The file's text, extracted by GovTribe without its formatting.
FOR OFFICIAL USE ONLY
JOINT PRIMARY AIRCRAFT TRAINING SYSTEMS (JPATS)
NATIONAL AIRSPACE COMPLIANCE (NAC)
AUTOMATIC DEPENDENT SURVEILLANCE–BROADCAST (ADS-B) OUT
PROGRAM WORK BREAKDOWN
STRUCTURE (WBS) DICTIONARY
FOR THE T-6A AIRCRAFT &
AIRCREW TRAINING DEVICES (ATD)
Prepared by:
T-6A Integrated Product Team JPATS Program Office Wright-Patterson AFB, OH
October 2015
Document Information
Edition Information:
Type of Document:
Process
| Status of Document: |
| DRAFT |
| Document File Name: |
| JPATS NAC ADS-B Out Program WBS Dictionary.docx |
Document File Location:
Document Version:
TBD
Version 1
Document Control:
Title of Document:
JPATS NAC ADS-B (Out) Program WBS Dictionary
| Program Name: |
| JPATS NAC ADS-B (Out) |
Contact Information:
Primary Contact:
Mark Ragland Program Manager, Avionics IPT Lead JPATS (T-6) Branch, Training Aircraft Division 1970 Monahan Way, Bldg 11A, Room 202.6
WPAFB, OH 45433-7211
| E mail Address: |
| mark.ragland@us.af.mil |
Record of Review and Change
| Date |
| Version |
| Description of Change |
| 28 October 2015 |
| 1.0 |
| Document Created |
| 7 December 2015 |
| 1.0 |
| Removed WBS (put in separate document) |
Table of Contents
| 1 | INTRODUCTION | 3 |
| 1.1 | JPATS NAC ADS-B (Out) Program Overview | 3 |
| 2 | JPATS NAC ADS-B (Out) Program Dictionary | 4 |
INTRODUCTION
This Program Work breakdown (WBS) Dictionary identifies and defines the element structure required to design, develop, integrate, test, certify, and install the Automatic Dependent Surveillance–Broadcast (ADSB) (Out) capability into the T-6A aircraft and the T-6A Aircrew Training Devices (ATD). It has been developed using MIL-STD-881C, Appendices A and L.
JPATS NAC ADS-B (Out) Program Overview
ADS-B (Out) is a requirement mandated by the Federal Aviation Administration (FAA) for aircraft operating within the National Airspace System as specified by Title 14 Code of Federal Regulations Part 91.225. This mandate directs a nationwide transition to ADS-B (Out) technology by 2020. ADS-B (Out) is a system by which aircraft repeatedly broadcast current position, altitude, airspeed, identification, and other information over a common data link.
JPATS NAC ADS-B (Out) Program Dictionary Table 2 contains JPATS NAC ADS-B (Out) program definitions for those elements that may apply to the EMD and/or Production effort.
Table 2. Program WBS Dictionary
| WBS Element Number |
| WBS Description |
| WBS Definition |
| 1.0 |
| JPATS NAC ADS-B (Out) |
| The complex of equipment (hardware/software), data, services, and facilities required to develop, produce, and support the T-6A aircraft and Aircrew Training Devices (ATD). |
| 1.1 |
| Air Vehicle |
| The design, development, and production of complete ADS-B (Out) for the T-6A aircraft and ATD. |
| 1.1.3 |
| Vehicle Subsystems |
| N/A |
| 1.1.4 |
| Avionics |
| ADS-B (Out) equipment on the T-6A and ATD, which is primarily electronic in nature. |
| 1.1.4.1 |
| Avionics Integration, Assembly, Test & Checkout |
| This element includes all effort of technical & functional activities associated with the design, development, and production of the hardware configuration required for assembling & testing the ADS-B (Out) system on the T-6A aircraft and ATD. |
| 1.1.4.2 |
| Communication/Identification |
| N/A |
| 1.1.4.3 |
| Navigation/Guidance |
| This element contains the equipment (hardware) installed on the T-6A and ATD to perform the ADS-B (Out) function. |
| 1.1.4.4 |
| Mission Computer/Processing |
| N/A |
| 1.1.4.6 |
| Data Display and Controls |
| N/A |
| 1.1.4.7 |
| Survivability |
| N/A |
| 1.1.4.8 |
| Reconnaissance |
| N/A |
| 1.1.4.9 |
| Automatic Flight Control |
| N/A |
| 1.1.4.10 |
| Health Monitoring System |
| N/A |
| 1.1.4.11 |
| Stores Management |
| N/A |
| 1.1.4.12 |
| Avionics Software Release 1..n |
| N/A |
| 1.1.4.13 |
| Other Avionics Subsystems 1..n |
| N/A |
| 1.1.5 |
| Armament/Weapons Delivery |
| N/A |
| 1.1.6 |
| Auxiliary Equipment |
| N/A |
| 1.1.7 |
| Furnishings and Equipment |
| N/A |
| 1.1.8 |
| Air Vehicle Software Release 1..n |
| N/A |
| 1.1.9 |
| Air Vehicle Integration, Assembly, Test & Checkout |
| N/A |
| 1.2 |
| Systems Engineering |
| The technical and management efforts of directing and controlling a totally integrated engineering effort for the T-6A and ATD. |
| 1.3 |
| Program Management |
| The business and administrative planning, organizing, directing, coordinating, controlling, and approval actions designated to accomplish overall program objectives, which are not associated with specific hardware elements and are not included in systems engineering. |
| 1.4 |
| System Test and Evaluation |
| The use of pilot, prototype, production, or specifically fabricated hardware/ software to obtain or validate engineering data on the performance of the system during the developmental phase of the program. It also includes all effort associated with the development of any specialized tools or data in support of the system level test program. |
| 1.4.1 |
| Development Test and Evaluation |
| This effort is planned, conducted and monitored by the developing agency of the DoD component. It includes test and evaluation conducted to: |
a. Demonstrate that the engineering design and development process is complete
b. Demonstrate that the design risks have been minimized
c. Demonstrate that the system will meet specifications
d. Estimate the system's military utility when introduced
e. Determine whether the engineering design is supportable (practical, maintainable, safe, etc.) For operational use
f. Provide test data with which to examine and evaluate trade-offs against specification requirements, life cycle cost, and schedule
g. Perform the logistics testing efforts to evaluate the achievement of supportability goals, the adequacy of the support package for the system, (e.g., deliverable maintenance tools, test equipment, technical publications, maintenance instructions, and personnel skills and training requirements, etc.)
| 1.4.2 |
| Operational Test and Evaluation |
| The test and evaluation conducted by agencies other than the developing command to assess the prospective system's military utility, operational effectiveness, operational suitability, logistics supportability (including compatibility, inter-operability, reliability, maintainability, logistic requirements, etc.), cost of ownership, and need for any modifications. |
| 1.4.3 |
| Mock-Ups / System Integration Labs (SILs) |
| The design engineering and production of system or subsystem mock-ups that have special contractual or engineering significance or that are not required solely for the conduct of one of the above elements of testing. SILs are often used in lieu of (or in addition to) mock-ups. SILs are risk reduction facilities where software and hardware can be developed, integrated, tested and evaluated for both standalone functionality and/or interoperability prior to being fielded. |
| 1.4.4 |
| Test and Evaluation Support |
| The support elements necessary to operate and maintain, during test and evaluation, systems and subsystems, which are not consumed during the testing phase and are not allocated to a specific phase of testing. |
| 1.4.5 |
| Test Facilities |
| The special test facilities required for performance of the various developmental tests necessary to prove the design and reliability of the system or subsystem. |
| 1.5 |
| Training |
| Deliverable training services, devices, accessories, aids, equipment, and parts used to facilitate instruction through which personnel will learn to operate and maintain the ADS-B (Out) system with maximum efficiency. |
| 1.5.1 |
| Equipment |
| Distinctive deliverable end items of training equipment, assigned by either a contractor or military service, required to meet specific training objectives. |
| 1.5.2 |
| Services |
| Deliverable training services, accessories, and aids necessary to accomplish the objectives of training. |
| 1.6 |
| Data |
| The deliverable data required to be listed on a contract data requirements list, DD Form 1423. |
| 1.6.1 |
| Technical Publications |
| Technical data, providing instructions for installation, operation, maintenance, training, and support, formatted into a technical manual. Data may be presented in any form regardless of the form or method of recording. Technical orders that meet the criteria of this definition may also be classified as technical manuals. |
| 1.6.2 |
| Engineering Data |
| Recorded scientific or technical information (regardless of the form or method of recording) including computer software documentation. Engineering data defines and documents an engineering design or product configuration (sufficient to allow duplication of the original items) and is used to support production, engineering and logistics activities. |
| 1.6.3 |
| Management Data |
| The data items necessary for configuration management, cost, schedule, contractual data management, program management, etc., required by the Government. |
| 1.6.4 |
| Support Data |
| The data items designed to document support planning in accordance with functional categories. |
| 1.6.5 |
| Data Depository |
| N/A |
| 1.7 |
| Peculiar Support Equipment |
| The design, development, and production of those deliverable items and associated software required to support and maintain the ADS-B (Out) system or portions of the system while the system is not directly engaged in the performance of its mission, and which are not common support equipment. |
| 1.7.1 |
| Test and Measurement Equipment |
| The peculiar or unique testing and measurement equipment that allows an operator or maintenance function to evaluate operational conditions of a system or equipment by performing specific diagnostics, screening or quality assurance effort at an organizational, intermediate, or depot level of equipment support. |
| 1.7.2 |
| Support and Handling Equipment |
| The deliverable tools and handling equipment used for support of the mission system. |
| 1.8 |
| Common Support Equipment |
| The items required to support and maintain the ADS-B (Out) system or portions of the system while not directly engaged in the performance of its mission, and which are presently in the DoD inventory for support of other systems. |
| 1.8.1 |
| Test and Measurement Equipment |
| The common testing and measurement equipment that allows an operator or maintenance function to evaluate operational conditions of a system or equipment by performing specific diagnostics, screening or quality assurance effort at an organizational, intermediate, or depot level of equipment support. |
| 1.8.2 |
| Support and Handling Equipment |
| The deliverable tools and handling equipment used for support of the mission system. |
| 1.9 |
| Operational/Site Activation |
| The real estate, construction, conversion, utilities, and equipment to provide all facilities required to house, service, and launch prime mission equipment at the organizational and intermediate level. |
| 1.9.1 |
| System Assembly, Installation & Checkout on Site |
| The materials and services involved in the assembly of the ADS-B (Out) equipment at the site. |
| 1.9.2 |
| Contractor Technical Support |
| The materials and services provided by the contractor related to activation. |
| 1.9.3 |
| Site Construction |
| N/A |
| 1.9.4 |
| Site/Ship/Vehicle Conversion |
| N/A |
| 1.9.5 |
| Sustainment/Interim Contractor Support |
| N/A |
| 1.10 |
| Industrial Facilities |
| N/A |
| 1.10.1 |
| Construction/Conversion/Expansion |
| N/A |
| 1.10.2 |
| Equipment Acquisition or Modernization |
| N/A |
| 1.10.3 |
| Maintenance (Industrial Facilities) |
| N/A |
| 1.11 |
| Initial Spares and Repair Parts |
| The deliverable spare components, assemblies and subassemblies used for initial replacement purposes in the ADS-B (Out) system equipment end item. |