AR1001C_C_01_stamp.pdf
PDF 3 MB Posted
- Attached to
- Wind Tunnel Compressor Rotor Blades Federal contract opportunity
- Solicitation number
- FA9101-17-R-1000
About this file
Drawing
View the file
Other files for this federal contract opportunity
Show all 50
Wind Tunnel Compressor Rotor Blades has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
26 . CONFORMANCE OF THE 2.803-2.811 YOKE GAP WIDTH SHALL BE VERIFIED BY INSERTING A
MINIMUM WIDTH "GO" GAGE BLOCK (DRAWING AT3201A) INTO THE YOKE TO THE MINIMUM
HUB CLEARANCE LINE. THE GAGE SHALL ENTER FREELY WITH NO RESISTANCE. WITH THE GAGE
BLOCK IN PLACE AND HELD TO ONE SIDE, THE PERIPHERY OF THE OPPOSITE SIDE SHALL BE
PROBED WITH A .009" FEELER GAGE. THE GAGE SHALL NOT ENTER BETWEEN THE GAGE BLOCK
AND YOKE WALL.
25 . BOND FN14 TO FN1 USING HYSOL EA9394 IN THE APPROXIMATE LOCATION SHOWN.SOLID GLASS BEADS MAY BE ADDED UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS.
28 . ANY EXPOSED SURFACES OF BUSHINGS (FN4) WHICH HAVE HAD THE PLATING REMOVE DURING
PROCESSING SHALL BE REWORKED USING HENKEL ALODINE (BONDERITE) 871 TOUCH-N-PREP
CONVERSION COATING. SURFACE PREPARATION AND APPLICATION PER MANUFACTURES
RECOMMENDATIONS.
27 . CONFORMANCE OF THE BUSHING-TO-BUSHING ALIGNMENT POSITIONAL TOLERANCE SHALL BE
VERIFIED (3 PLACES) BY INSERTING A 1.249" MINIMUM PIN GAGE THRU BOTH BUSHINGS
SIMULTANEOUSLY.
23 . ADDITIONAL 108FG MAY BE ADDED OR REMOVED BY SUBSEQUENT OPERATIONS. A MINIMUM
OF 1 PLY MUST REMAIN.
22 . MICRO-SHAVE FN4 AS REQUIRED TO FLUSH OR BELOW FLUSH.
21 . BREAK HOLE EDGES APPROX .03 X .03 INCH FOR FIT AT NEXT ASSEMBLY.
20 . NON-DESTRUCTIVE INSPECTION PER MPS-223 ON FN 1 ONLY. ZONE C < .50 THK < ZONE D.
19 . BUTT SPLICE PLIES AS SHOWN. MAXIMUM GAP .100 INCH.
18 . FINAL SPACER ASSEMBLY SHALL HAVE A WEIGHT OF 18.15 1.00 LBS.
17 . SEAL ALL EXPOSED COMPOSITE EDGES WITH HYSOL EA9396 ADHESIVE.
16 . BOND FN13 TO FN1 USING HYSOL EA9394 IN THE APPROXIMATE LOCATION SHOWN.SOLID GLASS BEADS MAY BE ADDED UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS.
15 . BOND FN12 TO FN1 USING HYSOL EA9394 IN THE APPROXIMATE LOCATION SHOWN. SOLID GLASS BEADS MAY BE ADDED UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS.
14 . DRILL VENT HOLES THRU FN5 IN APPROXIMATE AREA SHOWN (0.5" FROM FN5 EDGES) USING A
#39 DRILL BIT.
13 . [REMOVED]
12 . BREAK OUTER EDGE AS NEEDED FOR FIT AT NEXT ASSEMBLY.
11 . CROSS-SECTIONAL AREA TO BE FILLED WITH TYPE 1 GRADE 6 OR 12 FIBERS PER MMS-143
TO APPROXIMATELY 55% FV. BUTT-SPLICE AS NEEDED WITH A MAXIMUM GAP OF .100 INCH
IN THE APPROXIMATE CENTER OF EACH RIB.
10 . ALL PLY ORIENTATIONS APPLY TO THE PLANE OR SURFACE IN WHICH THEY ARE SHOWN.
9 . THIS ITEM IS DEFINED BY TWO DIMENSIONAL (2D) AND THREE DIMENSIONAL (3D) DATA.
THE UNDIMENSIONED PORTIONS OF THIS DRAWING ARE CONTAINED IN THE
3D DATA SET AR1001C-101.
8 . PROCESS FN1 PER MPS-222.
7 . IDENTIFY PART USING 1 TO 2 INCH TALL CHARACTERS WITH UNIQUE SERIAL
NUMBER, AND ASSEMBLY WEIGHT (LBS) IN THE LOCATIONS SHOWN USING KRYLON K01505,
HIGH HEAT SPRAY PAINT, WHITE. IDENTIFICATION SHALL BE IN ACCORDANCE WITH THE
FOLLOWING: C1-C-2XX WHERE 2XX IS THE UNIQUE SERIAL NUMBER. APPLY HYSOL EA9396 OR
PROSET LAM-151-HT COATING OVER PART MARKING.
6 . APPLY ADHESIVE TO ALL FAYING SURFACES.
5 . [REMOVED]
4 . POT FN4 TO FN9 IN POSITION SHOWN USING HYSOL EA9394 ADHESIVE. SOLID GLASS BEADS MAY
BE ADDED UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS.
3 . BOND FN5 TO FN10 USING HYSOL EA9394 ADHESIVE IN THE LOCATION SHOWN. SOLID GLASS BEADS MAY BE ADDED UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS.
2 . BOND FN2 AND FN3 TO FN1 USING HYSOL EA9394 ADHESIVE. SOLID GLASS BEADS MAY BE ADDED
UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS.
1 . DRAWING PER ASME Y14.5-2009.
NOTES:
1 1 AR1001C-103 SPACER BODY, ROW C
2 1 AR1002C-101 CLOSEOUT, UPSTREAM - ROW C
3 1 AR1002C-103 CLOSEOUT, DOWNSTREAM - ROW C
4 6 AT1001D BUSHING, SPACER INTERFACE
5 1 AT1004D-105 TELEMETRY TRAY, ROW C
6 AT1002D-111 SEAL, PRESSURE SIDE
7 AT1002D-113 SEAL, SUCTION SIDE
8 X 1 AR1001C-105 SPACER, ROW C - SUB ASSY
9 X 1 AR1001C-107 SPACER, ROW C - SUB ASSY
10 X 1 AR1001C-109 SPACER, ROW C - SUB ASSY
11 1 X AR1001C-111 SPACER, ROW C - SUB ASSY
12 2 AT1005D-115 ANGLE BRACKET
13 2 AT1005D-113 ANGLE BRACKET
14 4 AT1005D-117 ANGLE BRACKET
X AR1001C-101 SPACER, ROW C
-101 -105 -107 -109 -111 ITEM NUMBER DESCRIPTION
FIND NO. ASSY SUB ASSY SUB ASSY SUB ASSY SUB ASSY
24 . YOKE GAP MAY BE INSPECTED WITH UP TO 40 LB TOTAL APPLIED AT FASTENER LOCATIONS.
REV DESCRIPTION DATE
NC INITIAL RELEASE 5/18/12
A
IN BOM, FIXED TYPO- WAS "AT1001C-101", IS "AR1001C-101", ADDED
"AT1002D-107 (FN6) AND AT1002D-109 (FN7)", UPDATED FIND NUMBERS
THROUGHOUT DRAWING AND NOTES. NOTE 1-WAS "ASME Y14-5M DATED 1994" IS
"ASME Y14.5-2009".NOTE 2,3,4,15 & 16-ADDED "SOLID GLASS BEADS MAY BE
ADDED UP TO 0.5% BY WEIGHT OF ADHESIVE TO CONTROL BONDLINE THICKNESS".
NOTE 7- ADDED"1 TO" AND "APPLY FUEL RESISTANT COATING PER AMS-C-27725
OVER PART MARKING". NOTE 9- WAS "AR1001C" IS "AR1001C-101". NOTE 13-
ADDED "AND (1) FN7", REMOVED "TRIM EDGES TO MATCH SPACER CONTOUR
(INSIDE FILLETS ON UPSTREAM AND DOWN STREAM EDGES)", ADDED "SEAL EDGES
MUST TERMINATE AT OR BEFORE TANGENT OF EDGE FILLET". NOTE 14- ADDED
"THRU FN5". NOTE 20- REMOVED FLAGNOTE SYMBOL, ADDED "FN1 ONLY". NOTE
24- ADDED "YOKE", REMOVED "MAXIMUM". SH2, ZONE H5- WAS "2.2 MIN" IS
"2.5 MIN", ZONE F2- WAS 2.564 IS 2.524, ZONE B3- ADDED FLAGNOTE 3 & 6.
SH3, ZONE E6- ADDED "CHAMFER DETAILS", ZONE E3- ADDED "SECTION VIEW Z-
Z". SH4, ZONE E5-ADDED FLAGNOTE 6 TO VIEW NAME. SH6, ZONE D7 (DETAIL
B)- ADDED 7.01 AND 0.50 REF DIMS AND REMOVED "2X" FROM PLY DROP
SPACING. SH6, ZONE B6- ADDED DETAIL G.
6/10/13
B
IN BOM, ADDED AT1005D-117 (FN14), NOTE 7- REMOVED "PART NUMBER",
REPLACED "INK PER A-A-56032" WITH "KRYLON K01505, HIGH HEAT SPRAY
PAINT, WHITE", REPLACED "FUEL RESISTANT COATING PER AMS-C-27725" WITH
"HYSOL EA9396 OR PROSET LAM-151-HT COATING". NOTE 14- ADDED "0.5" FROM
FN5 EDGES"'ADDED NOTE 25 & 26, SH1, ZONE H8-ADDED -101 VIEW. ZONE C6-
ROTATED VIEW 180 DEG, ADDED PART MARKING. SH2, ZONE C2- ADDED (2)
ADDITIONAL DRILLED HOLES TO TRAY, SH4, ZONE E7- ADDED DETAIL H, UPDATED
VIEWS FOR FN 14.
7/31/14
C
REMOVED FN6 & FN7 THROUGHOUT. SH1, REMOVED NOTE 5 & 13. ADDED NOTE 27 &
28. SH2, ZONES B7 & D6- PROFILE TOLERANCE WAS " .030 .025",IS
" 0.070 .045". ZONE G2-ADDED "EXCEPT FN2 & FN3". ZONE C1- ADDED
0.120 FN2 ONLY. ZONE C4-ADDED .120 FN3 ONLY. SH3, ZONE C3-ADDED
FLAGNOTE 27 & 28. ZONE C6-ADDED FLAGNOTE 28.
12/1/14
A
B
C
D
SHEET 1 OF 10SCALE
SIZE CAGE CODE DWG NO REV
CO7CD8E
TITLE
AR1001C
1:2
MATRIX COMPOSITES INC.
275 BARNES BLVD
ROCKLEDGE, FL 32141
SPACER, ROW CDRAWN
APPROVALS ON FILE
APPROVED
ENGINEER
JAK 06/10/13
NEF 06/10/13
JAK 06/10/13
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIM ARE IN INCHES
ANGLE .5
X.X .1
X.XX .03
X.XXX .010
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
A
B
C
D
SHEETSCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
-101
EXPLODED VIEW
-101
-101
SCALE 1:4
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea se di st rib ut io n un lim ite d.
murphy Text Box Uncontrolled if printed.
Verify revision prior to use.
A
B
C
D
SHEET 2 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
22.863
12.633
.50( )
.50( )
-111
4X 14
3 6
.120 A D-E
FN2 ONLY
.120 A D-E
FN3 ONLY
A
A
4 29
3 33
VIEW A-A
.070 .045 A D-E 3 4
.070 .045 A D-E 1 2
2.750( )
22.863
107.875R
10.677R10.677R
.500R
2.524( ) 3.257
2.000
35 0
18.643
2.811 2.803
-111
4X
HUB CLEARANCE LINE
HUB CLEARANCE LINE (MIN)
22 24 26
.080 A D-E
ALL OVER
EXCEPT FN2 & FN3
35 0
19.230
-111
EXPLODED VIEW
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
B
C
D
SHEET 3 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
2.811 2.803( )
.7042X( )
1.718
-107
A
B
C1
3.000
3.000
2.750( )
-107
Y
Y
2.750
1.480 ±.0056X
-107
C1
.010 A B C 21
.3602X( )
.2002X( )
Section view Y-Y
PROJECTED INTERSECTION.250R2X( )
5.1982X( )
-107
CHAMFER DETAILS
-109
3.000
3.000
-109
E
.003 A D
INDIVIDUALLY
3X FN4 4 27 28
2.750
-109
D
.010 A B C
3X FN4 4 28
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
B
C
D
SHEET 4 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
-105 6
EXPLODED VIEW
-105
FN2 AND FN3 OMMITTED FOR CLARITY
H
-105
FN2 AND FN3 OMMITTED FOR CLARITY
-105
FN2 AND FN3 OMMITTED FOR CLARITY
3.02X
3.02X
1.02X
1.02X
Detail H
SCALE 1:1
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
SH5
Scale: 1:1
A
B
C
D
SHEET 5 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
1.917( )
3.095( )
7.378( )
5.950( )
3.734( )
5.965( )
5.769( )
12.633( )
22.789( )
-103
107.875R( )
A
-103
10.750R( )
10.750R( )
35( )
35( )
2.811 2.803( )
-103
B
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
SH6
Scale: 1:1
A
B
C
D
