Checked Baggage-SEDS Pricing Template.xlsx
XLSX spreadsheet 44 KB Posted
- Solicitation number
- TSA25-04-03883
About this file
This draft statement of work is for security equipment deployment services for checked baggage screening. The Transportation Security Administration seeks these services to support equipment installation, maintenance, and logistics. Offerors should review the draft SOW and provide any questions or comments by January 6, 2020. The pricing sheets, evaluation criteria, and contract data requirements lists will be released by December 20, 2019. TSA requests industry feedback to refine the requirements before releasing the full request for proposal in the second quarter of fiscal year 2020.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SEDS Draft Labor Categories.pdf | ||
| TEDS overview of work performed_r1.pdf | ||
| Draft SEDS FFP Labor Categories.xlsx | XLSX spreadsheet | |
| Draft SEDS FFP Labor Categories.xlsx | XLSX spreadsheet | |
| CB SEDS IDIQ SOW_Final Draft_r1-2.6.20.docx | DOCX document | |
| Draft SEDS FFP Labor Categories.xlsx | XLSX spreadsheet | |
| CB SEDS IDIQ SOW_Final Draft_r1-2.6.20.docx | DOCX document | |
| Eval Criteria to post.docx | DOCX document | |
| DRAFT CDRL A003 Template - Monthly Status Report.docx | DOCX document | |
| Draft In-line SLIS Template.xlsx | XLSX spreadsheet | |
| TEDS overview of work performed.pdf | ||
| DRAFT CDRL B0001 Template - OTA Invoice Review Report.docx | DOCX document | |
| Draft CDRL A004 Template - In-line Weekly Status Report.xlsx | XLSX spreadsheet | |
| CB-SEDS Pricing Template r2.xlsx | XLSX spreadsheet | |
| Draft CDRL D0001 template - In-line Decommission Report and Checklist.xlsx | XLSX spreadsheet | |
| Checked Baggage SEDS IDIQ SOW.docx | DOCX document |
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CB Pricing Template
| Equipment Type | Shipping (if given greater than 15 business days notice) | Shipping (if given between 3 business days and 15 business days notice) | Urgent Shipping (if given less than 3 business days notice) | Rigging (includes equipment and labor) at CAT X and I airports | Rigging (includes equipment and labor) at CAT II, III, and IV airports | Installation | De-installation (Condition Code X) | De-installation (for all except for Condition Code X) | Packaging/Crating (includes materials and labor) | Temporary Storage at CAT X and I airports | Temporary Storage at CAT II, III, and IV airports | |||||||||||
| Large Screening Equipment | per unit, shipping range | Unit Price | per unit, shipping range | Unit Price | per unit, shipping range | Unit Price | For 1-2 Units | Price | For 1-2 Units | Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price |
| Reduced Size EDS | 0 - 200 miles | 0 - 200 miles | 0 - 200 miles | Daily | Daily | 1 unit | 1 unit | 1 unit | 1 unit | 1 unit per week (week 1) | 1 unit per week (week 1) | |||||||||||
| 201 - 499 miles | 201 - 499 miles | 201 - 499 miles | ||||||||||||||||||||
| 500 - 1000 miles | 500 - 1000 miles | 500 - 1000 miles | Daily (special equpment required, such as Cranes, variable reach forklift, supplemental lift devices) | Daily (special equpment required, such as Cranes, variable reach forklift, supplemental lift devices) | 2+ units | 2+ units | 2+ units | 2+ units | 1 unit per week (week 2 +) | 1 unit per week (week 2 +) | ||||||||||||
| 1000 - 2000 miles | 1000 - 2000 miles | 1000 - 2000 miles | ||||||||||||||||||||
| 2000+ miles | 2000+ miles | 2000+ miles | ||||||||||||||||||||
| Medium and High Speed EDS | 0 - 200 miles | 0 - 200 miles | 0 - 200 miles | Daily | Daily | 1 unit | 1 unit | 1 unit | 1 unit | 1 unit per week (week 1) | 1 unit per week (week 1) | |||||||||||
| 201 - 499 miles | 201 - 499 miles | 201 - 499 miles | ||||||||||||||||||||
| 500 - 1000 miles | 500 - 1000 miles | 500 - 1000 miles | Daily (special equpment required, such as Cranes, variable reach forklift, supplemental lift devices) | Daily (special equpment required, such as Cranes, variable reach forklift, supplemental lift devices) | 2 units | 2 units | 2 units | 2 units | 1 unit per week (week 2 +) | 1 unit per week (week 2 +) | ||||||||||||
