATION RUN IN THE VERTICAL AXIS.

P4- AS AN ALTERNATIVE TO P2, PLACE ONE CUSHION

DWG NO. 12977515-2 REF BETWEEN THE TWO M2A 1

AMMUNITION BOXES IN THE SPACE BELOW THE M2A 1

AMMUNITION BOX COVER.

PS- ADD SEPARATORS OR FILLERS BETWEEN THE M2A 1

AMMUNITION BOXES AS REQUIRED FOR TIGHT PACKING.

P6- ADD SEPARATORS OR FILLERS BETWEEN THE LATCH END

(FRONT) OF M2A1 AMMUNITION BOXES AND WIREBOUND

BOX AS REQUIRED FOR TIGHT PACKING.

P7- APPLY METALLIC SEAL DWG NO. 8794342-4 OR -6 REF

TO WIREBOUND BOX FOR CLOSING, SEALING, AND REPAIR

INSTRUCTIONS SEE DWG NO. 12982865.

,__BOX. WI REBOUND -7S53347 REF

~2-SEPARATOR -1297751S-1 REF, SEE P3

OR

2-FILLER-12977515-2 REF, SEE P4

OR

CUSHION-12977S1S-3 REF, SEE PS MARKING INSTRUCTIONS

ASSEMBLY

ASSEMBLY WEIGHT

PACKAGING COMPONENTS ESTIMATED

WEIGHT (LBS)

1 -WIREBOUND BOX 5.03

2-SEPARATORS 0.54

2-BOXES AMMUNITION M2A1 PACKED 28.1 6

TOTAL 33.73

DISTRIBUTION STATEMENT A.

APPROVED FOR PUBLIC RELEASE;

DISTRIBUTION IS UNLIMITED.

PMIC

M 1 - THE WI REBOUND BOX SHALL BE MARKED IAW DWG NO. 12982865.

M2- PLACE PROPER SHIPPING NAME AND IDENTIFICATION NUMBER:

"PRIMERS, TUBULAR UN0376"

M3- PLACE DESCRIPTIVE NOMENCLATURE AS FOLLOWS:

"200-PRIMERS, PERCUSSION, M82"

M4- PLACE FOLLOWING PERFORMANCE ORIENTED PACKAGING (POP)

MARKINGS ON SIDE OF BOX OPPOSITE DESCRIPTIVE NOMENCLATURE (M3)

(U\ 4C1 /Y54/S/**

\._'2) USA/DOD/AYO

** YEAR PACKED

NOTE: POP RETESTING: THE MANUFACTURER SHALL BE RESPONSIBLE FOR POP

RETESTING AND MARKING OF THE WIREBOUND WOOD BOX IN ACCORDANCE

WITH SECTION 178.601, PARAGRAPH (e), CODE OF FEDERAL REGULATIONS

(CFR), TITLE 49, IF NOT ACCOMPLISHED BY THE DESIGN ACTIVITY.

DO NOT SCALE DRAWING

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON

DECIMAL FRACTION

CONTRACT NUMBER

CONTRACTOR

PART NO. 12977515

DESIGN ACTIVITY U.S. ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

PICATINNY ARSENAL, NEW JERSEY 07806-5000

PACKING AND MARKING FOR MECHANICAL

PROPERTIES f-----____,f---__ ____, 2 PL ±

J PL ± ± DRAWN BY DATE{YR-MO-DA) B 0 x w I RE B 0 u N D F 0 R yp f------+------+---TH-IRD-A-NG-LE-P-RO-JE-CT-ION----< HJS 001006 , r-;-~+----__, ~+ II ~~E~:~~ s~1NSARKAR M 8 2, PR I MER, PERCUSS I 0 N

RA ~ ~ DRAWING APPROV~ SIZE CAGE CODE

BH 1--1---;~~~~~~~LA~ss~yl-----;-;;us~E~D --;:;0 ;;;--N 4McccATcc-L =EN~GR-----.----------1-f.~:;::;~=-~-=:;~ F 1 9 2 0 0 1 2 9 7 7 5 1 5

RH>-----< APPLICATION SCALE NONE UNIT WT. SHEET

F

E

D c

B

A

DRAFT

donn.p.scales Text Box

"200 - PRIMERS, PERCUSSION, M82-FW"

donn.p.scales Text Box

M5- PART NUMBER SHALL BE USED IN PLACE OF NSN, AS FOLLOWS: "M82-FW"

donn.p.scales Text Box

DS000515

donn.p.scales Text Box

DS000516

donn.p.scales Text Box

DS000515-1

donn.p.scales Text Box

DS000515-1

donn.p.scales Text Box

DS000515-3

donn.p.scales Text Box

DS000515-2

donn.p.scales Text Box

DS000515-1

donn.p.scales Text Box

DS000515-3

donn.p.scales Text Box

DS000515-2

donn.p.scales Text Box

DS000515-2

donn.p.scales Polygon donn.p.scales Text Box

DS000515

donn.p.scales Text Box

DS000516