Attachment 8 2301-3961_Large-SBDC_Orig.pdf

D

C

B

A

Decimals:

X.X = ±0.125

X.XX= ±0.06

X.XXX = ±0.031

X.XXXX = ±0.0156

Fractions = ±1/8 Angles = ±1°

Sheet 1 of 6

Large SBDC - Modified

NTS Orig

O ri g La rg e

S B

D C

M od ifi ed

-3

Unless otherwise specified, dimensions are in inches.

Drawing dimensional and geometric tolerances per ASME Y14.5M-1994

FILE PATH

NO DEVIATIONS SHALL BE MADE

WITHOUT CODE 2370 APPROVAL

PUGET SOUND NAVAL SHIPYARD

CODE 2370

ENGINEERING DIVISION

DRAWING NO.

TITLE

SCALE

FSR

REV.

D W

G . N

O

T

IT

LE

R

E V

S

H E

E T

CHECKED

DRAWN

DRAWN

DESIGNED

BRANCH

SUPV.

SIGNATURE DATE

CONCURRENCE

SIGNATURE DATE

APPROVAL

CODE

RF #

D

C

B

A

2301-3961

/S/ SIGNATURE ON FILE

C/2370.21

C/2380.4R

RF-2202

C/2380.1

A.D.C REVIEW

SIGNATURE DATE

DISTRIBUTION STATEMENT "D": DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF

DEFENSE AND U.S. DOD CONTRACTORS ONLY FOR ADMINISTRATIVE AND OPERATIONAL USE.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO PUGET SOUND NAVAL

SHIPYARD AND INTERMEDIATE MAINTENANCE FACILITY, BREMERTON, WA 98314.

GENERAL NOTES

1. THIS DRAWING PROVIDES THE NECESSARY INFORMATION TO MODIFY ONE (1) LARGE SBDC THAT WAS

PREVIOUSLY MANUFACTURED USING PSNS DWG 2370-2202 (REVISION C) AND UPGRADE THE

CONTAINER TO THE CONFIGURATION SPECIFIED IN PSNS DWG 2370-2202 (REVISION D). SEE SHEET 6 FOR ALL OF THE NECESSARY MODIFICATIONS REQUIRED. A TOTAL OF 36 LARGE SBDC’S WILL BE

MODIFIED PER THIS DRAWING.

2. WHERE MIL-SPECS, STANDARDS, TECHNICAL PUBLICATIONS, REFERENCE DRAWINGS, ARE NOTED ON THE DRAWING, THE LATEST REVISIONS SHALL BE IN EFFECT UNLESS A SPECIFIC REVISION IS

SPECIFIED.

3. MANUFACTURING REQUIREMENTS .

A. UNLESS SPECIFIED OTHERWISE ON THE DRAWING, ALL DIMENSIONS ARE IN INCHES AND ALL

TOLERANCES SHALL BE SPECIFIED IN THE DRAWING BLOCK IN THE LOWER RIGHT CORNER OF

THE DRAWING. GEOMETRIC DIMENSIONING AND TOLERANCE (GD&T) ARE PER ANSI/ASME Y14.5M

– 1994.

B. BREAK ALL SHARP EDGES TO A 1/32" CHAMFER (MINIMUM) AND REMOVE ALL WELD SPLATTER

FROM EXPOSED SURFACES.

C. MATERIAL SUBSTITUTIONS ARE AUTHORIZED PROVIDED THE SUBSTITUTION MATERIAL MEETS OR

EXCEEDS THE MECHANICAL/PHYSICAL PROPERTIES AND SATISFIES THE DIMENSIONAL

REQUIREMENTS OF THE MATERIAL BEING SUBSTITUTED. ENSURE THAT ANY SUBSTITUTIONS

MADE DO NOT INTRODUCE ANY HAZARDOUS OR REGULATED MATERIALS.

D. WHEN MATERIAL SIZE, LENGTH OR SHAPE IS NOT AVAILABLE PER THIS DRAWING, MATERIAL

SHALL BE PIECED AS REQUIRED TO OBTAIN REQUIRED AMOUNTS. JOINT DETAILS SHALL

PROVIDE FULL PENETRATION. SEAL ALL SEAMS BETWEEN WELDED PIECES WITH 1/8" SEAL

WELDS UNLESS NOTED OTHERWISE. GRIND ALL SPLICE WELDS FLUSH.

