Attachment_1_-_DBWs.pdf

General Decision Number: NM140025 01/03/2014 NM25

Superseded General Decision Number: NM20130025

State: New Mexico

Construction Type: Building

County: Eddy County in New Mexico.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Modification Number Publication Date 0 01/03/2014

CARP1245-004 06/01/2012

Rates Fringes

Carpenter Metal Stud Installation Only........................$ 22.94 7.92

ELEC0611-018 01/01/2013

Rates Fringes

ELECTRICIAN (Excluding Low Voltage Wiring for Alarms) Zone A......................$ 28.35 9.63

Zone A shall be designated 12 miles from the Main Post Office of Artesia, Carlsbad, Hobbs and Lovington, New Mexico.

Zone B extending up to 10 miles beyond Zone A, shall receive $0.45 above Zone A wage rate.

Zone C extending up to 28 miles beyond Zone A, shall receive $0.60 above Zone A wage rate.

Zone D extending more than 28 miles beyond Zone A, shall receive $0.85 above Zone A wage rate.

* ENGI0953-007 06/01/2013

Rates Fringes

Power Equipment Operator

(2) Roller(Dirt and Grade Compaction).................$ 21.18 6.00

(4) Bobcat/Skid Loader, Loader (Front End)..........$ 21.97 6.00

(8) Crane...................$ 25.05 6.00

IRON0495-009 01/01/2012

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 25.57 11.73

IRONWORKER, STRUCTURAL (Metal Building Erection Only)..........$ 25.57 11.73

PLUM0412-007 04/01/2013

Rates Fringes

PIPEFITTER (Including HVAC Pipe Installation)...............$ 31.14 12.43 PLUMBER (Excluding HVAC Pipe Installation)....................$ 31.14 12.43

SHEE0049-012 04/01/2011

Rates Fringes

Sheet Metal Worker (HVAC Duct

4/1/2014http://www.wdol.gov/wdol/scafiles/davisbacon/NM25.dvb?v=0

ATTACHMENT 1 - DAVIS BACON WAGE DETERMINATIONS

HSFLAR-14-R-00002

and System Installation Only)....$ 30.17 14.89

SUNM2010-006 11/09/2010

Rates Fringes

BOILERMAKER......................$ 21.77 3.98

BRICKLAYER.......................$ 20.36 5.74

CARPENTER (Acoustical Ceiling Installation Only)...............$ 20.79 0.00

CARPENTER (Drywall Hanging Only)............................$ 21.39 2.85

CARPENTER (Form Work Only).......$ 19.79 6.14

CARPENTER, Excludes Acoustical Ceiling Installation, Batt Insulation, Drywall Hanging, Form Work, and Metal Stud Installation.....................$ 23.05 0.35

CEMENT MASON/CONCRETE FINISHER...$ 17.72 3.72

DRYWALL FINISHER/TAPER...........$ 19.64 2.75

ELECTRICIAN (Low Voltage Wiring for Alarms)...............$ 28.25 6.62

FLOOR LAYER: Carpet.............$ 22.31 0.30

GLAZIER..........................$ 20.15 3.95

INSULATOR - BATT.................$ 24.44 8.43

IRONWORKER, REINFORCING..........$ 20.84 7.68

IRONWORKER, STRUCTURAL,

Excludes Metal Building Erection.........................$ 22.20 8.06

LABORER: Common or General......$ 10.76 2.11

LABORER: Landscape & Irrigation.......................$ 10.60 0.24

LABORER: Mason Tender - Brick...$ 13.77 4.35

LABORER: Mason Tender - Cement/Concrete..................$ 11.51 0.85

LABORER: Pipelayer..............$ 13.78 2.20

OPERATOR: Backhoe...............$ 22.13 4.30

OPERATOR: Forklift..............$ 21.13 4.83

OPERATOR: Grader/Blade..........$ 21.39 4.94

PAINTER: Brush, Roller and Spray, Excludes Drywall Finishing/Taping.................$ 16.58 1.75

PLASTERER........................$ 17.65 7.15

ROOFER...........................$ 15.41 0.00

SHEET METAL WORKER, Excludes HVAC Duct and Unit Installation.....................$ 22.01 9.65

TILE FINISHER....................$ 14.02 0.00

TILE SETTER......................$ 19.00 0.00

TRUCK DRIVER: Dump Truck........$ 15.36 5.00

TRUCK DRIVER: Pickup Truck......$ 15.91 3.13

TRUCK DRIVER: Water Truck.......$ 16.25 5.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union.

Union Identifiers

An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters , PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable , i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination.

The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example.

Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rates.

0000/9999: weighted union wage rates will be published annually each January.

Non-Union Identifiers

Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union majority rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date.

