Att D - Cost Proposal.xlsx
XLSX spreadsheet 41 KB Posted
- Attached to
- Mobility VansBid Documents State and local contract opportunity
- Solicitation number
- 26-84944
- Issued by
- Marion County, Indiana
About this file
This is a Cost Proposal Template for Mobility Vans, solicitation number 26-84944, issued by a state transportation agency. The document provides detailed instructions for vendors to complete a comprehensive cost proposal for purchasing multiple types of mobility vehicles, including Low Floor Minivans, Small Transit Vehicles, Large Transit Vehicles, and Ford Transit Cutaway vehicles. Vendors are required to populate yellow-shaded cells in an Excel workbook, providing pricing for base vehicles and various optional equipment configurations. The proposal requires precise formatting, with specific instructions about entering dollar amounts and percentage values, and warns that incorrect formatting or incomplete responses may result in disqualification.
The cost proposal template includes extensive optional equipment specifications for each vehicle type, such as wheelchair lift modifications, seating configurations, accessibility features, communication systems, and paint schemes. Pricing must account for mandatory and optional equipment, with vendors required to provide additional cost or reduction amounts for each specified option. The document emphasizes that federal funding guidelines may supersede state terms and conditions, and vendors must be aware of minimum vehicle specifications and federally-driven contract terms. The proposal allows for yearly producer price index adjustments for years 2-4 of the contract, indicating a multi-year procurement strategy for mobility vehicle acquisition.
View the file
Other files for this state and local contract opportunity
Show all 20
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Instructions
| Mobility Vans, 26-84944 |
| Attachment D - Cost Proposal Template |
Instructions
Please complete the cost proposal by populating ONLY the yellow shaded cells on the following sheets. The white, blue, and gray cells are preformatted, and any unnecessary changes to the cost proposal or formulas may be grounds for disqualification. Proposing fees in any manner other than what is requested or attaching caveats to pricing may put your proposal at risk.
| Non-Excel Workbook Information: |
| Your response must also include non-Excel workbook information (e.g., accessory/option price lists) as part of your proposal, but only in addition to all required information outlined in the Excel workbook. Please attach all non-Excel workbook information electronically with the Excel workbook submission. |
| Do Not Change Format of Any Tab: |
| Respondents should not change either the formatting or structure of this Excel workbook, as this could result in an incorrect analysis of the proposal and disqualification of the respondent. |
| Note: Respondents must be aware that mobility vans have minimum specifications and additional federally driven contract terms and conditions outlined in Attachment M. Due to federal funding guidelines, Respondents should be aware that if any of the State's terms and conditions conflict with federal terms and conditions (as listed in Attachment M), the federal terms and conditions will prevail. |
| There will be no additional delivery fee; All prices must be included in the overall cost. |
Mobility Vans
| Mobility Vans, 26-84944 | Respondent Name |
| Attachment D - Cost Proposal Template | |
| 0 | |
| Instructions: | |
| Based on the models proposed in "Tab A. Vehicle Minimum Specifications", the Respondent shall provide pricing for the purchase of vehicles listed. |
1) Provide answers to all cells shaded in yellow for each vehicle type that you responded to in "Tab A. Vehicle Minimum Specifications".
2) Use the Cost Component Definitions tab to aid in your understanding of the items you are required to fill out.
3) Do not change the formatting of any cell; the cells have been pre-formatted for the proper evaluation of the Respondents' cost proposals. For cells formatted with dollars, enter only amounts up to the cent value (e.g., $0.01). For cells formatted with percentages, enter only amounts up to the one hundredth decimal place (e.g., 0.01%)
4) Enter “0” if there is no charge for an item. Do not leave any cells blank in any vehicle that you are intending to respond to. Doing so could result in an incorrect analysis of the proposal and disqualification of the Respondent.