E. WHEN GRINDING THE BEVEL WELD BETWEEN PC-3 AND PC-6/5, ENSURE THAT THERE IS A

SMOOTH TRANSITION BETWEEN THE TWO PARENT MATERIALS.

F. UPON COMPLETION OF FABRICATION, MEASURE AND RECORD THE WEIGHT OF THE LID

ASSEMBLY. ESTIMATED WEIGHT OF LID ASSEMBLY IS 375 LBS.

G. UPON COMPLETION OF FABRICATION, MEASURE AND RECORD THE (UNLOADED) WEIGHT OF THE

ENTIRE SBDC ASSEMBLY (INCLUDING THE LID). ESTIMATED WEIGHT OF ENTIRE ASSEMBLY IS

4000 LBS.

H. LIFT HOLE OF PC-13 SHALL NOT BE MANUFACTURED BY FLAME-CUTTING OR OTHER THERMAL PROCESS WHICH WOULD RESULT IN EXCESSIVELY ROUGH SURFACE ON THE INSIDE OF THE LIFT

HOLE. FLAME-GOUGES OR LASER PIERCE MARKS ON THE INSIDE SURFACE LIFT HOLE WILL BE

REQUIRED TO BE REWORKED/MACHINED TO PASS SUBSEQUENT NDT INSPECTIONS, IN ORDER TO

CERTIFY THIS LIFT LUG. THE CONTRACTOR IS RESPONSIBLE FOR ENSURING PROPER NDT

INSPECTION, WHICH INCLUDE THE INSIDE LIFT HOLE SURFACE, PER NAVSEA TECHNICAL

PUBLICATION T9074-AS-GIB-010/271 (REV 1) AND MIL-STD-2035A.

I. SERIALIZE EACH LID AND CONTAINER WITH THE NUMBERS PROVIDED BELOW:

1) 097 THRU 108 (12 CONTAINERS)

2) 113 THRU 124 (12 CONTAINERS)

3) 129 THRU 140 (12 CONTAINERS)

J. LOAD INDICATING DEVICES AND SCALES USED TO PERFORM WEIGHT RECORDS AND VERIFY TEST

LOADS SHALL BE CALIBRATED TO +/- 1% ACCURRACY.

4. WELDING REQUIREMENTS.

A. WELDING SHALL BE PERFORMED TO ANSI/AWS D1.1 (REFERENCE A) AND BY ANSI/AWS D1.1

QUALIFIED WELDERS.

B. WELD SYMBOLS SHOWN ARE IN ACCORDANCE WITH ANSI/AWS A2.4 (REFERENCE B).

C. VISUAL INSPECT ALL WELDS IN ACCORDANCE WITH ANSI/AWS D1.1.

D. WELDED SURFACES SHALL BE FREE OF CRACKS, CRATERS, BURRS, SHARP EDGES, WELD

SPATTER AND DEFECTS. THE WELD SURFACE WILL BE GENERALLY SMOOTH TO THE TOUCH.

E. WELD SIZES IN THIS DRAWING ARE THE MINIMUM ACCEPTABLE. MINIMUM BEVEL ANGLE ON ALL

BEVEL WELDS ARE 45-DEGREES PER SINGLE BEVEL.

F. WELDS SHALL BE SEQUENCED TO MINIMIZE DISTORTION. WHERE DISTORTION DOES OCCUR,

STRAIGHTENING PER ANSI/AWS D1.1 SHALL BE PERFORMED TO ACHIEVE TOLERANCES OF THE

DRAWING.

5. LOAD TEST REQUIREMENTS OF CONTAINER LIFT LUGS:

A. PRIOR TO AND AFTER THE LOAD TEST, PERFORM A VT (VISUAL) TEST INSPECTION OF THE ATTACHMENT WELDS OF EACH LIFT LUG (PC-13) AS WELL AS THE ACCESSIBLE BASE METAL OF

EACH LIFT LUG (PC-13). ENSURE NO APPARENT DEFORMATION, CRACKS OR OTHER APPARENT

DAMAGE OF THESE LOAD BEARING PARTS.

B. PRIOR TO AND AFTER THE LOAD TEST, PERFORM A MT (MAGNETIC PARTICLE) TEST INSPECTION

OF THE ATTACHMENT WELDS OF EACH LIFT LUG (PC-13) AS WELL AS THE ACCESSIBLE BASE

METAL OF EACH LIFT LUG (PC-13) PER NAVSEA PUBLICATION T9074-AS-GIB-010/271 (REV 1) (REFERENCE C). USE THE ACCEPTANCE CRITERIA OF MIL-STD-2035A (REFERENCE D), CLASS 3

FOR WELDS AND FORGINGS/WROUGHT MATERIAL FOR BASE MATERIAL.

C. PROOF LOAD TEST THE LIFT LUGS AS FOLLOWS: RESTRAIN THE SBDC (DO NOT USE PC-16 AS A

RETRAINING SURFACE ) OR USE TEST WEIGHTS AS NECESSARY TO TEST BOTH PADEYES

SIMULTANEOUSLY TO 9,000 LBS (150% LOAD TEST) TO 9,300 LBS (155% LOAD TEST). THE LOAD TEST PLAN IS SHOWN IN VIEW A-22. HOLD THE TEST LOAD FOR A MINIMUM OF TEN MINUTES.

D. FOLLOWING SATISFACTORY COMPLETION OF LOAD TEST, DOCUMENT AND PROVIDE

CERTIFICATION OF LOAD TESTING AND MT TESTING (INCLUDE THE TEST DATES). ENSURE

DOCUMENTATION CLEARLY SPECIFIES PERFORMANCE OF “PRE ” AND “POST” LOAD NDT’S,

METHOD USED (NAVSEA PUBLICATION T9074-AS-GIB-010/27 1 (REV 1) REQUIRED), ACCEPTANCE

CRITERIA USED (MIL-STD-2035A REQUIRED), AND ITEMS ( PIECES AND WELDS) THAT WERE

INSPECTED.

E. CONTRACTOR(S) PERFORMING NDT PROCEDURES IN ACCORDANCE WITH REFERENCE C ARE

REQUIRED TO DEVELOP AND MAINTAIN THEIR OWN WRITTEN PROCEDURE. SEE NOTE 13 FOR

REQUIREMENTS.

6. LOAD TEST REQUIREMENTS OF LID LIFT HOLE:

A. THE 1/2" DIAMETER LIFT HOLE ON TOP OF THE LID (IN PC-1) IS SIZED FOR A 1/2-13 UNC SAFETY HOIST RING (WITH A 0.78” THREAD ENGAGEMENT LENGTH). FOR THE LIFT HOLE, PERFORM THE

TORQUE-BASED PROOF LOAD TEST AND NDT PER PSNS DWG 2301-3411 (REFERENCE E).

B. FOLLOWING SATISFACTORY COMPLETION, DOCUMENT, PROVIDE CERTIFICATION OF LOAD

TESTING (PER NOTE 5.D) AND THAT THIS LIFT HOLE MEETS THE ACCEPTANCE CRITERIA OF

REFERENCE E, STEP F AND G.

7. CLEANLINESS REQUIREMENTS:

A. BEFORE AND AFTER PAINTING, ENSURE ALL ACCESSIBLE SURFACES ARE VISIBLY FREE OF

CUTTING FLUID, TAPE RESIDUE, MACHINE CHIPS, GREASE, OIL, FLUX, DIRT, GRIT, SCALE, RUST, SMEARED METAL, WELD SPLATTER, PREVIOUSLY APPLIED PAINT, OR ANY OTHER FOREIGN

MATERIAL. PAY SPECIAL ATTENTION TO THE INSIDE OF THE CONTAINER, ENSURE THERE IS NO

SHARP EDGES OR SHARP PROTRUSIONS THAT COULD POTENTIALLY PIERCE OR RIP PLASTIC

WRAPPINGS/PACKAGING-MATERIAL, AT A LATER TIME DURING THE LOADING OF ITEM(S) INTO THE

SBDC.

8. PAINTING REQUIREMENTS.

A. GENERAL: PAINT ALL EXPOSED METAL SURFACES, INCLUDING THE INSIDE SURFACES OF THE

SBDC, EXCEPT AS FOLLOWS: DO NOT PAINT THREADED PORTIONS OF FASTENERS OR HOLES.

B. PREPARATION, APPLICATION, & INSPECTION OF THE PAINT: PREPARE THE CARBON STEEL

SURFACES BY DRY ABRASIVE BLASTING TO NEAR WHITE METAL PRIOR TO PAINTING. PROTECT

ALL THREADED HOLES FROM BLAST GRIT.

C. PAINT / COATING SYSTEM: PAINT STEEL SURFACES WITH TWO COATS OF PAINT CONFORMING TO MIL-PRF-23236. THE FIRST COAT SHALL BE RED, OR ALTERNATE COLOR, APPLIED TO A DRY FILM THICKNESS (DFT) OF 4 - 8 MILS. THE TOP COAT SHALL BE BLACK, APPLIED TO A DFT OF 4 - 8 MILS.

D. PAINT THE FOLLOWING INFORMATION ON PC-1 (IN THE LOCATION SHOWN IN VIEW D-24) USING 1/2”

TALL LETTERS, WITH A CONTRASTING COLOR TO THAT OF THE TOP-COAT:

LID LIFT HOLE

- FOR LIFTING OF LID ONLY -

SPS CAPACITY = 750 LBS.

NDT TEST DUE DATE: N/A, SF > 10:1

PSNS DWG 2301-3961

LID NUMBER = XXX [AS RECORDED IN NOTE 3.I]

E. PAINT THE FOLLOWING INFORMATION ON BOTH SIDES OF THE SBDC ON PC-7 NEAR PC-13 (IN THE

LOCATION SHOWN IN VIEW A-24) USING 1/2” TALL LETTERS, WITH A CONTRASTING COLOR TO THAT

OF THE TOP-COAT:

SPS CAPACITY = 3,710 LBS.

NDT TEST DUE DATE: N/A, SF > 10:1

UNLOADED WEIGHT = X,XXX LBS. [AS RECORDED IN NOTE 3G]

MAX LOADED WEIGHT = 6,000 LBS.

MIN. SLING LENGTH = 2 FT.

PSNS DWG 2301-3961

RF-2202

CONTAINER NUMBER = XXX [AS RECORDED IN NOTE 3.I]

F. PAINT A 2” DIAMETER CIRCLE ON THE UPPER RIGHT-HAND SIDE OF PC-7 ON ONE SIDE OF THE SBDC. (IN THE LOCATION SHOWN IN VIEW A-24) USING 1/2” TALL LETTERS, WITH A CONTRASTING

COLOR TO THAT OF THE TOP-COAT.

9. GASKET MATERIAL REQUIREMENTS: GASKET MATERIAL IS TO BE SILICONE RUBBER, COLOR RED, MEETING SPECIFICATION A-A-59588 (SUPERCEEDS ZZ-R-765), WITH A 60 OR 70 OR 80 DUROMETER.

SUGGESTED SOURCE FOR GASKET MATERIAL: SEALS UNLIMITED, BEAVERTON, OREGON, P.O.C. JACK

COURTNEY @ (503) 690-6644.

10. DESIGN OPTION: IF IT IS MORE ECONOMICAL TO USE ONE 2 3/4" THICK PLATE INSTEAD OF TWO THINNER PLATES (ONE 1 1/4" THICK AND ONE 1 1/2” THICK), THEN THE CONTRACTOR MAY MAKE THIS SUBSTITUTION. THIS DESIGN OPTION WILL BE ALLOWED FOR PIECES: 1 & 2, 4 & 5, 6 & 7, 8 & 9.

ATTACHMENT WILL BE 1/2" BEVEL WELDS, SAME WELD SYMBOL AS THAT SHOWN IN PANEL A-13.

PRIOR TO EXERCISING THIS OPTION, NOTIFY CODE 2370 ENGINEERING.

11. FINAL ASSEMBLY & CHECK-FIT: TO MAINTAIN THE SURFACE REQUIREMENTS OF THE FLANGE SURFACES, THE SBDC SHALL BE FULLY ASSEMBLED PRIOR TO SHIPMENT. AFTER THE PAINT HAS COMPLETELY DRIED, INSTALL GASKET AND LID, WITH ALL THE BOLTS (WITH PC-11’s) INSTALLED HAND- TIGHT. ENSURE THAT THE LID SITS FLAT ON THE GASKET AND THE FLANGE SURFACE OF PC-3, WITH

NOT VISIBLE GAPS BETWEEN PC-1, 10, OR 3.

12. PSNS HAS DESIGNED THIS CONTAINER TO MEET THE DESIGN CRITERIA OF 49CFR173.24, 173.24A, AND 173.410.

13. THE QUALIFIED NDT PLAN REQUIRED BY THE CONTRACTOR, SHALL:

A. BE A WRITTEN PROCEDURE DEVELOPED, MAINTAINED, AND QUALIFIED TO MEET THE

REQUIREMENTS OF REVISION 1 TO NAVSEA T9074-AS-GIB-010/271 (TP 271) (REFERENCE C) FOR

EACH METHOD PERFORMED.

B. CERTIFY THAT EACH APPLICABLE NON-DESTRUCTIVE TEST (NDT) PROCEDURE SPECIFIED FOR THE RF-2202 LARGE SBDC IS IN ACCORRDANCE WITH THE REQUIREMENTS OF REFERENCE C. THE

CERTIFICATION STATEMENT FOR COMPLIANCE WITH REFERENCE C NEEDS TO BE INCLUDED AS

PART OF THE WRITTEN PROCEDURE USED FOR PERFORMING THE NDT AND MUST BE SIGNED BY

THE COGNIZANT EXAMINER OF THE ACTIVITY (CONTRACTOR). THE COGNIZANT EXAMINER MUST

BE EQUIVALENT TO A LEVEL III EXAMINER PER AMERICAN SOCIETY OF NON-DESTRUCTIVE

TESTING (ASNT) SNT-TC-1A.

C. BE BASED ON USE OF ACCEPTANCE CRITERIA OF MIL-STD-2035A; NONDESTRUCTIVE TESTING

ACCEPTANCE CRITERIA FOR NDT'S PERFORMED IN ACCORDANCE WITH QUALIFIED PLAN.

References

A. AWS D1.1/D1.1M; Structural Welding Code.

B. AWS A2.4: Standard Symbols For Welding, Brazing and Nondestructive

Examination.

C. NAVSEA Technical Publication T9074-AS-GIB-010/271 (TP-271) Revision 1;

Requirements For Nondestructive Testing Methods.

D. MIL-STD-2035A; Nondestructive Testing Acceptance Criteria.

E. PSNS Drawing 2301-3411 (REV. F); Torque-based Proof Test for Safety Hoist Ring

Lift Holes.

F. PSNS Drawing 2370-2202 (REV. D); Large SBDC

Concurred in Reference F. See General Note 1.

Concurred in Reference F. See General Note 1.

Concurred in Reference F. See General Note 1.

/S/ Mark Shamion 3-11-19

/S/ Mark Schroder 3-11-19 /S/ R.G. Smith 3-11-19

/S/ Mark Shamion 3-11-19

/S/ Mark Shamion 3-11-19

B

A

Decimals:

X.X = ±0.125

X.XX= ±0.06

X.XXX = ±0.031

X.XXXX = ±0.0156

Fractions = ±1/8 Angles = ±1°

Sheet 2 of 6

Large SBDC - Modified

NTS Orig

O ri g La rg e

S B

D C

M od ifi ed

-3

Unless otherwise specified, dimensions are in inches.

Drawing dimensional and geometric tolerances per ASME Y14.5M-1994

NO DEVIATIONS SHALL BE MADE

WITHOUT CODE 2370 APPROVAL

PUGET SOUND NAVAL SHIPYARD

CODE 2370

ENGINEERING DIVISION

DRAWING NO.

TITLE

SCALE

FSR

REV.

D W

G . N

O

T

IT

LE

R

E V

S

H E

E T

RF #

D

C

B

A

2301-3961 RF-2202

A-7

DETAIL A-7

25.25

22.25

20.00

17.00

2.62

2.62

1.38

6.50

13.00

19.50

1.38

7.50 15.00

22.50

O 1.062

1.00012 X THRU

VIEW C-10

GASKET

EXPLODED ASSEMBLY VIEW A-8

VIEW B-6

LID ASSEMBLY

PC # QTY NAME DESCRIPTION AND SIZE MATERIAL

MATERIAL SPECIFICATION GRADE,

TYPE, CLASS, ETC. MATL LVL. REMARKS

1 1 UPPER LID PLATE 61.2# (1 1/2" THK) x 22 1/4" x 25 1/4" STEEL ASTM A36 OR BETTER N / A 2 1 LOWER LID PLATE 61.2# (1 1/2" THK), 16 1/2" x 19 1/2" STEEL ASTM A36 OR BETTER 3 1 LID FLANGE PLATE 102# (2 1/2" THK) x 22 1/4" x 25 1/4" STEEL ASTM A36 OR BETTER 4 2 NARROW OUTER PLATE PLATE 51# (1 1/4" THK) x 21" x 45" STEEL ASTM A36 OR BETTER 5 2 NARROW INNER PLATE PLATE 61.2# (1 1/2" THK) x 18 1/4" x 43 1/2" STEEL ASTM A36 OR BETTER 6 2 WIDE INNER PLATE PLATE 61.2# (1 1/2" THK) x 21 1/4" x 43 1/2" STEEL ASTM A36 OR BETTER 7 2 WIDE OUTER PLATE PLATE 51# (1 1/4" THK) x 24" x 45" STEEL ASTM A36 OR BETTER 8 1 INNER BOTTOM PLATE PLATE 61.2# (1 1/2" THK) x 19 3/4" x 22 3/4" STEEL ASTM A36 OR BETTER 9 1 OUTER BOTTOM PLATE PLATE 51# (1 1/4" THK) x 22 1/4" x 25 1/4" STEEL ASTM A36 OR BETTER 10 1 GASKET 3/8" THK x 22 1/4" x 25 1/4" RUBBER, SILICONE, RED A-A-59588 (SUPERCEEDS ZZ-R-765) 60 TO 80 DUROMETER

11 12 CLOSURE WASHER 3/4" PLAIN WASHER STEEL ASTM F436 TYPE 1 OR BETTER

12 12 CLOSURE BOLT HEX CAP SCREW 3/4-10 UNC x 2 3/4" L STEEL SAE GRADE 5 OR BETTER 13 2 LIFT LUG PLATE 40.8# (1" THK) x 4 1/4" x 11 1/4" STEEL ASTM A36 OR BETTER 14 1 PLUG BOLT HEX BOLT 1/2-13 UNC x 1/2" L STEEL SAE GRADE 5 OR BETTER 15 4 SECURITY TAB PLATE 10.2# (1/4" THK) x 1" x 1 1/4" STEEL ASTM A36 OR BETTER 16 2 FORK POCKET RECTANGULAR HSS (14" x 4" x 3/16") STEEL ASTM A500 GR B OR BETTER

List of Materials

5/8

16.500 +0.000 -0.125

19.500 +0.000 -0.125

2.88

2.88

7.500

15.000 22.500

1.375

1.375

6.500

13.000

19.500

12.62

25.25

22.25

11.12

1/2 - 13 UNC 2B

` MIN 1.00 FULL THD

O .812 +0.063

-0.00012X THRU

l O 0.030 M A B C

C

B

A r 0.015

FLANGE

SURFACE

CENTER PC-2

ONTO PC-1

(WITHIN +/- 1/16"

FROM EACH EDGE)

MINIMUM

STOCK

FOR FULL

CLEAN UP

TYP

PC-15 TO PC-1(1/8)

.125 -0.000

PC 2 TO

PC 1 (1/4)

- INDICATES MATERIAL THAT NEEDS TO BE PROCURED FOR THIS MODIFICATION.*

B

A

Decimals:

X.X = ±0.125

X.XX= ±0.06

X.XXX = ±0.031

X.XXXX = ±0.0156

Fractions = ±1/8 Angles = ±1°

Sheet 3 of 6

Large SBDC - Modified

NTS Orig

O ri g La rg e

S B

D C

M od ifi ed

-3

Unless otherwise specified, dimensions are in inches.

Drawing dimensional and geometric tolerances per ASME Y14.5M-1994

NO DEVIATIONS SHALL BE MADE

WITHOUT CODE 2370 APPROVAL

PUGET SOUND NAVAL SHIPYARD

CODE 2370

ENGINEERING DIVISION

DRAWING NO.

TITLE

SCALE

FSR

REV.

D W

G . N

O

T

IT

LE

R

E V

S

H E

E T

RF #

D

C

B

A

2301-3961 RF-2202

B-11 B-11

B-15

B-15

SECTION B-15 SECTION B-11

D-14

DETAIL D-14

A-14

DETAIL A-14

VIEW D-13

TOP VIEW OF CONTAINER

(1/8)

TYP

PC-4 TO PC-5

& PC-6 TO PC-7

G

(1/2)

TYP

PC-3 TO PC-4/7

(1/4)

TYP

PC-3 TO PC-6/5

SEE NOTE 3E

G

5 4

4 4

6 5

TYP

PC-8 TO PC-5/6(1/4)

G

1 - 5

TYP

PC-9 TO PC-4/7(1/2)

TYP

PC-13 TO PC-7 (3/8)

(3/8)

1/4

1/4

TYP

PC-13 TO PC-7 (1/4)

TYP

PC-13 TO PC-7(3/8)

MT

MT

MT

37 1/4 37 1/8

TYP

TYP

PC-9 TO PC-16 (3/16)

(3/16)TYP

PC-16 TO PC-16 (3/16)

.50 (TYP BOTH SIDES)

45 1/4 44 3/4

(CONTAINER

DEPTH)

CL

28.00

26.25

BREAK ALL SHARP EDGES

AT HSS OPENINGS, BOTH SIDES

LOCATE SEAMS OF

HSS ON BOTTOM

B

A

Decimals:

X.X = ±0.125

X.XX= ±0.06

X.XXX = ±0.031

X.XXXX = ±0.0156

Fractions = ±1/8 Angles = ±1°

Sheet 4 of 6

Large SBDC - Modified

NTS Orig

O ri g La rg e

S B

D C

M od ifi ed

-3

Unless otherwise specified, dimensions are in inches.

Drawing dimensional and geometric tolerances per ASME Y14.5M-1994

NO DEVIATIONS SHALL BE MADE

WITHOUT CODE 2370 APPROVAL

PUGET SOUND NAVAL SHIPYARD

CODE 2370

ENGINEERING DIVISION

DRAWING NO.

TITLE

SCALE

FSR

REV.

D W

G . N

O

T

IT

LE

R

E V

S

H E

E T

RF #

D

C

B

A

2301-3961 RF-2202

LC

LC

LC

LC

1.375

7.500

15.000

22.500

1.375

16.75 +0.250 -0.000

6.500

13.000

19.500

22.25

2.75

25.25

19.75 +0.250 -0.000

2.75

.75

R .50

O .50

2.25

3.00

4.50

2.25

9.00 10.00

O 1.00

THRU

43°

R 1.50

O 1.75

THRU

2X 45v X 0.25

F E

C-18

DETAIL C-18

5/8

A-18 A-18

SECTION A-18

16.750 +0.250 -0.000

19.750 +0.250 -0.000

MINIMUM

STOCK

FOR FULL

CLEAN UP

.125

.000

12X 3/4-10 UNC-2B

`MIN 1.00 FULL THD

l O 0.030 M D E F

VIEW D-20

TOP VIEW OF LID FLANGE

VIEW A-20

FRONT VIEW OF CONTAINER

WITH LID REMOVED

VIEW D-18

LID FLANGE (PC-3) SHOWN WITHOUT THE

REST OF THE CONTAINER FOR CLARITY

VIEW B-16

LIFT LUG

VIEW D-16

SECURITY TAB

TYP

PC-5 TO PC-6 (1/4) 1 - 10

G

TYP

PC-5 TO PC-6 (1/4)

G

1 - 10 TYP

PC-4 TO PC-7(1/2)

TYP

PC-4 TO PC-7(1/2)

D r 0.015

FLANGE

SURFACE

15 13 3 13

R 2.25

TYP

PC-15 TO PC-3(1/8)

SEE NOTE 3.H

B

A

Decimals:

X.X = ±0.125

X.XX= ±0.06

X.XXX = ±0.031

X.XXXX = ±0.0156

Fractions = ±1/8 Angles = ±1°

Sheet 5 of 6

Large SBDC - Modified

NTS Orig

O ri g La rg e

S B

D C

M od ifi ed

-3

Unless otherwise specified, dimensions are in inches.

Drawing dimensional and geometric tolerances per ASME Y14.5M-1994

NO DEVIATIONS SHALL BE MADE

WITHOUT CODE 2370 APPROVAL

PUGET SOUND NAVAL SHIPYARD

CODE 2370

ENGINEERING DIVISION

DRAWING NO.

TITLE

SCALE

FSR

REV.

D W

G . N

O

T

IT

LE

R

E V

S

H E

E T

RF #

D

C

B

A

2301-3961 RF-2202

VIEW A-22

PROOF LOAD TEST PLAN

OF LIFT LUGS

TES

T SLIN

G

LEN

G

TH

= 2 FT

3/4" SHACKLE

F = 9,000 LBF (150%)

9,300 LBF (155%)

SPS CAPACITY = 3,710 LBS.

NDT TEST DUE DATE: N/A, SF > 10:1

UNLOADED WEIGHT = X,XXX LBS.

MAX LOADED WEIGHT = 6,000 LBS.

MIN. SLING LENGTH = 2 FT.

PSNS DWG 2301-3961

RF-2202

CONTAINER NUMBER = XXX

REF

VIEW D-24

LABEL LAYOUT FOR LID LIFT HOLE

VIEW A-24

LABEL LAYOUT NEAR LUGS

(DUPLICATE ON BACKSIDE)

SEE NOTE 5.C

LAYOUT NEAR

UPPER RIGHT

HAND CORNER

SEE NOTE 8.F

LID LIFT HOLE

- FOR LIFTING OF LID ONLY -

SPS CAPACITY = 750 LBS.

NDT TEST DUE DATE: N/A, SF > 10:1

PSNS DWG 2301-3961

LID NUMBER = XXX

SEE NOTE 3.I.

SEE NOTE 3.I.

SEE NOTE 3.G.

B

A

Decimals:

X.X = ±0.125

X.XX= ±0.06

X.XXX = ±0.031

X.XXXX = ±0.0156

Fractions = ±1/8 Angles = ±1°

Sheet 6 of 6

Large SBDC - Modified

NTS Orig

O ri g La rg e

S B

D C

M od ifi ed

-3

Unless otherwise specified, dimensions are in inches.

Drawing dimensional and geometric tolerances per ASME Y14.5M-1994

NO DEVIATIONS SHALL BE MADE

WITHOUT CODE 2370 APPROVAL

PUGET SOUND NAVAL SHIPYARD

CODE 2370

ENGINEERING DIVISION

DRAWING NO.

TITLE

SCALE

FSR

REV.

D W

G . N

O

T

IT

LE

R

E V

S

H E

E T

RF #

D

C

B

A

2301-3961 RF-2202

ABRASIVE BLAST AND REPAINT

ENTIRE CONTAINER (INSIDE & OUT)

PER GENERAL NOTE 8.

VIEW A-28

REQUIRED MODIFICATIONS

FOR EXISTING LARGE SBDC's

REMOVE AND SCRAP EXISTING LID ASSEMBLY (PC 1 & 2).

MANUFACTURE NEW LID ASSEMBLY (PC 1 & 2) PER VIEW B- 6

REMOVE AND SCRAP EXISTING PADEYE (PC 13).

MANUFACTURE AND INSTALL NEW PADEYE (PC 13)

PER VIEW B-11 & B-16.

LOAD TEST PER GENERAL NOTE 5.

REMOVE AND SCRAP EXISTING PADEYE (PC 13).

MANUFACTURE AND INSTALL NEW PADEYE (PC 13)

PER VIEW B-11 & B-16.

LOAD TEST PER GENERAL NOTE 5.

REMOVE EXISTING LID FLANGE (PC 3).

MANUFACTURE AND INSTALL

NEW LID FLANGE (PC 3) PER

VIEW D-18 AND DETAIL VIEW D-14.

REMOVE AND SCRAP EXISTING FASTENERS (PCs 11, 12, & 4) INSTALL NEW FASTENERS ( PCs 11, 12, & 4)

SEE LIST OF MATERIALS ON SHEET 2.

APPLY NEW LABEL INFORMATION

PER VIEW D-24

APPLY NEW LABEL INFORMATION

PER VIEW A-24. TYP 2 PLCS

SCRAP EXISTING GASKET (PC 10).

MANUFACTURE NEW GASKET (PC 10)

PER VIEW C-10.

LOAD TEST LID LIFT HOLE

PER GENERAL NOTE 6

REMOVE AND SCRAP SECURITY TABS (PC 15)

MANUFACTURE AND INSTALL NEW SECURITY

TABS (PC 15) PER DETAIL A-7 AND DETAIL C-18.

REMOVE AND SCRAP SECURITY TABS (PC 15)

MANUFACTURE AND INSTALL NEW SECURITY

TABS (PC 15) PER DETAIL A-7 AND DETAIL C-18.

NEW PC's REQUIRED: 1-3 & 10-15 EXISTING PC's NOT NEEDING REPLACEMENT: 4-9 &16