SATPC0039973 Tab 04 Drawing 7 (FLL-HPROJ-0013_-).pdf
PDF 147 KB Posted
- Attached to
- Strongback Fabrication
- Solicitation number
- 80NSSC25918799Q
About this file
This engineering drawing is a detailed technical specification for a Pedestal Adapter Plate designed for NASA's Armstrong Flight Research Center. The document specifies a -101 detail part made from steel (ASTM A572/A572M Grade 50 or ASTM A992/A992M), with precise dimensional requirements including tolerances of .1 to .0010 for decimals and 0.5 to 0.25 degrees for angles. Surface finishing requirements include an epoxy primer and polyurethane topcoat in gloss white, with a surface roughness of 125 microinches maximum on machined surfaces. The drawing includes specific marking instructions, requiring a human-readable identification marking of "1JYR2-FLL-HPROJ-0013-101" with 0.5-inch character height, and is marked as CUI//SP-EXPT (Controlled Unclassified Information with Special Export Control) with an EAR99/NLR (No License Required) export classification.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
7 6 5 4 3
B B
C C
7 6 5 4 2
2 1
A
8 3
D
A
D
NOTES - UNLESS OTHERWISE SPECIFIED:
4X .594 +.008 -.001
THRU 2X 3.562
2X 3.562
.750-16 UNF-2B THRU
1.000
6.000
REVISION HISTORY
CHECKENGRDATEDESCRIPTIONREV
2025-09-10APPROVED FOR INITIAL RELEASE -
SHEET 1 OF 1CI NO. SCALE: 1.000
-FLL-HPROJ-00131JYR2D
REV.DWG. NO.CAGESIZE
PEDESTAL ADAPTER PLATE
TITLE
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
ARMSTRONG FLIGHT RESEARCH CENTER
EDWARDS, CALIFORNIA
2025-09-02A.C. HOLGUINENGR
2025-09-08C.A. MASELLACHECK
REVIEW
2025-09-08L.D. HUDSONREVIEW
2025-09-02A.C. HOLGUINDRAWN
2025-09-02A.C. HOLGUINDESIGN
DATEAPPROVALS
THIRD ANGLE PROJECTION
DO NOT SCALE DRAWING
DECIMALS
.X .1
.XX .03
.XXX .010
.XXXX .0010
ANGLES
.X 0.5
.XX 0.25
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES. TOLERANCES ARE:
PARTS SHALL BE FREE OF
BURRS AND SHARP EDGES
INTERPRET DRAWING PER
ASME Y14.100
USED ONNEXT ASSEMBLY
FLLFLL-HPROJ-0003
PARTS LIST
NOTES
MATERIAL
SPECIFICATION
NOMENCLATURE
OR DESCRIPTION
PART OR
IDENTIFYING NO.
CAGE CODE
ITEM
NO.QTY REQD
.030 A
.030 A B
1. MATERIAL: STEEL ASTM A572/A572M GRADE 50 OR ASTM A992/
A992M
2. SURFACE ROUGHNESS ON MACHINED SURFACES SHALL BE 125
MICROINCHES MAX
3. PRIMER/TOP COAT FINISH PER MIL-DTL-18264 AS FOLLOWS:
A. ONE COAT MIL-PRF-23377 EPOXY PRIMER, TYPE I, CLASS
C1, C2, or N
B. TWO COATS MIL-PRF-85285 POLYURETHANE, TYPE II,
COLOR 17925 (GLOSS WHITE) PER SAE INTERNATIONAL
SPECIFICATION AMS-STD-595
C. MASK HOLES/SLOTS PRIOR TO PRIMER AND PAINT
4 APPLY HUMAN-READABLE IDENTIFICATION MARKING PER MIL-
STD-130 BY HANDWRITTEN, PERMANENT INK. USE 0.5 INCH
CHARACTER HEIGHT. LOCATE APPROXIMATELY AS
SHOWN. MARKING SHALL READ AS FOLLOWS:
"1JYR2-FLL-HPROJ-0013-101" AND LATEST REVISION
5. UNLESS OTHERWISE SPECIFIED ALL SURFACES:
.063 A B
6. INTERPRET DIMENSIONING AND TOLERANCING PER
ASME Y14.5-2018
-101 PEDESTAL ADAPTER PLATE DETAIL
4 FS
.010
CONTROLLED BY: A.C. HOLGUIN, AFRC, NASA
CUI//SP-EXPT
REVIEWED FOR CUI BY: A.C. HOLGUIN, AFRC, NASA
(EXCEPT FOR EXPORT CONTROL)
The information contained in this document is technical in content, but not technical data as defined by the International Traffic in Arms Regulations (ITAR) or technology as defined by the Export Administration Regulations (EAR), and therefore is designated as EAR99/NLR, (No License Required). General Prohibition Six (Embargo) applies to all items subject to the EAR, (i.e. item on the CCL and within EAR99/NLR). You may not make an export or re-export contrary to the provisions of part 746 (Embargoes and Other Special Controls) of the EAR and 22 CFR §126.1 of the ITAR.
EAR99/NLR NOTICE
A
B
Carla Masella Full Size
| Sheet 1 |
| Views |
| new_view_3 |
| right_4 |
| Zones |
| D8 |
| D7 |
| D6 |
| D5 |
| D4 |
| D3 |
| D2 |
| D1 |
| C8 |
| C7 |
| C6 |
| C5 |
| C4 |
| C3 |
| C2 |
| C1 |
| B8 |
| B7 |
| B6 |
| B5 |
| B4 |
| B3 |
| B2 |
| B1 |
| A8 |
| A7 |
| A6 |
| A5 |
| A4 |
| A3 |
| A2 |
| A1 |
File details come from the government source that posted it. Updated .