Questions and Answers.pdf

Questions and Answers

FA8224-12-R-0020

1- Can this solicitation be extended 1 week due to the Holliday Schedules?

A: We are extending the solicitation per Amendment 0001

2- On sh 5 0f 10 zn 11E should the callout be for a nut instead of a bolt?

A: Yes that is a correct, it should read "(24X) 1/2-13 Nut spot welded to frame centered on through hole 4 per shelf". (sorry for the typo)

3- Could we put 3/8-16 threads in caster plates and attach caster with a bolt and washer[no nuts]?

A: Yes that would be acceptable

4- On sh 1 of 10, note 4 Finish; should primer be used before the semi gloss enamel is applied?

A: Yes please apply 1 coat of primer per the manufactures recommendations.

5- On sh 7 of 10 I assume the threaded rod [item 3] is to be stainless steel since McM Carr hardware callouts are for stainless items.

A: Yes that is correct, the threaded rod material needs to be stainless steel to prevent corrosion.

6- Is item #3 of part number 309AMXG/EN carbon steel or stainless steel (alloy?).

A: The frame is to be made up of carbon steel (.2% or greater carbon steel). All hardware is to be stainless steel (such as the threaded rod addressed above.