Survey wage rates will remain in effect and will not change until a new survey is conducted.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

General Decision Number: NM140050 01/03/2014 NM50

Superseded General Decision Number: NM20130050

State: New Mexico

Construction Type: Highway

Counties: Catron, Chaves, Curry, De Baca, Eddy, Grant, Hidalgo, Lea, Lincoln, Luna, Otero, Roosevelt, Sierra and Socorro Counties in New Mexico.

HIGHWAY CONSTRUCTION PROJECTS (excluding tunnels, building structures in rest area projects & railroad construction;

bascule, suspension & spandrel arch bridges designed for commercial navigation, bridges involving marine construction;

and other major bridges).

Modification Number Publication Date 0 01/03/2014

* SUNM2011-004 08/26/2011

Rates Fringes

CARPENTER (Includes Form Work) Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Otero, Roosevelt, Sierra, Socorro..$ 13.93 0.44 Lea.........................$ 13.30 0.44 Luna........................$ 13.11 0.44

CEMENT MASON/CONCRETE FINISHER

Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Otero, Roosevelt, Sierra, Socorro..$ 14.17 0.55 Lea.........................$ 13.74 0.68

ELECTRICIAN (Including Traffic Signalization) Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Otero, Roosevelt, Sierra, Socorro..$ 26.21 9.35 Lea.........................$ 24.90 8.56

HIGHWAY/PARKING LOT STRIPING:

Includes Highway Line/Parking Lot Line Striping and Line Striping Truck Driver............$ 15.93 0.35

INSTALLER: (Guardrails, Handrails and Signs) Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Otero, Roosevelt, Sierra, Socorro..$ 13.58 0.35 Lea.........................$ 14.62 0.30

IRONWORKER, REINFORCING/REBAR

Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Otero, Roosevelt, Sierra, Socorro..$ 21.66 6.03 Lea.........................$ 21.77 6.03

IRONWORKER, STRUCTURAL...........$ 21.77 6.03

LABORER

Asphalt Raker...............$ 13.00 0.35 Common or General Catron, Chaves, Curry, Hidalgo, Lincoln, Sierra, Socorro....................$ 11.67 0.35 DeBaca.....................$ 11.33 0.35

4/1/2014http://www.wdol.gov/wdol/scafiles/davisbacon/NM50.dvb?v=0

Eddy.......................$ 11.78 0.35 Grant......................$ 10.62 0.35 Lea........................$ 11.61 0.35 Luna, Roosevelt............$ 12.56 0.35 Otero......................$ 12.73 0.35 Flagger/Cone Setter.........$ 12.56 0.35 Grade Checker...............$ 16.18 1.60 Mason Tender- Brick/Cement/Concrete.......$ 11.39 0.79 Pipelayer...................$ 19.28 Power/Air Tool Operator, Includes Jack Hammer........$ 13.91 0.86

PAINTER (Brush, Roller, and Spray)...........................$ 15.41 0.44

POWER EQUIPMENT OPERATOR:

Asphalt/Concrete Paver, Laydown Machine, and Plant..$ 15.42 0.26 Backhoe/Excavator/Trackhoe Catron, Chaves, Curry, DeBaca, Grant, Hidalgo, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro.$ 19.92 0.26 Eddy.......................$ 14.87 0.26 Lea........................$ 16.88 0.26 Bobcat/Skid Loader..........$ 18.06 0.26 Broom.......................$ 15.48 0.26 Bulldozer...................$ 16.25 0.26 Crusher.....................$ 16.53 0.26 Distributor.................$ 14.50 0.26 Forklift....................$ 17.16 0.26 Grader/Blade................$ 18.02 0.26

Loader (Front End)..........$ 16.12 0.26 Mechanic Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro....................$ 19.44 0.26 Lea........................$ 20.69 0.26 Milling Machine.............$ 16.59 0.26 Oiler.......................$ 15.79 0.26 Piledriver..................$ 17.82 0.26 Roller (Asphalt, Dirt, and Sheepsfoot) Catron, Chaves, Curry, Eddy, Grant, Hidalgo, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro.$ 15.86 0.26 DeBaca.....................$ 14.19 0.75 Lea........................$ 17.41 0.26 Scraper.....................$ 15.91 0.26 Screed......................$ 15.70 0.26 Tractor.....................$ 15.40 0.26 Trencher....................$ 16.31 0.26

TRUCK DRIVER

Distributor Catron, Chaves, Curry, DeBaca, Grant, Hidalgo, Lea, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro....................$ 13.81 0.26 Eddy.......................$ 13.70 0.26 Dump Truck Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro....................$ 14.60 0.26 Lea........................$ 14.61 0.26 Flatbed Truck Catron, Chaves, Curry, DeBaca, Grant, Hidalgo, Lincoln, Luna, Otero, Sierra, Socorro............$ 12.96 0.26 Eddy.......................$ 12.71 0.26 Lea........................$ 13.05 0.26