NOTE: Respondents must be aware that Mobility Vans have minimum specifications and additional federally-driven contract terms and conditions outlined in Attachment I. Due to federal funding guidelines, Respondents should be aware that, should any of the State’s terms and conditions conflict with Federal terms and conditions (as listed in Attachment I), the Federal terms and conditions will prevail.
| Low Floor Minivan | Small Transit Vehicle | Large Transit Vehicle | Ford Transit Cutaway | |
| Manufacturer | ||||
| Model | ||||
| Model Year Order Cut Off Date | MM/DD/YYYY | MM/DD/YYYY | MM/DD/YYYY | MM/DD/YYYY |
Vehicle Costs Arthur L. Sample IV: Arthur L. Sample IV:
| The state expects that the winning respondent will provide yearly producer price index for year 2-4 pricing | Purchase Price per Vehicle | |
| $ - 0 |
| Low Floor Minivan Requirements | FALSE | ||
| Small Transit Vehicle Optional Equipment | FALSE | ||
| Large Transit Vehicle Optional Equipment | FALSE | ||
| Ford Transit Cutaway | FALSE | ||
| Mandatory Options | FALSE | ||
| Optional Equipment | |||
| Please provide the additional cost or reduction amount for the options listed for each vehicle. If an item is not available, please select "N/A." | |||
| Note: Some options are mandatory and must be available upon request (marked "Option Must be Available"), and a price must be entered in this worksheet. | |||
| Low Floor Minivan Requirements (Specifications) - Mandatory | Yes/No | Additional Cost or Reduction ($) | Comments |
| Forward Facing Rear fold away Center Seat: CE White ADA-35, Braun 125 Fold-A-Way or equivalent. This seat must meet all standard specifications listed in this bid. Seat shall have vinyl fold up armrest to match seat color on the right side. Fabric and color shall match OEM. (Option Must be Available) | |||
| Low Floor Minivan Requirements (Specifications) - Optional | Yes, No, or N/A | Additional Cost or Reduction ($) | Comments |
| Sur-Lok GO2 Oxygen tank holder | |||
| Rear Entry Ramp | |||
| 30"x62" folding ramp | |||
| 31"x57" Ramp | |||
| Q-Straint Model #Q-10010 QRT-360 Retractors with L-Track Fittings and Q8-6325-A Standard Lap & Shoulder Belt Assembly | |||
| Mandatory Options | FALSE |
Small Transit Vehicle Optional Equipment - Mandatory Yes/No Additional Cost or Reduction ($) Comments
| Small Transit Vehicle Optional Equipment - Optional | Yes, No, or N/A | Additional Cost or Reduction ($) | Comments |
| Delete Lift: Delete wheelchair lift and wheelchair entry door. Replace forward-facing flip seats and wheelchair lift/securement with forward-facing aisle seats. Total seated capacity shall be 12 plus the driver. Delete all other lift related items. (Option Must be Available) | |||
| Chassis Size 12,500 GVWR 158" WB (In lieu of the standard chassis size) | |||
| Deluxe Driver’s Seat: USSC G2ELPQR or approved equal. | |||
| Public Information System: The vehicle shall be equipped with a public information system permitting the driver, or recorded human speech messages, to announce stops and provide other passenger information within the vehicle. The system shall consist of, at a minimum, a hand held microphone located within easy reach of the driver, a transmitting power source, and at least one speaker located in such a manner that all messages can be easily heard by all passengers located anywhere in the vehicle. An external speaker shall also be provided. A three position driver switch shall be located in the driver's area that allows activation of inside only, outside only or both PA speakers. The public information system may be incorporated into the vehicle’s AM/FM/Bluetooth radio system. | |||
| Passenger Call Bell System: A passenger call bell or chime system shall be provided to inform the driver and passengers that a stop has been requested. The chime shall be clearly audible to the driver and passengers. When the passenger call bell cord is pulled, the chime shall ring only once. In addition, a light on the dash shall come on informing the driver that a passenger has requested a stop. A ceiling or front header mounted stop requested sign shall also illuminate to notify passengers a stop has been requested. |
The call bell cord shall be yellow, stainless steel cord located within easy reach of all ambulatory passengers and mobility-aid users. It shall be mounted no higher than 48 inches and no lower than 15 inches above the floor, shall be operable with one hand and shall not require tight grasping, pinching or twisting of the wrist. The force required to activate controls shall be no greater than 5 lbf. A switch bell shall be provided on the driver’s console to disable the call bell or chimes when desired.
