Attachment_F26_-_Option_CFGS_Configuration.pdf

NASA Requirements

Option CFGS

GSA Options Required:

K34F

K34R

K37

K41

K49

K51

PLV

RKE

TT

WR

FFS

IE1

K04

K06F

K07S

K27

ALW

AW2

BA

CBU4

CE

CPT

DAOH

DSS

DSS2

Additional Requirements:

Front vertical bumper guide poles with amber light on top, Bores stainless steel with LED light or equal

Add - LED remote spotlight, Go Light Stryker 30204 or equal, on center of cab roof with joystick in center console

Add - LED red light in ceiling of cab wired to separate switch in center console

Havis #DS-PAN-212 Toughbook certified docking station for Panasonic Toughbook CF-19 MK4 and higher laptops with power supply, #C-HDM-214 8.5" Heavy duty telescoping pole, #CMD-107 Motion device and tilt/swivel mount

Roll up doors on both sides in the extended cab area shall be furnished. Each of the roll up doors shall include slide out trays with tool boards. The slide out trays shall utilize 250# slides and have side and rear wall panels fabricated from aluminum diamond plate. Supply (1) each SCBA Smart Dock Gen II #F103150 SCBA mounting bracket mounted vertically on each rear wall of compartment. Scorpion spray on coating or equal. Include LED rope lighting each compartment.

Include power locks wired to cab door locks.

Add cab height walkthrough with flexible bellows between cab and modular body. Opening approximately 17" W X 46" H, with door. Door to have minimum 150 square inches of window.

Rear facing attendant seat to have SB-2 base to lock in rear or forward facing position

Add modified K04 CPR seat, approx 54", to fit two persons with (6) point seat belts. This deletes cabinets H, J, K and O. It reduces compartment "D" height 1/2 height.

Install MK747SS with lock in Upper bulkhead cabinet, ILOS K27 on MVDO. Hindged on left side.

Handle/lock on right side, (KP147) Roll up door on bottom.

Add - One (1) Mass Casualty Floor Mount Assembly, Stryker, or equal, shall be provided for non-upgraded Stryker X-frame cots. The assembly shall be equipped with quick release mechanism for ease of operation, 6391-000-000 and 6391-001-002 or equal

Add restocking feature L1, L2, One (1) surface mount bracket for a defibrillator/monitor, LifePak 1196-000309, shall be bolted through the counter to the cabinet. Ferno model #0822238 or equal brkt.Locate on top of cabinet J3.

K06F Options A through F below

a. equipment hook 6500-700-003A

b. trendelberg, base storage net 6500-160-000A

c. head end storage 6500-128-000A

d. Stryker XPS (Expandable Patient Surface) to Stryker Power Pro XT cot

e. Dual wheel locks, short hook 6086-602-010A

f. no steer lock option.

Add LED Green shoreline indicator above both shoreline inlets, (6F-80-5400) (HL451) Inlets to be located on rear of unit streetside above S/S rear tail lights

Whelen LED Traffic Advisor mounted above rear doors with controller in cab.

Zico electric O2 lift located in streetside forward exterior compartment F. Universal O2 rack.

CPT Comment - Red FLNA 3042 with white modular body roof from drip rail up and white cab roof per customer supplied photos

Upgrade rear chevrons to 3M Diamond Grade with 100% coverage of rear painted surface (IQ807)

One (1) day of field training shall be provided for a minimum of four (4) government personnel at contractor’s place of performance. The training shall include written procedures on proper start up, operation, and shutdown of the vehicles. Training shall also include a recommended preventive maintenance schedule and procedures for the scope of work contained within.

Change reflective orange belt to white per customer drawings.

Add (2) 1" reflective blue belts, (1) above and (1) below the white belt per customer drawings.

Add Streetside splint cabinet. NOTE: cabinet will be 4"-6" in heght do to 43" clear headroom requirement.

Change two forward facing red warning lights on center section of CooBar to blue along with

(2) rear upper 9X7's inboard of outer red 9X7's. On a separate switch.

Add commercial body, center rear doors, nominal 50" aisle space, 3/4 height compartment D with one adjustable shelf, dog leg F for stair chair. OEM rear tail lights.

K37 Comment - locate in right front I/O cabinet next to standard 12VDC prewire.

K04 Comment - with extended work area