Roosevelt..................$ 13.26 0.26 Pickup and Pilot Car Catron, Chaves, Curry, DeBaca, Grant, Hidalgo, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro.$ 12.70 0.26 Eddy.......................$ 12.60 0.26 Lea........................$ 12.84 0.26 Semi-Trailer Truck..........$ 16.58 0.26 Tractor Haul Truck..........$ 14.00 Water Truck Catron, Chaves, Curry, DeBaca, Eddy, Grant, Hidalgo, Lincoln, Luna, Otero, Roosevelt, Sierra, Socorro....................$ 14.39 0.26 Lea........................$ 15.07 0.26

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union.

Union Identifiers

An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters , PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable , i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination.

The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example.

Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rates.

0000/9999: weighted union wage rates will be published annually each January.

Non-Union Identifiers

Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union majority rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date.

Survey wage rates will remain in effect and will not change until a new survey is conducted.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

General Decision Number: NM140012 02/14/2014 NM12

Superseded General Decision Number: NM20130012

State: New Mexico

Construction Type: Heavy

Counties: De Baca, Eddy, Grant, Hidalgo, Lea, Lincoln, Luna, Roosevelt, Sierra and Socorro Counties in New Mexico.

HEAVY CONSTRUCTION PROJECTS

Modification Number Publication Date 0 01/03/2014 1 02/14/2014

* ELEC0583-006 12/01/2013

HIDALGO AND LUNA COUNTIES

Rates Fringes

ELECTRICIAN......................$ 28.80 7.87

ELEC0611-002 01/01/2013

DE BACA, GRANT, LINCOLN, ROOSEVELT, SIERRA & SOCORRO COUNTIES

Rates Fringes

ELECTRICIAN

ZONE 1......................$ 29.90 9.70

ZONE 1: Mileage calculated from the main post office in the following towns: Albuquerque-40 miles, Belen-12 miles, Carrizozo-12 miles, Clovis-12 miles, Espanola-14 miles, Farmington-6 miles, Gallup-10 miles, Las Vegas-8 miles, Los Lunas-12 miles, Portales-12 miles, Ratan-6 miles, Roswell-12 miles, Ruidoso-12 miles, Santa Fe-10 miles, Tucumcari-6 miles.

ZONE 2: Extending up to 20 miles beyond Zone 1, EXCEPT ALBURQUERQUE, shall receive 9% above Zone 1 rate.

ZONE 3: Extending up to 30 miles beyond Zone 1, EXCEPT ALBURQUERQUE, shall receive 15% above Zone 1 rate.

ZONE 4: Extending more than 30 miles beyond Zone 1, EXCEPT ALBURQUERQUE, shall receive 26% above Zone 1 rate.

ELEC0611-006 01/01/2013

EDDY & LEA COUNTIES

Rates Fringes

ELECTRICIAN

Zone A......................$ 28.35 9.63

Zone A shall be designated 12 miles from the Main Post Office of Artesia, Carlsbad, Hobbs and Lovington, New Mexico.

Zone B extending up to 10 miles beyond Zone A, shall receive $0.45 above Zone A wage rate.

Zone C extending up to 28 miles beyond Zone A, shall receive $0.60 above Zone A wage rate.

Zone D extending more than 28 miles beyond Zone A, shall receive $0.85 above Zone A wage rate.

IRON0495-004 01/01/2012

Rates Fringes

4/23/2014http://www.wdol.gov/wdol/scafiles/davisbacon/NM12.dvb?v=1

IRONWORKER

Structural..................$ 25.57 11.73

SUNM2009-006 09/14/2010

Rates Fringes

CARPENTER........................$ 22.26 6.20

IRONWORKER, REINFORCING..........$ 22.75 9.60

LABORER: Common or General......$ 12.37 0.00

LABORER: Flagger................$ 10.90 0.00

OPERATOR: Backhoe...............$ 14.03 0.00

OPERATOR: Grader/Blade..........$ 18.79 2.35

OPERATOR: Loader (Front End)....$ 22.07 5.05

OPERATOR: Scraper...............$ 14.03 0.00

PIPEFITTER.......................$ 25.64 11.31

PLUMBER..........................$ 26.27 7.69

TRUCK DRIVER: Dump Truck........$ 11.90 0.00

TRUCK DRIVER: Water Truck.......$ 13.72 5.25

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union.

Union Identifiers

An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters , PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable , i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination.

The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example.

Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rates.

0000/9999: weighted union wage rates will be published annually each January.

Non-Union Identifiers

Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union majority rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date.

Survey wage rates will remain in effect and will not change until a new survey is conducted.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION