DRAFT - CDRL A005 - Safety and Health Plan-RPA.pdf

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER X

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

RPA

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

A005 Environmental Health and Safety Plan (HSP) SAFETY AND HEALTH PLAN (S&HP)

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

DI-ENVR-81375 PWS Para 4.3.3, 4.3.7 HQ ACC AMIC/PCE

7. DD 250 REQ 9.DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION

LT

SEE BLOCK 16 90 DAC b. COPIES

8. APP CODE

C

11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE Draft

Final

A

SEE BLOCK 16 SEE BLOCK 16

Reg

Repro

16. REMARKS:

(4) Electronic format shall be compatible with Microsoft Office and will be delivered via the ACC AMIC LAN electronic mail system.

(5) Base-specific plans shall at a minimum include: Confined Space

Management, Lock/Out-Tag/Out, Hazardous Communication (HAZCOM), Weapons Safety, Job Safety Training, Safety Inspections, Mishap Notification &

Reporting Procedures, Hazard Abatement Procedures, and Hazard Prevention &

Control Procedures, Safety Supplies and Equipment, Safety Reviews, Mishap

Prevention, and the Voluntary Protection Program, as applicable.

(8) The document will be accepted or rejected by the Government within 30 business days after receipt. Contractor shall revise and resubmit the document within 10 business days after receipt unless otherwise directed by the CO.

(9) Distribution authorized to U.S. Government agencies and their contractors

(administrative or operational data, 22 May 07). Other requests for this document shall be referred to HQ ACC AMIC/PKC.

(10), (11), (13) The contractor shall review and update their plans IAW with the approved QMS. When a plan is revised it shall be submitted to the CO for approval NLT 10 business days after revision. Revised plans shall include a revision page clearly delineating what has changed.

(15) Repro is electronic mail.

(16) Report should be sent via NIPRNET.

HQ ACC AMIC/PKC 1

HQ ACC AMIC/PCE 1

HQ ACC AMIC/PMA 1

15. TOTAL

G. PREPARED BY H. DATE I. APPROVED BY J. DATE