Att_2_-_Specification_Response_Matrix.xlsx
XLSX spreadsheet 62 KB Posted
- Attached to
- Harbor Security Boat
- Solicitation number
- N00024-21-R-2295
About this file
This document contains an attachment to a solicitation for harbor security boats. The Navy seeks up to twenty-six boats through this request for proposal. The attachment provides an specification response matrix for offerors to complete, detailing key boat characteristics such as length, beam, fuel capacity, speed, and structural design. Offerors must indicate whether their proposed boat complies with or takes exception to each technical requirement. Exceptions must include rationale and alternative approaches meeting minimum needs. The full solicitation is available from the website listed. Inquiries should be directed to the named contracting staff.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 7.pdf | ||
| Amendment 6.pdf | ||
| Amendment 5.pdf | ||
| Attachment 1_SSP HSB Specification_REV C 09Apr21.pdf | ||
| Amendment 4.pdf | ||
| Amendment 3.pdf | ||
| Amendment 2.pdf | ||
| Amendment 1.pdf | ||
| Attachment 1_SSP HSB Specification_REV B 23Feb2021.pdf | ||
| Att_8_-_CLIN Pricing Chart Rev A.xls | XLS spreadsheet | |
| Att_10_-_Past_Performance_Questionnaire.doc | DOC document | |
| N00024-21-R-2295 Solicitation.pdf | ||
| Att_6_-_Warranty_Terms Rev A.docx | DOCX document | |
| Att_5_-_Unique_Item_Identification_(UID).doc | DOC document | |
| Att_4_-_Techncial_Data_Rights.pdf | ||
| Att_7_-_HSB_Production_Schedule Rev A.xlsx | XLSX spreadsheet | |
| Att_9_-_Past_Performance_Information.doc | DOC document | |
| Att_3_-_Vendor_Provided_Spares_Parts_List Rev A.xlsx | XLSX spreadsheet |
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix N00024-21-R-2295 Attachment 2
| SSP HARBOR SECURITY BOAT |
| SPECIFICATION RESPONSE MATRIX |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response (See Note 1) 070-1 Enter Length Overall (LOA) including collar and appendages: xx.xx feet (ft) [Shall be no less than 33 ft and no greater than 42 ft per Section 042]
| 070-1 | Enter Hull Length (welded structure only): xx.xx ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft |
[Shall be less than or equal to 144 inches per Section 084]
| 070-1 | Enter Chine Beam: xx.x ft |
| 070-1 | Enter Height, Keel to Fixed Structure: xx.x ft |
| 070-1 | Enter Height, Keel to Moveable Structure: xx.x ft |
| 070-1 | Enter Height on trailer when rigged for transport: xx.x ft |
[Shall be less than or equal to 162 inches per Section 084] 070-1 Enter Width on trailer when rigged for transport: xx.x ft [Shall be less than or equal to 144 inches per Section 084]
| 070-1 | Enter Height from waterline to fixed structure: xx.x ft |
| 070-1 | Enter Deadrise at midships: xx.x degrees |
| 070-1 | Enter Deadrise at transom: xx.x degress |
| 070-1 | Enter Total Installed Fuel Capacity: xxxx gallons |
[Shall be minimum 300 gallons or 24 hours of operation at the defined Operational Profile per Sections 050 and 541]
| 070-1 | Enter Full Load [per Section 070]: xx,xxx pounds incl x% construction or build margin or both |
| 070-1 | Enter Longitudinal Center of Gravity (LCG) at Full Load: xx.x ft forward of transom and keel intersect |
| 070-1 | Enter Static Draft at Full Load: x.x ft |
[Shall be maximum 36 inches per Section 050] 070-1 Enter Sprint Speed: xx knots at Full Load in calm water [Shall be at least 35 knots per Section 050]
| 084-2 | Trailer shall be make and model |
| 100-1 | General Requirements for Hull Structure - Provide a description of structural methodology. |
| 166-1 | Provide a description of collar design and identify foam materials |
| 314-1 | Inverter (24VDC to 120 VAC) - Make and Model and Quantity |
| 512-1 | Manned Compartment Fresh Air Ventilation - Make and Model |
| All | SSP Harbor Security Boat Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-4. |
| Offeror's Notes: |
&G &12RFP N00024-21-R-2240 &10
&P of &N
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT X |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 40.5 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 39.5 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 16.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 2,100 rpm |
| 070-2 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat X Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 581-1: Exception: Offeror has no local distributor for Fortress anchors and has assessed alternatives in accordance with Specification Section 042-3. Offeror proposes a BrandX Model xxx123 anchor in lieu of a Fortress anchor specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has provided BrandX anchors in 300 boats in similar sizes and applications. |
RFP N00024-17-R-2216
image1.png
File details come from the government source that posted it. Updated .