RFP_QandA_No._4_SUPPLY_18-R-4251.docx

MILITARY SEALIFT COMMAND

N32205-18-R-4251

USNS SUPPLY ROH/DD

QUESTIONS AND ANSWERS #4

The following are answers to questions received from potential offerors. The answers provide clarification only and do not constitute an amendment to the solicitation.

1. SPECIFICATION ITEM NO.: 615

PARAGRAPH / SECTION NO: 2.4

TITLE: Deck repair-Main Scullery

QUESTION:

Could you please provide specified drawing No. 6361516

ANSWER:

Sending along with answer

2. SPECIFICATION ITEM NO.: ___555__________________

PARAGRAPH / SECTION NO:__Reference 2.1.3__________________

TITLE: Install Oily Water Separator Unit

QUESTION:

Item 0555, reference 2.1.3, sheet 4 of 9 has the bill of materials required. Item S-14 notes quantity required as (432) for ½” plate, is this a typo? after review of the drawings we can only find a few brackets cut from ½” plate. Please advise.

Bid it as 3 SqFt (432 SqIn)

3. SPECIFICATION ITEM NO.: _914____________________

PARAGRAPH / SECTION NO:__Various__________________

TITLE: ___Propeller Shaft Installation Preparations_____________

QUESTION:

“Item 914 STBD Propulsion Shafting, para. 7.8 states to remove Port and Starboard main propulsion shafting systems.” Was not addressed in the amended ITEM 914a. It is just now para. 7.9 but remains basically the same.

The same thing is true about the next question in that e-mail;

Both Item 914, para 7.7.9.1 and 916 para. 7.15 state to remove the fiberglass coatings on removed shafts. Will there be a total of six (6) shafts?

Only the three removed STBD shafts require fiberglass removal.

Para 7.8 and 7.9 of WI916 (Not 914) have been updated.

Other corrections made. See updated WI’s