| 1000 - 2000 miles | 1000 - 2000 miles | 1000 - 2000 miles | ||||||||||||||||||||
| 2000+ miles | 2000+ miles | 2000+ miles | ||||||||||||||||||||
| Small Screening Equipment | Unit shipping to the same location | Unit Price | Units shipping to the same location | Unit Price | Units shipping to the same location | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price |
| ETD | 1 unit | 1 unit | 1 unit | 1 unit | 1 unit | 1 unit | 1 unit | 1 unit per week (week 1) | 1 unit per week (week 1) | |||||||||||||
| 2 - 4 units | 2 - 4 units | 2 - 4 units | 2 - 4 units | 2 - 4 units | 2 - 4 units | 2 - 4 units | 1 unit per week (week 2 +) | 1 unit per week (week 2 +) | ||||||||||||||
| 5+ units | 5+ units | 5+ units | 5+ units | 5+ units | 5+ units | 5+ units | ||||||||||||||||
| FF&E (see definitions on next tab) | Unit shipping to the same location | Unit Price | Units shipping to the same location | Unit Price | Units shipping to the same location | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price | Unit | Unit Price |
| Lightweight Parts | 1 unit | 1 unit | 1 unit | |||||||||||||||||||
| 2 - 20 units | 2 - 20 units | 2 - 20 units | ||||||||||||||||||||
| 21 - 50 units | 21 - 50 units | 21 - 50 units | ||||||||||||||||||||
| 51+ units | 51+ units | 51+ units | ||||||||||||||||||||
| Heavy Parts | 1 unit | 1 unit | 1 unit | all parts for project, daily price | all parts for project, daily price | 1 unit | 1 unit | 1 unit | 1 unit | |||||||||||||
| 2 - 10 units | 2 - 10 units | 2 - 10 units | 2 - 10 units | 2 - 10 units | 2 - 10 units | 2 - 10 units | ||||||||||||||||
| 11+ units | 11+ units | 11+ units | 11+ units | 11+ units | 11+ units | 11+ units | ||||||||||||||||
| Furniture | 1 unit | 1 unit | 1 unit | 1 unit | ||||||||||||||||||
| 2 - 10 units | 2 - 10 units | 2 - 10 units | 2 - 10 units | |||||||||||||||||||
| 11+ units | 11+ units | 11+ units | 11+ units | |||||||||||||||||||
| UPS associated with Medium and High Speed EDS | 1 unit | 1 unit | 1 unit | 1 unit | ||||||||||||||||||
| 2 - 4 units | 2 - 4 units | 2 - 4 units | 2 - 4 units | |||||||||||||||||||
| 5+ units | 5+ units | 5+ units | 5+ units |
| Additional Fixed Rates | ||
| Description of Services | Unit | Unit Price/Rate |
| Reimbursement agreement Invoice review | Monthly | |
| Site Design - CAD | Hourly | |
| Site Lead - Inline | Monthly | |
| Site Lead - Stand-Alone | Weekly |
Page &P
FF&E definitions
| Pricing group (heavy parts,lightweight parts, and furniture)? | Title (from current Checked Baggage FF&E Guide) | Description (from current Checked Baggage FF&E Guide) |
| lightweight part | 3 1/2" High Channel Guard Rail - 10ft Long (3 1/2"-CH-10ft) | A 3 1/2" high removable fixed guide in 10ft straight increment. |
| lightweight part | 3 1/2" High Channel Guard Rail - 3ft Long (3 1/2"-CH-3ft) | A 3 1/2" high removable fixed guide in 10ft straight increment. |
| lightweight part | 3 1/2" High Channel Guard Rail - 45 Deg-Outside (3 1/2"-CH-45Deg) | A 3 1/2" high removable fixed guide with curved rail to match length of 45 Degree curved roller. |
| lightweight part | 3 1/2" High Channel Guard Rail - 5ft Long (3 1/2"-CH-5ft) | A 3 1/2" high removable fixed guide in 5ft straight increment. |
| lightweight part | 3 1/2" High Channel Guard Rail - 90 Deg-Outside (3 1/2"-CH90Deg) | A 3 1/2" high removable fixed guide with curved rail to match length of 90 Degree curved roller. |
| lightweight part | 6" Turning Wheel (10100-ACC) | A 6” Dia 12” to 42” HYTROL Rubber Turning Wheel with mount hardware. |
heavy part Ball Transfer Table with Cover Plate - 30" x 30", Width -30" (BTT35-30-30) The Ball Transfer Tables with Cover Plate is designed to facilitate quick and easy handling of heavy loads on operations such as the manual rotation and/or correct positioning of products on work stations, and on the convergence of more than two conveyor lines, where bags must be transferred from one line to another. Specifications: 1 in. ball casters; Steel channel frame 3-1/2”x1-1/2”x10ga., 2-1/2”x1”x12ga; Steel cover plate limiting ball exposure to 1/4” above the plate. Dimensions: 30”x30”.
heavy part Ball Transfer Table with Cover Plate - 36" x 36", Width -36" (BTT35-36-36) The Ball Transfer Tables with Cover Plate is designed to facilitate quick and easy handling of heavy loads on operations such as the manual rotation and/or correct positioning of products on work stations, and on the convergence of more than two conveyor lines, where bags must be transferred from one line to another. Specifications: 1 in. ball casters; Steel channel frame 3-1/2”x1-1/2”x10ga., 2-1/2”x1”x12ga; Steel cover plate limiting ball exposure to 1/4” above the plate. Dimensions: 36”x36”.
| lightweight part | Carolina - Anti-fatigue mat 2’x3’ | These mats are made of 100% single piece molded Polyurethane sponge with a non-slip top surface and beveled edges on all four sides for trip prevention. All surfaces are sealed to prevent absorption of cleaning fluids and other liquids. Thickness: 9/16” – 5/8” overall (combined sponge and tread surface thickness). Color: Black with yellow borders around the 4 sides. Size: 2’x3'. |
| lightweight part | Carolina - Anti-fatigue mat 3’x12’ | These mats are made of 100% single piece molded Polyurethane sponge with a non-slip top surface and beveled edges on all four sides for trip prevention. All surfaces are sealed to prevent absorption of cleaning fluids and other liquids. Thickness: 9/16” – 5/8” overall (combined sponge and tread surface thickness). Color: Black with yellow borders around the 4 sides. Size: 3’x12'. |
| lightweight part | Carolina - Anti-fatigue mat 3’x5’ | These mats are made of 100% single piece molded Polyurethane sponge with a non-slip top surface and beveled edges on all four sides for trip prevention. All surfaces are sealed to prevent absorption of cleaning fluids and other liquids. Thickness: 9/16” – 5/8” overall (combined sponge and tread surface thickness). Color: Black with yellow borders around the 4 sides. Size: 3’x5'. |
| lightweight part | Carolina - Anti-fatigue mat 3’x8’ | These mats are made of 100% single piece molded Polyurethane sponge with a non-slip top surface and beveled edges on all four sides for trip prevention. All surfaces are sealed to prevent absorption of cleaning fluids and other liquids. Thickness: 9/16” – 5/8” overall (combined sponge and tread surface thickness). Color: Black with yellow borders around the 4 sides. Size: 3’x8'. |
| furniture | Cramer - EDS Chair Standard (**max 350 lbs**) (black) | The EDS chairs offer a wide variety of ergonomic functions and adjustments. They contain urethane fabric with adjustable arms, seat, back and height. The chairs are on casters. Standard EDS Chair: 350lb max (Black), Seat (20”W x 19.5D), Back (15”W x 15”D). |
| furniture | Cramer - EDS Chair XL (**max 500 lbs**) (black) | The EDS chairs offer a wide variety of ergonomic functions and adjustments. They contain urethane fabric with adjustable arms, seat, back and height. The chairs are on casters. X-Large EDS Chair, 500lb max (Black), Seat (23”W x 20”D), Back (18”W x 18”D). |
| lightweight part | Edge Bump Guard - 3 FT (Bump Guard) | Frame neoprene or equiv. edge bumper with cushioned frame insert |
to fit conveyor frame. Length: 3ft.
lightweight part Edge Bump Guard - 5 FT (Bump Guard) Frame neoprene or equiv. edge bumper with cushioned frame insert to fit conveyor frame. Length: 5ft.
