Attachment 2 - Miller Pipeworx Welder Specification.pdf
PDF 99 KB Posted
- Attached to
- Model Shop Welders Federal contract opportunity
- Solicitation number
- FA910123QB044
About this file
This document outlines specifications for a new pipe welding machine for the Arnold Air Force Base in Tennessee. The machine must have a 400 amp capacity at 44 volts DC with a 100% duty cycle. It must be capable of stick, TIG, MIG, pulsed MIG, and flux-cored welding processes. The machine will include a coolmate, runner cart, torch kit and accessories. It must have capabilities for MIG wire feed and TIG with fluid cooling, along with DC stick welding. A wireless foot control and all necessary cables and connectors for setup are required. The machine must be able to operate on the base's 480V, 3 phase, 60Hz power system and meet NFPA 79 standards. The quote should include work leads, gas hoses, foot pedal, TIG torch, MIG spool feeder, and flow meters for full functionality. Operating and maintenance manuals along with schematics must be provided. Installation, initial instruction, and a two-day training is to occur at Building 451. A 24-month warranty on materials and workmanship is required. The vendor must be able to provide service and parts beyond the warranty period and respond to repair calls within 36 hours.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA9101-23-Q-B044 Combined Synopsis Solicitation Amend 1.pdf | ||
| Attachment 1 - Miller Dynasty Welder Specification Amend1.pdf | ||
| Attachment 5 - Quote Worksheet Amend 1.docx | DOCX document | |
| Attachment 2 - Miller Pipeworx Welder Specification Amend1.pdf | ||
| Attachment 3 - ESAB Aristo MIG 5000i Specification Amend1.pdf | ||
| FA9101-23-Q-B044 Combined Synopsis Solicitation.pdf | ||
| Attachment 1 - Miller Dynasty Welder Specification.pdf | ||
| Attachment 3 - ESAB Aristo MIG 5000i Specification.pdf | ||
| Attachment 4 - Provisions and Clauses.pdf | ||
| Attachment 5 - Quote Worksheet.docx | DOCX document | |
| BNO_Justification_Miller_Redacted.pdf | ||
| BNO_Justification_ESAB_Redacted.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for Pipeworx Welding Machines at Arnold Air Force Base, TN;
Arnold Engineering Development Complex (AEDC)
Provide all materials, labor, and equipment necessary to provide a new fully functional welding Machine.
Refurbished or remanufactured parts are not authorized for this requirement.
• Machine capacities o Machine shall have a rated output of 400A at 44VDC, 100% duty cycle.
o Machine shall have an output range as follows: Stick_40-400A, DC TIG_10-350A, MIG/Flux-cored_10-44V, 400A.
o Machine shall have Net weights as follows: Power source_225lb, Single Feeder_65lb, Dual
Feeder_90lb, Cooler_133lb.
o Machine shall have the following processes: Stick (SMAW), DC TIG (GTAW), MIG (GMAW), RMD (GMAW-S), Pulsed MIG (GMAW-P), Flux-Cored (FCAW).
o Machine shall include coolmate, runner cart, Weldcraft W-375 torch kit and accessories.
o Machine shall have MIG wire fed capabilities.
o Machine shall have TIG capabilities with fluid cooling.
o Machine shall have DC Stick capabilities.
o Machine shall have wireless foot control.
o Machine shall have all cables, cords, and connectors for full and complete set up.
• General o Machine shall be built to NFPA 79 and operate with AEDC power system which is 480V, 3PH, 60 HZ.
o Quote shall include work leads, gas hoses, wireless foot pedal, TIG torch, MIG spool feeder, and flow meters as needed to allow machine to be completely operational as received.
o Operating Manual, Maintenance Manual, & Schematics provided.
o Quote shall include initial instruction at delivery on controls and operation of the machine.
o Quote shall include cart/trolley for machine delivered.
• Verification
After delivery the vendor shall test run the machine at the site in accordance with functional tests for accuracy required by ISO/ANSI Standards.
• Warranty o The machine shall be warranted against any defects in material, parts, and workmanship for 24 months after the date of installation. The control, servomotors and main spindle motor are warranted against defects in material, parts, and workmanship for 24 months after the date of installation.
• Maintenance, Parts and Service o The vendor shall have the capability to service the equipment (labor and parts) beyond the warranty period, or the equipment shall be able to be serviced by a local qualified representative.
The vendor or representative shall be capable of responding to a repair service call on-site within
36 hours and repair parts delivery within 48 hours after placement of order.
• Packaging/Delivery o Provide all preservation, packaging, and packing to ensure safe delivery of the machine and related components to AEDC (FOB Arnold Air Force Base, TN 37389). Deliver Machine to AEDC for off-loading by AEDC personnel.
• Installation/Training o Installation will be at the Arnold Air Force Base, TN; Arnold Engineering Development
Complex’s Model Shop, Maintenance Shop, Building 451. Installation of the machine shall be accomplished by Model Shop personnel and supervised by factory trained servicemen. Two day initial training on machine features and operation shall be done beginning at machine startup following machine installation.
File details come from the government source that posted it. Updated .