Attachment_F25_-_Option_CFGV_Configuration.pdf

Nevada Test Site Requirements

Option CFGV

GSA Options Required:

K34R

K53

KA

PLV

SL

AP

AT

B14

CBU4

CPD

CPT

K06F

K07S

K34F

ORD

Additional Requirements:

Add (2) Whelen 7 series red LED lights, (1) ea. Above rear wheel wells, to flash with primary.

Add (2) Whelen 5 series red LED lights (1) each on the lower outside corners of the curbside entrance door, (1) inside and (1) outside to flash when door is open Add 3 inch roll up floor on base wall cabinet and face of squad bench.

Add Kwikee step below curbside entrance door Delete cabinet to rear of action area and extend action area. Add Corrian action area surface

CPT, comment - red from roof drip rail down, white modular body roof, FLNA3051, Add reflective gold pinstripe, approximately 1" wide, located above and below the center white reflective belt. Leave approximately 1" between the gold pinstripe and the center white belt.

Install (2) 6 Point seat belt positions on squad bench ILOS

K05 comment - Install (2) Zico Q-R-D2 holders in paitent compartment behind rear facing attendant seat below pass through window area.

Add (2) Zico walk a way brackets #SC-50-H-SF knock down bracket or equal, high cycle clips, short foot plate, for 5.5" dia cylinders with #ABS angle support bracket. Locate in lower compartment "D" (1) eac rear corner.

Install (2) coat hooks on wall 2 in compartment D per photos

Install fire extinguishers to center, wall 2 of compartment D between the SCBA brackets.see pictures

Ship STA - spare tire loose

Rear chevrons to cover rear painted surface including doors. Leave cutout for "PARAMEDIC" below windows. USE 3M DIAMOND GRADE MATERIAL

K15B comment - to be white reflective, see photos for layout.

Add interior colors to be dove gray over Brusch Pewter, gray upholstery

Add commercial body, centered rear doors, OEM tail lights, 3/4 D with one adjustable shelf, 50" aisle, dog leg F for stair chair, Ord to be black

Provide and install (1) Sscor VX2 - 2310V orf equal portable suction unit with wall bracket and charger. Mount per location in customer supplied photo

Add ¼” flat bar on wall 2 extending from within 2" of bottom upward 24" of exterior compartment “D” for SCBA Brackets. This bar will extend from the top to the bottom center and allow for the shelving to be flush with wall 2.

Add (2) Whelen 5 series TIR6 LED flashing lights on REAR DOORS (1) each rear inner door panel lower outside corner to flash when doors are open. Just like side door.

Install customer supplied Knox box in cabinet behind rear facing attendant seat. See photos

Install customer supplied Ferno LP-12 mount in action area. See photos

Install customer supplied Physio Control charger in action area behind LP-12 mount. See photos

Add (1) 110VAC outlet in action area behind Ferno LP-12 mount. See photo

Delete onboard 12VDC suction system.

Install Whelen Howlers (1) each side under front bumper

Install LED rope lighting inside all interior cabinets with on/off switch in action area

Delete 12VDC power supply in inside/outside access. Leave the outlet, delete the extra wires.

Add a perforated Star of Life decal on both rear door windows. Blue to be same as blue on cab door decals. (Cab door decals provided by customer)

Add black perforated decal on curbside door window.

RBV comment - Install approx. 4 inch black powder coated running boards on cab model Go Industries #42323 Rancher Cab steps, or equal Black. Same as Austin Travis

Add NNSS Letters & Star of Life per Photos - Sides, Rear, Top of Unit to say NNSS above Star of Life, M-1 below Star of Life, side lettering to be reflective gold with black shadow. SOL's to be dark blue with gold outline. This order is for X2 Units - Unit ID TBD

Rear captain’s chair attendant seat to be on swivel base, retain child safety and have a 6 point harness ILOS, (ref 214641F)

Install the standard coax and power cables (1) to center console and (1) behind passenger seat ILOS

Install stainless steel threshold protector on compartment "D"

Install black duck boards in bottom of compartment "D"

Merge cabinets O & P. Install solid door hindged on bottom. Use lever latch in center. Include LED light in this cabinet also.

Add Zico O2 lift in modified left front exterior compartment. Fit for an "H" size O2 bottle