| Solid Color Paint Scheme: Instead of painting the exterior of the vehicle white or off-white, the entire vehicle (roof and body) shall be painted one solid color from those offered in the manufacturer’s list of available colors. |
| Two-Way Radio Wiring: To allow two-way radio and antenna installation, including a 12 volt power lead with 20 amp fuse, ground plane with interior door, and conduit with pull wire. |
| Locking Fare Box With Two Vaults: A fare box shall be of the type for and include a stainless steel stanchion. The farebox shall be 14.5 inches to 16 inches high, 4 and 3/4 wide, and 6 inches deep (all dimensions are approximate). The mounted height shall be adjustable to a maximum of 36 and 1/2 inches. The farebox will have one vault and will accept dollar bills. Vaults will pull easily from the front of the box for removal and shall lock automatically during the removal. The box shall have an approximate 270 degree viewing area and the fares shall be displayed on a large illuminated inspection plate. The inspection plate dump handle shall be installed on the right side of the fare box. A minimum of two keys shall be provided for the vault. The Respondent shall provide descriptive material of the farebox to be furnished to the purchaser. |
| Changeable Front And Side Destination Signs: Hanover DD054 Front/DD139 Side & OCU Controller. LED sign or approved equal. The Respondent shall provide descriptive material of the destination signs to be furnished as part of the bid. |
| Stainless Steel Full Wheel Covers/Inserts/Liners. |
| Publications: Respondent shall provide one (1) each of the following publications to the purchaser: |
- Bus body parts manual;
| Additional Mobility-Aid Position: Indicate the cost of adding (in addition to the existing positions) one (1) additional mobility-aid position. |
| Dual Language Signage: Provide dual language (English/Spanish) signage, which indicate that seats in the front of the vehicle are priority seats for persons with disabilities, and that other passengers should make such seats available to those who wish to use them. At least one set of forward-facing seats shall be so designated. Each securement location shall have a sign designating it as such. All other standard specifications for signage shall apply. |
| Delete Moveable Arm Rests: on fixed seats (adjacent to aisle) and on flip seats. Credit per seat. |
| Emergency Exit Window(S): In lieu of a rear emergency exit door, the rear of the vehicle shall have a rear emergency exit window with a minimum clear opening of at least 20 inches high by 40 inches wide for emergency escape. The rear emergency window shall be hinged from the top. Window must include interior and exterior Emergency Exit signage and must meet all FMVSS requirements. |
| Emergency Window(S) Ajar Warning: Visual/audible alert, viewable from instrument panel. |
| 6 Inch By 16 Inch Flat Adjustable Inside Mirror |
| Fold Away Seat – Two Passenger: The fold away seat is installed at the mobility aid positions in a vehicle equipped with a lift system. |
The seat shall be attached to the interior wall or floor of the vehicle and should be forward-facing. Any seat securements on the vehicle floor must be flush with the floor. When folded up, the seat shall not interfere with the use of mobility aid positions.
The seat is intended to provide regular passenger seating capacity as a last resort when persons in wheelchairs or other mobility aids are not being transported and are intended to remain folded up until needed. A pin, or lever type device must be used to keep the seat in the up position while the vehicle is in motion, and shall be designed as to prevent any rattling of the seat or seat supports. The seat may vary from the previously stated requirements for both the design and the dimensions of regular passenger seats.
The seat shall be in addition to the basic number of passenger seating positions required in the vehicle and shall not count toward the minimum passenger seating capacity required for this vehicle. The seat shall accommodate two seated adult passenger(s) with reasonable comfort.
Each fold away shall have two seat belts. Each belt shall be equipped with a retractor that keeps the belt webbing or strap off the floor when the belt is not in use.
Each fold away seat shall have a vinyl-covered cushion on the seat and seat back. The color of the seat and seat back cushions shall be the same as those of the regular passenger seats, or they may be black.
The seat shall be designed to remain in a vertical position when folded up and if a spring, or other type of mechanism, is used to return the seat from the horizontal to the vertical position, the return mechanism will not create a safety hazard for a passenger arising from the seat.
Folding, molded armrests shall be provided on all foldaway seats adjacent to an aisle.
Grab rails shall be provided as well.
Fold Away Seat – One Passenger: The fold away seat is installed at the mobility aid positions in a vehicle equipped with a lift system.