| lightweight part | Edge Guard (Black) (MM-8451A45-10) | A black 10ft roll. |
| furniture | ETD Cabinet | The Explosive Trace Detector cabinet is 57 ¾ ” H x 33 ½ ”W x 30 9/16“D. The top portion of the cabinet contains (1) sliding shelves. The cabinet doors can be locked and the cabinet sits on (4) casters. |
| furniture | ETD Table (TSACPSTABLE28) | The Explosive Trace Detector search table is a reinforced steel table with casters for portability. The table has adjustable legs, a power strip and an under table drawer. The table is fully assembled when shipped. Dimensions: 48”W x 30”D x 28”H. |
| heavy part | Flexible Roller Conveyor – Length - 14' , Width -24" (RLS24012S-14') | The 14ft Flexible Roller Conveyor is eight feet (8') compressed and fourteen feet (14') fully extended. Overall width: 24”. |
| heavy part | Flexible Roller Conveyor - Length - 14' , Width -30" (RLS30012S-14') | The 14ft Flexible Roller Conveyor is eight feet (8') compressed and fourteen feet (14') fully extended. Overall width: 30”. |
| heavy part | Flexible Roller Conveyor – Length - 8' , Width -24" (RLS24012S-8') | The 8ft Flexible Roller Conveyor is four feet (4') compressed and eight feet (8') fully extended. Overall width: 24”. |
| heavy part | Flexible Roller Conveyor – Length - 8' , Width -30" (RLS30012S-8') | The 8ft Flexible Roller Conveyor is four feet (4') compressed and eight feet (8') fully extended. Overall width: 24”. |
| heavy part | Gate Support Legs RS-2 13-3/4"-16-3/4" TOR (RS-2), Width 24" | Gate Support Legs (13-3/4"-16-3/4") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables). |
heavy part Gate Support Legs RS-2 13-3/4"-16-3/4" TOR (RS-2), Width 26" Gate Support Legs (13-3/4"-16-3/4") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-2 13-3/4"-16-3/4" TOR (RS-2), Width 28" Gate Support Legs (13-3/4"-16-3/4") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-2 13-3/4"-16-3/4" TOR (RS-2), Width 30" Gate Support Legs (13-3/4"-16-3/4") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-2 13-3/4"-16-3/4" TOR (RS-2), Width 34" Gate Support Legs (13-3/4"-16-3/4") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-2 13-3/4"-16-3/4" TOR (RS-2), Width 36" Gate Support Legs (13-3/4"-16-3/4") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-3 16-3/8"-19-3/8" TOR (RS-3), Width 24" Gate Support Legs (16-3/8"-19-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-3 16-3/8"-19-3/8" TOR (RS-3), Width 26" Gate Support Legs (16-3/8"-19-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-3 16-3/8"-19-3/8" TOR (RS-3), Width 28" Gate Support Legs (16-3/8"-19-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-3 16-3/8"-19-3/8" TOR (RS-3), Width 30" Gate Support Legs (16-3/8"-19-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-3 16-3/8"-19-3/8" TOR (RS-3), Width 34" Gate Support Legs (16-3/8"-19-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-3 16-3/8"-19-3/8" TOR (RS-3), Width 36" Gate Support Legs (16-3/8"-19-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-4 19-3/8"-25-3/8" TOR (RS-4), Width 24" Gate Support Legs (19-3/8"-25-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-4 19-3/8"-25-3/8" TOR (RS-4), Width 26" Gate Support Legs (19-3/8"-25-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-4 19-3/8"-25-3/8" TOR (RS-4), Width 28" Gate Support Legs (19-3/8"-25-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-4 19-3/8"-25-3/8" TOR (RS-4), Width 30" Gate Support Legs (19-3/8"-25-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-4 19-3/8"-25-3/8" TOR (RS-4), Width 34" Gate Support Legs (19-3/8"-25-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-4 19-3/8"-25-3/8" TOR (RS-4), Width 36" Gate Support Legs (19-3/8"-25-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-5 23-3/8"-29-3/8" TOR (RS-5), Width 24" Gate Support Legs (23-3/8"-29-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-5 23-3/8"-29-3/8" TOR (RS-5), Width 26" Gate Support Legs (23-3/8"-29-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-5 23-3/8"-29-3/8" TOR (RS-5), Width 28" Gate Support Legs (23-3/8"-29-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-5 23-3/8"-29-3/8" TOR (RS-5), Width 30" Gate Support Legs (23-3/8"-29-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-5 23-3/8"-29-3/8" TOR (RS-5), Width 34" Gate Support Legs (23-3/8"-29-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-5 23-3/8"-29-3/8" TOR (RS-5), Width 36" Gate Support Legs (23-3/8"-29-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-6 27-3/8"-39-3/8" TOR (RS-6), Width 24" Gate Support Legs (27-3/8"-39-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-6 27-3/8"-39-3/8" TOR (RS-6), Width 26" Gate Support Legs (27-3/8"-39-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-6 27-3/8"-39-3/8" TOR (RS-6), Width 28" Gate Support Legs (27-3/8"-39-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-6 27-3/8"-39-3/8" TOR (RS-6), Width 30" Gate Support Legs (27-3/8"-39-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-6 27-3/8"-39-3/8" TOR (RS-6), Width 34" Gate Support Legs (27-3/8"-39-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-6 27-3/8"-39-3/8" TOR (RS-6), Width 36" Gate Support Legs (27-3/8"-39-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-7 37-3/8"-49-3/8" TOR (RS-7), Width 24" Gate Support Legs (37-3/8"- 49-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-7 37-3/8"-49-3/8" TOR (RS-7), Width 26" Gate Support Legs (37-3/8"- 49-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-7 37-3/8"-49-3/8" TOR (RS-7), Width 28" Gate Support Legs (37-3/8"- 49-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-7 37-3/8"-49-3/8" TOR (RS-7), Width 30" Gate Support Legs (37-3/8"- 49-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-7 37-3/8"-49-3/8" TOR (RS-7), Width 34" Gate Support Legs (37-3/8"- 49-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Gate Support Legs RS-7 37-3/8"-49-3/8" TOR (RS-7), Width 36" Gate Support Legs (37-3/8"- 49-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
| heavy part | Power Mobile Lift Table/Electronic Baggage Cart | These electro-hydraulic scissor lift tables are portable and are used to transport passenger baggage within TSA’s screening areas. They minimize the need to lift and carry heavy baggage. |
| heavy part | Rigid Gravity Roller Conveyor - Length - 10ft, Width -24" (19GSR-24-10ft) | The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high. |
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 10ft straight section, Overall width: 24".
heavy part Rigid Gravity Roller Conveyor - Length - 10ft, Width -26" (19GSR-26-10ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 10ft straight section, Overall width: 26".
heavy part Rigid Gravity Roller Conveyor - Length - 10ft, Width -28" (19GSR-28-10ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 10ft straight section, Overall width: 28".
heavy part Rigid Gravity Roller Conveyor - Length - 10ft, Width -30" (19GSR-30-10ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 10ft straight section, Overall width: 30".
heavy part Rigid Gravity Roller Conveyor - Length - 10ft, Width -34" (19GSR-34-10ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 10ft straight section, Overall width: 34".
heavy part Rigid Gravity Roller Conveyor - Length - 10ft, Width -36" (19GSR-36-10ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 10ft straight section, Overall width: 36".
heavy part Rigid Gravity Roller Conveyor – Length - 3ft, Width -24" (19GSR-24-3ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 3ft straight section, Overall width: 24".
heavy part Rigid Gravity Roller Conveyor – Length - 3ft, Width -26" (19GSR-26-3ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 3ft straight section, Overall width: 26".
heavy part Rigid Gravity Roller Conveyor - Length - 3ft, Width -28" (19GSR-28-3ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 3ft straight section, Overall width: 28".
heavy part Rigid Gravity Roller Conveyor - Length - 3ft, Width -30" (19GSR-30-3ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 3ft straight section, Overall width: 30".
heavy part Rigid Gravity Roller Conveyor - Length - 3ft, Width -34" (19GSR-34-3ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 3ft straight section, Overall width: 34".
heavy part Rigid Gravity Roller Conveyor - Length - 3ft, Width -36" (19GSR-36-3ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 3ft straight section, Overall width: 36".
heavy part Rigid Gravity Roller Conveyor - Length - 5ft, Width -24" (19GSR-24-5ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 5ft straight section, Overall width: 24".
heavy part Rigid Gravity Roller Conveyor - Length - 5ft, Width -26" (19GSR-26-5ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 5ft straight section, Overall width: 26".
