12494.pdf

Porter Neuroscience Research Center Phase II PERKINS+WILL National Institutes of Health Project No. NIH - HQC90156 GMP Bid Proposal Set 01/29/10

ROLLER SHADES

12 494-1

SECTION 12494 – ROLLER SHADES

PART 1 - GENERAL

A. PROJECT INCLUDES

1. Roller shades (as indicated on the Drawings)

a. ShadeClothes (all other conditions)

b. Black-out (at Conference Rooms)

B. QUALITY ASSURANCE

1. Fire-Test-Response Characteristics: Passes NFPA 701.

2. Electrical Components, Devices, and Accessories: Listed and labeled, NFPA 70, Article 100.

3. Corded Window Covering Product Standard: Comply with WCMA A 100.1.

C. PERFORMANCE REQUIREMENTS

1. Utilize materials that maximize recycled content and regional material criteria as per the objectives of LEED MR 4.1, MR 4.2, MR 5.1, and MR 5.2 to achieve stated project goals of recycled content and regional materials as per Division 1 Section “LEED Requirements”.

D. SUBMITTALS:

1. LEED Submittals:

a. Credit MR 4.1 and 4.2: Product Data and certification letter indicating percentages by weight of post-consumer and pre-consumer recycled content for products having recycled content. Include statement indicating costs for each product having recycled content.

b. Credit MR 5.1 and 5.2: Product Data indicating origin of materials and location of manufacturer for regionally extracted and manufactured materials (within 500 miles of Project).

1) Include statement indicating distance from manufacturer to

Project for each regionally manufactured material.

2) Include statement indicating distance from point of extraction, harvest, or recovery to Project for each raw material used in regionally manufactured materials.

E. PRODUCTS

1. Roller Shades – 5% Openness Factor:

a. Shade Band Material: PVC-coated polyester; Material Width, 60 inches (1520 mm); Bottom Hem, Straight. 5% openness factor; color to match shades installed in Phase 1.

Porter Neuroscience Research Center Phase II PERKINS+WILL National Institutes of Health Project No. NIH - HQC90156 GMP Bid Proposal Set 01/29/10

ROLLER SHADES

12 494-2

b. Rollers: Removable spline fitting integral channel in tube for attaching shade material; one roller shade band per roller.

c. Direction of Roll: Regular, from back of roller.

d. Mounting Brackets: Finished to match fascia or headbox.

e. Pocket-Style Headbox: U-shaped; bottom cover with slot opening, extruded aluminum to match curtain wall.

f. Bottom Bar: Concealed, by pocket of shade material, internal-type bottom bar, concealed weight.

g. Audiovisual Light-Blocking Shades: Blackout shade assembly designed for light-tight joints.

h. Mounting: Hold-Down Brackets and Hooks or Pins.

i. Shade Operation: Manual; with continuous loop bead chain lift operator.

j. Sill Length

k. Shadecloth fabric: from standard line of colors, for architect selection

l. Installs on all “Exterior” windows throughout project. On windows also receiving Black-Out shades, rolls to mounted with “black-out shade closest to window

2. Roller Shades – Black out:

a. Shade Band Material: PVC-coated polyester; Material Width, 60 inches (1520 mm); Bottom Hem, Straight.

b. Rollers: Removable spline fitting integral channel in tube for attaching shade material; one roller shade band per roller.

c. Direction of Roll: Regular, from back of roller.

d. Mounting Brackets: Finished to match fascia or headbox.

e. Pocket-Style Headbox: U-shaped; bottom cover with slot opening, extruded aluminum to match curtain wall.

f. Bottom Bar: Concealed, by pocket of shade material, internal-type bottom bar, concealed weight.

g. Audiovisual Light-Blocking Shades: Blackout shade assembly designed for light-tight joints.

h. Mounting: Hold-Down Brackets and Hooks or Pins.

i. Shade Operation: Manual; with continuous loop bead chain lift operator.

j. Sill Length

k. Shadecloth fabric: from standard line of colors, for architect selection

END OF SECTION