SHEET 6 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
MASTER PLY TABLE FOR AT1001C-103 23
PLY/PART ORD. ORIENTATION MATERIAL
P001 N/A Opt. 108 F/G
P002 A +/-45 MMS-144
P003 A 0/90 MMS-144
P004 A 0/90 MMS-144
P005 A +/-45 MMS-144
P006 A 0/90 MMS-144
P007 A +/-45 MMS-144
P008 A 0/90 MMS-144
P009 A 0/90 MMS-144
P010 A +/-45 MMS-144
P011 A +/-45 MMS-144
P012 A 0/90 MMS-144
P013 A +/-45 MMS-144
P014 A +/-45 MMS-144
P015 A 0/90 MMS-144
P016 A +/-45 MMS-144
P017 A +/-45 MMS-144
P018 A 0/90 MMS-144
P019 A +/-45 MMS-144
P020 A +/-45 MMS-144
P021 A 0/90 MMS-144
P022 A +/-45 MMS-144
P023 A +/-45 MMS-144
P024 A 0/90 MMS-144
P025 A +/-45 MMS-144
P026 A 0/90 MMS-144
P027 A 0/90 MMS-144
P028 A +/-45 MMS-144
P029 A +/-45 MMS-144
P030 A 0/90 MMS-144
P031 A +/-45 MMS-144
P032 A 0/90 MMS-144
P033 A 0/90 MMS-144
P034 A +/-45 MMS-144
P035 A 0/90 MMS-144
P036 A +/-45 MMS-144
P037 A +/-45 MMS-144
P038 A 0/90 MMS-144
P039 A +/-45 MMS-144
P040 A +/-45 MMS-144
P041 A 0/90 MMS-144
P042 A +/-45 MMS-144
P043 A +/-45 MMS-144
P044 A 0/90 MMS-144
P045 A +/-45 MMS-144
P046 A 0/90 MMS-144
P047 A 0/90 MMS-144
P048 A +/-45 MMS-144
P049 A 0/90 MMS-144
P050 A +/-45 MMS-144
P051 A +/-45 MMS-144
P052 A 0/90 MMS-144
P053 A 0/90 MMS-144
P054 A +/-45 MMS-144
P055 A 0/90 MMS-144
P056 A +/-45 MMS-144
P057 A +/-45 MMS-144
P058 A 0/90 MMS-144
P059 A +/-45 MMS-144
P060 A +/-45 MMS-144
P061 A 0/90 MMS-144
P062 A +/-45 MMS-144
P063 A +/-45 MMS-144
P064 A 0/90 MMS-144
P065 A +/-45 MMS-144
P066 A +/-45 MMS-144
P067 A 0/90 MMS-144
P068 A +/-45 MMS-144
P069 A +/-45 MMS-144
P070 A 0/90 MMS-144
P071 A 0/90 MMS-144
P072 A +/-45 MMS-144
P073 A 0/90 MMS-144
P074 A +/-45 MMS-144
P075 A 0/90 MMS-144
P076 A 0/90 MMS-144
P077 A +/-45 MMS-144
P078 B +/-45 MMS-144
P079 B 0/90 MMS-144
P080 B +/-45 MMS-144
P081 B 0/90 MMS-144
P082 B 0/90 MMS-144
P083 B +/-45 MMS-144
P084 A +/-45 MMS-144
P085 A 0/90 MMS-144
P086 A 0/90 MMS-144
P087 A +/-45 MMS-144
P088 A 0/90 MMS-144
P089 A +/-45 MMS-144
P090 A +/-45 MMS-144
P091 A 0/90 MMS-144
P092 A 0/90 MMS-144
P093 A +/-45 MMS-144
P094 A 0/90 MMS-144
P095 A +/-45 MMS-144
P096 A +/-45 MMS-144
P097 A 0/90 MMS-144
P098 A 0/90 MMS-144
P099 A +/-45 MMS-144
P100 A 0/90 MMS-144
P101 A +/-45 MMS-144
P102 A +/-45 MMS-144
P103 A 0/90 MMS-144
P104 A 0/90 MMS-144
P105 A +/-45 MMS-144
P106 A 0/90 MMS-144
P107 A +/-45 MMS-144
P108 A +/-45 MMS-144
P109 A 0/90 MMS-144
P110 A +/-45 MMS-144
P111 A 0/90 MMS-144
P112 A 0/90 MMS-144
P113 A +/-45 MMS-144
P114 A +/-45 MMS-144
P115 A 0/90 MMS-144
P116 A 0/90 MMS-144
P117 A +/-45 MMS-144
P118 A 0/90 MMS-144
P119 A +/-45 MMS-144
P120 A +/-45 MMS-144
P121 A 0/90 MMS-144
P122 A 0/90 MMS-144
P123 A +/-45 MMS-144
P124 A 0/90 MMS-144
P125 A +/-45 MMS-144
P126 A +/-45 MMS-144
P127 A 0/90 MMS-144
P128 A 0/90 MMS-144
P129 A +/-45 MMS-144
P130 A 0/90 MMS-144
P131 A +/-45 MMS-144
P132 A +/-45 MMS-144
P133 A 0/90 MMS-144
P134 A 0/90 MMS-144
P135 A +/-45 MMS-144
P136 A 0/90 MMS-144
P137 A +/-45 MMS-144
P138 B 0/90 MMS-144
P139 B 0/90 MMS-144
P140 B +/-45 MMS-144
P141 B 0/90 MMS-144
P142 B 0/90 MMS-144
P143 B +/-45 MMS-144
P144 B 0/90 MMS-144
P145 B +/-45 MMS-144
P146 B +/-45 MMS-144
P147 B 0/90 MMS-144
P148 B +/-45 MMS-144
P149 B 0/90 MMS-144
P150 B 0/90 MMS-144
P151 B +/-45 MMS-144
P152 B 0/90 MMS-144
P153 B 0/90 MMS-144
-103
BB
C C
Section cut B-B
PLY/PART
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P029
P030
P031
P032
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049
P050
P051
P052
P053
P054
P055
P056
P057
P058
P059
P060
P061
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P095
P094
P093
P092
P091
P090
PLY/PART
P102
P103
P104
P105
P106
P107
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
PLY/PART
P096
P097
P098
P099
P100
P101
P107
P106
P105
P104
P103
P102
PLY/PART
P090
P091
P092
P093
P094
P095
P101
P100
P99
P98
P97
P96
PLY/PART
P090
P091
P092
P093
P094
P095
P007
P006
P005
P004
P003
P002
PLY/PART
P090
P091
P092
P093
P094
P095
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P096
P097
P098
P099
P100
P101
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P102
P103
P104
P105
P106
P107
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
(.100) 12 Plies
(.100) 12 Plies
12 Plies (.100)
(.233) 28 Plies
16 Plies (.133) (.133)
16 Plies (.133) 16 Plies
(.631) 76 Plies
TYPICAL
B
Section cut C-C
PLY/PART
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P029
P030
P031
P032
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049
P050
P051
P052
P053
P054
P055
P056
P057
P058
P059
P060
P061
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P072
P073
P074
P075
P076
P077
PLY/PART
P077
P076
P075
P074
P073
P072
P007
P006
P005
P004
P003
P002
PLY/PART
P002
P003
P004
P005
P006
P007
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P077
P076
P075
P074
P073
P072
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P084
P085
P086
P087
P088
P089
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P077
P076
P075
P074
P073
P072
P089
P088
P087
P086
P085
P084
PLY/PART
P084
P085
P086
P087
P088
P089
P078
P079
P080
P081
P082
P083
PLY/PART
P084
P085
P086
P087
P088
P089
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
(.133) 16 Plies
(.133) 16 Plies
(.133) 16 Plies
(.233) 28 Plies
(.100) 12 Plies(.100)
12 Plies
(.100) 12 Plies
(.631) 76 Plies
TYPICAL
A
G
.50 5 EQ SPACES
.37 4 EQ SPACES
Detail A Scale: 1:1
EOP P138
EOP P142
EOP P140
EOP P143
EOP P141
EOP P139
EOP P144,P149
EOP P147,P152
EOP P146,P151
EOP P148,P153
EOP P145,P150
2.50
15 EQ SPACES
.50
5 EQ SPACES
.50( )
7.01( )
Detail B Scale: 1:1
EOP P009,P025,P041,P057
EOP P012,P028,P044,P061
EOP P014,P030,P046,P062
EOP P016,P032,P048,P064
EOP P018,P034,P050,P066
EOP P020,P036,P052,P068
EOP P022,P038,P054,P070
EOP P010,P026,P042,P058
EOP P023,P039,P055,P071
EOP P021,P037,P053,P069
EOP P019,P035,P051,P067
EOP P017,P033,P049,P065
EOP P015,P031,P047,P063
EOP P013,P029,P045,P061
EOP P011,P027,P043,P059
EOP P008,P024,P040,P056
EOP P008
EOP P012
EOP P010
EOP P013
EOP P011
EOP P009
.50( )
.50
5 Q SPACES
7.01( )
2.50
15 EQ SPACES
Detail G Scale 1:1
EOP P009
EOP P013
EOP P011
EOP P010
EOP P012
EOP P008
EOP P008,P024,P040,P056
EOP P011,P027,P043,P059
EOP P013,P029,P045,P061
EOP P015,P031,P047,P063
EOP P017,P033,P049,P065
EOP P019,P035,P051,P067
EOP P021,P037,P053,P069
EOP P023,P039,P055,P071
EOP P010,P026,P042,P058
EOP P022,P038,P054,P070
EOP P020,P036,P052,P068
EOP P018,P034,P050,P066
EOP P016,P032,P048,P064
EOP P014,P030,P046,P062
EOP P012,P028,P044,P061
EOP P009,P025,P041,P057
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
B
C
D
SHEET 7 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
-103
D
D
E
E F
F G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P P
.233( )
.100R(2X TRUE )
Section cut D-D
.100R(2X TRUE )
.233( )
.100( )
Section cut E-E
.233( )
.100( )
.100R(2X TRUE )
Section cut F-F
.100R(2X TRUE )
.233( )
.100( )
.631( )
Section cut G-G
.100( )
.233( )
.100R(2X TRUE )
Section cut H-H
.100R(2X TRUE )
.233( )
.100( )
Section cut I-I
.100R(2X TRUE )
.233( )
Section cut J-J
.100( )
.233( )
.100R(2X TRUE )
Section cut K-K .100R(2X TRUE )
.233( )
.100( )
Section cut L-L
.631( )
.100( )
.233( )
.100R(2X TRUE )
Section cut M-M
.100R(2X TRUE )
.233( )
.100( )
Section cut N-N
.233( )
.100( )
.100R(2X TRUE )
Section cut O-O
.100R12X
.100R(2X TRUE )
.233( )
.250R(4X )
7.061( )
Section cut P-P
(.05 X .50 TYP)
(FINAL EDGE TRIM)
TYPICAL
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
B
C
D
SHEET 8 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
-103
Q
Q
R
R
Section cut Q-Q
PLY/PART
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P029
P030
P031
P032
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049
P050
P051
P052
P053
P054
P055
P056
P057
P058
P059
P060
P061
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P078
P079
P080
P081
P082
P083
PLY/PART
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P029
P030
P031
P032
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049
P050
P051
P052
P053
P054
P055
P056
P057
P058
P059
P060
P061
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P078
P079
P080
P081
P082
P083
76 Plies (.631)
76 Plies (.631)
PLY/PART
P002
P003
P004
P005
P006
P007
P078
P079
P080
P081
P082
P083
12 Plies (.100)
PLY/PART
P002
P003
P004
P005
P006
P007
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
28 Plies (.233)
PLY/PART
P002
P003
P004
P005
P006
P007
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
(.133) 16 Plies
PLY/PART
P002
P003
P004
P005
P006
P007
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
28 Plies (.233)
12 plies (.100)
PLY/PART
P002
P003
P004
P005
P006
P007
P078
P079
P080
P081
P082
P083
C
D
E
F
Section cut R-R
12 Plies (.100)
PLY/PART
P083
P082
P081
P080
P079
P078
P095
P094
P093
P092
P091
P090
28 Plies (.233)
PLY/PART
P083
P082
P081
P080
P079
P078
P153
P152
P151
P150
P149
P148
P147
P146
P145
P144
P143
P142
P141
P140
P139
P138
P095
P094
P093
P092
P091
P090
16 Plies (.133)
PLY/PART
P090
P091
P092
P093
P094
P095
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
12 Plies (.100)
PLY/PART
P090
P091
P092
P093
P094
P095
P125
P124
P123
P122
P121
P120 16 Plies (.133)
PLY/PART
P120
P121
P122
P123
P124
P125
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P120
P121
P122
P123
P124
P125
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
28 Plies
12 Plies (.100)
PLY/PART
P120
P121
P122
P123
P124
P125
P078
P079
P080
P081
P082
P083
(.233)
2.50
15 EQ SPACES
Detail C Scale: 1:1
EOP P008,P024,P040,P056
EOP P011,P027,P043,P059
EOP P013,P029,P045,P061
EOP P015,P031,P047,P063
EOP P017,P033,P049,P065
EOP P019,P035,P051,P067
EOP P021,P037,P053,P069
EOP P023,P039,P055,P071
EOP P010,P026,P042,P058
EOP P022,P038,P054,P070
EOP P020,P036,P052,P068
EOP P018,P034,P050,P066
EOP P016,P032,P048,P064
EOP P014,P030,P046,P062
EOP P012,P028,P044,P060
EOP P009,P025,P041,P057
2.50
15 EQ SPACES
Detail D Scale 1:1
EOP P008,P024,P040,P056
EOP P011,P027,P043,P059
EOP P013,P029,P045,P061
EOP P015,P031,P047,P063
EOP P017,P033,P049,P065
EOP P019,P035,P051,P067
EOP P021,P037,P053,P069
EOP P023,P039,P055,P071
EOP P010,P026,P042,P058
EOP P022,P038,P054,P070
EOP P020,P036,P052,P068
EOP P018,P034,P050,P066
EOP P016,P032,P048,P064
EOP P014,P030,P046,P062
EOP P012,P028,P044,P060
EOP P009,P025,P041,P057
1.05
3 EQ SPACES
Detail E Scale 1:1
EOP P138,P142,P146,P150
EOP P140,P144,P148,P152
EOP P141,P145,P149,P153
EOP P139,P143,P147,P151
1.05
6 EQ SPACES
Detail F Scale 1:1
EOP P138,P142,P146,P150
EOP P140,P144,P148,P152
EOP P141,P145,P149,P153
EOP P139,P143,P147,P151
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
B
C
D
SHEET 9 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
-103
S
S
T
T
U
U
V
V
Section cut S-S
(.233) 28 Plies
PLY/PART
P083
P082
P081
P080
P079
P078
P153
P152
P151
P150
P149
P148
P147
P146
P145
P144
P143
P142
P141
P140
P139
P138
P107
P106
P105
P104
P103
P102
16 Plies (.133)
PLY/PART
P102
P103
P104
P105
P106
P107
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P102
P103
P104
P105
P106
P107
P137
P136
P135
P134
P133
P132
12 Plies (.100)
16 Plies (.133)
PLY/PART
P132
P133
P134
P135
P136
P137
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
28 Plies (.233)
PLY/PART
P132
P133
P134
P135
P136
P137
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
Section cut T-T
PLY/PART
P083
P082
P081
P080
P079
P078
P153
P152
P151
P150
P149
P148
P147
P146
P145
P144
P143
P142
P141
P140
P139
P138
P101
P100
P099
P098
P097
P096
PLY/PART
P083
P082
P081
P080
P079
P078
P101
P100
P099
P098
P097
P096
(.233) 28 Plies
12 Plies (.100)
16 Plies (.133)
PLY/PART
P096
P097
P098
P099
P100
P101
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P126
P127
P128
P129
P130
P131
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
16 Plies
PLY/PART
P096
P097
P098
P099
P100
P101
P131
P130
P129
P128
P127
P126
12 Plies (.100)
PLY/PART
P126
P127
P128
P129
P130
P131
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
PLY/PART
P126
P127
P128
P129
P130
P131
P078
P079
P080
P081
P082
P083
12 Plies (.100)
28 Plies (.233)
(.133)
Section cut U-U
28 Plies (.233)
PLY/PART
P077
P076
P075
P074
P073
P072
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
16 Plies (.133)
PLY/PART
P077
P076
P075
P074
P073
P072
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P113
P112
P111
P110
P109
P108
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
16 Plies (.133)
PLY/PART
P113
P112
P111
P110
P109
P108
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
28 Plies (.233)
12 Plies (.100)
PLY/PART
P113
P112
P111
P110
P109
P108
P078
P079
P080
P081
P082
P083
12 Plies (.100)
PLY/PART
P077
P076
P075
P074
P073
P072
P108
P109
P110
P111
P112
P113
12 Plies (.100)
PLY/PART
P083
P082
P081
P080
P079
P078
P072
P073
P074
P075
P076
P077
Section cut V-V
PLY/PART
P083
P082
P081
P080
P079
P078
P089
P088
P087
P086
P085
P084
12 Plies
PLY/PART
P083
P082
P081
P080
P079
P078
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P089
P088
P087
P086
P085
P084
28 Plies (.233)
16 Plies (.133)
PLY/PART
P084
P085
P086
P087
P088
P089
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P084
P085
P086
P087
P088
P089
P119
P118
P117
P116
P115
P114
16 Plies (.133)
12 Plies (.100)
PLY/PART
P114
P115
P116
P117
P118
P119
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P114
P115
P116
P117
P118
P119
P078
P079
P080
P081
P082
P083
12 Plies (.100)
28 Plies
PLY/PART
P114
P115
P116
P117
P118
P119
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
(.100)
(.233)
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
B
C
D
SHEET 10 OF 10SCALE
SIZE CAGE CODE DWG NO REV
O7CD8E
H
G
F
E
6 5
4 3 2 1
A
B
C
D
2 1
H
G
F
E
AR1001C C
1:2
TYPICAL "BOX" FIRST AND
FIFTH PLY SPLICING
TYPICAL "BOX" SECOND AND
SIXTH PLY SPLICING 1919
TYPICAL "BOX" THIRD
PLY SPLICING
TYPICAL "BOX" FOURTH
PLY SPLICING
TYPICAL PLY SPLICING
P002,P006,P010...P070
TYPICAL PLY SPLICING
P003,P007,P011...P071
TYPICAL PLY SPLICING
P004,P008,P012...P068
TYPICAL PLY SPLICING
P005,P009,P013...P069
19 19 19
-103
W W
XX
Section cut W-W
PLY/PART
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P029
P030
P031
P032
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049
P050
P051
P052
P053
P054
P055
P056
P057
P058
P059
P060
P061
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P125
P124
P123
P122
P121
P120
(.631) 76 Plies
12 Plies (.100)
PLY/PART
P120
P121
P122
P123
P124
P125
P007
P006
P005
P004
P003
P002
16 Plies (.133)
PLY/PART
P002
P003
P004
P005
P006
P007
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P120
P121
P122
P123
P124
P125
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
16 Plies (.133)
PLY/PART
P126
P127
P128
P129
P130
P131
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
16 Plies (.133)
16 Plies (.133)
PLY/PART
P132
P133
P134
P135
P136
P137
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
PLY/PART
P132
P133
P134
P135
P136
P137
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
28 Plies (.233)
PLY/PART
P126
P127
P128
P129
P130
P131
P137
P136
P135
P134
P133
P132
(.100) 12 Plies
12 Plies (.100)
PLY/PART
P120
P121
P122
P123
P124
P125
P131
P130
P129
P128
P127
P126
TYPICAL
Section cut X-X
PLY/PART
P001
P002
P003
P004
P005
P006
P007
P008
P009
P010
P011
P012
P013
P014
P015
P016
P017
P018
P019
P020
P021
P022
P023
P024
P025
P026
P027
P028
P029
P030
P031
P032
P033
P034
P035
P036
P037
P038
P039
P040
P041
P042
P043
P044
P045
P046
P047
P048
P049
P050
P051
P052
P053
P054
P055
P056
P057
P058
P059
P060
P061
P062
P063
P064
P065
P066
P067
P068
P069
P070
P071
P108
P109
P110
P111
P112
P113
76 Plies (.631)
PLY/PART
P113
P112
P111
P110
P109
P108
P119
P118
P117
P116
P115
P114
(.100) 12 Plies
(.233) 28 Plies
PLY/PART
P114
P115
P116
P117
P118
P119
P138
P139
P140
P141
P142
P143
P144
P145
P146
P147
P148
P149
P150
P151
P152
P153
P078
P079
P080
P081
P082
P083
PLY/PART
P114
P115
P116
P117
P118
P119
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
16 Plies (.133)(.133)
16 Plies
PLY/PART
P113
P112
P111
P110
P109
P108
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
12 Plies (.100)
PLY/PART
P113
P112
P111
P110
P109
P108
P007
P006
P005
P004
P003
P002
16 Plies (.133)
PLY/PART
P002
P003
P004
P005
P006
P007
P144
P145
P146
P147
P078
P079
P080
P081
P082
P083
TYPICAL
-103
TYPICAL
-103
TYPICAL
Drawing Approved Electronically
DRAWING OF RECORD
02/26/2016
A pp ro ve d fo r P ub lic
R el ea rib ut io n un lim
| AR1001C_C_Sheet_1 |
| AR1001C_C_Sheet_2 |
| AR1001C_C_Sheet_3 |
| AR1001C_C_Sheet_4 |
| AR1001C_C_Sheet_5 |
| AR1001C_C_Sheet_6 |
| AR1001C_C_Sheet_7 |
| AR1001C_C_Sheet_8 |
| AR1001C_C_Sheet_9 |
| AR1001C_C_Sheet_10 |
File details come from the government source that posted it. Updated .