Appendix E - Sample Apprenticeship Utilization Certifications.pdf
PDF 70 KB Posted
- Solicitation number
- IFB1 CBAA 2027000027 1
- Issued by
- El Paso County, Colorado
About this file
This is an Apprenticeship Utilization Certification form issued by the State of Colorado Office of the State Architect, State Buildings Program. The certification applies to public construction projects valued at $1 million or more and requires general contractors to document that all identified subcontractors in specified trades participate in registered apprenticeship programs. The covered trades include mechanical, sheet metal, fire suppression, sprinkler fitting, plumbing, and electrical work. General contractors must certify that all participating firms have demonstrated a proven record of graduating apprentices at a minimum rate of 15 percent for at least three of the past five years, with supporting documentation provided by the United States Department of Labor's Office of Apprenticeship.
The certification requires general contractors to complete and submit the form, which becomes publicly available through the contracting agency's website within 30 days of submission. Contractors must provide additional documentation regarding affected apprenticeship training programs upon request. The State may pursue enforcement actions, including immediate subcontractor termination, contractor debarment pursuant to C.R.S. 24-109-105, and other legal remedies if a subcontractor willfully falsifies documentation or misrepresents qualifications. This requirement is mandated by C.R.S. 24-92-115, enacted through Senate Bill 19-196.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SBP-2.1 Apprenticeship Certification Page 1 of 2 Rev. 06/2025
State of Colorado Office of the State Architect State Buildings Program
Apprenticeship Utilization Certification (Public Projects of $1 million or more)
Institution/Agency:
Project No./Name:
General Contractor:
For each trade listed below attach documentation that all firms identified participate in apprenticeship programs as described in the Certification Statement below.
Trade Subcontractor Union Certification
Mechanical
Sheet Metal
Fire Suppression
Sprinkler Fitting
Plumbing
Electrical
Certification Statement § 24-92-115, C.R.S. (SB 19-196)
The above named General Contractor certifies and agrees as follows:
That all firms identified above participate in apprenticeship programs registered with the
United States Department of Labor’s Employment and Training Administration or state apprenticeship councils recognized by the United States Department of Labor and have a proven record of graduating apprentices at a minimum of fifteen percent of its apprentices for at least three of the past five years. The General Contractor shall supply supporting documentation from the United States Department of Labor’s office of apprenticeship verifying the certification.
The above documentation shall be made publicly available by the contracting agency through its website within thirty (30) days from when it is submitted.
The General Contractor shall agree to provide additional documentation to the contracting agency regarding affected apprenticeship training programs relating to the requirements above. If a contracting agency determines that a subcontractor has willfully
SBP-2.1 Apprenticeship Certification Page 2 of 2 Rev. 06/2025 falsified documentation or willfully misrepresented their qualifications, the agency shall direct the General Contractor to terminate the subcontractor contract immediately and the subcontractor will be immediately removed from the public project. At the discretion of the Director of the Department of Personnel, the State may initiate the process to debar the General Contractor pursuant to § 24-109-105, C.R.S., and may pursue any other remedy provided by law.
CERTIFIED and AGREED to this day of , 20 .
General Contractor:
Full Legal Name
By:
| Apprenticeship Utilization Certification |
| Certification Statement § 24-92-115, C.R.S. (SB 19-196) |
| InstitutionAgency: |
| Project NoName: |
| General Contractor: |
| SubcontractorMechanical: |
| Union CertificationMechanical: |
| SubcontractorSheet Metal: |
| Union CertificationSheet Metal: |
| SubcontractorFire Suppression: |
| Union CertificationFire Suppression: |
| SubcontractorSprinkler Fitting: |
| Union CertificationSprinkler Fitting: |
| SubcontractorPlumbing: |
| Union CertificationPlumbing: |
| SubcontractorElectrical: |
| Union CertificationElectrical: |
| CERTIFIED and AGREED to this: |
| day of: |
| Full Legal Name: |
| By: |
| 20: |
File details come from the government source that posted it. Updated .