heavy part Rigid Gravity Roller Conveyor - Length - 5ft, Width -28" (19GSR-28-5ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 5ft straight section, Overall width: 28".
heavy part Rigid Gravity Roller Conveyor - Length - 5ft, Width -30" (19GSR-30-5ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 5ft straight section, Overall width: 30".
heavy part Rigid Gravity Roller Conveyor - Length - 5ft, Width -34" (19GSR-34-5ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 5ft straight section, Overall width: 34".
heavy part Rigid Gravity Roller Conveyor - Length - 5ft, Width -36" (19GSR-36-5ft) The Rigid Gravity Roller Conveyors have side frames three and one half inches (3 1/2"), 10 gauge formed steel, dark grey baked powder coated finish, 1.9" dia. 16 gauge Zinc roller 3" axle centers with 7/16" spring loaded hex shaft, sealed bearings oiled or grease, rollers set high.
Minimum conveyor live load capacity of three hundred pounds (300lb) per linear foot. Specifications: Frame: 3-1/2” or 4-1/2” deep x 1-1/2” flange x 10 ga. powder painted formed steel channel with bolt-in cross members; Butt couplings: Bolt-on type for bolting sections together; Rollers: 19-SR 1.9 in. dia. x 16 ga. unplated o galvanized steel tubing; 199-SR 1.9 in. dia. X 9 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed; Axles: 7/16 in. hex shaft, spring loaded. Dimensions: Length - 5ft straight section, Overall width: 36".
| heavy part | Rigid Gravity Roller Curve Conveyor - 45 Deg, Width -24" (19GSRC-24-45deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 45 Degrees, Overall Width: 24". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 45 Deg, Width -26" (19GSRC-26-45deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 45 Degrees, Overall Width: 26". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 45 Deg, Width -28" (19GSRC-28-45deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 45 Degrees, Overall Width: 28". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 45 Deg, Width -30" (19GSRC-30-45deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 45 Degrees, Overall Width: 30". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 45 Deg, Width -34" (19GSRC-34-45deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 45 Degrees, Overall Width: 34". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 45 Deg, Width -36" (19GSRC-36-45deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 45 Degrees, Overall Width: 36". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 90 Deg, Width -24" (19GSRC-24-90deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 90 Degrees, Overall Width: 24". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 90 Deg, Width -26" (19GSRC-26-90deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 90 Degrees, Overall Width: 26". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 90 Deg, Width -28" (19GSRC-28-90deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 90 Degrees, Overall Width: 28". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 90 Deg, Width -30" (19GSRC-30-90deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 90 Degrees, Overall Width: 30". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 90 Deg, Width -34" (19GSRC-34-90deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 90 Degrees, Overall Width: 34". |
| heavy part | Rigid Gravity Roller Curve Conveyor - 90 Deg, Width -36" (19GSRC-36-90deg) | The Rigid Gravity Roller Curve Conveyors are designed and constructed to facilitate the transport of heavy loads. Dimensions: Roller Curve Conveyors - 90 Degrees, Overall Width: 36". |
| heavy part | Rigid Gravity Roller Gate- Length - 3ft, Width -24" (19GSR-SB-24-3ft) | The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 24". |
heavy part Rigid Gravity Roller Gate- Length - 3ft, Width -26" (19GSR-SB-26-3ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 26".
heavy part Rigid Gravity Roller Gate- Length - 3ft, Width -28" (19GSR-SB-28-3ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 28".
heavy part Rigid Gravity Roller Gate- Length - 3ft, Width -30" (19GSR-SB-30-3ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 30".
heavy part Rigid Gravity Roller Gate- Length - 3ft, Width -34" (19GSR-SB-34-3ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 34".
heavy part Rigid Gravity Roller Gate- Length - 3ft, Width -36" (19GSR-SB-36-3ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 36".
heavy part Rigid Gravity Roller Gate- Length - 4ft, Width -24" (19GSR-SB-24-4ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 3ft, Overall width: 24".
heavy part Rigid Gravity Roller Gate- Length - 4ft, Width -26" (19GSR-SB-26-4ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 4ft, Overall width: 26".
heavy part Rigid Gravity Roller Gate- Length - 4ft, Width -28" (19GSR-SB-28-4ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 4ft, Overall width: 28".
heavy part Rigid Gravity Roller Gate- Length - 4ft, Width -30" (19GSR-SB-30-4ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 4ft, Overall width: 30".
heavy part Rigid Gravity Roller Gate- Length - 4ft, Width -34" (19GSR-SB-34-4ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 4ft, Overall width: 34".
heavy part Rigid Gravity Roller Gate- Length - 4ft, Width -36" (19GSR-SB-36-4ft) The Rigid Gravity Roller Gates are designed to provide a passageway for personnel, lift trucks, and other equipment. Spring balanced gates provide minimum weight lift. These lift gates can be used with any of the gravity rollers conveyors provided by TSA, as long as the overall width of both components is consistent. Specifications: Painted steel frame; 1-3/8” dia. galvanized rollers on 3” centers; Hinge mechanism with die springs and gravity section; Latch mechanism; Lift handles on both sides. Dimensions: Length - 4ft, Overall width: 36".
| heavy part | Safety Popout Roller (Option) - SA-072923 | The Safety Pop Out Roller option is available for the straight/curved roller conveyor and lift gate. It should be the last roller in the section that sits next to a powered conveyor. A possible issue with the use of the Safety Pop Out Roller option on the lift gate is that the roller tends to fall out when the lift gate is raised to the full open position. |
| lightweight part | Sharp Edge Safety Cap | The Sharp Edge Safety Cap is 3.75”L x 1.625”W cap (with nuts and bolts) to cover the sharp metal 3.5” x 1.5” end of the conveyor. Will fit 1 ¾” center to center bolt pattern. Made of black UHMW hard plastic. |
| heavy part | Support Legs MS-2 13-3/4"-16-3/4" TOR(MS-2), Width 24" | Support Legs (13-3/4"-16-3/4") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables). |
heavy part Support Legs MS-2 13-3/4"-16-3/4" TOR(MS-2), Width 26" Support Legs (13-3/4"-16-3/4") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-2 13-3/4"-16-3/4" TOR(MS-2), Width 28" Support Legs (13-3/4"-16-3/4") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-2 13-3/4"-16-3/4" TOR(MS-2), Width 30" Support Legs (13-3/4"-16-3/4") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-2 13-3/4"-16-3/4" TOR(MS-2), Width 34" Support Legs (13-3/4"-16-3/4") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-2 13-3/4"-16-3/4" TOR(MS-2), Width 36" Support Legs (13-3/4"-16-3/4") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-3 16-3/8"-19-3/8" TOR (MS-3), Width 24" Support Legs (16-3/8"-19-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-3 16-3/8"-19-3/8" TOR (MS-3), Width 26" Support Legs (16-3/8"-19-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-3 16-3/8"-19-3/8" TOR (MS-3), Width 28" Support Legs (16-3/8"-19-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-3 16-3/8"-19-3/8" TOR (MS-3), Width 30" Support Legs (16-3/8"-19-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-3 16-3/8"-19-3/8" TOR (MS-3), Width 34" Support Legs (16-3/8"-19-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-3 16-3/8"-19-3/8" TOR (MS-3), Width 36" Support Legs (16-3/8"-19-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-4 19-3/8"-25-3/8" TOR (MS-4), Width 24" Support Legs (19-3/8"-25-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-4 19-3/8"-25-3/8" TOR (MS-4), Width 26" Support Legs (19-3/8"-25-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-4 19-3/8"-25-3/8" TOR (MS-4), Width 28" Support Legs (19-3/8"-25-3/8") - width 28" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-4 19-3/8"-25-3/8" TOR (MS-4), Width 30" Support Legs (19-3/8"-25-3/8") - width 30" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-4 19-3/8"-25-3/8" TOR (MS-4), Width 34" Support Legs (19-3/8"-25-3/8") - width 34" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-4 19-3/8"-25-3/8" TOR (MS-4), Width 36" Support Legs (19-3/8"-25-3/8") - width 36" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-5 23-3/8"-29-3/8" TOR (MS-5), Width 24" Support Legs (23-3/8"-29-3/8") - width 24" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-5 23-3/8"-29-3/8" TOR (MS-5), Width 26" Support Legs (23-3/8"-29-3/8") - width 26" (in increments to match roller conveyors, lift gates and ball transfer tables).
heavy part Support Legs MS-5 23-3/8"-29-3/8" TOR (MS-5), Width 28" Support Legs (23-3/8"-29-3/8") - width 28" (in increments to match roller…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .