O-86(5)_Event_18423_Sample_Contract_and_Exhibits.pdf

State of Minnesota Contract

SWIFT Contract No.:

This Contract is between the State of Minnesota, acting through its Commissioner of Administration (“State”) and [Contractor] whose designated business address is [Contractor’s business address] (“Contractor”). State and Contractor may be referred to jointly as “Parties.”

Recitals

1. State issued a solicitation identified as SWIFT Event No. G0210-2000018423 on June 26, 2026, for Office Supplies (“Solicitation”);

2. Contractor provided a response to the Solicitation indicating its interest in and ability to provide the goods or services requested in the Solicitation; and

3. Subsequent to an evaluation in accordance with the terms of the Solicitation and negotiation, the Parties desire to enter into a contract.

Accordingly, the Parties agree as follows:

Contract

Term of Contract

Effective date. September 1, 2026, or the date the State obtains all required signatures under Minn. Stat. § 16C.05, subd. 2, whichever is later. The Contractor must not begin work under this Contract until this Contract is fully executed and the Contractor has been notified by the State’s Authorized Representative to begin the work.

Expiration date. August 31, 2027, or until all obligations have been satisfactorily fulfilled, whichever occurs first. The contract may be extended for up to an additional 48 months, in increments as determined by the State, through a duly executed amendment.

Contract Use. This Contract is not exclusive and shall not be construed as guarantying a minimum or maximum amount of usage.

Contractor’s Duties The Contractor shall perform all duties described in this Contract to the satisfaction of the State.

Representations and Warranties

Under Minn. Stat. §§ 15.061 and 16C.03, subd. 3, and other applicable law the State is empowered to engage such assistance as deemed necessary.

Contractor warrants that it is duly qualified and shall perform its obligations under this Contract in accordance with the commercially reasonable standards of care, skill, and diligence in Contractor’s industry, trade, or profession, and in accordance with the specifications set forth in this Contract, to the satisfaction of the State.

Contractor warrants that it possesses the legal authority to enter into this Contract and that it has taken all actions required by its procedures, bylaws, and applicable laws to exercise that authority, and to lawfully authorize its undersigned signatory to execute this Contract, or any part thereof, and to bind Contractor to its terms.

Time The Contractor must comply with all the time requirements described in this Contract. In the performance of this Contract, time is of the essence.

Compensation and Conditions of Payment

Compensation. The State will pay for performance by the Contractor under this Contract in accordance with the breakdown of costs as set forth in Exhibit D which is attached and incorporated into this Contract.

Conditions of Payment. All duties performed by the Contractor under this Contract must be performed to the State’s satisfaction and in accordance with all applicable federal, state, and local laws, ordinances, rules, and regulations including business registration requirements of the Office of the Secretary of State. The Contractor will not receive payment for work found by the State to be unsatisfactory or performed in violation of federal, state, or local law.

Authorized Representative

The State's Authorized Representative (SAR) is Molly Gunderson, Buyer 3, 50 Sherburne Ave.

Suite 112, St. Paul, MN 55155, 651.201.3171, molly.gunderson@state.mn.us, or their successor or delegate, and has the responsibility to monitor the Contractor’s performance.

The Contractor's Authorized Representative (CAR) is [name, title] at the following business address and telephone number: [insert business address and telephone number], or his/her successor. If the Contractor’s Authorized Representative changes at any time during this Contract, the Contractor must immediately notify the State.

Exhibits The following Exhibits are attached and incorporated into this Contract. In the event of a conflict between the terms of this Contract and its Exhibits, or between Exhibits, the order of precedence is first the Contract, and then in the following order:

Exhibit A: Contract Terms Exhibit B: Insurance Requirements Exhibit C: Specifications, Duties, and Scope of Work

• Exhibit C, Supplement 1: Punch-Out Catalog Solution Exhibit D: Pricing

• Exhibit D: Price Schedule

• Exhibit D: Supplement 1 Sample Invoice and Sample Quote mailto:molly.gunderson@state.mn.us

Exhibit E: Additional Attachments

1. Contractor The Contractor certifies that the appropriate person(s) have executed the Contract on behalf of the Contractor as required by applicable articles, bylaws, resolutions, or ordinances

2. State Agency With delegated authority

Print name: Print name:

Signature: Signature:

Title: Date: Title: Date:

3. Commissioner of Administration

As delegated to The Office of State Procurement

Print name:

Signature:

Title: Date:

Exhibit A: Contract Terms

Prompt Payment and Invoicing.

Prompt Payment. The State will pay the Contractor pursuant to Minn. Stat. § 16A.124, which requires payment within 30 days following receipt of an undisputed invoice, or merchandise or service, whichever is later. Terms requesting payment in less than 30 days will be changed to read “Net 30 days.” Notwithstanding the foregoing, the State may pay the Contractor in advance for purchases as allowed pursuant to Minn. Stat. §16A.065.

The payment for each order will only be made for goods received or services actually performed that have been accepted by the ordering entity, and meet all terms, conditions, and specifications of the Contract and the ordering document.

Invoicing. The invoice must be in the same format as the sample invoice form approved as Exhibit D, Supplement 1 with the Contract, unless an alternative format is approved in writing by the State Authorized Representative, or delegate. See Exhibit D, Supplement 1 for a list of minimum invoice requirements.

Assignment, Amendments, Waiver, and Contract Complete.

Assignment. The Contractor may neither assign nor transfer any rights or obligations under this Contract without the prior consent of the State and a fully executed assignment agreement, executed and approved by the authorized parties or their successors.

Amendments. Any amendment to this Contract must be in writing and will not be effective until it has been executed and approved by the authorized parties or their successors.

Waiver. If the State fails to enforce any provision of this Contract, that failure does not waive the provision or its right to enforce it.

Contract Complete. This Contract contains all negotiations and agreements between the State and the Contractor. No other understanding regarding this Contract, whether written or oral, may be used to bind either party.

Termination.

Termination for Convenience. The State or Commissioner of Administration may cancel this Contract at any time, with or without cause, upon 30 days’ written notice to the Contractor. Upon termination for convenience, the Contractor will be entitled to payment, determined on a pro rata basis, for services or goods satisfactorily performed or delivered.

Termination for Breach. If the Contractor fails to perform according to the contract terms and conditions, the State is authorized to immediately cancel the Contract or purchase order, or any portion of it, and may obtain replacement goods or services and charge the difference of costs to the defaulting Contractor. In the event of default, the State reserves the right to pursue any other remedy available by law. A Contractor may be removed from the vendors list, suspended or debarred from receiving a Contract for failure to comply with terms and conditions of the Contract, or for failure to pay the State for the cost incurred on the defaulted Contract.

Termination for Insufficient Funding. The State may immediately terminate this Contract if it does not obtain funding from the Minnesota Legislature, or other funding source; or if funding cannot be continued at a level sufficient to allow for the payment of the services addressed within this Contract. Termination must be by written notice to the Contractor. The State is not obligated to pay for any services that are provided after notice and effective date of termination. However, the Contractor will be entitled to payment, determined on a pro rata basis, for services satisfactorily performed to the extent that dedicated funds are available. The State will not be assessed any penalty if the Contract is terminated because of the decision of the Minnesota Legislature, or other funding source, not to appropriate funds. The State must provide the Contractor notice of the lack of funding. This notice will be provided within a reasonable time of the State’s receiving notice.

Force Majeure.

Neither party shall be responsible to the other or considered in default of its obligations within this Contract to the extent that performance of any such obligations is prevented or delayed by acts of God, war, riot, disruption of government, or other catastrophes beyond the reasonable control of the party unless the act or occurrence could have been reasonably foreseen and reasonable action could have been taken to prevent the delay or failure to perform. A party relying on this provision to excuse performance must provide the other party prompt written notice of the inability to perform and take all necessary steps to bring about performance as soon as practicable.

Indemnification.

In the performance of this Contract, the Indemnifying Party must indemnify, save, and hold harmless the State, its agents, and employees, from any claims or causes of action, including attorney’s fees incurred by the State, to the extent caused by Indemnifying Party’s:

• Intentional, willful, or negligent acts or omissions; or

• Actions that give rise to strict liability; or

• Breach of contract or warranty.

The Indemnifying Party is defined to include the Contractor, Contractor’s reseller, any third party that has a business relationship with the Contractor, or Contractor’s agents or employees, and to the fullest extent permitted by law. The indemnification obligations of this section do not apply in the event the claim or cause of action is the result of the State’s sole negligence. This clause will not be construed to bar any legal remedies the Indemnifying Party may have for the State’s failure to fulfill its obligation under this Contract.

Nothing within this Contract, whether express or implied, shall be deemed to create an obligation on the part of the State to indemnify, defend, hold harmless or release the Indemnifying Party. This shall extend to all agreements related to the subject matter of this Contract, and to all terms subsequently added, without regard to order of precedence.

Governing Law, Jurisdiction, and Venue.

Minnesota law, without regard to its choice-of-law provisions, governs this Contract. Venue for all legal proceedings out of this Contract, or its breach, must be in the appropriate state or federal court with competent jurisdiction in Ramsey County, Minnesota.

Contract Use by State Agencies.

To the extent applicable, the Contract does not prohibit state agencies from using their delegated purchasing authority to procure similar goods and services from other sources.

Warranty.

The Contractor warrants to the ordering entity that materials and equipment furnished under the Contract will be free from defects not inherent in the quality required or permitted, and that the work will conform to the requirements of the contract. Work not conforming to these requirements, including substitutions not properly approved and authorized in writing may be considered defective. The Contractor’s warranty excludes remedy for damage or defect caused by abuse, modifications not executed by the Contractor, improper or insufficient maintenance, improper operation, or normal wear and tear and normal usage. If requested, the Contractor shall furnish satisfactory evidence as to the kind and quality of materials and equipment used.

