PD Pylon Storage Cart Oct 2011.pdf

Page 1 of 2 Purchase Description for Pylon Storage Cart August 2011

Purchase Description for

Pylon Storage Cart

1.0 General

1.1 Suppliers shall fabricate and deliver 35 Pylon Storage Carts that meet the following specifications and the drawing set attached.

1.2 All materials, pieces/parts making up the Pylon storage cart shall be in new condition.

1.3 Specification compliance. In your bid response, please provide documentation that clearly shows that you meet each specification. If your bid is not compliant to each specification, please list the specification number and the deviation.

2.0 Pylon Storage Cart (Ref. Attached Drawing “A-10 Pylon Storage Cart Drawing

V2.1”)

2.1 Construction material,

a. Steel 2” square tubing, steel angle 1.5” x 1.5” x .125 thick wall, .25” thick plate for mounting casters, and .060” thick deck plating.

b. Plywood shelving: ½” thick AC Exterior

c. Plastic shelving sheeting: ¼” thick, durable, weather resistant, abrasion resistant, and chemical resistant plastic required.

d. Plastic shield on locking bar: ¾” diameter half circle, Material: High Density PE /

NYLON / DELRIN / or UHMW.

e. Aluminum: 6061-T6 1” plate machined as shown on drawing. No paint or anodize surface finish required.

2.2 All steel to be painted / or powder coated using enamel semi gloss gray paint chip #26173 FED-STD-595 MIL PRF-85285 (Type I Top Coat).

2.3 Full weld bead on all joints, ground flush on flat surfaces.

a. Welding: The contractor shall be responsible for the quality of all welding accomplished in the fulfillment of the requirements of this contract. Porous, popcorn or other poor quality welds will not be accepted. All welding procedures shall be accomplished in conformance with the latest edition of American Welding Society Standard D1.1 and performed by welders holding current certificates for the welding operations they are performing. Contractor is to provide proof of welder’s certification upon request.

2.4 Caster requirements:

a. Casters to be mounted to cart using bolts to attach the casters to the caster mounting plates (hole pattern) on frame.

b. Two front Caster to be brand name or equivalent to Colson 6” 1100lb swivel caster with TECH LOCK brake, PN# 4.06109.839BRK2.

c. Two rear caster to be brand name or equivalent to Colson 6” 1100lb swivel caster with FOOT SWIVEL LOCK PN# 4.06109.839MTG81.

2.5 Overall a high quality of craftsmanship and general workmanship is required.

a. For safe handling of the cart is close proximity to Aircraft, and to prevent safety related incidents (such as scrapes / cuts/ and abrasions). All Sharp corners and edges are to be removed. A MIN allowable corner/edge radius is .020”.

3.0 Delivery, Support and Warranty

3.1 The bid response shall quote F.O.B. Hill Air Force Base, Utah.

3.2 Contract performance period 60 days.

3.3 Deliveries shall be Monday thru Thursday 8:00AM to 2:00PM

3.4 Government (specifically 309

th AMXG/EN) shall inspect all carts for full acceptance.

3.5 All items supplied by vendor shall carry at minimum a 1 year warranty under normal use.

Pylon storage carts will be free from defects in materials and workmanship and that

Page 2 of 2 Purchase Description for Pylon Storage Cart August 2011 each unit/system will perform its design function for a period of no less than one (1) year. Warranty period to start from date of final acceptance of each unit. Any defects in materials or workmanship or failure of any product or component to perform its designed function during the warranty period shall be fixed by the contactor at no additional cost to the government. Warranty shall include the cost(s) of mobilization, parts, shipping and labor. Warranty repairs are to be fixed within 30 calendar days of notice of failure.