The seat shall be attached to the interior wall or floor of the vehicle and should be forward-facing. Any seat securements on the vehicle floor must be flush with the floor. When folded up, the seat shall not interfere with the use of mobility aid positions.
The seat is intended to provide regular passenger seating capacity as a last resort when persons in wheelchairs or other mobility aids are not being transported and are intended to remain folded up until needed. A pin, or lever type device must be used to keep the seat in the up position while the vehicle is in motion, and shall be designed as to prevent any rattling of the seat or seat supports. The seat may vary from the previously stated requirements for both the design and the dimensions of regular passenger seats.
The seat shall be in addition to the basic number of passenger seating positions required in the vehicle and shall not count toward the minimum passenger seating capacity required for this vehicle. The seat shall accommodate one seated adult passenger with reasonable comfort.
Each fold away shall have one seat belt. Each belt shall be equipped with a retractor that keeps the belt webbing or strap off the floor when the belt is not in use.
Each fold away seat shall have a vinyl-covered cushion on the seat and seat back. The color of the seat and seat back cushions shall be the same as those of the regular passenger seats, or they may be black.
The seat shall be designed to remain in a vertical position when folded up and if a spring, or other type of mechanism, is used to return the seat from the horizontal to the vertical position, the return mechanism will not create a safety hazard for a passenger arising from the seat.
Folding, molded armrests shall be provided on all foldaway seats adjacent to an aisle.
Grab rails shall be provided as well.
Flat Floor With No Wheel Wells: In lieu of (or in addition to) the floor described in the specifications, the floor shall be completely flat from the rear of the vehicle to the top step in the vestibule to the right of the driver. If design of the chassis does not allow for the raised floor to be incorporated into the step well, then the additional step can be positioned behind the driver's seat. The floor structure shall consist of a series of lengthwise and cross-sectional steel members (12 gauge minimum).
The height of the lengthwise and cross-sectional members shall be approximately equal with the intent of bringing the top of the composite floor structure to the same elevation as the top of the rear wheelwell housings. Alternative methods of construction yielding the same intent may be permitted with prior approval of INDOT. The raised floor shall provide a minimum of 73 inches of headroom.
The floor shall be constructed of ¾ inch Marine Grade plywood with an aluminum underbelly pan.
| Sure-Lok Cylinder Oxygen Holder | |
| Battery System: Stainless steel pull-out battery tray. | |
| Diagnostic scanner tool, available for purchase if requested | |
| Mandatory Options | FALSE |
| Large Transit Vehicle Optional Equipment - Mandatory | Yes/No | Additional Cost or Reduction ($) | Comments |
| 12 Ambulatory/ 2 W/C Bus Body Size: In lieu of the standard body size. Minimum 156 inch wheelbase. This passenger body size vehicle will incorporate all specifications, dimensions and standard items listed (except floor plans) for the standard body size. Floor plans for the 12 ambulatory/2 wheelchair bus body size will be determined by Respondent and purchaser prior to issuing the purchase order. (Option Must be Available) | |||
| Large Transit Vehicle Optional Equipment | Yes, No, or N/A | Additional Cost or Reduction ($) | Comments |
| Body Length: 270" Overall Length and 26" minimum hip to knee room | |||
| Body Length: 285" Overall Length and 34" minimum hip to knee room. | |||
| Delete Lift: Delete wheelchair lift and wheelchair entry door. Replace forward-facing flip seats and wheelchair lift/securement with forward-facing aisle seats. Total seated capacity shall be 24 plus the driver. Delete all other lift related items. (Option Must be Available) | |||
| Deluxe Driver’s Seat: USSC G2ELP or approved equal. | |||
| Public Information System: The vehicle shall be equipped with a public information system permitting the driver, or recorded human speech messages, to announce stops and provide other passenger information within the vehicle. The system shall consist of, at a minimum, a hand held microphone located within easy reach of the driver, a transmitting power source, and at least one speaker located in such a manner that all messages can be easily heard by all passengers located anywhere in the vehicle. An external speaker shall also be provided. A three position driver switch shall be located in the driver's area that allows activation of inside only, outside only or both PA speakers. The public information system may be incorporated into the vehicle’s AM/FM/CD radio system. | |||
| Passenger Call Bell System: A passenger call bell or chime system shall be provided to inform the driver and passengers that a stop has been requested. The chime shall be clearly audible to the driver and passengers. When the passenger call bell cord is pulled, the chime shall ring only once. In addition, a light on the dash shall come on informing the driver that a passenger has requested a stop. A ceiling or front header mounted stop requested sign shall also illuminate to notify passengers a stop has been requested. |
The call bell cord shall be yellow, stainless steel cord located within easy reach of all ambulatory passengers and mobility-aid users. It shall be mounted no higher than 48 inches and no lower than 15 inches above the floor, shall be operable with one hand and shall not require tight grasping, pinching or twisting of the wrist. The force required to activate controls shall be no greater than 5 lbf. A switch bell shall be provided on the driver’s console to disable the call bell or chimes when desired.
| Solid Color Paint Scheme: Instead of painting the exterior of the vehicle white or off-white, the entire vehicle (roof and body) shall be painted one solid color from those offered in the manufacturer’s list of available colors. |
| Two-Way Radio Wiring: To allow two-way radio and antenna installation, including a 12 volt power lead with 20 amp fuse, ground plane with interior door, and conduit with pull wire. |
| Locking Fare Box With Two Vaults: A fare box shall be of the type for and include a stainless steel stanchion. The farebox shall be 14.5 inches to 16 inches high, 4 and 3/4 wide, and 6 inches deep (all dimensions are approximate). The mounted height shall be adjustable to a maximum of 36 and 1/2 inches. The farebox will have one vault and will accept dollar bills. Vaults will pull easily from the front of the box for removal and shall lock automatically during the removal. The box shall have an approximate 270 degree viewing area and the fares shall be displayed on a large illuminated inspection plate. The inspection plate dump handle shall be installed on the right side of the fare box. A minimum of two keys shall be provided for the vault. The Respondent shall provide descriptive material of the farebox to be furnished to the purchaser. |
| Changeable Front And Side Destination Signs: Hanover DD054 Front/DD139 Side & OCU Controller. LED sign or approved equal. The Respondent shall provide descriptive material of the destination signs to be furnished as part of the bid. |
| Stainless Steel Full Wheel Covers/Inserts/Liners |
| Publications: Respondent shall provide one (1) each of the following publications to the purchaser: |
- Bus body parts manual;
| Additional Mobility-Aid Position: Indicate the cost of adding (in addition to the existing positions) one (1) additional mobility-aid position. Respondent and purchaser will determine the floor plan for vehicles with additional mobility-aid position prior to issuing the purchase order. This option will require the purchaser to add the flat floor option when buying the vehicle. |
| Flat Floor With No Wheel Wells: In lieu of (or in addition to) of the floor described in the specification, the floor shall be completely flat from the rear of the vehicle to just behind the driver. The floor structure shall consist of a series of lengthwise and cross-sectional steel members (12 gauge minimum). |
The height of the lengthwise and cross-sectional members shall be approximately equal with the intent of bringing the top of the composite floor structure to the same elevation as the top of the rear wheelwell housings. Alternative methods of construction yielding the same intent may be permitted with prior approval of INDOT. The raised floor shall provide a minimum of 73 inches of headroom.
The floor shall be constructed of ¾ inch Marine Grade plywood with an aluminum underbelly pan.
| Dual Language Signage: Provide dual language (English/Spanish) signage, which indicate that seats in the front of the vehicle are priority seats for persons with disabilities, and that other passengers should make such seats available to those who wish to use them. At least one set of forward-facing seats shall be so designated. Each securement location shall have a sign designating it as such. All other standard specifications for signage shall apply. |
| Delete Moveable Arm Rests: on fixed seats (adjacent to aisle) and on fold away seats. Credit per seat. |
| Emergency Exit Window(S): In lieu of a rear emergency exit door, the rear of the vehicle shall have a rear emergency exit window with a minimum clear opening of at least 20 inches high by 40 inches wide for emergency escape. The rear emergency window shall be hinged from the top. Window must include interior and exterior Emergency Exit signage and must meet all FMVSS requirements. |
| Emergency Window(S) Ajar Warning: Visual/audible alert, viewable from instrument panel. |
| 6 Inch By 16 Inch Flat Adjustable Inside Mirror |
| Fold Away Seat – Two Passenger: The fold away seat is installed at the mobility aid positions in a vehicle equipped with a lift system. |
The seat shall be attached to the interior wall or floor of the vehicle and should be forward-facing. Any seat securements on the vehicle floor must be flush with the floor. When folded up, the seat shall not interfere with the use of mobility aid positions.
The seat is intended to provide regular passenger seating capacity as a last resort when persons in wheelchairs or other mobility aids are not being transported and are intended to remain folded up until needed. A pin, or lever type device must be used to keep the seat in the up position while the vehicle is in motion, and shall be designed as to prevent any rattling of the seat or seat supports. The seat may vary from the previously stated requirements for both the design and the dimensions of regular passenger seats.
The seat shall be in addition to the basic number of passenger seating positions required in the vehicle and shall not count toward the minimum passenger seating capacity required for this vehicle. The seat shall accommodate two seated adult passenger(s) with reasonable comfort.
Each fold away shall have two seat belts. Each belt shall be equipped with a retractor that keeps the belt webbing or strap off the floor when the belt is not in use.
Each fold away seat shall have a vinyl-covered cushion on the seat and seat back. The color of the seat and seat back cushions shall be the same as those of the regular passenger seats, or they may be black.
The seat shall be designed to remain in a vertical position when folded up and if a spring, or other type of mechanism, is used to return the seat from the horizontal to the vertical position, the return mechanism will not create a safety hazard for a passenger arising from the seat.
Folding, molded armrests shall be provided on all foldaway seats adjacent to an aisle.
Grab rails shall be provided as well.
Fold Away Seat – One Passenger: The fold away seat is installed at the mobility aid positions in a vehicle equipped with a lift system.
The seat shall be attached to the interior wall or floor of the vehicle and should be forward-facing. Any seat securements on the vehicle floor must be flush with the floor. When folded up, the seat shall not interfere with the use of mobility aid positions.
The seat is intended to provide regular passenger seating capacity as a last resort when persons in wheelchairs or other mobility aids are not being transported and are intended to remain folded up until needed. A pin, or lever type device must be used to keep the seat in the up position while the vehicle is in motion, and shall be designed as to prevent any rattling of the seat or seat supports. The seat may vary from the previously stated requirements for both the design and the dimensions of regular passenger seats.
The seat shall be in addition to the basic number of passenger seating positions required in the vehicle and shall not count toward the minimum passenger seating capacity required for this vehicle. The seat shall accommodate one seated adult passenger with reasonable comfort.
Each fold away shall have one seat belt. Each belt shall be equipped with a retractor that keeps the belt webbing or strap off the floor when the belt is not in use.
Each fold away seat shall have a vinyl-covered cushion on the seat and seat back. The color of the seat and seat back cushions shall be the same as those of the regular passenger seats, or they may be black.
The seat shall be designed to remain in a vertical position when folded up and if a spring, or other type of mechanism, is used to return the seat from the horizontal to the vertical position, the return mechanism will not create a safety hazard for a passenger arising from the seat.
Folding, molded armrests shall be provided on all foldaway seats adjacent to an aisle.
A grab rail shall be provided as well.
| Sure-Lok Cylinder Oxygen Holder | ||||
| Battery System: Stainless steel pull-out battery tray. | ||||
| Diagnostic scanner tool, available for purchase if requested | ||||
| Mandatory Options | FALSE | |||
| YES | ||||
| NO | ||||
| N/A | ||||
| Ford Transit Cutaway - Optional | Yes, No, or N/A | Additional Cost or Reduction ($) | Comments | |
| Delete Lift: Delete wheelchair lift and wheelchair entry door. Replace forward-facing flip seats and wheelchair lift/securement with forward-facing aisle seats. Total seated capacity shall be 12 plus the driver. Delete all other lift related items. (Option Must be Available) | ||||
| Deluxe Driver’s Seat: USSC G2ELPQR or approved equal. | ||||
| Public Information System: The vehicle shall be equipped with a public information system permitting the driver, or recorded human speech messages, to announce stops and provide other passenger information within the vehicle. The system shall consist of, at a minimum, a hand held microphone located within easy reach of the driver, a transmitting power source, and at least one speaker located in such a manner that all messages can be easily heard by all passengers located anywhere in the vehicle. An external speaker shall also be provided. A three position driver switch shall be located in the driver's area that allows activation of inside only, outside only or both PA speakers. The public information system may be incorporated into the vehicle’s AM/FM/Bluetooth radio system. | ||||
| Passenger Call Bell System: A passenger call bell or chime system shall be provided to inform the driver and passengers that a stop has been requested. The chime shall be clearly audible to the driver and passengers. When the passenger call bell cord is pulled, the chime shall ring only once. In addition, a light on the dash shall come on informing the driver that a passenger has requested a stop. A ceiling or front header mounted stop requested sign shall also illuminate to notify passengers a stop has been requested. |
The call bell cord shall be yellow, stainless steel cord located within easy reach of all ambulatory passengers and mobility-aid users. It shall be mounted no higher than 48 inches and no lower than 15 inches above the floor, shall be operable with one hand and shall not require tight grasping, pinching or twisting of the wrist. The force required to activate controls shall be no greater than 5 lbf. A switch bell shall be provided on the driver’s console to disable the call bell or chimes when desired.
| Solid Color Paint Scheme: Instead of painting the exterior of the vehicle white or off-white, the entire vehicle (roof and body) shall be painted one solid color from those offered in the manufacturer’s list of available colors. |
| Two-Way Radio Wiring: To allow two-way radio and antenna installation, including a 12 volt power lead with 20 amp fuse, ground plane with interior door, and conduit with pull wire. |
| Locking Fare Box With Two Vaults: A fare box shall be of the type for and include a stainless steel stanchion. The farebox shall be 14.5 inches to 16 inches high, 4 and 3/4 wide, and 6 inches deep (all dimensions are approximate). The mounted height shall be adjustable to a maximum of 36 and 1/2 inches. The farebox will have one vault and will accept dollar bills. Vaults will pull easily from the front of the box for removal and shall lock automatically during the removal. The box shall have an approximate 270 degree viewing area and the fares shall be displayed on a large illuminated inspection plate. The inspection plate dump handle shall be installed on the right side of the fare box. A minimum of two keys shall be provided for the vault. The Respondent shall provide descriptive material of the farebox to be furnished to the purchaser. |
| Changeable Front And Side Destination Signs: Hanover DD054 Front/DD139 Side & OCU Controller. LED sign or approved equal. The Respondent shall provide descriptive material of the destination signs to be furnished as part of the bid. |
| Stainless Steel Full Wheel Covers/Inserts/Liners. |
| Publications: Respondent shall provide one (1) each of the following publications to the purchaser: |
- Bus body parts manual;
| Additional Mobility-Aid Position: Indicate the cost of adding (in addition to the existing positions) one (1) additional mobility-aid position. |
| Dual Language Signage: Provide dual language (English/Spanish) signage, which indicate that seats in the front of the vehicle are priority seats for persons with disabilities, and that other passengers should make such seats available to those who wish to use them. At least one set of forward-facing seats shall be so designated. Each securement location shall have a sign designating it as such. All other standard specifications for signage shall apply. |
| Delete Moveable Arm Rests: on fixed seats (adjacent to aisle) and on flip seats. Credit per seat. |
| Emergency Exit Window(S): In lieu of a rear emergency exit door, the rear of the vehicle shall have a rear emergency exit window with a minimum clear opening of at least 20 inches high by 40 inches wide for emergency escape. The rear emergency window shall be hinged from the top. Window must include interior and exterior Emergency Exit signage and must meet all FMVSS requirements. |
| Emergency Window(S) Ajar Warning: Visual/audible alert, viewable from instrument panel. |
| 6 Inch By 16 Inch Flat Adjustable Inside Mirror |
| Fold Away Seat – Two Passenger: The fold away seat is installed at the mobility aid positions in a vehicle equipped with a lift system. |
The seat shall be attached to the interior wall or floor of the vehicle and should be forward-facing. Any seat securements on the vehicle floor must be flush with the floor. When folded up, the seat shall not interfere with the use of mobility aid positions.
The seat is intended to provide regular passenger seating capacity as a last resort when persons in wheelchairs or other mobility aids are not being transported and are intended to remain folded up until needed. A pin, or lever type device must be used to keep the seat in the up position while the vehicle is in motion, and shall be designed as to prevent any rattling of the seat or seat supports. The seat may vary from the previously stated requirements for both the design and the dimensions of regular passenger seats.
The seat shall be in addition to the basic number of passenger seating positions required in the vehicle and shall not count toward the minimum passenger seating capacity required for this vehicle. The seat shall accommodate two seated adult passenger(s) with reasonable comfort.
Each fold away shall have two seat belts. Each belt shall be equipped with a retractor that keeps the belt webbing or strap off the floor when the belt is not in use.
Each fold away seat shall have a vinyl-covered cushion on the seat and seat back. The color of the seat and seat back cushions shall be the same as those of the regular passenger seats, or they may be black.
The seat shall be designed to remain in a vertical position when folded up and if a spring, or other type of mechanism, is used to return the seat from the horizontal to the vertical position, the return mechanism will not create a safety hazard for a passenger arising from the seat.
Folding, molded armrests shall be provided on all foldaway seats adjacent to an aisle.
Grab rails shall be provided as well.
Fold Away Seat – One Passenger: The fold away seat is installed at the mobility aid positions in a vehicle equipped with a lift system.
The seat shall be attached to the interior wall or floor of the vehicle and should be forward-facing. Any seat securements on the vehicle floor must be flush with the floor. When folded up, the seat shall not interfere with the use of mobility aid positions.
The seat is intended to provide regular passenger seating capacity as a last resort when persons in wheelchairs or other mobility aids are not being transported and are intended to remain folded up until needed. A pin, or lever type device must be used to keep the seat in the up position while the vehicle is in motion, and shall be designed as to prevent any rattling of the seat or seat supports. The seat may vary from the previously stated requirements for both the design and the dimensions of regular passenger seats.
The seat shall be in addition to the basic number of passenger seating positions required in the vehicle and shall not count toward the minimum passenger seating capacity required for this vehicle. The seat shall accommodate one seated adult passenger with reasonable comfort.
Each fold away shall have one seat belt. Each belt shall be equipped with a retractor that keeps the belt webbing or strap off the floor when the belt is not in use.
Each fold away seat shall have a vinyl-covered cushion on the seat and seat back. The color of the seat and seat back cushions shall be the same as those of the regular passenger seats, or they may be black.
The seat shall be designed to remain in a vertical position when folded up and if a spring, or other type of mechanism, is used to return the seat from the horizontal to the vertical position, the return mechanism will not create a safety hazard for a passenger arising from the seat.
Folding, molded armrests shall be provided on all foldaway seats adjacent to an aisle.
Grab rails shall be provided as well.
Flat Floor With No Wheel Wells: In lieu of (or in addition to) the floor described in the specifications, the floor shall be completely flat from the rear of the vehicle to the top step in the vestibule to the right of the driver. If design of the chassis does not allow for the raised floor to be incorporated into the step well, then the additional step can be positioned behind the driver's seat. The floor structure shall consist of a series of lengthwise and cross-sectional steel members (12 gauge minimum).
The height of the lengthwise and cross-sectional members shall be approximately equal with the intent of bringing the top of the composite floor structure to the same elevation as the top of the rear wheelwell housings. Alternative methods of construction yielding the same intent may be permitted with prior approval of INDOT. The raised floor shall provide a minimum of 73 inches of headroom.
The floor shall be constructed of ¾ inch Marine Grade plywood with an aluminum underbelly pan.
| Sure-Lok Cylinder Oxygen Holder | |
| Battery System: Stainless steel pull-out battery tray. | |
| Diagnostic scanner tool, available for purchase if requested | |
| Mandatory Options | FALSE |
Additional Options - not needed
| Mobility Vans, 26-84944 |
| Attachment D - Cost Proposal Template |
| Additional Equipment Options |
| Please provide any additional equipment and pricing below. Select the type of vehicle from the drop-down list, and enter the name, description, and cost of the optional equipment. |
Please review line 1 and provide a price if applicable or suggest other options below.
Vehicle Type Optional Equipment Discription Cost ($)
File details come from the government source that posted it. Updated .