SATPC0039973 Tab 04 Drawing 3 (FLL-HPROJ-0006_-).pdf
PDF 181 KB Posted
- Attached to
- Strongback Fabrication
- Solicitation number
- 80NSSC25918799Q
About this file
This document is a detailed engineering drawing for a NASA Armstrong Flight Research Center project, specifically for a Strongback Cap Plate. The drawing consists of two sheets describing two separate plate components: a back cap plate (-101) and a front cap plate (-103). The plates are fabricated from Aluminum 6061-T651 with precise dimensional specifications, including multiple hole locations and tolerances. Finishing requirements include a chemical conversion (Alodine) finish and two coats of polyurethane paint in OSHA Safety Blue. The drawing specifies surface roughness of 0.125 microinches maximum for machined surfaces and requires human-readable identification marking per military standards. The document is marked as Controlled Unclassified Information (CUI) with export control considerations, indicating it is part of a sensitive NASA research or engineering project.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
7 6 5 4 3
B B
C C
7 6 5 4 2
2 1
A
8 3
D
A
D
NOTES - UNLESS OTHERWISE SPECIFIED:
48X .688 +.008 -.001
THRU
18.486
12X 3.500
.000
12X 9.593
12X 15.686
X
X
X
X
X
X
X
X
X
X
X
X
17.086
135.820
(.50) STOCK
REVISION HISTORY
CHECKENGRDATEDESCRIPTIONREV
2025-09-17APPROVED FOR INITIAL RELEASE -
SHEET 1 OF 2CI NO. SCALE: 0.125
-FLL-HPROJ-00061JYR2D
REV.DWG. NO.CAGESIZE
STRONGBACK CAP PLATE
TITLE
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
ARMSTRONG FLIGHT RESEARCH CENTER
EDWARDS, CALIFORNIA
2025-09-02A.C. HOLGUINENGR
2025-09-17C.A. MASELLACHECK
REVIEW
2025-09-17L.D. HUDSONREVIEW
2025-09-02A.C. HOLGUINDRAWN
2025-09-02A.C. HOLGUINDESIGN
DATEAPPROVALS
THIRD ANGLE PROJECTION
DO NOT SCALE DRAWING
DECIMALS
.X .1
.XX .03
.XXX .010
.XXXX .0010
ANGLES
.X 0.5
.XX 0.25
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN INCHES. TOLERANCES ARE:
PARTS SHALL BE FREE OF
BURRS AND SHARP EDGES
INTERPRET DRAWING PER
ASME Y14.100
USED ONNEXT ASSEMBLY
FLLFLL-HPROJ-0003
PARTS LIST
NOTES
MATERIAL
SPECIFICATION
NOMENCLATURE
OR DESCRIPTION
PART OR
IDENTIFYING NO.
CAGE CODE
ITEM
NO.QTY REQD
.062 A
1. MATERIAL: ALUMINUM 6061-T651 PLATE PER AMS-QQ-A-250/11
PERMITTED VARIATIONS IN DIMENSIONING AND TOLERANCING
IN STOCK PLATE PER ANSI H35.2-2024 UNLESS OTHERWISE
SPECIFIED.
2. PRIMER/TOP COAT FINISH PER MIL-DTL-18264 AS FOLLOWS:
A. CHEMICAL CONVERSION (ALODINE) FINISH PER MIL-DTL-
5541, CLASS 3
B. TWO COATS MIL-PRF-85285 POLYURETHANE, TYPE II,
COLOR 15092 (OSHA SAFETY BLUE) PER SAE INTERNATIONAL
SPECIFICATION AMS-STD-595
C. MASK HOLES PRIOR TO PRIMER AND PAINT
3 APPLY HUMAN-READABLE IDENTIFICATION MARKING PER MIL-
STD-130 BY HANDWRITTEN, PERMANENT INK. USE 0.5 INCH
CHARACTER HEIGHT. LOCATE APPROXIMATELY AS
SHOWN. MARKING SHALL READ AS FOLLOWS:
"1JYR2-FLL-HPROJ-0006-APPROPRIATE DASH NO." AND LATEST REVISION
4. INTERPRET DIMENSIONING AND TOLERANCING PER
ASME Y14.5-2018
5. SURFACE ROUGHNESS ON MACHINED SURFACES SHALL BE .125
MICROINCHES MAX
-101 STRONGBACK BACK CAP PLATE DETAIL
.125 A B
CONTROLLED BY: A.C. HOLGUIN, AFRC, NASA
CUI//SP-EXPT
REVIEWED FOR CUI BY: A.C. HOLGUIN, AFRC, NASA
(EXCEPT FOR EXPORT CONTROL)
The information contained in this document is technical in content, but not technical data as defined by the International Traffic in Arms Regulations (ITAR) or technology as defined by the Export Administration Regulations (EAR), and therefore is designated as EAR99/NLR, (No License Required). General Prohibition Six (Embargo) applies to all items subject to the EAR, (i.e. item on the CCL and within EAR99/NLR). You may not make an export or re-export contrary to the provisions of part 746 (Embargoes and Other Special Controls) of the EAR and 22 CFR §126.1 of the ITAR.
EAR99/NLR NOTICE
A
B
Carla Masella Full Size
7 6 5 4 3
B B
C
D
7 6 5 4 3
A
A
D
C
36X .688 +.008 -.001
THRU
12.39312X 3.500
.000
12X 9.593
10.993
X
X
X
X
X
X
X
X
X
X
X
135.820
(.500) STOCK
SHEET 2 OF 2CI NO. SCALE: 0.125
-FLL-HPROJ-00061JYR2D
REV.DWG. NO.CAGESIZE
.062 A
-103 STRONGBACK FRONT CAP PLATE DETAIL
.125 A B
CONTROLLED BY: A.C. HOLGUIN, AFRC, NASA
CUI//SP-EXPT
A
B
Carla Masella Full Size
| Sheet 1 |
| Views |
| new_view_3 |
| right_4 |
| Zones |
| D8 |
| D7 |
| D6 |
| D5 |
| D4 |
| D3 |
| D2 |
| D1 |
| C8 |
| C7 |
| C6 |
| C5 |
| C4 |
| C3 |
| C2 |
| C1 |
| B8 |
| B7 |
| B6 |
| B5 |
| B4 |
| B3 |
| B2 |
| B1 |
| A8 |
| A7 |
| A6 |
| A5 |
| A4 |
| A3 |
| A2 |
| A1 |
| Sheet 2 |
| Views |
| new_view_6 |
| right_7 |
| Zones |
| D8 |
| D7 |
| D6 |
| D5 |
| D4 |
| D3 |
| D2 |
| D1 |
| C8 |
| C7 |
| C6 |
| C5 |
| C4 |
| C3 |
| C2 |
| C1 |
| B8 |
| B7 |
| B6 |
| B5 |
| B4 |
| B3 |
| B2 |
| B1 |
| A8 |
| A7 |
| A6 |
| A5 |
| A4 |
| A3 |
| A2 |
| A1 |
File details come from the government source that posted it. Updated .