All installation materials and labor shall be guaranteed for a period of one (1) year following the date of final acceptance.

During the first year following acceptance, the Contractor shall, upon notification by the ordering entity of any malfunctions, make necessary repairs, including labor, travel, and materials, at the Contractor’s expense.

Original Equipment Manufacturer (OEM Warranty).

The equipment offered must include the OEM standard warranty. The Contractor is responsible for the cost of any inspections, adjustments, warranted parts, and labor charges to repair or replace warranted parts that are a result of equipment failure(s) during the warranty period. This shall be performed promptly unless otherwise mutually agreed in writing by the Customer and the Contractor. This warranty shall commence when the unit is put into service.

OEM Extended Warranty Options. If the Contractor provides an OEM Extended Warranty Option, the Contractor must provide a copy of the applicable terms and conditions, including a detail of coverage, to the State upon request. The cost of an OEM Extended Warranty must include all associated costs.

Contractor (Add-On) Warranty Options. The Contractor may provide additional warranty options, which include, but are not limited to travel pickup, or delivery charges that are a result of equipment failure(s) prior to or during the warranty period or extended warranty period. This warranty option shall commence when the unit is put into service and is in addition to OEM warranty options stated above.

Cooperative Purchasing Venture (CPV) Members.

The Contract will be available to all CPV members. Minn. Stat. § 16C.03, subd. 10 authorizes the State, acting through its Office of State Procurement, to enter into purchasing agreements with one or more governmental units and other entities allowable by law, as described in Minn. Stat. § 471.59, subd. 1, to exercise jointly the purchasing powers and functions each has individually. This authority is referred to as the Cooperative Purchasing Venture program. For more information, see State website https://mn.gov/admin/osp/.

The Contractor agrees to extend the Contract to CPV members at the same prices, terms, conditions, and specifications.

With the approval of the Contractor, a CPV member may add additional terms to its ordering document applicable to the CPV member’s purchasing activities. Such additional terms shall not modify, diminish, or derogate the terms applicable to the State.

Foreign Outsourcing of Work Prohibited.

All services under this contract shall be performed within the borders of the United States. All storage and processing of information shall be performed within the borders of the United States. This provision also applies to work performed by all subcontractors.

Delivery.

Contractor is obligated to deliver within the quoted lead times. If delivery is not made within that time frame, the State reserves the right to deem the Contractor in default.

Risk of Loss.

The State is relieved of all risks of loss or damage to the goods and equipment during periods of transportation, installation by the Contractor, or while in the possession of the Contractor or its agent.

https://mn.gov/admin/osp/

Purchase Orders and Purchasing Cards.

The parties agree that there is no minimum order requirements or charges to process an individual purchase order unless otherwise stated in the Contract. The Purchase Order number must appear on all documents (e.g., invoices, packing slips, etc.).

The Contractor must accept a purchasing card for order placement in addition to accepting a purchase order, without passing the processing fees for the purchasing card back to the State. The State’s single purchase maximum on the Contract is $5,000 on the purchasing card, but it may be increased with the State’s and the Contractor’s approval.

Items Offered as New.

All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

Product Changes During the Contract.

All product offered should be available during the initial term of the contract. The Contractor must notify the State’s Authorized Representative immediately if the manufacturer discontinues or replaces a contracted model number. A replacement model number must meet the contract specifications. The State is under no obligation to accept a replacement model. Any change to a contracted model number must be confirmed in writing by the State through a written amendment. The State reserves the right to request documentation for any requested change under this section to evaluate how the specifications of the replacement product deviates from the specifications of the replaced product.

Product Returns.

Non-Defective Conforming Product. The Customer may return an unopened, non-defective product conforming to the specifications of an order within 60 calendar days of the invoice date with no additional fees. If the non-defective conforming product is returned within 60 calendar days of the invoice date after it has been opened, the Contractor may charge the Customer a restocking fee of up to 10% of the cost of the product. Return shipping costs to return a non-defective conforming product to the Contractor is the responsibility of the Customer.

Defective or Non-conforming Product. The Customer may return any product determined by the Customer as defective or not conforming to the specifications, order, or contract, within 60 calendar days of receipt with no restocking or return shipping fee.

The Contractor should provide the Customer with a Return Merchandise Authorization number (RMA) and must arrange for a “call tag” to be issued via a “carrier” to order pick up of the defective or non-conforming product from the Customer. The “carrier” must pick up the defective or non-conforming product at the address to which the product was shipped.

Replacement of Defective or Non-conforming Product. The Customer may request the Contractor provide a replacement product or cancel the order. If the Customer choses to have the defective or non-conforming product replaced, the Contractor must replace a defective or non-conforming product at no cost to the Customer.

Return of Defective or Non-conforming Product (without replacement). The Customer’s account must be credited within fourteen (14) calendar days of arrival of the returned product at the Contractor’s location. The amount to be credited must be the equal of the price of the product plus all freight, shipping, handling, or ancillary charges associated with shipment of the product from and return to the shipping location. If, after inspection, the Contractor determines that the product is not defective or non-conforming, the Contractor may bill the Customer for the return shipping charges.

Subcontracting.

This Contract may not be subcontracted in whole or in part.

Data Disclosure.

Under Minn. Stat. § 270C.65, subd. 3 and other applicable law, the Contractor consents to disclosure of its social security number, federal employer tax identification number, and Minnesota tax identification number, already provided to the State, to federal and state agencies, and state personnel involved in the payment of state obligations. These identification numbers may be used in the enforcement of federal and state laws which could result in action requiring the Contractor to file state tax returns, pay delinquent state tax liabilities, if any, or pay other state liabilities.

Government Data Practices.

The Contractor and State must comply with the Minnesota Government Data Practices Act, Minn. Stat. Ch. 13, (or, if the State contracting party is part of the Judicial Branch, with the Rules of Public Access to Records of the Judicial Branch promulgated by the Minnesota Supreme Court as the same may be amended from time to time) as it applies to all data provided by the State under this Contract, and as it applies to all data created, collected, received, stored, used, maintained, or disseminated by the Contractor under this Contract. The civil remedies of Minn. Stat. § 13.08 apply to the release of the data governed by the Minnesota Government Practices Act, Minn. Stat. Ch. 13, by either the Contractor or the State.

If the Contractor receives a request to release the data referred to in this clause, the Contractor must immediately notify and consult with the State’s Authorized Representative as to how the Contractor should respond to the request. The Contractor’s response to the request shall comply with applicable law.

Intellectual Property Rights.

Definitions. For the purpose of this Section, the following words and phrases have the assigned definitions:

“Documents” are the originals of any databases, computer programs, reports, notes, studies, photographs, negatives, designs, drawings, specifications, materials, tapes, disks, or other materials, whether in tangible or electronic forms, prepared by the Contractor, its employees, agents, or subcontractors, in the performance of this Contract.

“Pre-Existing Intellectual Property” means intellectual property developed prior to or outside the scope of this Contract, and any derivatives of that intellectual property.

“Works” means all inventions, improvements, discoveries (whether or not patentable), databases, computer programs, reports, notes, studies, photographs, negatives, designs, drawings, specifications, materials, tapes, and disks conceived, reduced to practice, created or originated by the Contractor, its employees, agents, and subcontractors, either individually or jointly with others in the performance of this Contract. “Works” includes Documents.

Ownership. The State owns all rights, title, and interest in all of the intellectual property rights, including copyrights, patents, trade secrets, trademarks, and service marks in the Works and Documents created and paid for under this Contract. The Documents shall be the exclusive property of the State and all such Documents must be immediately returned to the State by the Contractor upon completion or cancellation of this Contract. To the extent possible, those Works eligible for copyright protection under the United States Copyright Act will be deemed to be “works made for hire.” The Contractor assigns all right, title, and interest it may have in the Works and the Documents to the State. The Contractor must, at the request of the State, execute all papers and perform all other acts necessary to transfer or record the State’s ownership interest in the Works and Documents.

Pre-existing Intellectual Property. Each Party shall retain ownership of its respective Pre-Existing Intellectual Property. The Contractor grants the State a perpetual, irrevocable, non-exclusive, royalty free license for Contractor’s Pre-Existing Intellectual Property that are incorporated in the products, materials, equipment, deliverables, or services that are purchased through the Contract.

Obligations.

Notification. Whenever any invention, improvement, or discovery (whether or not patentable) is made or conceived for the first time or actually or constructively reduced to practice by the Contractor, including its employees and subcontractors, in the performance of this Contract, the Contractor will immediately give the State’s Authorized Representative written notice thereof, and must promptly furnish the State’s Authorized Representative with complete information and/or disclosure thereon.

Representation. The Contractor must perform all acts, and take all steps necessary to ensure that all intellectual property rights in the Works and Documents are the sole property of the State, and that neither Contractor nor its employees, agents, or subcontractors retain any interest in and to the Works and Documents. The Contractor represents and warrants that the Works and Documents do not and will not infringe upon any intellectual property rights of other persons or entities.

Indemnification. Notwithstanding any other indemnification obligations addressed within this Contract, the Contractor will indemnify; defend, to the extent permitted by the Attorney General; and hold harmless the State, at the Contractor’s expense, from any action or claim brought against the State to the extent that it is based on a claim that all or part of the Works or Documents infringe upon the intellectual property rights of others. The Contractor will be responsible for payment of any and all such claims, demands, obligations, liabilities, costs, and damages, including but not limited to, attorney fees. If such a claim or action arises, or in the Contractor’s or the State’s opinion is likely to arise, the Contractor must, at the State’s discretion, either procure for the State the right or license to use the intellectual property rights at issue or replace or modify the allegedly infringing works or documents as necessary and appropriate to obviate the infringement claim. This remedy of the State will be in addition to and not exclusive of other remedies provided by law.

Copyright.

The Contractor shall save and hold harmless the State of Minnesota, its officers, agents, servants and employees, from liability of any kind or nature, arising from the use of any copyrighted or noncopyrighted compositions, secret process, patented or nonpatented invention, article or appliance furnished or used in the performance of the Contract.

Assignment of Antitrust Rights.

Upon the request of the State of Minnesota, Contractor will irrevocably assign to State any state or federal antitrust claim or cause of action that the Contractor now has or which may accrue to the Contractor in the future, in connection with any goods, services, or combination provided by Contractor under the terms of this Contract.

Survivability of Orders.

In the event the term of any order or Professional/Technical Services work order (“Order”) placed under this Contract extends past the termination or expiration of this Contract, the terms and conditions of this Contract shall remain in full force and effect as it applies to such order and will continue in effect for such order until the term of that order expires or the order is cancelled or terminated in accordance with the terms of this Contract.

Contractor’s Documents.

Any licensing and maintenance agreement, or any order-specific agreement or document, including any pre-installation, linked or “click through” agreement that is allowed by, referenced within or incorporated within the Contract whenever the Contract is used for a State procurement, whether directly by the Contractor or through a Contractor’s agent, subcontractor or reseller, is agreed to only to the extent the terms within any such agreement or document do not conflict with the Contract or applicable Minnesota or Federal law, and only to the extent that the terms do not modify, diminish or derogate the terms of the Contract or create an additional financial obligation to the State. Any such agreement or document must not be construed to deprive the State of its sovereign immunity, or of any legal requirements, prohibitions, protections, exclusions or limitations of liability applicable to this Contract or afforded to the State by Minnesota law. A State employee’s decision to choose “accept” or an equivalent option associated with a “click-through” agreement does not constitute the State’s concurrence or acceptance of terms, if such terms are in conflict with this section.

State Audits.

Under Minn. Stat. § 16C.05, subd. 5, the Contractor’s books, records, documents, and accounting procedures and practices relevant to this Contract are subject to examination by the State, the State Auditor, or Legislative Auditor, as appropriate, for a minimum of six years from the expiration or termination of this Contract.

Usage Reports.

Contractor must track and report to the State usage data on this Contract (Usage Reports). Usage Reports should be sent via email to osp.usagereports@state.mn.us. A Usage Report must identify the State Contract Number and provide the following information:

• The total amount of spend under the Contract by the State and other entities,

• The total amount of spend by State agencies, and

• The total amount of spend by other entities (CPV members).

Contractor must send a quarterly Usage Report, or as otherwise requested. Quarters are as follows:

• First Quarter, from July 1 to September 30,

• Second Quarter, from October 1 to December 31,

• Third Quarter, from January 1 to March 31, and

• Fourth Quarter, from April 1 to June 30.

A quarterly Usage Report is due within thirty days of the end of a quarter. A requested Usage Report is due within thirty days from when the request was made. Contractor must provide the State with a final Usage Report within 30 calendar days of the expiration or termination of the Contract. Failure to provide a Usage Report may result in the State cancelling the Contract. This term survives the expiration or termination of the Contract.

Administrative Fee.

Contractor must remit to the Department of Administration, Office of State Procurement on a quarterly basis an administration fee of 1% (.01 multiplication factor) of the total amount of spend under the Contract as reported in the Usage Report (Administrative Fee). The Administrative Fee is due within thirty days of the end of a quarter. The Administrative Fee may be submitted through Automated Clearing House (ACH) or by check. Contact CPV.Program@state.mn.us for detailed information on the ACH payment option. If paying by check, the check should be made payable to the State of Minnesota, and submitted to:

Office of State Procurement 112 Administration Building 50 Sherburne Avenue St. Paul, MN 55155 mailto:osp.usagereports@state.mn.us mailto:CPV.Program@state.mn.us

Diverse Spend Reporting.

If the total value of the Contract may exceed $500,000, including all extension options, Contractor must track and report, on a quarterly basis, the amount paid to diverse businesses both: 1) directly to subcontractors performing under the Contract, and 2) indirectly to diverse businesses that provide supplies/services to your company (in proportion to the revenue from this Contract compared to Contractor’s overall revenue). When this applies, Contractor will register in a free portal to help report the Tier 2 diverse spend, and the requirement continues as long as the Contract is in effect.

Publicity and Endorsement.

Publicity. Any publicity regarding the subject matter of this Contract must identify the State as the sponsoring agency and must not be released without prior written approval from the State’s Authorized Representative. For purposes of this provision, publicity includes notices, informational pamphlets, press releases, information posted on corporate or other websites, research, reports, signs, and similar public notices prepared by or for the Contractor individually or jointly with others, or any subcontractors, with respect to the program, publications, or services provided resulting from this Contract.

Endorsement. The Contractor must not claim that the State endorses its products or services.

Debarment by State, its Departments, Commissions, Agencies, or Political Subdivisions.

Contractor certifies that neither it nor its principals is presently debarred or suspended by the Federal government, the State, or any of the State’s departments, commissions, agencies, or political subdivisions. Contractor’s certification is a material representation upon which the Contract award was based. Contractor shall provide immediate written notice to the State’s Authorized Representative if at any time it learns that this certification was erroneous when submitted or becomes erroneous by reason of changed circumstances.

Federal Funds.

Compliance with Federal Requirements. Federal money will be used or may potentially be used to pay for all or part of the goods, construction or services under the Contract. The Contractor is responsible for compliance with all federal requirements imposed on the funds and accepts full financial responsibility for any requirements imposed by the Contractor’s failure to comply with federal requirements.

Certification regarding Debarment, Suspension, Ineligibility, and Voluntary Exclusion. Federal money will be used or may potentially be used to pay for all or part of the work under the Contract, therefore Contractor certifies that it is in compliance with federal requirements on debarment, suspension, ineligibility and voluntary exclusion specified in the solicitation document implementing Executive Order 12549. Contractor’s certification is a material representation upon which the Contract award was based.

Contingency Fees Prohibited.

Pursuant to Minn. Stat. § 10A.06, no person may act as or employ a lobbyist for compensation that is dependent upon the result or outcome of any legislation or administrative action.

Certification of Nondiscrimination (in accordance with Minn. Stat. § 16C.053).

If the value of this Contract, including all extensions, is $50,000 or more, Contractor certifies it does not engage in and has no present plans to engage in discrimination against Israel, or against persons or entities doing business in Israel, when making decisions related to the operation of the vendor's business. For purposes of this section, "discrimination" includes but is not limited to engaging in refusals to deal, terminating business activities, or other actions that are intended to limit commercial relations with Israel, or persons or entities doing business in Israel, when such actions are taken in a manner that in any way discriminates on the basis of nationality or national origin and is not based on a valid business reason.

Non-discrimination (in accordance with Minn. Stat. § 181.59).

The Contractor will comply with the provisions of Minn. Stat. § 181.59.

E-Verify Certification (in accordance with Minn. Stat. § 16C.075).

For services valued in excess of $50,000, Contractor certifies that as of the date of services performed on behalf of the State, Contractor and all its subcontractors will have implemented or be in the process of implementing the federal E- Verify Program for all newly hired employees in the United States who will perform work on behalf of the State.

Contractor is responsible for collecting all subcontractor certifications and may do so utilizing the E-Verify Subcontractor Certification Form available at E-Verify Subcontractor Certification Form. All subcontractor certifications must be kept on file with Contractor and made available to the State upon request.

Affirmative Action Requirements The State intends to carry out its responsibility for requiring affirmative action by its contractors.

Covered Contracts and Contractors. If the Contract exceeds $100,000 and the Contractor employed more than 40 full-time employees on a single working day during the previous 12 months in Minnesota or in the state where it has its principal place of business, then the Contractor must comply with the requirements of Minn. Stat. § 363A.36 and Minn. R. 5000.3400-5000.3600.

General. Minn. R. 5000.3400-5000.3600 implements Minn. Stat. § 363A.36. These rules include, but are not limited to, criteria for contents, approval, and implementation of affirmative action plans; procedures for issuing certificates of compliance and criteria for determining a contractor’s compliance status; procedures for addressing deficiencies, sanctions, and notice and hearing; annual compliance reports; procedures for compliance review; and contract consequences for non-compliance. The specific criteria for approval or rejection of an affirmative action plan are contained in various provisions of Minn. R. 5000.3400-5000.3600 including, but not limited to, Minn. R.

5000.3420-5000.3500 and 5000.3552-5000.3559.

Disabled Workers. The Contractor must comply with the following affirmative action requirements for disabled workers.

AFFIRMATIVE ACTION FOR DISABLED WORKERS

The Contractor must not discriminate against any employee or applicant for employment because of physical or mental disability in regard to any position for which the employee or applicant for employment is qualified. The Contractor agrees to take affirmative action to employ, advance in employment, and otherwise treat qualified disabled persons without discrimination based upon their physical or mental disability in all employment practices such as the following: employment, upgrading, demotion or transfer, recruitment, advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship.

The Contractor agrees to comply with the rules and relevant orders of the Minnesota Department of Human Rights issued pursuant to the Minnesota Human Rights Act.

In the event of the Contractor's noncompliance with the requirements of this clause, actions for noncompliance may be taken in accordance with Minn. Stat. § 363A.36, and the rules and relevant orders of the Minnesota Department of Human Rights issued pursuant to the Minnesota Human Rights Act.

https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fosp.admin.mn.gov%2Fsites%2Fosp%2Ffiles%2Fpdf%2Feverifysubcertform.doc&wdOrigin=BROWSELINK

The Contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices in a form to be prescribed by the Commissioner. Such notices must state the Contractor's obligation under the law to take affirmative action to employ and advance in employment qualified disabled employees and applicants for employment, and the rights of applicants and employees.

The Contractor must notify each labor union or representative of workers with which it has a collective bargaining agreement or other contract understanding, that the Contractor is bound by the terms of Minn. Stat. § 363A.36, of the Minnesota Human Rights Act and is committed to take affirmative action to employ and advance in employment physically and mentally disabled persons.

Consequences. The consequences for the Contractor’s failure to implement its affirmative action plan or make a good faith effort to do so include, but are not limited to, suspension or revocation of a certificate of compliance by the Commissioner, refusal by the Commissioner to approve subsequent plans, and termination of all or part of this Contract by the Commissioner or the State.

Certification. The Contractor hereby certifies that it is in compliance with the requirements of Minn. Stat. § 363A.36 and Minn. R. 5000.3400-5000.3600 and is aware of the consequences for noncompliance.

Equal Pay Certification.

If required by Minn. Stat. §363A.44, the Contractor must have a current Equal Pay Certificate prior to Contract execution. If Contractor's Equal Pay Certificate expires during the term of this Contract, Contractor must promptly re-apply for an Equal Pay Certificate with the Minnesota Department of Human Rights and notify the State's Authorized Representative once the Contractor has received the renewed Equal Pay Certificate. If Contractor claims to be exempt, the State may require Contractor to verify its exempt status.

Hazardous Substances.

To the extent that goods supplied under this Contract are hazardous chemicals or otherwise require hazard communication under applicable federal or state law, the Contractor must provide current Safety Data Sheets (SDSs), product labels, and hazard communication information in compliance with applicable laws and regulations. The Contractor must maintain current SDSs for all applicable products and make them available to the State upon request.

SDSs must be available electronically through the Contractor’s catalog, ordering platform, or other State-approved method. Any requested SDS must be provided by the Contractor within 5 Calendar days of the request.

The Contractor must not offer, sell, distribute, or supply products under this Contract that are prohibited or restricted under applicable federal or Minnesota law, including but not limited to:

Products Containing Triclosan Banned. The Contractor must comply with Minn. Stat. § 145.945.

Products Containing Certain Types of Polybrominated Diphenyl Ether Banned. The Contractor must comply with Minn. Stat. § 325E.385-325E.388.

Coal Tar Sealant Use and Sale Prohibited. The Contractor must comply with Minn. Stat. § 116.202.

Products Containing Mercury. The Contractor must comply with Minn. Stat. 116.92.

Products containing PFAS. The Contractor must not offer, sell, distribute, or supply any product under this Contract that is prohibited under Minn. Stat. § 116.943, including products with intentionally added PFAS in categories prohibited as of January 1, 2025, and any additional product categories prohibited during the term of the Contract. The Contractor must maintain documentation sufficient to demonstrate compliance and must provide such documentation to the State upon request. Upon request, the Contractor must provide a written certification from the manufacturer or supplier that a product does not contain https://www.revisor.mn.gov/statutes/cite/116.943#stat.116.943 intentionally added PFAS, or must remove the product from the State catalog until compliance can be verified.

Products containing lead and cadmium. Products subject to Minn. Stat. § 325E.3892, including school supplies, craft supplies, chalk, crayons, markers, children’s paints, and other covered products, must not be offered, sold, distributed, or supplied under this Contract if they exceed applicable lead or cadmium limits.

39.7 Product packaging supplied under this Contract must comply with Minn. Stat. § 115A.965, including limits on lead, cadmium, mercury, and hexavalent chromium in packaging.

Printers and Multi-Functional Devices.

The Contractor must indicate in the catalog or other marketing materials if the product will not operate, is not intended to operate, or will not operate under full manufacturer’s warranty, using paper with a post-consumer recycled content.

If marketing material is silent about using recycled content paper, the Contractor agrees that the product meets or exceeds the State’s requirements.

Paper and Printing Requirements.

In accordance with Minn. Stat. § 16C.073, when practicable under the scope of the Contract, the Contractor must make available, identify, and promote products and services that support the State’s environmentally preferable purchasing requirements, including:

• uncoated copy paper, office paper, and printing paper;

• recycled-content copy paper with at least 30 percent post-consumer material by weight;

• recycled-content office paper and printing paper with at least 10 percent postconsumer material by weight, and higher postconsumer content where available and cost-effective;

• copy, office, and printing paper that has not been dyed with colors, excluding pastel colors;

• recycled-content copy, office, and printing paper that is manufactured using little or no chlorine bleach or chlorine derivatives;

• reusable binding materials or staples and binding methods that do not use glue;

• soy-based inks;

• printer and duplication cartridges that have at least 10% postconsumer material, are remanufactured, or are backed by a vendor-offered takeback program that ensures cartridges are recycled consistent with Minn. Stat. § 115A.03, subd. 25b;

• produce reports, publications, and periodicals that are readily recyclable; and

• paper made on a paper machine located in Minnesota, when available and practicable.

This requirement does not apply to coated paper that is made with at least 50 percent post-consumer materials.

The Contractor must print documents on both sides of paper where commonly accepted publishing practices allow.

Uniforms.

When required by the ordering entity, Contractors and their subcontractors shall be properly uniformed prior to entering any facility. The Contractor’s or their subcontractor’s company name must be identifiable on the uniform.

IT Accessibility Standard.

The State of Minnesota (Executive branch state agencies) has developed IT Accessibility Standard effective September 1, 2010. The standard entails, in part, the Web Content Accessibility Guidelines (WCAG) 2.1 (Level AA) and Section 508 which can be viewed at: https://mn.gov/mnit/government/policies/accessibility/. The standard related to accessible documents can be viewed at: Expectations for Accessible Documents (Updated May 2024) (mn.gov).

https://mn.gov/mnit/government/policies/accessibility/ https://mn.gov/mnit/assets/Expectations%20for%20Accessible%20Documents_tcm38-628507.pdf

The Standards apply to web sites, software applications, electronic reports and output documentation, training delivered in electronic formats (including, but not limited to, documents, videos, and webinars), among others. As upgrades are made to the software/products/subscriptions available through this Contract, the Contractor agrees to develop functionality which supports accessibility. If any issues arise due to nonconformance with the above mentioned accessibility Standards, the Contractor agrees to provide alternative solutions upon request at no additional charge to the State.

When updates or upgrades are made to the products or services available through this Contract, the Contractor agrees to document how the changes will impact and/or improve the product’s/service’s accessibility and usability. This documentation, upon request, must be provided to the State in advance of the change, occurring within an agreed upon timeframe sufficient for the state to review the changes and either approve them or request a remediation plan from the Contractor. If agreed-upon updates fail to improve the product or service’s accessibility or usability as planned, the failure to comply with this requirement may be cause for contract cancellation or for the State to consider the Contractor in default.

Nonvisual Access Standards.

Pursuant to Minn. Stat. § 16C.145, the Contractor must comply with the following nonvisual technology access standards to the extent required by law:

• That the effective interactive control and use of the technology, including the operating system applications programs, prompts, and format of the data presented, are readily achievable by nonvisual means;

• That the nonvisual access technology must be compatible with information technology used by other individuals with whom the blind or visually impaired individual must interact;

• That nonvisual access technology must be integrated into networks used to share communications among employees, program participants, and the public; and

• That the nonvisual access technology must have the capability of providing equivalent access by nonvisual means to telecommunications or other interconnected network services used by persons who are not blind or visually impaired; and

• Executive branch state agencies subject to Section 16E.03, subdivision 9, are not required to include nonvisual technology access standards developed under this Section in contracts for the procurement of information technology.

These standards do not require the installation of software or peripheral devices used for nonvisual access when the information technology is being used by individuals who are not blind or visually impaired.

Supply Chain Security.

Notwithstanding anything else in this Section, this Section does not and shall not limit any other rights of the State under this Contract, including, but not limited to, warranties, acceptance, and return policy, if any.

Security Practices and Preventive Controls. The Contractor will use reasonable commercial efforts to ensure that the Contractor and any subcontractors or third parties involved in assembling, manufacturing, packaging, distributing, handling, warehousing, transporting or shipping State goods, including goods intended to be but not yet delivered to the State, meet all applicable security standards and all applicable local, state, federal, and international laws, rules and regulations (hereinafter “supply chain security”).

Contractor must maintain certification/accreditation in an official supply chain security program and comply with that program’s security standards for all orders sourced from the Contract. Official supply chain security program is defined as one of the following: ISO 28000 or 27036 (as applicable), SAE AS5553 or other SAE standard (as applicable), Customs-Trade Partnership Against Terrorism (C- TPAT), Authorized Economic Operator (AEO), or other program accepted in writing by the State, Office of MN.IT Services (f/k/a Office of Enterprise Technology and d/b/a MN.IT or MN.IT Services)(“MN.IT”) and the State, Department of Administration’s Office of State Procurement (“OSP”). To demonstrate certification/accreditation, Contractor must provide to OSP and MN.IT within one month following the effective date of this Contract or amendment adding this Section, whichever is later, a letter verifying its certification/accreditation in an official supply chain security program. Contractor will promptly notify OSP and MN.IT of any change to its certification/accreditation.

Alternatively, if Contractor is not certified/accredited or loses certification/accreditation, Contractor must complete a MN.IT security form to confirm that it complies with supply chain security. The form will require supporting documentation of any responses and must be completed to MN.IT’s satisfaction.

Notification of Supply Chain Security Breach. Contractor will promptly notify OSP, MN.IT, and the ordering entity, if different from MN.IT, of any breach of supply chain security involving State goods, including goods intended to be but not yet delivered to the State.